MAX351ESE+ - 35Ω Quad SPST Switch | Analog Devices
Référence : MAX351ESE+ ✓ ActifMAX351ESE+ Présentation
An analog switch is an electronic switching component that controls the connection between signal terminals with an external control input. As a normally closed SPST switch, the MAX351ESE+ provides a defined signal path when its control state does not request disconnection. The quad arrangement combines four switching functions in one package, reducing component count and simplifying routing in multi-channel systems. Within the broader hierarchy, it belongs to the analog switch and multiplexer family of interface ICs.
The MAX351ESE+ uses a 35Ω on resistance and offers four 1:1 channels. These characteristics make it useful where moderate-resistance signal routing is acceptable and where compact, surface-mount packaging is preferred over discrete relay or transistor solutions. Its 16-pin SOIC form factor supports conventional PCB assembly and inspection processes.
The device is specified as a precision analog switch rather than a high-speed digital multiplexer. Its SPST architecture simplifies each channel to one independently controlled conductive path. Design decisions should consider signal amplitude, acceptable insertion loss, source and load impedance, switching transients, and the control levels used by the surrounding logic.
Typical uses include instrument signal selection, sensor-interface routing, analog test-point multiplexing, industrial control interfaces, and communication equipment. Four switch sections can manage several related channels without requiring four separate single-switch packages. The SOIC-16 outline also makes the device convenient for designs that already use standard analog and mixed-signal packages.
For PCB implementation, route each switched node directly to its associated package pin and minimize loop area around sensitive analog traces. Confirm the control logic polarity, supply requirements, absolute maximum ratings, and recommended operating conditions in the manufacturer datasheet. Place bypass and signal-conditioning components where they can support low-impedance paths without creating unnecessary parasitic capacitance.
This product page combines the manufacturer product description, exact-orderable-part listings, package details, temperature information, and practical routing guidance. It also identifies same-family drop-in candidates and highlights the electrical checks that must be completed before substituting a normally closed or low-leakage switch into a precision analog path.
Alternatives de remplacement direct pour MAX351ESE+ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MAX351ESE+ (même facteur de forme et même empreinte) — différant par Number of Circuits.
MAX352ESE+
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MAX392ESE+
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MAX327CSE+
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MAX355EWE+
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →MAX351ESE+ Valeurs maximales et caractéristiques électriques
| Switch Configuration | 4 × SPST |
| Number of Circuits | 4 circuits |
| Signal Configuration | 1:1 |
| On Resistance | 35 ohm |
| Plage de température de fonctionnement | -40°C to +85°C |
| Temperature Grade | Industrial |
| Package Type | 16-pin SOIC |
| Package Code | SOP |
| Package Shape | Rectangular |
| Type de montage | Surface mount |
| Number of Terminals | 16 terminals |
| Switch Type | Normally closed SPST analog switch |
Guide de configuration des broches du MAX351ESE+ rectangular
Configuration des broches du MAX351ESE+ (boîtier rectangular). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour MAX351ESE+.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MAX351ESE+ convient pour 6 applications: Precision Test Signal Routing, Industrial Sensor Interface, Analog Test Point Multiplexing, Instrumentation Signal Selection, Data Acquisition Signal Routing, Control and Signal Isolation.
Precision Test Signal Routing
The MAX351ESE+ suits precision test systems that must route one analog signal at a time into a shared measurement chain. Its four normally closed SPST circuits provide four 1:1 paths with a specified 35Ω on resistance, allowing the selected source to reach the instrument front end without redesigning the measurement topology. The 16-pin SOIC package also keeps routing compact. Engineers should account for the 35Ω insertion resistance when calculating source impedance, check leakage during open intervals, and verify that the normally closed state matches the instrument architecture. The manufacturer datasheet should be consulted for control timing and electrical limits.
Recommandé
Industrial Sensor Interface
The MAX351ESE+ can route outputs from multiple industrial sensors into a shared analog input when the system accepts a 35Ω closed-path resistance. Four independent normally closed SPST sections reduce the number of discrete switch packages required for a multi-channel interface. Its industrial -40°C to +85°C rating is suitable for equipment operating across a wide ambient range, while the surface-mount SOIC-16 package supports automated board assembly. Signal conditioning, protection, and grounding should be arranged so switch resistance does not degrade measurement accuracy. Confirm leakage, switching transients, and control levels against the manufacturer datasheet.
Recommandé
Analog Test Point Multiplexing
The MAX351ESE+ is appropriate for compact analog test-point multiplexing where four related nodes must be selected for monitoring or calibration. Its 1:1 SPST paths preserve the signal function without adding another multiplexing stage, and the 35Ω on resistance is predictable enough for many low-impedance measurement configurations. The normally closed state provides a defined connection when control commands are inactive, which can simplify fault-safe routing. Layout should keep switched traces short and connect a quiet return path to avoid injecting noise into the selected node. Use the manufacturer pinout to maintain consistent control-line routing across all four channels.
Recommandé
Instrumentation Signal Selection
The MAX351ESE+ can implement front-end signal selection in measurement instruments that need to choose among several analog sources. Four 1:1 switch sections provide separate paths within one 16-pin SOIC package, helping reduce board area and component count. The 35Ω resistance must be included in the source impedance presented to the following amplifier or converter, while leakage and switch transients matter when handling high-impedance sources. Place the device near the selected inputs, provide a continuous ground reference, and isolate control traces from sensitive analog nets. Verify timing and supply requirements in the MAX351 manufacturer datasheet.
Recommandé
Data Acquisition Signal Routing
The MAX351ESE+ can route several conditioned analog inputs within a data-acquisition subsystem when the acquisition chain tolerates the specified 35Ω path resistance. Four normally closed SPST channels offer a straightforward selection structure for multiplexed sensors or calibrated sources. The device's industrial temperature range and surface-mount SOIC-16 format support compact controller boards, but the entire signal path must be evaluated for settling behavior, off-state isolation, and control-signal crosstalk. Keep input and output routing direct, maintain uninterrupted ground planes, and follow the manufacturer pin description for every control input.
Recommandé
Control and Signal Isolation
The MAX351ESE+ can connect or disconnect control, feedback, or reference signals in industrial control assemblies that require four independent switching points. Its normally closed SPST behavior is useful when de-energized or inactive control states should retain a defined path. The 35Ω resistance remains suitable for many control and low-current feedback networks, while the -40°C to +85°C industrial range supports extended operating environments. Ensure switched loads cannot exceed the absolute maximum ratings and that control transients do not couple into adjacent channels. A solid ground plane and short return paths will reduce switching-related disturbance.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MAX351ESE+ — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MAX352ESE+ | MAX392ESE+ | MAX327CSE+ | MAX355EWE |
|---|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-pin NSOIC | 16-SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Number of Circuits | 4 | 4 | 4 | 4 | 4 |
| Number of Terminals | 16 | 16 | 16 | 16 | 16 |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
Principaux différenciateurs
- Normally closed four-channel routing in a standard 16-pin SOIC (vs MAX352ESE+)
- Directly identified complete-replacement path (vs MAX392ESE+)
- Defined 35Ω on-resistance specification (vs MAX327CSE+)
Notes de conception
Include the 35Ω on resistance in the complete signal-path impedance calculation for every switched channel. This is especially important when driving a high-impedance amplifier or sampling a precision sensor. Place the switch close to the source and destination connectors, keep analog traces short, and provide a continuous ground reference so that the inserted path resistance is not compounded by long traces or excessive return inductance.
Route all four control inputs away from high-impedance analog nets and connect their return currents to the same solid ground system used by the switched signals. The MAX351 uses four independent SPST sections, so consistent control timing and clean grounding help prevent switching activity from coupling into an active measurement path. Check the manufacturer pin-description table before assigning control pins or PCB tracks.
Do not approve a replacement solely from package and channel count. MAX352ESE+ has the opposite normally open or normally closed behavior, while MAX327CSE+ emphasizes low leakage and may differ in resistance and timing. Compare switch polarity, on resistance, leakage, supply range, control levels, switching time, and absolute maximum ratings before treating any candidate as a drop-in replacement.
Informations de conformité
The MAX351 is an industrial analog switch rather than an automotive-qualified AEC-Q100 device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current compliance documentation.