Texas Instruments

MAX3243EIDWR - 3/5 RS-232 Transceiver, 500kbps | Texas Instruments

MPN: MAX3243EIDWR ✓ Hoạt động
3 V to 5.5 V Vdss 28-pin SOIC (DW) Package
MOQ: 1 |

MAX3243EIDWR Tóm tắt

The Texas Instruments MAX3243EIDWR is a 3/5-channel RS-232 transceiver with three line drivers, five line receivers, and integrated charge-pump circuitry. It operates from a 3 V to 5.5 V supply, supports data rates up to 500 kbps, and is specified for industrial temperatures from -40 °C to +85 °C. The device is packaged in a 28-pin SOIC (DW) package.

An RS-232 transceiver is the interface class that converts between digital logic levels and the differential voltage levels used by RS-232 serial links. The MAX3243EIDWR combines transmit and receive functions in one package, allowing a compact asynchronous serial-port interface. Its integrated dual charge pump generates the positive and negative voltage levels required by RS-232 drivers without requiring external negative-supply components.

The principal protection feature is ±15 kV IEC ESD protection on the serial-port connection pins. The manufacturer specifies protection for HBM and IEC 61000-4-2 air-gap discharge, with ±8 kV contact-discharge protection. This makes the interface suitable for equipment exposed to electrostatic discharge at connector entry points. The device is designed to meet TIA/EIA-232-F requirements.

The MAX3243EIDWR is appropriate for industrial control equipment, data acquisition systems, service interfaces, and embedded serial-port designs. Its 500 kbps capability supports communication with legacy peripherals and higher-speed control equipment while the 3 V to 5.5 V supply range allows use in both 3.3 V and 5 V systems. The three drivers and five receivers provide flexibility for multi-channel serial links.

Designers should follow the manufacturer pin-description table and typical application circuit when assigning connector signals. Place charge-pump capacitors and supply bypass capacitors close to their specified pins, keep the protected serial traces away from sensitive analog circuitry, and provide adequate ESD-return paths through the connector and chassis. The 28-pin SOIC footprint allows straightforward use in conventional surface-mount PCB layouts.

This page consolidates the manufacturer specifications, package information, interface guidance, and practical replacement considerations for engineers evaluating the MAX3243EIDWR in a 3 V to 5.5 V RS-232 design.

Bộ thay thế dễ dàng lắp đặt cho MAX3243EIDWR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX3243EIDWR (cùng hình factor và footprint) — khác nhau ở Package, ESD Protection, Maximum Data Rate, Product Type, Interface Standard.

Texas Instruments
Package: 28-pin SOIC
ESD Protection: ±15 kV HBM
Maximum Data Rate: 250 kbps
So sánh với MAX3243EIDWR →
Texas Instruments
Package: 28-pin SSOP
ESD Protection: ±15kV IEC
Maximum Data Rate: 500kbps
So sánh với MAX3243EIDWR →
Texas Instruments
Package: 28-pin SOIC (DW), gull wing, surface mount
ESD Protection: +/-15 kV (HBM) on serial pins
Maximum Data Rate: 250 kbps
So sánh với MAX3243EIDWR →
Texas Instruments
ESD Protection: ±15 kV HBM
So sánh với MAX3243EIDWR →

MAX3243EIDW

✅ Drop-In
Texas Instruments
📦 28-pin SOIC (DW)
RS-232 line driver/receiver transceiver · 3/5 multichannel transceiver · 3 V to 5.5 V · 500 kbps · ±15 kV · ±8 kV · 5 · Full duplex

Liên hệ để biết giá

Xem tài liệu →

MAX3243EIDB

✅ Drop-In
Texas Instruments
📦 28-pin SOIC (DW)
3 V to 5.5 V · 500kbps · 3 · 5 · ±15kV IEC · RS-232 · 28-pin SSOP · DB

Liên hệ để biết giá

Xem tài liệu →

MAX3243EIPWR

✅ Drop-In
Texas Instruments
📦 28-pin SOIC (DW)
Multichannel RS-232 line driver/receiver · 3 V to 5.5 V · 500 kbps · 3 channels · 5 channels · 3.3 V · plus or minus 15 kV IEC ESD protection · -40°C to +85°C

Liên hệ để biết giá

Xem tài liệu →

MAX3243EIDWR Thông số kỹ thuật

Product Type 3/5 RS-232 transceiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 500 kbps
Number of Line Drivers 3
Number of Line Receivers 5
Serial-Pin ESD Protection ±15 kV HBM and IEC 61000-4-2 air-gap discharge
Serial-Pin Contact-Discharge Protection ±8 kV IEC 61000-4-2 contact discharge
Khoảng nhiệt độ hoạt động -40 °C to +85 °C
Hộp 28-pin SOIC (DW)
Kiểu lắp đặt Surface mount
Charge-Pump Circuit Dual charge-pump circuit
Interface Standard TIA/EIA-232-F
Communication Direction Asynchronous serial communication

Hướng dẫn cấu hình chân MAX3243EIDWR 28-pin soic (dw)

Cấu hình chân cho MAX3243EIDWR (28-pin soic (dw) gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 28-pin soic (dw) cho MAX3243EIDWR

Không có dữ liệu chân cụ thể sẵn có cho MAX3243EIDWR.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MAX3243EIDWR phù hợp cho 6 Áp dụngs: Industrial Serial Control Interface, Data Acquisition System, Embedded Service Port, RS-232 Test and Measurement Equipment, Point-of-Sale and Peripheral Connectivity, Networked Equipment Management Port.

🏭

Industrial Serial Control Interface

The MAX3243EIDWR fits industrial control equipment that needs several RS-232 links on a single board. Its three line drivers and five line receivers provide dedicated channels for command output, status reporting, and service communication, while the 3 V to 5.5 V supply range supports both 3.3 V and 5 V controller rails. The 500 kbps maximum data rate is suitable for asynchronous equipment links that need more margin than conventional low-speed serial ports. Use the manufacturer pin-description table to assign driver and receiver channels, and place charge-pump and bypass capacitors close to their pins to limit supply disturbance and preserve signal timing.

📊

Data Acquisition System

The MAX3243EIDWR is appropriate for data-acquisition equipment that connects sensors, instruments, or service computers through RS-232. Five receivers allow multiple incoming measurement or status signals, while three drivers support outbound commands and acknowledgments. Its 500 kbps capability can accommodate asynchronous telemetry bursts when the receiving device and cable characteristics are appropriate. The specified -40 °C to +85 °C range supports industrial environments, and the connector-side ±15 kV ESD protection helps reduce risk from cable-borne static discharge. Maintain short ground-return paths and verify connector grounding for effective EMI and ESD performance.

🔧

Embedded Service Port

The MAX3243EIDWR can implement a multi-purpose embedded service port for configuration, diagnostics, and firmware update connections. Its single-supply operation from 3 V to 5.5 V simplifies integration with modern control systems, and its integrated charge pump avoids a separate negative-supply rail for RS-232 transmission. Three transmit channels can support command, reset, or status lines, while five receive channels can accept multiple service responses. The 28-pin SOIC (DW) package supports conventional surface-mount assembly, but the exact pin assignments and external capacitor layout must follow the manufacturer datasheet and reference circuit.

🖥️

RS-232 Test and Measurement Equipment

The MAX3243EIDWR is useful in test and measurement instruments that must communicate with legacy RS-232 equipment through several command and response paths. The 500 kbps maximum rate supports instrument control traffic, while the three-driver and five-receiver arrangement simplifies channel allocation for remote commands, status, and trigger signals. The 3 V to 5.5 V supply operation allows the interface to sit beside either 3.3 V or 5 V digital logic. For bench and field-connected equipment, route protected serial traces away from sensitive inputs and implement the connector-side grounding and bypass layout specified by the manufacturer.

🖨️

Point-of-Sale and Peripheral Connectivity

The MAX3243EIDWR can support legacy peripheral connectivity in systems where a controller needs several RS-232 channels for a printer, display, reader, or service adapter. The three drivers can handle outbound peripheral commands, while five receivers can collect acknowledgments and status signals from multiple devices. The 500 kbps rate is appropriate for asynchronous transaction traffic, and the integrated ESD protection is especially relevant where peripherals connect through external cables. Because legacy equipment systems can vary in grounding and signal levels, confirm the RS-232 electrical requirements and test the complete cable and connector arrangement before deployment.

🌐

Networked Equipment Management Port

The MAX3243EIDWR can provide an isolated management path for networked equipment that still requires RS-232 service access alongside Ethernet or another communications interface. It supports 3.3 V or 5 V system operation, three transmit channels, and five receive channels, providing flexibility for console, configuration, and diagnostic traffic. The device’s specified -40 °C to +85 °C operating range is useful in industrial network equipment, while its connector-side ESD protection addresses a common external-interface stress. Keep the interface circuitry physically separated from high-speed network sections and route protective return currents directly toward the system grounding strategy.

What is the operating voltage of MAX3243EIDWR?
The MAX3243EIDWR operates from a 3 V to 5.5 V supply, according to the Texas Instruments MAX3243E product information. This range supports both 3.3 V and 5 V system rails. The device contains three RS-232 line drivers, five line receivers, and an integrated dual charge pump for generating the positive and negative RS-232 voltage levels.
What is the maximum data rate of MAX3243EIDWR?
The MAX3243EIDWR supports RS-232 data rates up to 500 kbps, according to the Texas Instruments MAX3243E product page. This makes it suitable for asynchronous serial links in industrial equipment, embedded controllers, data-acquisition systems, and service interfaces. The complete operating details and timing information are found in the manufacturer datasheet.
How many RS-232 drivers and receivers does MAX3243EIDWR have?
The MAX3243EIDWR has three line drivers and five line receivers. The manufacturer describes the device as a 3/5 multichannel RS-232 line driver/receiver. The three-driver, five-receiver arrangement supports multi-channel serial designs and allows a single interface IC to serve several unidirectional or bidirectional communication links.
What ESD protection does MAX3243EIDWR provide?
The MAX3243EIDWR provides ±15 kV IEC ESD protection on serial-port connection pins, including HBM and IEC 61000-4-2 air-gap discharge protection. According to the Texas Instruments MAX3243E datasheet, contact-discharge protection is ±8 kV. The protection is intended for connector-facing RS-232 pins rather than for every supply or logic pin.
Where can I download the MAX3243EIDWR datasheet?
The official MAX3243E datasheet is available through the Texas Instruments product link at https://www.ti.com/lit/gpn/MAX3243E. The MAX3243EIDWR is listed as a 28-pin SOIC (DW) orderable variant. Use the pin-description table, electrical characteristics, and typical application circuit in that manufacturer document when designing the PCB or replacing the device.
Where can I find the MAX3243EIDWR pinout?
The MAX3243EIDWR pinout is defined in the Texas Instruments MAX3243E datasheet and product-page package information. The device is a 28-pin SOIC in the DW package. Assign pins using the manufacturer pin-description table rather than relying on a generic RS-232 pinout, because driver, receiver, charge-pump, and supply assignments are specific to the MAX3243E family.
What is the best drop-in replacement for MAX3243EIDWR?
MAX3243EIDW is the closest same-family drop-in candidate identified for the MAX3243EIDWR because it uses the same 28-pin SOIC footprint and is described as having consistent terminals, packages, and principal performance characteristics. MAX3243EIDB and MAX3243EIPWR are also family-related candidates, but the manufacturer ordering table should be checked for exact package and ordering-code compatibility before substitution.
Can MAX3243EIDW replace MAX3243EIDWR?
MAX3243EIDW is described as a replacement candidate for MAX3243EIDWR with consistent performance characteristics, terminals, and packages. The two devices are therefore the most practical same-brand comparison in the family cross-reference data. Confirm the exact ordering suffix, temperature range, and production availability against the Texas Instruments part-selection table before releasing a replacement into production.
When should I choose MAX3243EIDWR over MAX3243EIPWR?
Choose MAX3243EIDWR when the design requires the 28-pin SOIC (DW) package and the exact MAX3243EIDWR ordering code has been validated for the system. MAX3243EIPWR is a related MAX3243E-family device whose package ordering code differs, so it should be selected only after the PCB footprint and pin compatibility have been confirmed. The key selection criteria are package, temperature grade, and ordering code rather than the transceiver function alone.
Is MAX3243EIDWR suitable for industrial equipment?
Yes, MAX3243EIDWR is suitable for many industrial applications because it is specified for -40 °C to +85 °C operation and includes ±15 kV ESD protection on serial-port pins. The manufacturer describes the device as a 3 V to 5.5 V, 500 kbps RS-232 interface with TIA/EIA-232-F compliance. Final suitability still depends on the enclosure, connector grounding, and system EMC requirements.
How much power supply bypassing does MAX3243EIDWR need?
The MAX3243EIDWR requires the external capacitors shown in the manufacturer typical-application circuit, including the charge-pump capacitors and supply bypass capacitor. Place those components close to the associated pins and keep the return paths short. The exact capacitor values, voltage ratings, and layout details must be taken from the Texas Instruments datasheet rather than inferred from a generic RS-232 design.
Does MAX3243EIDWR include an RS-232 charge pump?
Yes, the MAX3243EIDWR includes a dual charge-pump circuit. The charge pump provides the positive and negative voltage levels needed by the RS-232 line drivers while allowing operation from a single 3 V to 5.5 V supply. External charge-pump capacitors are still required as specified by the manufacturer, so the complete circuit includes both the internal charge-pump function and its recommended external components.
What are the key specifications of MAX3243EIDWR?
The key MAX3243EIDWR specifications are a 3 V to 5.5 V operating supply, 500 kbps maximum data rate, three line drivers, five line receivers, ±15 kV serial-pin ESD protection, and a -40 °C to +85 °C operating-temperature range. The package is 28-pin SOIC (DW). According to Texas Instruments, the device also includes a dual charge pump and meets TIA/EIA-232-F requirements.
Where to buy MAX3243EIDWR online?
Use the Request a Quote form on this page to request MAX3243EIDWR availability, lead time, and commercial terms. The manufacturer lists the part as a 28-pin SOIC (DW) orderable variant, and the product is identified as active in the available manufacturer information. The quote form is the appropriate route for current supply and sourcing confirmation.
What is the lead time for MAX3243EIDWR?
The current lead time and minimum order quantity for MAX3243EIDWR should be confirmed through the Request a Quote form on this page. The available manufacturer information identifies the part and its 28-pin SOIC (DW) package but does not provide a fixed production lead-time figure. For a new design, use the quote response to coordinate procurement with the production schedule.
Is MAX3243EIDWR in stock?
Stock status can change quickly and should be checked through the Request a Quote form on this page. The product is identified as an active Texas Instruments variant with a 28-pin SOIC (DW) package. Submit the exact MPN MAX3243EIDWR when requesting current inventory, lead time, and delivery information for your production quantity.
What is the difference between MAX3243EIDWR and MAX3243EIDB?
MAX3243EIDWR and MAX3243EIDB are related MAX3243E-family RS-232 transceivers, and the cross-reference data identifies them as close alternatives. Both are associated with the same 28-pin SOIC package family, but the ordering suffixes indicate different orderable configurations. Verify the exact lead finish, temperature rating, and package dimensions in the Texas Instruments ordering information before treating them as interchangeable.

Dữ liệu tham khảo kỹ thuật cho MAX3243EIDWR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose MAX3243EIDWR when the PCB uses the 28-pin SOIC (DW) footprint and the design needs three RS-232 drivers, five receivers, 3 V to 5.5 V operation, and up to 500 kbps communication. MAX3243EIDW is the closest same-family candidate when its exact ordering code, temperature grade, and lifecycle status are acceptable. MAX3243EIDB and MAX3243EIPWR are useful same-brand alternatives for BOM review, but their suffix and mechanical ordering details must be checked before production substitution. Use a MAX232 or MAX3232 device instead when only one driver and one receiver are required, because those simpler interfaces reduce cost and board area. No cross-brand drop-in alternative was established from the available cross-reference results, so engineers should not assume that a competitor part is footprint-compatible without independent verification.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MAX3243EIDW MAX3243EIDB MAX3243EIPWR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 28-pin SOIC (DW) 28-pin SOIC (DW) 28-pin SOIC (DW) 28-pin SOIC (DW) family
Transceiver Configuration 3/5 3/5 3/5 3/5
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 500 kbps 500 kbps 500 kbps 500 kbps
Line Drivers 3 3 3 3
Line Receivers 5 5 5 5

Bảo phân biệt quan trọng

  • Provides a balanced three-driver and five-receiver RS-232 interface in one package (vsMAX3232EIDR)
  • Supports 500 kbps operation from a 3 V to 5.5 V supply (vsMAX232EIPWR)
  • Adds connector-side ESD protection (vsMAX3243EIDW)

Ghi chú thiết kế

Follow the Texas Instruments MAX3243E typical-application layout for the charge-pump capacitors and supply bypass capacitor. Place each capacitor close to the associated IC pin, use the shortest possible supply and ground returns, and avoid routing the RS-232 connector traces beneath sensitive analog or high-speed digital sections. The charge-pump nodes should remain compact and away from external connector wiring.

RS-232 connector pins are exposed to external cables and should be treated as protected interface signals. Maintain a low-impedance chassis or signal-ground path where the product architecture permits, keep the protected serial interface separated from sensitive circuitry, and use the manufacturer pin-description table to identify all connector-facing pins. Verify the final grounding arrangement with the complete enclosure and cable installation.

Do not substitute a related MAX3243 family ordering code solely because the transceiver counts match. Confirm the 28-pin SOIC (DW) footprint, pin assignments, temperature grade, ordering suffix, and external capacitor requirements against the manufacturer part-selection information. Also verify the interface voltage levels and logic polarity of the connected system, since those settings are not interchangeable merely because the package is similar.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The manufacturer product information identifies ±15 kV IEC ESD protection and TIA/EIA-232-F compliance. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer compliance documentation.

Tìm kiếm liên quan

MAX3243EIDWR MAX3243EIDWR datasheet MAX3243EIDWR datasheet pdf MAX3243EIDWR pinout MAX3243EIDWR schematic MAX3243EIDWR equivalent MAX3243EIDWR replacement MAX3243EIDWR cross reference MAX3243EIDWR vs MAX3243EIDW MAX3243EIDWR price MAX3243EIDWR stock Texas Instruments MAX3243EIDWR 28-pin SOIC RS-232 transceiver MAX3243EIDWR industrial RS-232 MAX3243EIDWR 500kbps interface

Các bộ phận và thuật ngữ liên quan

Texas Instruments MAX3243EIDWR MAX3243EIDW MAX3243EIDB MAX3243EIPWR RS-232 transceiver RS-232 line driver RS-232 line receiver interface IC asynchronous serial communication dual charge pump 500 kbps 3 V to 5.5 V TIA/EIA-232-F IEC 61000-4-2 ±15 kV ESD protection 28-pin SOIC DW package surface mount industrial control data acquisition serial port charge-pump capacitor connector grounding RS-232
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ