MAX3243EIDWR - 3/5 RS-232 Transceiver, 500kbps | Texas Instruments
Référence : MAX3243EIDWR ✓ ActifMAX3243EIDWR Présentation
An RS-232 transceiver is the interface class that converts between digital logic levels and the differential voltage levels used by RS-232 serial links. The MAX3243EIDWR combines transmit and receive functions in one package, allowing a compact asynchronous serial-port interface. Its integrated dual charge pump generates the positive and negative voltage levels required by RS-232 drivers without requiring external negative-supply components.
The principal protection feature is ±15 kV IEC ESD protection on the serial-port connection pins. The manufacturer specifies protection for HBM and IEC 61000-4-2 air-gap discharge, with ±8 kV contact-discharge protection. This makes the interface suitable for equipment exposed to electrostatic discharge at connector entry points. The device is designed to meet TIA/EIA-232-F requirements.
The MAX3243EIDWR is appropriate for industrial control equipment, data acquisition systems, service interfaces, and embedded serial-port designs. Its 500 kbps capability supports communication with legacy peripherals and higher-speed control equipment while the 3 V to 5.5 V supply range allows use in both 3.3 V and 5 V systems. The three drivers and five receivers provide flexibility for multi-channel serial links.
Designers should follow the manufacturer pin-description table and typical application circuit when assigning connector signals. Place charge-pump capacitors and supply bypass capacitors close to their specified pins, keep the protected serial traces away from sensitive analog circuitry, and provide adequate ESD-return paths through the connector and chassis. The 28-pin SOIC footprint allows straightforward use in conventional surface-mount PCB layouts.
This page consolidates the manufacturer specifications, package information, interface guidance, and practical replacement considerations for engineers evaluating the MAX3243EIDWR in a 3 V to 5.5 V RS-232 design.
Alternatives de remplacement direct pour MAX3243EIDWR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MAX3243EIDWR (même facteur de forme et même empreinte) — différant par Package, ESD Protection, Maximum Data Rate, Product Type, Interface Standard.
MAX3243EIDW
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →MAX3243EIDB
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →MAX3243EIPWR
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →MAX3243EIDWR Spécifications
| Product Type | 3/5 RS-232 transceiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 500 kbps |
| Number of Line Drivers | 3 |
| Number of Line Receivers | 5 |
| Serial-Pin ESD Protection | ±15 kV HBM and IEC 61000-4-2 air-gap discharge |
| Serial-Pin Contact-Discharge Protection | ±8 kV IEC 61000-4-2 contact discharge |
| Plage de température de fonctionnement | -40 °C to +85 °C |
| Boîtier | 28-pin SOIC (DW) |
| Type de montage | Surface mount |
| Charge-Pump Circuit | Dual charge-pump circuit |
| Interface Standard | TIA/EIA-232-F |
| Communication Direction | Asynchronous serial communication |
Guide de configuration des broches du MAX3243EIDWR 28-pin soic (dw)
Configuration des broches du MAX3243EIDWR (boîtier 28-pin soic (dw)). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour MAX3243EIDWR.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MAX3243EIDWR convient pour 6 applications: Industrial Serial Control Interface, Data Acquisition System, Embedded Service Port, RS-232 Test and Measurement Equipment, Point-of-Sale and Peripheral Connectivity, Networked Equipment Management Port.
Industrial Serial Control Interface
The MAX3243EIDWR fits industrial control equipment that needs several RS-232 links on a single board. Its three line drivers and five line receivers provide dedicated channels for command output, status reporting, and service communication, while the 3 V to 5.5 V supply range supports both 3.3 V and 5 V controller rails. The 500 kbps maximum data rate is suitable for asynchronous equipment links that need more margin than conventional low-speed serial ports. Use the manufacturer pin-description table to assign driver and receiver channels, and place charge-pump and bypass capacitors close to their pins to limit supply disturbance and preserve signal timing.
Recommandé
Data Acquisition System
The MAX3243EIDWR is appropriate for data-acquisition equipment that connects sensors, instruments, or service computers through RS-232. Five receivers allow multiple incoming measurement or status signals, while three drivers support outbound commands and acknowledgments. Its 500 kbps capability can accommodate asynchronous telemetry bursts when the receiving device and cable characteristics are appropriate. The specified -40 °C to +85 °C range supports industrial environments, and the connector-side ±15 kV ESD protection helps reduce risk from cable-borne static discharge. Maintain short ground-return paths and verify connector grounding for effective EMI and ESD performance.
Recommandé
Embedded Service Port
The MAX3243EIDWR can implement a multi-purpose embedded service port for configuration, diagnostics, and firmware update connections. Its single-supply operation from 3 V to 5.5 V simplifies integration with modern control systems, and its integrated charge pump avoids a separate negative-supply rail for RS-232 transmission. Three transmit channels can support command, reset, or status lines, while five receive channels can accept multiple service responses. The 28-pin SOIC (DW) package supports conventional surface-mount assembly, but the exact pin assignments and external capacitor layout must follow the manufacturer datasheet and reference circuit.
Recommandé
RS-232 Test and Measurement Equipment
The MAX3243EIDWR is useful in test and measurement instruments that must communicate with legacy RS-232 equipment through several command and response paths. The 500 kbps maximum rate supports instrument control traffic, while the three-driver and five-receiver arrangement simplifies channel allocation for remote commands, status, and trigger signals. The 3 V to 5.5 V supply operation allows the interface to sit beside either 3.3 V or 5 V digital logic. For bench and field-connected equipment, route protected serial traces away from sensitive inputs and implement the connector-side grounding and bypass layout specified by the manufacturer.
Recommandé
Point-of-Sale and Peripheral Connectivity
The MAX3243EIDWR can support legacy peripheral connectivity in systems where a controller needs several RS-232 channels for a printer, display, reader, or service adapter. The three drivers can handle outbound peripheral commands, while five receivers can collect acknowledgments and status signals from multiple devices. The 500 kbps rate is appropriate for asynchronous transaction traffic, and the integrated ESD protection is especially relevant where peripherals connect through external cables. Because legacy equipment systems can vary in grounding and signal levels, confirm the RS-232 electrical requirements and test the complete cable and connector arrangement before deployment.
Recommandé
Networked Equipment Management Port
The MAX3243EIDWR can provide an isolated management path for networked equipment that still requires RS-232 service access alongside Ethernet or another communications interface. It supports 3.3 V or 5 V system operation, three transmit channels, and five receive channels, providing flexibility for console, configuration, and diagnostic traffic. The device’s specified -40 °C to +85 °C operating range is useful in industrial network equipment, while its connector-side ESD protection addresses a common external-interface stress. Keep the interface circuitry physically separated from high-speed network sections and route protective return currents directly toward the system grounding strategy.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MAX3243EIDWR — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MAX3243EIDW | MAX3243EIDB | MAX3243EIPWR |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-pin SOIC (DW) | 28-pin SOIC (DW) | 28-pin SOIC (DW) | 28-pin SOIC (DW) family |
| Transceiver Configuration | 3/5 | 3/5 | 3/5 | 3/5 |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 500 kbps | 500 kbps | 500 kbps | 500 kbps |
| Line Drivers | 3 | 3 | 3 | 3 |
| Line Receivers | 5 | 5 | 5 | 5 |
Principaux différenciateurs
- Provides a balanced three-driver and five-receiver RS-232 interface in one package (vs MAX3232EIDR)
- Supports 500 kbps operation from a 3 V to 5.5 V supply (vs MAX232EIPWR)
- Adds connector-side ESD protection (vs MAX3243EIDW)
Notes de conception
Follow the Texas Instruments MAX3243E typical-application layout for the charge-pump capacitors and supply bypass capacitor. Place each capacitor close to the associated IC pin, use the shortest possible supply and ground returns, and avoid routing the RS-232 connector traces beneath sensitive analog or high-speed digital sections. The charge-pump nodes should remain compact and away from external connector wiring.
RS-232 connector pins are exposed to external cables and should be treated as protected interface signals. Maintain a low-impedance chassis or signal-ground path where the product architecture permits, keep the protected serial interface separated from sensitive circuitry, and use the manufacturer pin-description table to identify all connector-facing pins. Verify the final grounding arrangement with the complete enclosure and cable installation.
Do not substitute a related MAX3243 family ordering code solely because the transceiver counts match. Confirm the 28-pin SOIC (DW) footprint, pin assignments, temperature grade, ordering suffix, and external capacitor requirements against the manufacturer part-selection information. Also verify the interface voltage levels and logic polarity of the connected system, since those settings are not interchangeable merely because the package is similar.
Informations de conformité
The manufacturer product information identifies ±15 kV IEC ESD protection and TIA/EIA-232-F compliance. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer compliance documentation.