Maxim Integrated

MAX3243EEAI+G1Z - 250kbps RS-232 Transceiver | Maxim

Référence : MAX3243EEAI+G1Z ✓ Actif
3.0 V to 5.5 V Vdss 1 µA Id 28-pin SSOP Package
MOQ : 1 |

MAX3243EEAI+G1Z Présentation

The Maxim Integrated MAX3243EEAI+G1Z is a 3-transmitter, 5-receiver RS-232 interface transceiver operating from 3.0 V to 5.5 V, with a maximum data rate of 250 kbps in a 28-pin SSOP package. It provides automatic shutdown and wake-up, low 1 µA supply current, and enhanced electrostatic-discharge protection.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into digital logic levels. It belongs to the serial-interface hierarchy: transceiver > RS-232 interface > communications interface > interface IC. This bidirectional signal-conditioning function allows equipment operating at different logic levels to communicate through the EIA/TIA-232 physical interface.

The MAX3243EEAI+G1Z combines three driver outputs with five receiver inputs, supporting applications that need multiple receive channels and a smaller number of transmit channels. Its 3.0 V to 5.5 V supply range accommodates modern 3.3 V and 5 V digital systems. The 250 kbps maximum data rate is suitable for moderate-speed serial links, including embedded control, instrumentation, and industrial communications equipment.

Automatic shutdown is a defining feature of the MAX3243E family. When no valid receiver signal is detected, the on-board power supply and drivers can shut down to reduce supply current to as little as 1 µA. Automatic wake-up reactivates the interface when valid data returns, reducing system power consumption without requiring host intervention.

Enhanced ESD protection strengthens the interface against electrostatic discharge encountered during cable installation or industrial environments. According to the MAX3243EEAI data-sheet description, transmitter outputs and receiver inputs support ±15 kV air-gap discharge and ±8 kV contact-discharge protection. These ratings are relevant to external cable-facing pins and should be considered alongside normal board-layout and grounding practices.

Typical uses include RS-232 links in industrial controllers, test equipment, data-acquisition systems, point-of-sale hardware, and embedded serial-port systems. The 28-pin SSOP package is compact, but its lead pitch and thermal behavior require careful PCB planning. Use the manufacturer pin-description table when assigning tracks and confirming the exposed-package or thermal details for the selected ordering code.

This page combines the family-level electrical characteristics, exact package identification, sourcing guidance, application fit, and practical design considerations. It also identifies genuine same-family alternatives while making the differences between ordering variants explicit for engineering review.

Alternatives de remplacement direct pour MAX3243EEAI+G1Z — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec MAX3243EEAI+G1Z (même facteur de forme et même empreinte) — différant par Maximum Data Rate, Package, Product Type, Receiver Count, Supply Voltage Range.

Analog Devices
Maximum Data Rate: 250kbps
Package: 28-pin TSSOP
Product Type: RS-232 transceiver
Comparer avec MAX3243EEAI+G1Z →

MAX3243EAI+G1Z

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Analog Devices
📦 28-pin SSOP
RS-232 line driver and receiver transceiver IC · 3 V to 5.5 V · 250 kbps · 3 drivers · 5 receivers · ±15 kV HBM · 1 µA · AutoShutdown automatic shutdown and wake-up

Contactez-nous pour le prix

Voir la fiche technique →

MAX3243EAI+TG1Z

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Analog Devices
📦 28-pin SSOP
RS-232 transceiver interface IC · 3 channels · 5 channels · +3 V to +5.5 V · 1 A · EIA/TIA-232 · V.28 and V.24 · Automatic shutdown and wakeup

Contactez-nous pour le prix

Voir la fiche technique →

MAX3243EEAI+TG071

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 28-pin SSOP
Same MAX3243EEAI 3/5 transceiver and 250 kbps data rate; the TG071 grade differs by

📋 Alternative de référence (hors catalogue)

MAX3243EEUI+T

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Analog Devices
📦 28-pin SSOP
RS-232 transceiver · 3.0V to 5.5V · 250kbps · 3 drivers · 5 receivers · Full duplex · ±15kV · 1µA

Contactez-nous pour le prix

Voir la fiche technique →

MAX3237EAI+

✅ Remplacement direct
📦 28-pin SSOP
Shares the 28-pin SSOP, 3.0 V to 5.5 V, and 250 kbps class, but the receiver count differs by 2 channels, a 50% increase from 3 to 5 receivers

📋 Alternative de référence (hors catalogue)

MAX3243EEAI+G1Z Spécifications

Product Type 3/5 RS-232 transceiver
Transmitter Count 3
Receiver Count 5
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 250 kbps
AutoShutdown Supply Current 1 µA
Air-Gap ESD Protection ±15 kV
Contact-Discharge ESD Protection ±8 kV
Boîtier 28-pin SSOP
Type de montage Surface mount
Interface Standard EIA/TIA-232 and V.28/V.24

Guide de configuration des broches du MAX3243EEAI+G1Z 28-pin ssop

Configuration des broches du MAX3243EEAI+G1Z (boîtier 28-pin ssop). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 28-pin ssop pour le MAX3243EEAI+G1Z

Aucune donnée de brochage détaillée disponible pour MAX3243EEAI+G1Z.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MAX3243EEAI+G1Z convient pour 6 applications: Industrial Serial Controllers, Test and Measurement Equipment, Data-Acquisition Systems, Point-of-Sale and Retail Terminals, Embedded Serial Communication, Security and Access-Control Systems.

🏭

Industrial Serial Controllers

The MAX3243EEAI+G1Z suits industrial controllers that must expose several RS-232 receive channels while transmitting status or commands on fewer lines. Its three transmitters, five receivers, 250 kbps maximum rate, and 3.0 V to 5.5 V operating range support both 3.3 V and 5 V control electronics. Automatic shutdown reduces the 1 µA-level idle current when no valid receiver activity is detected. The 28-pin SSOP conserves board area, although cable routing should remain short and away from high-current switching nodes.

🔧

Test and Measurement Equipment

The MAX3243EEAI+G1Z can connect laboratory and field-test equipment to legacy RS-232 instruments that require multiple receive inputs. Its 250 kbps rate is appropriate for command and measurement-data transfers, while the five receivers can monitor several control or status lines from one interface. The low shutdown current benefits portable instruments that spend substantial time between test sequences. Place the transceiver near the connector, maintain a common signal ground, and route the cable-side traces away from sensitive analog and reference circuitry.

🖥️

Data-Acquisition Systems

The MAX3243EEAI+G1Z is appropriate for data-acquisition controllers communicating with external sensors, laboratory modules, or service equipment over RS-232. Five receiver channels support multiple status inputs, and the three drivers can carry commands or trigger signals. The 3.0 V to 5.5 V supply range permits operation from common embedded rails. The 250 kbps ceiling supports moderate-rate command and status traffic but should be checked against cable capacitance and timing margins. Automatic wake-up helps reduce standby demand when the acquisition system polls its instruments intermittently.

🔧

Point-of-Sale and Retail Terminals

Retail terminals can use the MAX3243EEAI+G1Z to interface a controller with RS-232 peripherals such as scales, printers, or magnetic-reader equipment. The combination of three transmitters and five receivers supports command output plus multiple peripheral-status inputs. Operation from 3.3 V or 5 V simplifies integration with embedded checkout hardware, and the AutoShutdown behavior limits consumption during inactive periods. Place surge and ESD protection strategy around the external connector, and verify that ground references meet the requirements of the connected peripherals.

📱

Embedded Serial Communication

The MAX3243EEAI+G1Z provides a compact bridge between an embedded processor and an RS-232 port in the 28-pin SSOP package. A 3.0 V to 5.5 V supply range allows direct operation from common embedded rails, while the 250 kbps rate covers many configuration, logging, and control protocols. Five receiver inputs can accept several status signals without requiring separate digital input buffers. Automatic shutdown and wake-up are especially useful in duty-cycled systems, although firmware must tolerate the receiver's signaling and transition behavior documented by the manufacturer.

🧩

Security and Access-Control Systems

The MAX3243EEAI+G1Z can support access-control readers, alarm panels, and configuration tools that exchange RS-232 commands and status signals. Three transmit channels can serve separate reader or panel ports, while five receive channels can monitor door, alarm, and acknowledgment signals. The enhanced ±15 kV air-gap and ±8 kV contact ESD ratings are useful at externally accessible cable interfaces, although enclosure and installation practices remain essential. The automatic low-power state can also reduce consumption in sparsely accessed or intermittently networked installations.

What is the MAX3243EEAI+G1Z?
The MAX3243EEAI+G1Z is a 3-transmitter, 5-receiver RS-232 transceiver from Maxim Integrated. According to the manufacturer product page, it operates from 3.0 V to 5.5 V, supports data rates up to 250 kbps, and includes automatic shutdown, automatic wake-up, and enhanced ESD protection. The device is supplied in a 28-pin SSOP package for compact surface-mount serial-interface designs.
What are the key specifications of MAX3243EEAI+G1Z?
The MAX3243EEAI+G1Z provides three RS-232 transmitters, five receivers, a 3.0 V to 5.5 V supply range, and a 250 kbps maximum data rate. Maxim Integrated specifies 1 µA shutdown current and enhanced ESD protection of ±15 kV air gap and ±8 kV contact discharge. These features make the 28-pin SSOP device suitable for low-power RS-232 equipment with multiple receive channels.
Where can I download the MAX3243EEAI+G1Z datasheet PDF?
The official MAX3243EEAI+G1Z documentation is available through the Analog Devices MAX3243E product page at https://www.analog.com/en/products/max3243e.html. The page contains the family datasheet and product information. Use the pin-description table and ordering information in that document when assigning the 28 package pins, confirming variant temperature grades, and checking the complete electrical characteristics.
Where is the MAX3243EEAI+G1Z pinout?
The MAX3243EEAI+G1Z pinout is documented in the MAX3243EEAI manufacturer data sheet, which is reachable from the official MAX3243E product page. The exact ordering code uses a 28-pin SSOP package. Read the package pinout and pin-description table directly because the +G1Z ordering suffix identifies the supplied configuration and should not be interpreted without the associated ordering information.
How much power does the MAX3243EEAI+G1Z use?
The MAX3243EEAI+G1Z can reduce its supply current to 1 µA through the MAX3243E family's AutoShutdown feature. According to the manufacturer product information, the transceiver shuts down when it does not detect a valid signal on its receiver inputs and automatically wakes when a valid signal returns. The 3.0 V to 5.5 V operating range supports both 3.3 V and 5 V system rails.
What data rate does the MAX3243EEAI+G1Z support?
The MAX3243EEAI+G1Z supports serial communication at up to 250 kbps, as stated by Maxim Integrated. This rate is suitable for moderate-speed RS-232 links rather than high-speed differential buses. Cable length, capacitance, grounding, and signal-integrity margin still apply, so the interface rating should be treated as the IC limit rather than a guarantee for every cable and baud-rate combination.
What ESD protection does the MAX3243EEAI+G1Z provide?
The MAX3243EEAI+G1Z provides enhanced ESD protection on its transmitter outputs and receiver inputs. The MAX3243EEAI data-sheet description specifies protection to ±15 kV using an air-gap discharge and ±8 kV using contact discharge. These interface-protection figures complement, but do not replace, proper enclosure grounding, cable management, and ESD-control practices around the assembled equipment.
Where can I buy MAX3243EEAI+G1Z online?
Use the Request a Quote form on this XAIPART page to request current availability, price, and lead time for the MAX3243EEAI+G1Z. Quote requests allow the exact 28-pin SSOP ordering code and required quantity to be confirmed before an order is placed, reducing the risk of ordering a closely related but nonidentical suffix.
What is the price of MAX3243EEAI+G1Z?
Current pricing for the MAX3243EEAI+G1Z is best requested through the Request a Quote form on this page. Enter the exact MPN, required quantity, and shipment destination so the commercial offer reflects the correct 28-pin SSOP configuration. Price and inventory can change, making a live quote more reliable than a static listing figure.
What is the lead time and stock status of MAX3243EEAI+G1Z?
Request the current lead time, stock position, and minimum order quantity for the MAX3243EEAI+G1Z through the Request a Quote form on this page. Include your production forecast and reel or tray requirements. The manufacturer product page identifies the MAX3243E family, while current order availability for the exact +G1Z configuration should be confirmed for each purchase.
MAX3243EEAI+G1Z vs MAX3237EAI+ - which is better?
The MAX3243EEAI+G1Z and MAX3237EAI+ are related Maxim Integrated RS-232 interface devices, but they do not have the same transmitter and receiver configuration. The MAX3243EEAI+G1Z is identified as a 3/5 transceiver, while MAX3237EAI+ is a different family member. Confirm receiver count, pinout, electrical limits, and package before selecting either device; use the manufacturer comparison information for an exact design decision.
What is the difference between MAX3243EEAI+G1Z and MAX3243EAI+G1Z?
The MAX3243EEAI+G1Z is the enhanced-E, industrial ordering variant associated with the MAX3243EEAI family, while MAX3243EAI+G1Z appears as a related MAX3243E ordering option. The defining electrical distinction is the device suffix, while the exact temperature grade and qualification status must be checked in the ordering table. Both entries are identified with a 28-pin SSOP package in distributor records.
When should I choose MAX3243EEAI+G1Z over a MAX3243E variant?
Choose the MAX3243EEAI+G1Z when the design calls for a Maxim Integrated MAX3243EEAI 3/5 RS-232 transceiver in the 28-pin SSOP configuration and requires its specified operating and environmental grade. When selecting another MAX3243E variant, compare the exact ordering suffix, temperature range, operating lifetime, and qualification markings. Use the manufacturer ordering table as the controlling source for those distinctions.
Can MAX3243EEAI+G1Z replace MAX3243EAI+G1Z?
The MAX3243EEAI+G1Z can be considered as a candidate for a MAX3243EAI+G1Z position only after its ordering suffix, package, pinout, and temperature grade have been verified against the manufacturer documentation. Both listings identify a 28-pin SSOP RS-232 transceiver, but matching package and function alone does not establish approval of a particular grade. Review the ordering information before committing the substitution to production.
What can replace the MAX3243EEAI+G1Z?
The closest documented drop-in candidates are other 28-pin SSOP MAX3243E-family ordering variants, subject to verification of pin assignments and environmental grade. The listed alternatives include MAX3243EAI+G1Z, MAX3243EAI+TG1Z, MAX3243EEAI+TG071, and MAX3243EEUI+T. No cross-brand replacement is asserted because the cross-reference results do not establish pin-for-pin electrical equivalence.
Is MAX3243EEAI+G1Z suitable for industrial equipment?
The MAX3243EEAI+G1Z is an RS-232 interface intended for embedded and industrial communications equipment requiring three transmit channels, five receive channels, and low-power shutdown. The MAX3243EEAI ordering family supports extended-temperature use, but the exact temperature range must be checked in the manufacturer ordering table. Its ±15 kV air-gap ESD rating adds useful protection for cable-connected external interfaces.

Données de référence d'ingénierie pour MAX3243EEAI+G1Z — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Select the MAX3243EEAI+G1Z when an embedded or industrial design needs a Maxim Integrated 3/5 RS-232 transceiver in a 28-pin SSOP package, a 3.0 V to 5.5 V supply, and a maximum data rate of 250 kbps. Its automatic shutdown and wake-up behavior is particularly useful in portable or intermittently active equipment. The MAX3237EAI+ may fit only when three receivers are sufficient because the MAX3243EEAI+G1Z provides two additional receiver inputs. For the remaining MAX3243E-family candidates, choose according to the exact ordering suffix and the required operating-temperature or qualification grade rather than electrical headline specifications, which remain closely matched. Before releasing a substitution, verify the pin assignments, supply limits, receiver thresholds, shutdown behavior, package dimensions, and lifecycle status in the manufacturer ordering information. For commercial quantities, use the Request a Quote form on this page and identify the exact MPN, reel quantity, and production forecast.

Comparaison avec les alternatives

Paramètre Ce produit MAX3243EAI+G1Z MAX3243EAI+TG1Z MAX3243EEAI+TG071 MAX3243EEUI+T MAX3237EAI+
Brand Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated
Package 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP
Transmitter Count 3 3 3 3 3 3
Receiver Count 5 5 5 5 5 3
Maximum Data Rate 250 kbps 250 kbps 250 kbps 250 kbps 250 kbps 250 kbps
Exact Ordering Grade EEAI+G1Z EAI+G1Z EAI+TG1Z EEAI+TG071 EEUI+T EAI+

Principaux différenciateurs

  • Five receivers provide greater input-channel capacity (vs MAX3237EAI+)
  • Exact ordering configuration for MAX3243EEAI-family designs (vs MAX3243EAI+G1Z)
  • Low-power automatic shutdown supports duty-cycled interfaces (vs MAX3237EAI+)

Notes de conception

Do not infer that every MAX3243E-family suffix is electrically interchangeable. The MAX3243EEAI+G1Z is a specific ordering variant in a 28-pin SSOP family, while related E, EE, UI, and TG codes can identify different temperature grades, qualification levels, or packaging options. Before substitution, compare the complete ordering table, operating-temperature limits, exposed-terminal details, and lifecycle status against the original design requirements.

Place the MAX3243EEAI+G1Z close to the RS-232 connector and route driver outputs and receiver inputs as short, impedance-controlled traces where practical. Keep the transceiver and its charge-pump or support components away from sensitive analog inputs. Route the connector ground directly to the interface ground reference, and avoid sharing narrow ground paths with motors, relays, or switching-power stages that could disturb the receiver threshold.

The enhanced ±15 kV air-gap and ±8 kV contact-discharge ratings protect the interface pins under specified ESD test conditions, but they do not eliminate radiated or conducted emissions from attached equipment. Use the recommended bypass capacitance and support-component layout from the manufacturer data sheet. Keep external cables away from switching nodes and use chassis grounding or shield termination according to the final enclosure and connector design.

Validate the 1 µA shutdown figure in the intended system because it describes the AutoShutdown state rather than active communication power. During normal data transfer, calculate dissipation from the selected 3.3 V or 5 V supply, loaded driver levels, and enabled receiver count. Confirm that the supply remains within 3.0 V to 5.5 V over tolerance and that startup or wake-up timing meets the host communication protocol.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The exact MAX3243EEAI ordering code and environmental compliance declarations should be confirmed against the current manufacturer product documentation and declaration of compliance.

Données vérifiées le : 2026-11-09 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

MAX3243EEAI+G1Z datasheet MAX3243EEAI+G1Z datasheet pdf MAX3243EEAI+G1Z pinout MAX3243EEAI+G1Z 28-SSOP MAX3243EEAI+G1Z equivalent MAX3243EEAI+G1Z replacement MAX3243EEAI+G1Z cross reference MAX3243EEAI+G1Z vs MAX3237EAI+ MAX3243EEAI+G1Z 250kbps Maxim Integrated MAX3243EEAI+G1Z MAX3243EEAI+G1Z price MAX3243EEAI+G1Z stock MAX3243EEAI+G1Z industrial interface MAX3243EEAI+G1Z AutoShutdown

Composants & termes associés

Maxim Integrated MAX3243EEAI+G1Z MAX3243EAI+G1Z MAX3243EAI+TG1Z MAX3243EEAI+TG071 MAX3243EEUI+T MAX3237EAI+ RS-232 transceiver EIA/TIA-232 V.28 V.24 interface IC serial interface AutoShutdown automatic wake-up ESD protection ±15 kV air-gap discharge ±8 kV contact discharge 28-pin SSOP surface mount 250 kbps 3.0 V to 5.5 V 1 µA shutdown current industrial communications
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ