Texas Instruments

MAX3221IPWRG4 - 250kbps RS-232 IC | Texas Instruments

Référence : MAX3221IPWRG4 ✓ Actif
3 V to 5.5 V Vdss 1 µA typical Id 16-pin TSSOP Package
MOQ : 1 |

MAX3221IPWRG4 Présentation

Texas Instruments MAX3221IPWRG4 is a single-channel RS-232 line driver and receiver interface IC operating from a 3 V to 5.5 V supply at up to 250 kbps. It provides one driver, one receiver with a dedicated enable pin, a dual charge-pump circuit, and ±15 kV ESD protection on the bus pins. The device is packaged in a 16-pin TSSOP.

An RS-232 transceiver is an interface IC that converts logic-level signals between a host controller and a serial communications link. It belongs to the interface IC hierarchy and combines a line driver, line receiver, voltage conversion, and electrostatic-discharge protection. This integration allows a UART controller operating at 3.3 V or 5 V to communicate with equipment using the TIA/EIA-232-F electrical interface.

The MAX3221 supports a 3 V to 5.5 V supply, accepts 5 V logic input with a 3.3 V supply, and operates at data rates up to 250 kbps. Its dual charge-pump circuit supports the positive and negative RS-232 voltage levels using four external 0.1 µF capacitors. Low standby current of 1 µA is useful when the receiver or transmitter must remain powered while conserving system energy.

The ±15 kV human-body-model ESD rating applies to the RS-232 bus connections, including ground, and adds protection at the external interface where cables and connectors can expose the circuit to electrostatic discharge. The receiver includes a dedicated enable function, giving the host hardware control over when the received data path is active. The interface meets or exceeds TIA/EIA-232-F and ITU V.28 requirements.

Typical uses include single-port RS-232 links in industrial controllers, test equipment, point-of-sale systems, instrumentation, and service interfaces. The device is especially suitable where a compact design needs bidirectional signal translation, low standby consumption, and built-in bus-pin ESD protection without implementing a discrete charge-pump circuit.

Design with the four external charge-pump capacitors positioned close to their associated pins. Keep the RS-232 connector-side traces away from sensitive analog or high-speed digital paths, provide a reliable chassis or signal-ground connection, and evaluate additional protection when exposed cables exceed the device's ±15 kV HBM rating.

This page combines manufacturer specifications, package details, practical interface-design guidance, and same-footprint replacement options to support component selection, schematic review, PCB layout, and sourcing decisions for the MAX3221IPWRG4.

Alternatives de remplacement direct pour MAX3221IPWRG4 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec MAX3221IPWRG4 (même facteur de forme et même empreinte) — différant par ESD Protection, Package, Logic Input Compatibility, Maximum Data Rate, Number of Drivers.

Texas Instruments
ESD Protection: ±15 kV pin-to-pin
Package: TSSOP-16
Maximum Data Rate: 250 kbit/s
Comparer avec MAX3221IPWRG4 →
Texas Instruments
ESD Protection: ±15 kV
Package: 16-pin TSSOP, 4.40 mm width
Logic Input Compatibility: Accepts 5 V logic input with a 3.3 V supply
Comparer avec MAX3221IPWRG4 →
Texas Instruments
ESD Protection: ±15 kV on serial-port connection pins
Logic Input Compatibility: Accepts 5 V logic input with a 3.3 V supply
Number of Drivers: 1 driver
Comparer avec MAX3221IPWRG4 →

MAX3221IPWG4

✅ Remplacement direct
Texas Instruments
📦 16-pin TSSOP
Single-channel RS-232 line driver/receiver · 3 V to 5.5 V · 250 kbps · 1 · 1 · ±15 kV · 1 µA · 3.3 V and 5 V RS-232 interface

Contactez-nous pour le prix

Voir la fiche technique →

MAX3221CPWRG4

✅ Remplacement direct
Texas Instruments
📦 16-pin TSSOP
Single-channel RS-232 line driver and receiver · 3 V to 5.5 V · 250 kbit/s · 1 · 1 · 1/1 full-duplex transceiver · ±15 kV · TIA/EIA-232-F

Contactez-nous pour le prix

Voir la fiche technique →

MAX3221CPWE4

✅ Remplacement direct
Texas Instruments
📦 16-pin TSSOP
Single-channel RS-232 line driver/receiver · 3 V to 5.5 V · 1 · 1 · ±15 kV · Dual charge pump · Dedicated enable function · 16-pin TSSOP

Contactez-nous pour le prix

Voir la fiche technique →

MAX3221IPW

✅ Remplacement direct
Texas Instruments
📦 16-pin TSSOP
Single-channel RS-232 line driver/receiver · 1 driver · 1 receiver with dedicated enable pin · 3 V to 5.5 V · 250 kbps · ±15 kV on serial-port connection pins · TIA/EIA-232-F · Dual charge-pump circuit

Contactez-nous pour le prix

Voir la fiche technique →

MAX3221CPW

✅ Remplacement direct
Texas Instruments
📦 16-pin TSSOP
Single-channel RS-232 line driver/receiver · 3 V to 5.5 V · 250 kbit/s · ±15 kV pin-to-pin · 1 · 1 · Dedicated enable pin · Dual charge-pump circuit

Contactez-nous pour le prix

Voir la fiche technique →

MAX3221IPWRG4 Spécifications

Device Type Single-channel RS-232 line driver/receiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
Number of Drivers 1
Number of Receivers 1
Receiver Enable Dedicated enable pin
ESD Protection ±15 kV HBM
Standby Current 1 µA typical
External Charge-Pump Capacitors 4 × 0.1 µF
Logic Input Compatibility Accepts 5 V logic input with 3.3 V supply
RS-232 Compliance TIA/EIA-232-F
ITU Compliance ITU V.28
Boîtier 16-pin TSSOP
Type de montage Surface mount
ESD Test Method Human body model (HBM)
Charge-Pump Architecture Dual charge-pump circuit

Guide de configuration des broches du MAX3221IPWRG4 16-pin tssop

Configuration des broches du MAX3221IPWRG4 (boîtier 16-pin tssop). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 16-pin tssop pour le MAX3221IPWRG4

Aucune donnée de brochage détaillée disponible pour MAX3221IPWRG4.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MAX3221IPWRG4 convient pour 6 applications: Industrial Controller Serial Port, Test and Measurement Equipment, Point-of-Sale Terminal, Embedded Service and Configuration Port, Instrumentation and Data Acquisition, Legacy Equipment Upgrade.

🏭

Industrial Controller Serial Port

The MAX3221IPWRG4 fits industrial controllers that require one RS-232 communications channel alongside a 3.3 V or 5 V host controller. Its 3 V to 5.5 V operating range and ability to accept 5 V logic input with a 3.3 V supply simplify mixed-voltage interfaces. The one-driver/one-receiver arrangement supports full-duplex serial links at up to 250 kbps, while the dedicated receiver enable lets firmware control the receive path. For exposed equipment connections, the ±15 kV HBM bus-pin protection adds resilience beyond ordinary unprotected logic interfaces.

🔧

Test and Measurement Equipment

The MAX3221IPWRG4 is appropriate for test instruments and service equipment that exchange RS-232 commands with a host PC or controller. A data rate of up to 250 kbps is sufficient for many configuration, logging, and legacy peripheral links, while the 3 V to 5.5 V supply range supports both older instrumentation and newer embedded control electronics. Its 1 µA typical standby current is useful during idle intervals, and the dedicated receiver enable supports orderly power-state management in multi-function test systems.

🖥️

Point-of-Sale Terminal

The MAX3221IPWRG4 can connect a compact point-of-sale controller to a peripheral using a single RS-232 channel. The device's one-driver/one-receiver configuration is sufficient for a full-duplex point-to-point link, and its 250 kbps maximum rate accommodates common transaction, status, and peripheral-control traffic. Operation from 3 V to 5.5 V allows the interface to share either a 3.3 V or 5 V system rail. The ±15 kV HBM protection on the bus pins is particularly relevant when the cable port is accessible to users.

🧩

Embedded Service and Configuration Port

The MAX3221IPWRG4 is useful in embedded systems that retain an RS-232 configuration, diagnostic, or field-service connector. Its dual charge-pump circuit generates the positive and negative RS-232 signal levels required by the interface without a separate external power-supply circuit. The receiver enable provides a simple way for the host controller to isolate the receive function when it is not needed. With a 16-pin TSSOP package, the device supports compact designs while preserving compatibility with established TIA/EIA-232-F equipment.

📺

Instrumentation and Data Acquisition

The MAX3221IPWRG4 can provide the electrical RS-232 interface for compact instrumentation, laboratory equipment, and data-acquisition controllers. A 250 kbps maximum rate supports many command and measurement-data protocols while minimizing board area through the 16-pin TSSOP package. The 3 V to 5.5 V range accommodates both legacy 5 V logic and 3.3 V systems, and the receiver enable can assist in controlled measurement sequences. The four required 0.1 µF capacitors should be positioned close to the charge-pump pins to maintain a compact, low-impedance switching loop.

🔧

Legacy Equipment Upgrade

The MAX3221IPWRG4 allows modern electronics to communicate with legacy RS-232 equipment without designing a discrete multi-level transceiver. The integrated charge pump handles voltage conversion, the driver and receiver handle logical-to-RS-232 signal translation, and the bus pins include ±15 kV HBM ESD protection. Operation at up to 250 kbps supports legacy peripherals, service consoles, and programming equipment. When replacing an older interface, verify connector signal assignments, ground continuity, cable length, and whether the connected equipment uses hardware handshaking.

What is the MAX3221IPWRG4?
The MAX3221IPWRG4 is a Texas Instruments single-channel RS-232 line driver and receiver rated for operation from 3 V to 5.5 V at data rates up to 250 kbps. According to the manufacturer datasheet, it combines one driver, one receiver with a dedicated enable pin, a dual charge-pump circuit, and ±15 kV HBM ESD protection in a 16-pin TSSOP package. It is designed to interface an asynchronous communication controller with an RS-232 connector.
What are the key specifications of MAX3221IPWRG4 that engineers should know?
The MAX3221IPWRG4 operates from 3 V to 5.5 V, supports up to 250 kbps, and provides one RS-232 driver and one receiver. According to the Texas Instruments datasheet, its key features include 1 µA typical standby current, four external 0.1 µF charge-pump capacitors, acceptance of 5 V logic inputs with a 3.3 V supply, and ±15 kV HBM protection on the serial-port connections including ground.
Where can I download the MAX3221IPWRG4 datasheet PDF?
The official MAX3221 product page is the appropriate source for the MAX3221IPWRG4 datasheet, ordering information, and technical documentation. It identifies the part as a 3 V to 5.5 V, single-channel, 250 kbps RS-232 line driver and receiver with ±15 kV ESD protection. Use the device-specific ordering page to confirm package, temperature, and reel configuration details before releasing a production BOM.
Where can I find the MAX3221IPWRG4 pinout?
The MAX3221IPWRG4 pinout is shown in the pin-description and package-drawing sections of the Texas Instruments MAX3221 datasheet. The exact terminal names and physical arrangement should be assigned from that diagram when laying out the 16-pin TSSOP footprint. The distributor and third-party document links on this page are useful for discovery, but the manufacturer document remains the controlling reference for PCB routing and review.
How much voltage does the MAX3221IPWRG4 require?
The MAX3221IPWRG4 requires a supply voltage between 3 V and 5.5 V. According to the Texas Instruments product documentation, the interface also accepts 5 V logic input when operated from a 3.3 V supply. This combination supports both conventional 5 V RS-232 designs and mixed-voltage systems in which a newer host controller operates from a 3.3 V rail.
What is the maximum data rate of MAX3221IPWRG4?
The MAX3221IPWRG4 supports a maximum data rate of 250 kbps. According to the manufacturer datasheet, the single transmitter and single receiver are intended for asynchronous serial-port communications and meet or exceed TIA/EIA-232-F and ITU V.28 electrical requirements. Application firmware and the connected UART must also support the selected baud rate, while cable length and signal integrity may impose a lower practical limit.
What can replace the MAX3221IPWRG4?
A replacement must use the same 16-pin TSSOP footprint and preserve the MAX3221IPWRG4 supply range, 250 kbps data rate, one-driver/one-receiver configuration, and charge-pump pin arrangement. The MAX3221IPWG4, MAX3221CPWRG4, MAX3221CPWE4, MAX3221IPW, and MAX3221CPW are same-family candidates identified by the manufacturer comparison and cross-reference results. Confirm temperature grade, enable behavior, package drawing, and lifecycle status before substitution.
Is MAX3221IPWG4 the same as MAX3221IPWRG4?
The MAX3221IPWG4 and MAX3221IPWRG4 are members of the same MAX3221 family and are identified as replaceable ordering variants. The defining MAX3221 electrical characteristics are a 3 V to 5.5 V supply, one driver, one receiver, and operation up to 250 kbps. Before treating the parts as interchangeable, verify the exact package drawing, temperature grade, tape-and-reel orientation, and manufacturer ordering information.
What is the best TI equivalent for MAX3221IPWRG4?
The closest same-family TI candidates are the MAX3221IPWG4 and MAX3221CPW variants because they use the MAX3221 interface architecture and the same 16-pin TSSOP format. According to the Texas Instruments MAX3221 ordering information, the core electrical ratings remain 3 V to 5.5 V operation and 250 kbps communication. Review the specific suffix and package drawing because ordering codes can encode temperature grade, green-compliance status, or shipping format.
When should I choose MAX3221IPWRG4 over MAX3221CPWRG4?
Choose the MAX3221IPWRG4 when its exact ordering code, temperature grade, and qualification records match the finished equipment. The MAX3221CPWRG4 is a closely related TI option identified in comparison data with the same 3 V to 5.5 V supply, one transmitter, one receiver, and 16-pin TSSOP package. The decisive factors are certified ordering conditions, regulatory requirements, and exact pin-to-pin qualification rather than nominal interface speed.
Is MAX3221IPWRG4 suitable for an industrial RS-232 controller?
The MAX3221IPWRG4 is suitable for a compact industrial RS-232 interface when its qualified operating-temperature range and ESD level satisfy the equipment requirements. Its 3 V to 5.5 V supply range, 250 kbps maximum rate, dedicated receiver enable, and ±15 kV HBM bus-pin protection are useful for controller and service-port designs. Confirm temperature, isolation, grounding, and cable-protection requirements before production release.
Does the MAX3221IPWRG4 need external charge-pump capacitors?
The MAX3221IPWRG4 requires four external 0.1 µF capacitors to operate its dual charge-pump circuit. According to the Texas Instruments datasheet, these capacitors support the positive and negative RS-232 voltage levels required by the interface. Place each capacitor close to its associated device pin and follow the recommended PCB layout to minimize loop area and preserve signal and power integrity.
Where can I buy MAX3221IPWRG4 online and what is its price?
Use the Request a Quote form on this page to request current MAX3221IPWRG4 pricing, stock confirmation, and lead time for the exact 16-pin TSSOP ordering configuration. The available listing information identifies the part and its technical description, but it does not provide a qualifying quantity-break price table for this exact MPN. Submit the required quantity, target date, and shipment location with the quote request.
Is MAX3221IPWRG4 in stock and what is the lead time?
Current MAX3221IPWRG4 stock and lead time should be confirmed through the Request a Quote form on this page. The part is identified as an active MAX3221 ordering configuration, but an active lifecycle status does not by itself establish available inventory or a delivery interval. Include your requested quantity, production schedule, and permitted substitutes in the request so procurement can confirm the exact supply position.
What RS-232 standards does MAX3221IPWRG4 meet?
The MAX3221IPWRG4 meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28. According to the Texas Instruments datasheet, it provides the electrical interface between an asynchronous communication controller and an RS-232 serial-port connection. Its one-driver/one-receiver arrangement and dual charge pump implement the positive and negative voltage signaling required by those RS-232 specifications.
How should the MAX3221IPWRG4 be protected on an external RS-232 port?
Use the MAX3221IPWRG4's ±15 kV HBM protection as the first line of defense on each bus connection, including ground, but apply additional surge and ESD protection when the connector is exposed to severe industrial transients. According to the manufacturer datasheet, the device includes pin-to-pin ESD protection on the serial-port connections. Keep connector-side protection close to the connector, preserve a short ground path, and keep high-energy transient paths away from sensitive circuitry.

Données de référence d'ingénierie pour MAX3221IPWRG4 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the MAX3221IPWRG4 for a single RS-232 channel requiring a 3 V to 5.5 V supply, operation up to 250 kbps, a dedicated receiver-enable function, and ±15 kV HBM protection in a 16-pin TSSOP package. The MAX3221IPWG4, MAX3221CPWRG4, MAX3221CPWE4, MAX3221IPW, and MAX3221CPW are same-family alternatives with closely matching core interface specifications. Select a replacement primarily by confirming the exact temperature grade, qualification, package drawing, shipping format, enable behavior, and lifecycle status rather than by nominal data rate. This part is appropriate for legacy-compatible industrial, instrumentation, service-port, and point-of-sale links. It should not be selected for multi-channel RS-232, differential RS-485, or RS-422 systems, and its integrated ESD rating should be supplemented when the external cable is exposed to transients beyond the specified HBM test.

Comparaison avec les alternatives

Paramètre Ce produit MAX3221IPWG4 MAX3221CPWRG4 MAX3221CPWE4 MAX3221IPW MAX3221CPW
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP
Device Type Single-channel RS-232 line driver/receiver MAX3221 single-channel RS-232 interface Single transmitter/receiver RS-232 interface MAX3221 single-channel RS-232 interface MAX3221 single-channel RS-232 interface MAX3221 single-channel RS-232 interface
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 250 kbps 250 kbps 250 kbps 250 kbps 250 kbps 250 kbps
Number of Drivers 1 1 1 1 1 1
Number of Receivers 1 1 1 1 1 1
External Charge-Pump Capacitors 4 × 0.1 µF 4 × 0.1 µF 4 × 0.1 µF 4 × 0.1 µF 4 × 0.1 µF 4 × 0.1 µF
ESD Protection ±15 kV HBM ±15 kV HBM ±15 kV HBM ±15 kV HBM ±15 kV HBM ±15 kV HBM
RS-232 Compliance TIA/EIA-232-F and ITU V.28 TIA/EIA-232-F and ITU V.28 TIA/EIA-232-F and ITU V.28 TIA/EIA-232-F and ITU V.28 TIA/EIA-232-F and ITU V.28 TIA/EIA-232-F and ITU V.28

Principaux différenciateurs

  • Single-channel integration in a compact 16-pin TSSOP (vs MAX3221CPWRG4)
  • Integrated ±15 kV HBM protection on the RS-232 bus pins (vs MAX3221IPWG4)
  • Accepts 5 V logic input with a 3.3 V supply (vs MAX3221CPWE4)

Notes de conception

Place the four 0.1 µF charge-pump capacitors close to their corresponding pins and follow the manufacturer PCB layout exactly. Keep capacitor return paths short and symmetrical to minimize the charge-pump switching loop. The 16-pin TSSOP footprint should be routed to the same package drawing used for the selected MAX3221 ordering code, especially when using an alternative ordering suffix.

Do not treat the MAX3221IPWRG4 as a RS-485 transceiver; it provides one single-ended RS-232 driver and one receiver rather than a differential bus. Confirm the connector's TX, RX, ground, and optional handshake assignments, and verify that the host UART voltage levels are compatible. The device accepts 5 V logic input with a 3.3 V supply, but the connected system must still observe the appropriate logic thresholds.

Route the charge-pump capacitor connections away from sensitive input and reference traces. At the connector, provide a short ground path and consider external surge protection for long cables or severe industrial environments. The integrated ±15 kV HBM rating protects the serial bus pins under the specified human-body-model test, but it does not remove the need to assess lightning, switching, and industrial surge hazards.

Use the receiver-enable signal to control the receive path deliberately and avoid leaving a floating control input. Check that the selected MAX3221 suffix preserves the required enable and automatic-power-down behavior. Maintain the manufacturer-recommended spacing between the logic side and connector-side nets so switching activity from the charge pump is not coupled into nearby sensitive circuitry.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

TIA/EIA-232-F and ITU V.28 are interface-performance standards rather than material-compliance certifications. No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established for this exact ordering code.

Données vérifiées le : 2026-11-09 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

MAX3221IPWRG4 datasheet MAX3221IPWRG4 pinout MAX3221IPWRG4 datasheet pdf MAX3221IPWRG4 equivalent MAX3221IPWRG4 replacement MAX3221IPWRG4 cross reference MAX3221IPWRG4 vs MAX3221CPWRG4 MAX3221IPWRG4 TSSOP-16 pinout MAX3221IPWRG4 250kbps RS-232 MAX3221IPWRG4 3V to 5.5V Texas Instruments MAX3221IPWRG4 MAX3221IPWRG4 price MAX3221IPWRG4 stock MAX3221IPWRG4 industrial RS-232 What replaces MAX3221IPWRG4

Composants & termes associés

Texas Instruments MAX3221IPWRG4 MAX3221IPWG4 MAX3221CPWRG4 MAX3221CPWE4 MAX3221IPW MAX3221CPW RS-232 transceiver line driver line receiver interface IC semiconductor TIA/EIA-232-F ITU V.28 ESD protection human body model dual charge pump TSSOP-16 TSSOP package family surface-mount package 3.3 V logic 5 V logic RS-232 bus industrial controller test and measurement equipment
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ