MAX351ESE+ - 35Ω Quad SPST Switch | Analog Devices
MPN: MAX351ESE+ ✓ 啟用中MAX351ESE+ 概覽
An analog switch is an electronic switching component that controls the connection between signal terminals with an external control input. As a normally closed SPST switch, the MAX351ESE+ provides a defined signal path when its control state does not request disconnection. The quad arrangement combines four switching functions in one package, reducing component count and simplifying routing in multi-channel systems. Within the broader hierarchy, it belongs to the analog switch and multiplexer family of interface ICs.
The MAX351ESE+ uses a 35Ω on resistance and offers four 1:1 channels. These characteristics make it useful where moderate-resistance signal routing is acceptable and where compact, surface-mount packaging is preferred over discrete relay or transistor solutions. Its 16-pin SOIC form factor supports conventional PCB assembly and inspection processes.
The device is specified as a precision analog switch rather than a high-speed digital multiplexer. Its SPST architecture simplifies each channel to one independently controlled conductive path. Design decisions should consider signal amplitude, acceptable insertion loss, source and load impedance, switching transients, and the control levels used by the surrounding logic.
Typical uses include instrument signal selection, sensor-interface routing, analog test-point multiplexing, industrial control interfaces, and communication equipment. Four switch sections can manage several related channels without requiring four separate single-switch packages. The SOIC-16 outline also makes the device convenient for designs that already use standard analog and mixed-signal packages.
For PCB implementation, route each switched node directly to its associated package pin and minimize loop area around sensitive analog traces. Confirm the control logic polarity, supply requirements, absolute maximum ratings, and recommended operating conditions in the manufacturer datasheet. Place bypass and signal-conditioning components where they can support low-impedance paths without creating unnecessary parasitic capacitance.
This product page combines the manufacturer product description, exact-orderable-part listings, package details, temperature information, and practical routing guidance. It also identifies same-family drop-in candidates and highlights the electrical checks that must be completed before substituting a normally closed or low-leakage switch into a precision analog path.
直接替換替代品,適用於 MAX351ESE+ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX351ESE+ (相同外形與佔位) — 差異在於 Number of Circuits.
MAX352ESE+
✅ 直接替換📋 參考替代品(不在目錄中)
MAX392ESE+
✅ 直接替換📋 參考替代品(不在目錄中)
MAX327CSE+
✅ 直接替換📋 參考替代品(不在目錄中)
MAX355EWE+
✅ 直接替換聯絡詢價
查看資料表 →MAX351ESE+ 最大額定值與電氣特性
| Switch Configuration | 4 × SPST |
| Number of Circuits | 4 circuits |
| Signal Configuration | 1:1 |
| On Resistance | 35 ohm |
| 工作溫度範圍 | -40°C to +85°C |
| Temperature Grade | Industrial |
| Package Type | 16-pin SOIC |
| Package Code | SOP |
| Package Shape | Rectangular |
| 安裝類型 | Surface mount |
| Number of Terminals | 16 terminals |
| Switch Type | Normally closed SPST analog switch |
MAX351ESE+ rectangular 腳位配置指南
MAX351ESE+(rectangular 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX351ESE+.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX351ESE+ 適用於 6 應用s: Precision Test Signal Routing, Industrial Sensor Interface, Analog Test Point Multiplexing, Instrumentation Signal Selection, Data Acquisition Signal Routing, Control and Signal Isolation.
Precision Test Signal Routing
The MAX351ESE+ suits precision test systems that must route one analog signal at a time into a shared measurement chain. Its four normally closed SPST circuits provide four 1:1 paths with a specified 35Ω on resistance, allowing the selected source to reach the instrument front end without redesigning the measurement topology. The 16-pin SOIC package also keeps routing compact. Engineers should account for the 35Ω insertion resistance when calculating source impedance, check leakage during open intervals, and verify that the normally closed state matches the instrument architecture. The manufacturer datasheet should be consulted for control timing and electrical limits.
推薦
Industrial Sensor Interface
The MAX351ESE+ can route outputs from multiple industrial sensors into a shared analog input when the system accepts a 35Ω closed-path resistance. Four independent normally closed SPST sections reduce the number of discrete switch packages required for a multi-channel interface. Its industrial -40°C to +85°C rating is suitable for equipment operating across a wide ambient range, while the surface-mount SOIC-16 package supports automated board assembly. Signal conditioning, protection, and grounding should be arranged so switch resistance does not degrade measurement accuracy. Confirm leakage, switching transients, and control levels against the manufacturer datasheet.
推薦
Analog Test Point Multiplexing
The MAX351ESE+ is appropriate for compact analog test-point multiplexing where four related nodes must be selected for monitoring or calibration. Its 1:1 SPST paths preserve the signal function without adding another multiplexing stage, and the 35Ω on resistance is predictable enough for many low-impedance measurement configurations. The normally closed state provides a defined connection when control commands are inactive, which can simplify fault-safe routing. Layout should keep switched traces short and connect a quiet return path to avoid injecting noise into the selected node. Use the manufacturer pinout to maintain consistent control-line routing across all four channels.
推薦
Instrumentation Signal Selection
The MAX351ESE+ can implement front-end signal selection in measurement instruments that need to choose among several analog sources. Four 1:1 switch sections provide separate paths within one 16-pin SOIC package, helping reduce board area and component count. The 35Ω resistance must be included in the source impedance presented to the following amplifier or converter, while leakage and switch transients matter when handling high-impedance sources. Place the device near the selected inputs, provide a continuous ground reference, and isolate control traces from sensitive analog nets. Verify timing and supply requirements in the MAX351 manufacturer datasheet.
推薦
Data Acquisition Signal Routing
The MAX351ESE+ can route several conditioned analog inputs within a data-acquisition subsystem when the acquisition chain tolerates the specified 35Ω path resistance. Four normally closed SPST channels offer a straightforward selection structure for multiplexed sensors or calibrated sources. The device's industrial temperature range and surface-mount SOIC-16 format support compact controller boards, but the entire signal path must be evaluated for settling behavior, off-state isolation, and control-signal crosstalk. Keep input and output routing direct, maintain uninterrupted ground planes, and follow the manufacturer pin description for every control input.
推薦
Control and Signal Isolation
The MAX351ESE+ can connect or disconnect control, feedback, or reference signals in industrial control assemblies that require four independent switching points. Its normally closed SPST behavior is useful when de-energized or inactive control states should retain a defined path. The 35Ω resistance remains suitable for many control and low-current feedback networks, while the -40°C to +85°C industrial range supports extended operating environments. Ensure switched loads cannot exceed the absolute maximum ratings and that control transients do not couple into adjacent channels. A solid ground plane and short return paths will reduce switching-related disturbance.
推薦
推薦產品摘要
工程參考資料,適用於 MAX351ESE+ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX352ESE+ | MAX392ESE+ | MAX327CSE+ | MAX355EWE |
|---|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-pin NSOIC | 16-SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Number of Circuits | 4 | 4 | 4 | 4 | 4 |
| Number of Terminals | 16 | 16 | 16 | 16 | 16 |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
主要差異化特點
- Normally closed four-channel routing in a standard 16-pin SOIC (對比MAX352ESE+)
- Directly identified complete-replacement path (對比MAX392ESE+)
- Defined 35Ω on-resistance specification (對比MAX327CSE+)
設計說明
Include the 35Ω on resistance in the complete signal-path impedance calculation for every switched channel. This is especially important when driving a high-impedance amplifier or sampling a precision sensor. Place the switch close to the source and destination connectors, keep analog traces short, and provide a continuous ground reference so that the inserted path resistance is not compounded by long traces or excessive return inductance.
Route all four control inputs away from high-impedance analog nets and connect their return currents to the same solid ground system used by the switched signals. The MAX351 uses four independent SPST sections, so consistent control timing and clean grounding help prevent switching activity from coupling into an active measurement path. Check the manufacturer pin-description table before assigning control pins or PCB tracks.
Do not approve a replacement solely from package and channel count. MAX352ESE+ has the opposite normally open or normally closed behavior, while MAX327CSE+ emphasizes low leakage and may differ in resistance and timing. Compare switch polarity, on resistance, leakage, supply range, control levels, switching time, and absolute maximum ratings before treating any candidate as a drop-in replacement.
合規資訊
The MAX351 is an industrial analog switch rather than an automotive-qualified AEC-Q100 device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current compliance documentation.