MAX3221IPWRG4 - 250kbps RS-232 IC | Texas Instruments
MPN: MAX3221IPWRG4 ✓ 啟用中MAX3221IPWRG4 概覽
An RS-232 transceiver is an interface IC that converts logic-level signals between a host controller and a serial communications link. It belongs to the interface IC hierarchy and combines a line driver, line receiver, voltage conversion, and electrostatic-discharge protection. This integration allows a UART controller operating at 3.3 V or 5 V to communicate with equipment using the TIA/EIA-232-F electrical interface.
The MAX3221 supports a 3 V to 5.5 V supply, accepts 5 V logic input with a 3.3 V supply, and operates at data rates up to 250 kbps. Its dual charge-pump circuit supports the positive and negative RS-232 voltage levels using four external 0.1 µF capacitors. Low standby current of 1 µA is useful when the receiver or transmitter must remain powered while conserving system energy.
The ±15 kV human-body-model ESD rating applies to the RS-232 bus connections, including ground, and adds protection at the external interface where cables and connectors can expose the circuit to electrostatic discharge. The receiver includes a dedicated enable function, giving the host hardware control over when the received data path is active. The interface meets or exceeds TIA/EIA-232-F and ITU V.28 requirements.
Typical uses include single-port RS-232 links in industrial controllers, test equipment, point-of-sale systems, instrumentation, and service interfaces. The device is especially suitable where a compact design needs bidirectional signal translation, low standby consumption, and built-in bus-pin ESD protection without implementing a discrete charge-pump circuit.
Design with the four external charge-pump capacitors positioned close to their associated pins. Keep the RS-232 connector-side traces away from sensitive analog or high-speed digital paths, provide a reliable chassis or signal-ground connection, and evaluate additional protection when exposed cables exceed the device's ±15 kV HBM rating.
This page combines manufacturer specifications, package details, practical interface-design guidance, and same-footprint replacement options to support component selection, schematic review, PCB layout, and sourcing decisions for the MAX3221IPWRG4.
直接替換替代品,適用於 MAX3221IPWRG4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX3221IPWRG4 (相同外形與佔位) — 差異在於 ESD Protection, Package, Logic Input Compatibility, Maximum Data Rate, Number of Drivers.
MAX3221IPWG4
✅ 直接替換聯絡詢價
查看資料表 →MAX3221CPWRG4
✅ 直接替換聯絡詢價
查看資料表 →MAX3221CPWE4
✅ 直接替換聯絡詢價
查看資料表 →MAX3221IPW
✅ 直接替換聯絡詢價
查看資料表 →MAX3221CPW
✅ 直接替換聯絡詢價
查看資料表 →MAX3221IPWRG4 規格
| Device Type | Single-channel RS-232 line driver/receiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| Number of Drivers | 1 |
| Number of Receivers | 1 |
| Receiver Enable | Dedicated enable pin |
| ESD Protection | ±15 kV HBM |
| Standby Current | 1 µA typical |
| External Charge-Pump Capacitors | 4 × 0.1 µF |
| Logic Input Compatibility | Accepts 5 V logic input with 3.3 V supply |
| RS-232 Compliance | TIA/EIA-232-F |
| ITU Compliance | ITU V.28 |
| 封裝 | 16-pin TSSOP |
| 安裝類型 | Surface mount |
| ESD Test Method | Human body model (HBM) |
| Charge-Pump Architecture | Dual charge-pump circuit |
MAX3221IPWRG4 16-pin tssop 腳位配置指南
MAX3221IPWRG4(16-pin tssop 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX3221IPWRG4.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX3221IPWRG4 適用於 6 應用s: Industrial Controller Serial Port, Test and Measurement Equipment, Point-of-Sale Terminal, Embedded Service and Configuration Port, Instrumentation and Data Acquisition, Legacy Equipment Upgrade.
Industrial Controller Serial Port
The MAX3221IPWRG4 fits industrial controllers that require one RS-232 communications channel alongside a 3.3 V or 5 V host controller. Its 3 V to 5.5 V operating range and ability to accept 5 V logic input with a 3.3 V supply simplify mixed-voltage interfaces. The one-driver/one-receiver arrangement supports full-duplex serial links at up to 250 kbps, while the dedicated receiver enable lets firmware control the receive path. For exposed equipment connections, the ±15 kV HBM bus-pin protection adds resilience beyond ordinary unprotected logic interfaces.
推薦
Test and Measurement Equipment
The MAX3221IPWRG4 is appropriate for test instruments and service equipment that exchange RS-232 commands with a host PC or controller. A data rate of up to 250 kbps is sufficient for many configuration, logging, and legacy peripheral links, while the 3 V to 5.5 V supply range supports both older instrumentation and newer embedded control electronics. Its 1 µA typical standby current is useful during idle intervals, and the dedicated receiver enable supports orderly power-state management in multi-function test systems.
推薦
Point-of-Sale Terminal
The MAX3221IPWRG4 can connect a compact point-of-sale controller to a peripheral using a single RS-232 channel. The device's one-driver/one-receiver configuration is sufficient for a full-duplex point-to-point link, and its 250 kbps maximum rate accommodates common transaction, status, and peripheral-control traffic. Operation from 3 V to 5.5 V allows the interface to share either a 3.3 V or 5 V system rail. The ±15 kV HBM protection on the bus pins is particularly relevant when the cable port is accessible to users.
推薦
Embedded Service and Configuration Port
The MAX3221IPWRG4 is useful in embedded systems that retain an RS-232 configuration, diagnostic, or field-service connector. Its dual charge-pump circuit generates the positive and negative RS-232 signal levels required by the interface without a separate external power-supply circuit. The receiver enable provides a simple way for the host controller to isolate the receive function when it is not needed. With a 16-pin TSSOP package, the device supports compact designs while preserving compatibility with established TIA/EIA-232-F equipment.
推薦
Instrumentation and Data Acquisition
The MAX3221IPWRG4 can provide the electrical RS-232 interface for compact instrumentation, laboratory equipment, and data-acquisition controllers. A 250 kbps maximum rate supports many command and measurement-data protocols while minimizing board area through the 16-pin TSSOP package. The 3 V to 5.5 V range accommodates both legacy 5 V logic and 3.3 V systems, and the receiver enable can assist in controlled measurement sequences. The four required 0.1 µF capacitors should be positioned close to the charge-pump pins to maintain a compact, low-impedance switching loop.
推薦
Legacy Equipment Upgrade
The MAX3221IPWRG4 allows modern electronics to communicate with legacy RS-232 equipment without designing a discrete multi-level transceiver. The integrated charge pump handles voltage conversion, the driver and receiver handle logical-to-RS-232 signal translation, and the bus pins include ±15 kV HBM ESD protection. Operation at up to 250 kbps supports legacy peripherals, service consoles, and programming equipment. When replacing an older interface, verify connector signal assignments, ground continuity, cable length, and whether the connected equipment uses hardware handshaking.
推薦
推薦產品摘要
工程參考資料,適用於 MAX3221IPWRG4 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX3221IPWG4 | MAX3221CPWRG4 | MAX3221CPWE4 | MAX3221IPW | MAX3221CPW |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP |
| Device Type | Single-channel RS-232 line driver/receiver | MAX3221 single-channel RS-232 interface | Single transmitter/receiver RS-232 interface | MAX3221 single-channel RS-232 interface | MAX3221 single-channel RS-232 interface | MAX3221 single-channel RS-232 interface |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps | 250 kbps | 250 kbps | 250 kbps | 250 kbps |
| Number of Drivers | 1 | 1 | 1 | 1 | 1 | 1 |
| Number of Receivers | 1 | 1 | 1 | 1 | 1 | 1 |
| External Charge-Pump Capacitors | 4 × 0.1 µF | 4 × 0.1 µF | 4 × 0.1 µF | 4 × 0.1 µF | 4 × 0.1 µF | 4 × 0.1 µF |
| ESD Protection | ±15 kV HBM | ±15 kV HBM | ±15 kV HBM | ±15 kV HBM | ±15 kV HBM | ±15 kV HBM |
| RS-232 Compliance | TIA/EIA-232-F and ITU V.28 | TIA/EIA-232-F and ITU V.28 | TIA/EIA-232-F and ITU V.28 | TIA/EIA-232-F and ITU V.28 | TIA/EIA-232-F and ITU V.28 | TIA/EIA-232-F and ITU V.28 |
主要差異化特點
- Single-channel integration in a compact 16-pin TSSOP (對比MAX3221CPWRG4)
- Integrated ±15 kV HBM protection on the RS-232 bus pins (對比MAX3221IPWG4)
- Accepts 5 V logic input with a 3.3 V supply (對比MAX3221CPWE4)
設計說明
Place the four 0.1 µF charge-pump capacitors close to their corresponding pins and follow the manufacturer PCB layout exactly. Keep capacitor return paths short and symmetrical to minimize the charge-pump switching loop. The 16-pin TSSOP footprint should be routed to the same package drawing used for the selected MAX3221 ordering code, especially when using an alternative ordering suffix.
Do not treat the MAX3221IPWRG4 as a RS-485 transceiver; it provides one single-ended RS-232 driver and one receiver rather than a differential bus. Confirm the connector's TX, RX, ground, and optional handshake assignments, and verify that the host UART voltage levels are compatible. The device accepts 5 V logic input with a 3.3 V supply, but the connected system must still observe the appropriate logic thresholds.
Route the charge-pump capacitor connections away from sensitive input and reference traces. At the connector, provide a short ground path and consider external surge protection for long cables or severe industrial environments. The integrated ±15 kV HBM rating protects the serial bus pins under the specified human-body-model test, but it does not remove the need to assess lightning, switching, and industrial surge hazards.
Use the receiver-enable signal to control the receive path deliberately and avoid leaving a floating control input. Check that the selected MAX3221 suffix preserves the required enable and automatic-power-down behavior. Maintain the manufacturer-recommended spacing between the logic side and connector-side nets so switching activity from the charge pump is not coupled into nearby sensitive circuitry.
合規資訊
TIA/EIA-232-F and ITU V.28 are interface-performance standards rather than material-compliance certifications. No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established for this exact ordering code.