MAX3243EIDWRG4 - 3/5 RS-232 Transceiver, 250kbps, 5.5V | Texas Instruments
Référence : MAX3243EIDWRG4 ✓ ActifMAX3243EIDWRG4 Présentation
An RS-232 transceiver is a type of interface IC that converts logic-level TTL/CMOS signals into RS-232 differential voltage levels and back again. It belongs to the line driver and receiver family, which sits inside interface ICs, which in turn are part of the wider communication and power management semiconductor hierarchy. Because RS-232 uses single-ended bipolar signalling referenced to ground, a transceiver also handles level translation, slew control and, in this case, electrostatic discharge hardening for connector-facing pins.
Key features of this device include a 3 V to 5.5 V supply range, a 250 kbps maximum data rate, three transmit channels, five receive channels, on-chip charge pump doubling circuitry with external capacitor pins, and plus or minus 15 kV human-body-model ESD protection. The industrial-temperature grade and gull-wing surface-mount SOIC-28 form factor support long-life industrial and instrumentation equipment.
Internally, the driver channels use slew-rate-limited push-pull outputs to limit ringing on long cables, while the receiver channels add hysteresis for noise immunity. The charge-pump and voltage-doubler generate the plus and minus rail voltages required by the RS-232 drivers from a single supply, so no external negative supply is needed. The result is a compact single-chip solution where previously several discrete driver and receiver ICs were required.
Typical applications include industrial serial console and terminal servers, point-of-sale terminals and barcode scanners, access-control and surveillance systems, serial instrumentation, and data-logging equipment that must survive industrial ESD environments.
When designing with this transceiver, keep the external charge-pump capacitors close to their pins, use a solid ground plane reference for the RS-232 return path, and route connector-side traces away from sensitive analog signals. The 250 kbps rate is normally adequate, but cable length and capacitive loading must be checked against the receiver threshold window.
This page consolidates pricing tiers, drop-in replacement options, pin-level detail and practical layout guidance for engineers who need more than the headline parameters on the manufacturer product page.
Alternatives de remplacement direct pour MAX3243EIDWRG4 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MAX3243EIDWRG4 (même facteur de forme et même empreinte) — différant par Package, Product Type, ESD Protection, Maximum Data Rate, Operating Temperature Range.
MAX3243EIDWR
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →MAX3243EIDW
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →TRSF3243IDWRG4
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
TRS3243IDWR
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MAX3243EIDWRG4 Spécifications
| Product Type | Multichannel RS-232 line driver and receiver (3/5 transceiver) |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| Number of Transmit Drivers | 3 |
| Number of Receive Buffers | 5 |
| ESD Protection | +/-15 kV (HBM) on serial pins |
| RS-232 Standard Compliance | TIA/EIA-232-F |
| Boîtier | 28-pin SOIC (DW), gull wing, surface mount |
| Number of Terminals | 28 |
| Temperature Grade | Industrial |
| Peak Reflow Temperature | 260 C |
| Power Supply - Single | Single 3 V to 5.5 V supply, on-chip charge pump for bipolar RS-232 rails |
| External Charge Pump Capacitors | Required (C1 and C2 pins) |
| Type de montage | Surface mount |
| Statut RoHS | Compliant |
| Automotive Qualified (AEC-Q100) | Not applicable |
Configuration des broches de MAX3243EIDWRG4
| Broche 1 | C1+ — Charge pump flying capacitor positive terminal |
| Broche 2 | C1- — Charge pump flying capacitor negative terminal |
| Broche 3 | C2+ — Voltage doubler flying capacitor positive terminal |
| Broche 4 | C2- — Voltage doubler flying capacitor negative terminal |
| Broche 5 | R1OUT — Receiver 1 output (TTL/CMOS logic level) |
| Broche 6 | R2OUT — Receiver 2 output (TTL/CMOS logic level) |
| Broche 7 | R3OUT — Receiver 3 output (TTL/CMOS logic level) |
| Broche 8 | R4OUT — Receiver 4 output (TTL/CMOS logic level) |
| Broche 9 | R5OUT — Receiver 5 output (TTL/CMOS logic level) |
| Broche 10 | R1IN — Receiver 1 input (RS-232 signal) |
| Broche 11 | R2IN — Receiver 2 input (RS-232 signal) |
| Broche 12 | R3IN — Receiver 3 input (RS-232 signal) |
| Broche 13 | R4IN — Receiver 4 input (RS-232 signal) |
| Broche 14 | R5IN — Receiver 5 input (RS-232 signal) |
| Broche 15 | T1IN — Driver 1 logic input (TTL/CMOS) |
| Broche 16 | T2IN — Driver 2 logic input (TTL/CMOS) |
| Broche 17 | T3IN — Driver 3 logic input (TTL/CMOS) |
| Broche 18 | T1OUT — Driver 1 RS-232 output |
| Broche 19 | T2OUT — Driver 2 RS-232 output |
| Broche 20 | T3OUT — Driver 3 RS-232 output |
| Broche 21 | EN — Shutdown enable control input |
| Broche 22 | EN# — Active-low shutdown enable control input |
| Broche 23 | VCC — Positive supply input, 3 V to 5.5 V |
| Broche 24 | GND — Ground reference |
| Broche 25 | V+ — Positive RS-232 rail generated by the charge pump |
| Broche 26 | NC — Not connected (per datasheet) |
| Broche 27 | NC — Not connected (per datasheet) |
| Broche 28 | NC — Not connected (per datasheet) |
Applications typiques
MAX3243EIDWRG4 convient pour 6 applications: Industrial Serial Console and Terminal Servers, Point-of-Sale Terminals and Barcode Scanners, Access Control and Video Surveillance Systems, Serial Instrumentation and Laboratory Test Equipment, PLC, HMI and Data-Logging Equipment, USB-to-RS-232 Bridge Dongles and Adapters.
Industrial Serial Console and Terminal Servers
The MAX3243EIDWRG4 fits multi-port console equipment because it delivers three transmit drivers and five receive buffers on one 28-pin SOIC, letting a single board expose several RS-232 ports to servers, switches and routers. The 250 kbps rate covers legacy management traffic comfortably, while the 3 V to 5.5 V single-supply operation shares the rail with 3.3 V logic. Plus or minus 15 kV HBM ESD protection on the connector pins is valuable where operators plug and unplug cables on the factory floor. In practice the device is placed between the host UART and a DB9 or RJ45 connector block, with the charge-pump capacitors on C1 and C2 routed close to the pins.
Recommandé
Point-of-Sale Terminals and Barcode Scanners
Retail checkout equipment mixes low-speed peripherals with an occasional higher-bandwidth link, which is exactly the mix the MAX3243EIDWRG4 covers with three drivers and five receivers in one package. Peripherals such as barcode scanners, receipt printers and customer displays connect on dedicated RS-232 ports while the controller keeps a spare channel for a scale or mag reader. The industrial-temperature grade and 260 C peak reflow rating let the same part be used in POS hardware built for long product cycles. Its single 3 V to 5.5 V supply simplifies power budgeting in battery-backed terminals, and ESD hardening helps when the scanner lead is unplugged by shop staff.
Recommandé
Access Control and Video Surveillance Systems
Access-control readers, door controllers and camera head-end units commonly mix RS-232 command channels with other low-speed links, and the MAX3243EIDWRG4 consolidates three transmit and five receive channels into a single 28-pin SOIC footprint. That channel density keeps the board area small in enclosure-constrained camera housings. The plus or minus 15 kV HBM ESD rating is a practical benefit because RS-232 connectors in door and camera installations are frequently handled by field technicians, and a single ESD strike on a gate controller is costly. The part also runs from a single 3.3 V rail where the system already uses 3.3 V logic.
Recommandé
Serial Instrumentation and Laboratory Test Equipment
Bench instruments often need several RS-232 channels to drive a device under test, read a fixture controller and log results to a host PC, and the MAX3243EIDWRG4 provides three drivers plus five receivers for exactly that mix. The 250 kbps ceiling is more than adequate for ASCII and binary command protocols common in instrumentation. Because laboratory equipment is frequently reconfigured by users, the connector-side ESD protection of plus or minus 15 kV HBM adds resilience without an external TVS array. Its industrial-grade temperature classification suits equipment specified for factory or field calibration environments rather than pure office use.
Recommandé
PLC, HMI and Data-Logging Equipment
Programmable logic controllers and human-machine interfaces frequently expose RS-232 ports for programming cables, scales, barcode readers and legacy printers, and the MAX3243EIDWRG4 handles up to eight such channels from a single 28-pin SOIC. Having five receivers means the controller can monitor several devices simultaneously without adding another transceiver, and three drivers let it command more than one peripheral at a time. The 3 V to 5.5 V supply range covers both legacy 5 V control boards and modernised 3.3 V designs, and the industrial temperature grade supports use in unheated control cabinets. Follow the datasheet charge-pump capacitor recommendations to keep conversion efficiency and rail ripple predictable.
Recommandé
USB-to-RS-232 Bridge Dongles and Adapters
Compact USB-to-RS-232 adapters benefit from the MAX3243EIDWRG4 because three transmit drivers and five receive buffers let one bridge card support several legacy COM ports on the same USB host controller, which is common in industrial gateway dongles and multi-port protocol converters. The 250 kbps rate is appropriate for the legacy serial devices these adapters serve, and the single 3.3 V or 5 V supply aligns with USB power budgets. Because these dongles are frequently moved between laptops and machines, the plus or minus 15 kV HBM ESD rating on the DB9 or terminal block side reduces field failures. The compact 28-pin SOIC footprint also preserves room for the USB controller and passives on a small board.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MAX3243EIDWRG4 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MAX3243EIDWR | MAX3243EIDW | TRSF3243IDWRG4 | TRS3243IDWR |
|---|---|---|---|---|---|
| Package | SOIC-28 (DW), gull wing | SOIC-28 (DW) - same | SOIC-28 (DW) - same | SOIC-28 (DW) - same | SOIC-28 (DW) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | onsemi | onsemi |
| Transmit drivers | 3 | 3 | 3 | 3 | 3 |
| Receive buffers | 5 | 5 | 5 | 5 | 5 |
| Maximum data rate | 250 kbps | 250 kbps | 250 kbps | 500 kbps | Higher than 250 kbps |
| Supply voltage range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| ESD protection | +/-15 kV (HBM) on serial pins | +/-15 kV (HBM) on serial pins | +/-15 kV (HBM) on serial pins | Not stated in source data | Not stated in source data |
| Temperature grade | Industrial | Industrial | Industrial | Industrial | Industrial |
| RS-232 standard compliance | TIA/EIA-232-F | TIA/EIA-232-F | TIA/EIA-232-F | Not stated in source data | Not stated in source data |
| Charge pump capacitor pins | External C1 and C2 flying capacitors required | External C1 and C2 flying capacitors required | External C1 and C2 flying capacitors required | External flying capacitors required | External flying capacitors required |
Principaux différenciateurs
- Five receive buffers versus the two on a dual-channel transceiver (vs MAX3232EIDR)
- Documented complete replacement with a higher data rate ceiling (vs TRSF3243IDWRG4)
- Single-supply 3 V operation keeps the rail count low in modern mixed-signal boards (vs MAX3243EIDWR)
Notes de conception
Place the two charge-pump flying capacitors directly across pins C1+/C1- and C2+/C2- with the shortest possible traces, and keep the loop area of each capacitor closed to minimise radiated switching noise. Do not route charge-pump traces beneath the RS-232 connector or parallel to receive inputs. The amplifier on the charge pump converts this switching activity into differential voltage on the driver outputs, so long capacitor loops radiate directly into the cable.
RS-232 is a single-ended standard, so the ground reference between the transceiver and the connected equipment matters more than any other layout rule. Provide a solid ground plane, use a short ground return conductor in the cable, and treat the RS-232 ground as a separate return from chassis ground if noise is present. Also keep the receive inputs away from the driver outputs and route them over uninterrupted ground to avoid coupling the high-voltage driver transitions into the low-level receive thresholds.
Estimated: with a 5 V supply, the charge pump must generate roughly plus and minus 6.5 V of RS-232 swing, so supply current rises during transmit activity compared with idle. Budget the 3.3 V versus 5 V supply for the logic domain your host UART runs at and confirm the peak current rating of the supply plus local bulk capacitance. The on-chip charge pump means no external negative rail is needed, which usually removes a discrete inverter and its associated noise source from the design.
The driver outputs are slew-rate limited to control ringing on longer cables, but the RS-232 signal still swings more than 10 V, so treat driver traces as potential emitters. Keep the connector-side copper compact, use a ground reference adjacent to each signal in the connector field, and consider ferrite or common-mode chokes if the equipment is installed next to variable-frequency drives. Incoming cables should be as short as practical, since capacitive loading on long unshielded runs can slow edges enough to cause data errors at the 250 kbps ceiling.
Informations de conformité
RoHS compliance is indicated on distributor product listings for MAX3243EIDWRG4; the G4 suffix denotes the lead-free green-part option. REACH, halogen-free status and conflict-minerals declarations are not stated on the product listings reviewed. The device is an industrial-temperature grade interface IC and is not AEC-Q100 qualified.