Analog Devices

MAX351ESE+ - 35Ω Quad SPST Switch | Analog Devices

MPN: MAX351ESE+ ✓ Hoạt động
35 ohm Rds(on) 16-pin SOIC Package
MOQ: 1 |

MAX351ESE+ Tóm tắt

The Analog Devices MAX351ESE+ is a precision, quad, SPST analog switch with a 1:1 signal configuration, 35Ω on resistance, and a 16-pin SOIC package. The four independent switch circuits are designed for routing low-frequency analog signals in test, measurement, instrumentation, and industrial control systems. Its industrial temperature grade supports operation from -40°C to +85°C.

An analog switch is an electronic switching component that controls the connection between signal terminals with an external control input. As a normally closed SPST switch, the MAX351ESE+ provides a defined signal path when its control state does not request disconnection. The quad arrangement combines four switching functions in one package, reducing component count and simplifying routing in multi-channel systems. Within the broader hierarchy, it belongs to the analog switch and multiplexer family of interface ICs.

The MAX351ESE+ uses a 35Ω on resistance and offers four 1:1 channels. These characteristics make it useful where moderate-resistance signal routing is acceptable and where compact, surface-mount packaging is preferred over discrete relay or transistor solutions. Its 16-pin SOIC form factor supports conventional PCB assembly and inspection processes.

The device is specified as a precision analog switch rather than a high-speed digital multiplexer. Its SPST architecture simplifies each channel to one independently controlled conductive path. Design decisions should consider signal amplitude, acceptable insertion loss, source and load impedance, switching transients, and the control levels used by the surrounding logic.

Typical uses include instrument signal selection, sensor-interface routing, analog test-point multiplexing, industrial control interfaces, and communication equipment. Four switch sections can manage several related channels without requiring four separate single-switch packages. The SOIC-16 outline also makes the device convenient for designs that already use standard analog and mixed-signal packages.

For PCB implementation, route each switched node directly to its associated package pin and minimize loop area around sensitive analog traces. Confirm the control logic polarity, supply requirements, absolute maximum ratings, and recommended operating conditions in the manufacturer datasheet. Place bypass and signal-conditioning components where they can support low-impedance paths without creating unnecessary parasitic capacitance.

This product page combines the manufacturer product description, exact-orderable-part listings, package details, temperature information, and practical routing guidance. It also identifies same-family drop-in candidates and highlights the electrical checks that must be completed before substituting a normally closed or low-leakage switch into a precision analog path.

Bộ thay thế dễ dàng lắp đặt cho MAX351ESE+ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX351ESE+ (cùng hình factor và footprint) — khác nhau ở Number of Circuits.

Maxim Integrated
Number of Circuits: 2 circuits
So sánh với MAX351ESE+ →

MAX352ESE+

✅ Drop-In
📦 16-SOIC
Retains four channels and the 16-pin SOIC footprint, but changes the default SPST conduction state from normally closed to normally open; 0% change in channel count and pin count

📋 Tham chiếu thay thế (không có trong danh mục)

MAX392ESE+

✅ Drop-In
📦 16-SOIC
Cross-reference information describes consistent terminals, package, and main performance parameters, with four switches and 16 pins matching the target; 0% change in channel and pin count

📋 Tham chiếu thay thế (không có trong danh mục)

MAX327CSE+

✅ Drop-In
📦 16-SOIC
Retains four SPST channels in a 16-pin NSOIC package while emphasizing ultra-low leakage; channel and pin counts match, while resistance and leakage values are not stated

📋 Tham chiếu thay thế (không có trong danh mục)

MAX355EWE+

✅ Drop-In
Maxim Integrated
📦 16-SOIC
Dual 4:1 analog multiplexer · 2 circuits · 8 channels total · SP4T · 350 ohm · 4.5 V to 36 V · Up to 40 V beyond supply rails · Series N-channel, P-channel, N-channel structure

Liên hệ để biết giá

Xem tài liệu →

MAX351ESE+ Tỷ lệ tối đa & tính chất điện

Switch Configuration 4 × SPST
Number of Circuits 4 circuits
Signal Configuration 1:1
On Resistance 35 ohm
Khoảng nhiệt độ hoạt động -40°C to +85°C
Temperature Grade Industrial
Package Type 16-pin SOIC
Package Code SOP
Package Shape Rectangular
Kiểu lắp đặt Surface mount
Number of Terminals 16 terminals
Switch Type Normally closed SPST analog switch

Hướng dẫn cấu hình chân MAX351ESE+ rectangular

Cấu hình chân cho MAX351ESE+ (rectangular gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân rectangular cho MAX351ESE+

Không có dữ liệu chân cụ thể sẵn có cho MAX351ESE+.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MAX351ESE+ phù hợp cho 6 Áp dụngs: Precision Test Signal Routing, Industrial Sensor Interface, Analog Test Point Multiplexing, Instrumentation Signal Selection, Data Acquisition Signal Routing, Control and Signal Isolation.

🔧

Precision Test Signal Routing

The MAX351ESE+ suits precision test systems that must route one analog signal at a time into a shared measurement chain. Its four normally closed SPST circuits provide four 1:1 paths with a specified 35Ω on resistance, allowing the selected source to reach the instrument front end without redesigning the measurement topology. The 16-pin SOIC package also keeps routing compact. Engineers should account for the 35Ω insertion resistance when calculating source impedance, check leakage during open intervals, and verify that the normally closed state matches the instrument architecture. The manufacturer datasheet should be consulted for control timing and electrical limits.

🏭

Industrial Sensor Interface

The MAX351ESE+ can route outputs from multiple industrial sensors into a shared analog input when the system accepts a 35Ω closed-path resistance. Four independent normally closed SPST sections reduce the number of discrete switch packages required for a multi-channel interface. Its industrial -40°C to +85°C rating is suitable for equipment operating across a wide ambient range, while the surface-mount SOIC-16 package supports automated board assembly. Signal conditioning, protection, and grounding should be arranged so switch resistance does not degrade measurement accuracy. Confirm leakage, switching transients, and control levels against the manufacturer datasheet.

📊

Analog Test Point Multiplexing

The MAX351ESE+ is appropriate for compact analog test-point multiplexing where four related nodes must be selected for monitoring or calibration. Its 1:1 SPST paths preserve the signal function without adding another multiplexing stage, and the 35Ω on resistance is predictable enough for many low-impedance measurement configurations. The normally closed state provides a defined connection when control commands are inactive, which can simplify fault-safe routing. Layout should keep switched traces short and connect a quiet return path to avoid injecting noise into the selected node. Use the manufacturer pinout to maintain consistent control-line routing across all four channels.

🎧

Instrumentation Signal Selection

The MAX351ESE+ can implement front-end signal selection in measurement instruments that need to choose among several analog sources. Four 1:1 switch sections provide separate paths within one 16-pin SOIC package, helping reduce board area and component count. The 35Ω resistance must be included in the source impedance presented to the following amplifier or converter, while leakage and switch transients matter when handling high-impedance sources. Place the device near the selected inputs, provide a continuous ground reference, and isolate control traces from sensitive analog nets. Verify timing and supply requirements in the MAX351 manufacturer datasheet.

🖥️

Data Acquisition Signal Routing

The MAX351ESE+ can route several conditioned analog inputs within a data-acquisition subsystem when the acquisition chain tolerates the specified 35Ω path resistance. Four normally closed SPST channels offer a straightforward selection structure for multiplexed sensors or calibrated sources. The device's industrial temperature range and surface-mount SOIC-16 format support compact controller boards, but the entire signal path must be evaluated for settling behavior, off-state isolation, and control-signal crosstalk. Keep input and output routing direct, maintain uninterrupted ground planes, and follow the manufacturer pin description for every control input.

⚡

Control and Signal Isolation

The MAX351ESE+ can connect or disconnect control, feedback, or reference signals in industrial control assemblies that require four independent switching points. Its normally closed SPST behavior is useful when de-energized or inactive control states should retain a defined path. The 35Ω resistance remains suitable for many control and low-current feedback networks, while the -40°C to +85°C industrial range supports extended operating environments. Ensure switched loads cannot exceed the absolute maximum ratings and that control transients do not couple into adjacent channels. A solid ground plane and short return paths will reduce switching-related disturbance.

Tóm tắt các sản phẩm được đề xuất

MAX351ESE+ Analog Devices Được sử dụng trong: Precision Test Signal Routing, Industrial Sensor Interface, Analog Test Point Multiplexing, Instrumentation Signal Selection, Data Acquisition Signal Routing, Control and Signal Isolation MAX392ESE+ Same-family package-compatible routing reference Được sử dụng trong: Precision Test Signal Routing, Instrumentation Signal Selection MAX327CSE+ Low-leakage family reference for sensitive interfaces Được sử dụng trong: Industrial Sensor Interface, Data Acquisition Signal Routing MAX352ESE+ Opposite-state package-compatible comparison Được sử dụng trong: Analog Test Point Multiplexing, Control and Signal Isolation
What is the MAX351ESE+?
The MAX351ESE+ is a precision, quad, SPST analog switch from Analog Devices with four 1:1 circuits, 35Ω on resistance, and a 16-pin SOIC package. According to the MAX351 manufacturer product page and datasheet, it is intended for routing analog signals through independently controlled switch sections. The device is available in an industrial-temperature version rated for -40°C to +85°C.
How many switch circuits does MAX351ESE+ have?
The MAX351ESE+ contains four SPST switch circuits in one 16-pin SOIC package. Each circuit provides a 1:1 signal configuration, and the listed on resistance is 35Ω. The MAX351 manufacturer product page identifies the product as a precision quad SPST analog switch, allowing several independently routed analog signals to be handled with a single package.
What is the on resistance of MAX351ESE+?
The MAX351ESE+ has a specified on resistance of 35Ω. According to the MAX351 manufacturer product page and the MAX351ESE datasheet, this value applies to the closed switch path and should be considered together with source and load impedance. The 35Ω figure distinguishes the device from low-resistance RF switch families and helps determine whether insertion loss is acceptable for the intended signal.
What package does MAX351ESE+ use?
The MAX351ESE+ is packaged in a 16-pin SOIC with a rectangular surface-mount package shape and SOP package code. The exact-orderable-part listing identifies 16 terminals and surface mounting. This package corresponds to the 16-lead small-outline integrated-circuit family and is suitable for conventional reflow assembly on PCB land patterns designed for 16-pin SOIC devices.
Where can I download the MAX351ESE+ datasheet PDF?
The official MAX351 datasheet is available through the Analog Devices product page at https://www.analog.com/en/products/MAX351.html. The manufacturer page identifies the document as the MAX351 Data Sheet, Revision 2, and provides the product documentation. Use that document to verify the complete pin description, control truth table, recommended operating conditions, and absolute maximum ratings before layout or substitution.
Where is the MAX351ESE+ pinout located?
The MAX351ESE+ pinout is located in the manufacturer datasheet linked from the official MAX351 product page. The device uses a 16-pin SOIC package, but the individual pin names and control states are not reproduced on this page. Use the pin-description table and package drawing in the MAX351 Data Sheet, Revision 2, to assign PCB tracks and verify the normally closed switch behavior.
Can MAX352ESE+ replace MAX351ESE+?
The MAX352ESE+ is a candidate for a board-level review because it is identified as a same-package, pin-compatible replacement with the same four-switch and 16-pin SOIC structure. However, the MAX352 family is normally associated with the opposite switch state, while the MAX351 is normally closed. According to the manufacturer product family information, verify the control truth table, signal polarity, electrical ratings, and operating conditions before approving the substitution.
Can MAX392ESE+ replace MAX351ESE+?
The MAX392ESE+ is identified in cross-reference information as a complete replacement whose terminals and package are consistent with MAX351ESE+. Both devices use a 16-pin package and provide four analog-switch channels, making the footprint suitable for direct review. The source describes their main performance parameters and functional characteristics as consistent, but system engineers should still verify control polarity, supply voltage, on resistance, leakage, and timing.
What is the best drop-in replacement for MAX351ESE+?
The MAX392ESE+ is the strongest directly identified drop-in candidate because the cross-reference information describes it as a complete replacement with consistent terminals, package, and principal performance characteristics. The MAX352ESE+ is also package-compatible but changes normally closed to normally open behavior. The MAX351ESE+ itself should remain preferred when exact switching state and verified timing are more important than alternate sourcing.
When should I choose MAX351ESE+ over MAX352ESE+?
Choose MAX351ESE+ when the circuit requires a normally closed SPST path, whereas the MAX352 family provides the opposite switching state. The MAX351ESE+ uses four switch sections, a 1:1 configuration, 35Ω on resistance, and a 16-pin SOIC package. According to the manufacturer family descriptions, replacing it with MAX352ESE+ changes the default conduction state even if the footprint and channel count remain compatible.
MAX351ESE+ vs MAX392ESE+: which is better for analog routing?
The MAX351ESE+ is preferable when the original design depends on the exact MAX351 control behavior, timing, and electrical characteristics. The MAX392ESE+ is attractive for replacement flexibility because cross-reference information describes its terminals, package, main performance parameters, and functional characteristics as consistent. For new precision-routing designs, compare the manufacturer datasheets for on resistance, leakage, switching time, supply range, and channel polarity before selecting.
Is MAX351ESE+ suitable for industrial instrumentation?
The MAX351ESE+ is suitable for industrial instrumentation when its 35Ω on resistance is acceptable for the signal path. The exact-orderable part is identified as industrial grade and operates from -40°C to +85°C. Its four normally closed SPST circuits can route multiple analog signals, although instrumentation designs must account for insertion loss, leakage, control transients, and grounding.
What is the operating temperature range of MAX351ESE+?
The MAX351ESE+ operates from -40°C to +85°C in its industrial-grade version. According to the exact-orderable-part listing and MAX351 manufacturer documentation, this temperature coverage supports industrial equipment and other systems expected to operate across extended ambient ranges. Design margins must also be checked against the maximum junction temperature and any self-heating effects.
Where can I buy MAX351ESE+ online?
Use the Request a Quote form on this page to request MAX351ESE+ availability, minimum order quantity, current lead time, and a quotation for the exact 16-pin SOIC orderable part. The part is listed by multiple authorized supply channels, but inventory and commercial terms can change quickly. Provide the target quantity and required delivery date with the quote request for an actionable response.
How much does MAX351ESE+ cost and what is its lead time?
Current commercial terms for MAX351ESE+ should be requested through the Request a Quote form on this page. The form can return current availability, unit pricing, minimum order quantity, and lead time for the exact MPN. Do not rely on an archived unit price when planning production because component pricing and stock conditions can change without notice.
Is MAX351ESE+ in stock?
Current MAX351ESE+ stock should be confirmed through the Request a Quote form on this page. Some listings indicate immediate shipment while another channel marks the exact part out of stock, demonstrating that availability changes by source and time. Request the quantity, shipment destination, and required date so the quote reflects the current supply position.
What are the key specifications of MAX351ESE+ that engineers should know?
The key MAX351ESE+ specifications are four independent SPST channels, a 1:1 signal configuration, 35Ω on resistance, a 16-pin SOIC package, and an industrial temperature range of -40°C to +85°C. According to the MAX351 manufacturer product page and exact-orderable-part listing, the device is a precision surface-mount analog switch. Supply voltage, leakage, switching time, and control logic must be taken from the manufacturer datasheet for final design validation.

Dữ liệu tham khảo kỹ thuật cho MAX351ESE+ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose MAX351ESE+ when the design depends on four normally closed SPST paths, a defined 35Ω on resistance, and the industrial -40°C to +85°C operating range. MAX392ESE+ is the preferred alternative for continuity when a directly identified complete replacement is needed, but the manufacturer data should still be checked for every operating limit. MAX352ESE+ is useful only if the board can accommodate normally open rather than normally closed behavior. MAX327CSE+ deserves consideration when very low leakage is more important than the target's characterized switching behavior, provided on resistance and timing meet the application. MAX355EWE remains a same-family review candidate, although its detailed electrical differences are not identified. For production equivalence, compare pin functions, control truth table, supply voltage, leakage, switching time, and absolute maximum ratings—not only the SOIC-16 footprint.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MAX352ESE+ MAX392ESE+ MAX327CSE+ MAX355EWE
Package 16-SOIC 16-SOIC 16-SOIC 16-pin NSOIC 16-SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Number of Circuits 4 4 4 4 4
Number of Terminals 16 16 16 16 16
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount

Bảo phân biệt quan trọng

  • Normally closed four-channel routing in a standard 16-pin SOIC (vsMAX352ESE+)
  • Directly identified complete-replacement path (vsMAX392ESE+)
  • Defined 35Ω on-resistance specification (vsMAX327CSE+)

Ghi chú thiết kế

Include the 35Ω on resistance in the complete signal-path impedance calculation for every switched channel. This is especially important when driving a high-impedance amplifier or sampling a precision sensor. Place the switch close to the source and destination connectors, keep analog traces short, and provide a continuous ground reference so that the inserted path resistance is not compounded by long traces or excessive return inductance.

Route all four control inputs away from high-impedance analog nets and connect their return currents to the same solid ground system used by the switched signals. The MAX351 uses four independent SPST sections, so consistent control timing and clean grounding help prevent switching activity from coupling into an active measurement path. Check the manufacturer pin-description table before assigning control pins or PCB tracks.

Do not approve a replacement solely from package and channel count. MAX352ESE+ has the opposite normally open or normally closed behavior, while MAX327CSE+ emphasizes low leakage and may differ in resistance and timing. Compare switch polarity, on resistance, leakage, supply range, control levels, switching time, and absolute maximum ratings before treating any candidate as a drop-in replacement.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The MAX351 is an industrial analog switch rather than an automotive-qualified AEC-Q100 device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current compliance documentation.

Dữ liệu được xác minh vào: 2026-11-18 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

MAX351ESE+ datasheet MAX351ESE+ pinout MAX351ESE+ datasheet pdf MAX351ESE+ equivalent MAX351ESE+ replacement MAX351ESE+ cross reference MAX351ESE+ vs MAX392ESE+ MAX351ESE+ vs MAX352ESE+ MAX351ESE+ footprint MAX351ESE+ price MAX351ESE+ stock Analog Devices MAX351ESE+

Các bộ phận và thuật ngữ liên quan

Analog Devices MAX351ESE+ MAX351 MAX352ESE+ MAX392ESE+ MAX327CSE+ MAX355EWE precision analog switch SPST switch normally closed switch quad analog switch multiplexer interface IC semiconductor 35 ohm on resistance 16-pin SOIC SOIC package family surface-mount package SMD industrial temperature grade analog signal routing test-point multiplexing sensor interface signal isolation data acquisition
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ