onsemi

MC34071PG - 44V Single Op Amp, 4.5MHz | onsemi

Référence : MC34071PG ✓ Actif
3.0 V to 44 V Vdss 8-pin PDIP (0.300 in, 7.62 mm pitch) Package
MOQ : 1 |

MC34071PG Présentation

The onsemi MC34071PG is a single operational amplifier with a 3 V to 44 V single-supply operating range, 4.5 MHz gain-bandwidth product, and 13 V/µs slew rate, supplied in an 8-pin PDIP package. It is designed for general-purpose instrumentation and signal-conditioning applications where wide supply-voltage tolerance, fast slew, and a conventional bipolar input stage are useful.

An operational amplifier, or op amp, is a voltage-controlled differential amplifier used to amplify or buffer signals in electronic systems. The MC34071 belongs to the broader hierarchy of operational amplifiers, analog amplifiers, and signal-chain semiconductors. Its wide supply range allows it to operate from conventional 5 V and 12 V rails as well as higher industrial voltage systems, although the complete circuit must remain within the device's absolute maximum ratings.

Key characteristics include a 4.5 MHz gain-bandwidth product, 13 V/µs slew rate, single-ended input configuration, and a general-purpose amplifier design. The manufacturer describes the MC34071 series as using quality bipolar fabrication and innovative design concepts. The bipolar approach supports conventional op-amp behavior and is useful in applications requiring signal amplification, buffering, active filtering, and general analog control functions.

The device's fast settling performance and 13 V/µs slew rate make it more responsive than slow precision-oriented amplifiers. This is beneficial for instrumentation and feedback loops that need to follow changing input waveforms. Designers should still account for input and output voltage limits, common-mode range, output-current capability, supply decoupling, and stability when driving capacitive or nonlinear loads.

Typical uses include industrial process-control instrumentation, sensor signal conditioning, audio and communications support circuits, active filters, voltage followers, and general laboratory measurement equipment. Because the MC34071PG is a through-hole PDIP device, it is especially convenient for prototyping, educational systems, repair work, and applications where socketed or manually soldered assembly is acceptable.

For reliable operation, decouple the supply pins close to the device and provide stable reference and feedback paths. Avoid forcing the output beyond its rated output-voltage swing, and check the input common-mode range over the complete operating range. Use the manufacturer pin description and electrical characteristics tables when assigning PCB nets and designing around input offset, bias current, supply current, and output-drive limits.

This product page combines manufacturer specifications, package information, design guidance, drop-in alternatives, and a parameter-by-parameter comparison to support faster component selection and PCB-level planning for MC34071PG-based analog circuits.

Alternatives de remplacement direct pour MC34071PG — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec MC34071PG (même facteur de forme et même empreinte) — différant par Mounting Type, Package.

onsemi
Mounting Type: Through hole
Package: 8-DIP (0.300 inch, 7.62 mm pitch)
Comparer avec MC34071PG →

MC34071APG

✅ Remplacement direct
📦 PDIP-8
Same MC34071 family and PDIP-8 footprint; grade or offset-bin details should be confirmed for the exact ordering code

📋 Alternative de référence (hors catalogue)

MC34071P

✅ Remplacement direct
onsemi
📦 PDIP-8
Single operational amplifier · 1 circuit · 3.0 V to 44 V · 5.0 V · 3.0 V at 25°C · 5 mV · Bipolar fabrication · 8-DIP (0.300 inch, 7.62 mm pitch)

Contactez-nous pour le prix

Voir la fiche technique →

UA741CPE4

✅ Remplacement direct
📦 PDIP-8
Same PDIP-8 package, but the UA741 is a different amplifier family; gain-bandwidth, offset, bias-current, common-mode, and supply characteristics require direct verification

📋 Alternative de référence (hors catalogue)

MC34071PG Valeurs maximales et caractéristiques électriques

Product Type Single operational amplifier
Number of Circuits 1 circuit
Amplifier Type General-purpose
Single-Supply Voltage Range 3.0 V to 44 V
Gain-Bandwidth Product 4.5 MHz
Slew Rate 13 V/µs
Input Configuration Single-ended
Process Technology Bipolar
Boîtier 8-pin PDIP (0.300 in, 7.62 mm pitch)
Package Type PDIP-8
Type de montage Through-hole
Packaging Tube
Temperature Grade Commercial
Terminal Count 8 terminals
AEC-Q100 Qualification Not applicable

Guide de configuration des broches du MC34071PG pdip-8

Configuration des broches du MC34071PG (boîtier pdip-8). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier pdip-8 pour le MC34071PG

Aucune donnée de brochage détaillée disponible pour MC34071PG.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MC34071PG convient pour 6 applications: Industrial Sensor Signal Conditioning, Active Audio Filter, Precision Test and Measurement Buffer, Communications Interface Buffer, Power Supply Feedback Control, Educational and Prototype Analog Circuit.

🏭

Industrial Sensor Signal Conditioning

The MC34071PG fits industrial sensor front ends that need a fast general-purpose amplifier stage between a transducer and a measurement or control circuit. Its 4.5 MHz gain-bandwidth product provides more bandwidth than a slow precision-only amplifier, while 13 V/µs slew rate helps the output follow rapidly changing sensor signals. The 3 V to 44 V single-supply range also supports a broad range of industrial rail conditions. Because the MC34071PG uses a bipolar input stage, the design should include offset-voltage, bias-current, and common-mode checks against the sensor output. Place power-bypass capacitors near the device, keep feedback traces short, and verify the sensor's full output range before choosing the gain and reference network.

🎧

Active Audio Filter

The MC34071PG is suitable for active filtering in audio and communications equipment where a conventional general-purpose op amp with moderate speed is sufficient. Its 4.5 MHz gain-bandwidth product and 13 V/µs slew rate provide ample response for many low- and mid-frequency audio stages, while the single 3 V to 44 V supply simplifies integration with varied rails. The bipolar input architecture supports familiar feedback and compensation methods, although the selected noise-gain topology must remain stable with the intended source impedance and load. Check output swing, output-current demand, and supply headroom at the lowest rail voltage. Short feedback loops and a clean, decoupled supply help limit distortion and unintended oscillation in an active audio filter.

🖥️

Precision Test and Measurement Buffer

The MC34071PG can serve as a general-purpose buffer or gain stage in laboratory and test equipment where response speed matters more than ultimate precision. A gain-bandwidth product of 4.5 MHz and slew rate of 13 V/µs allow the amplifier to drive changing waveforms without the slow settling behavior expected from many low-offset devices. For instrumentation-grade measurement, however, the design engineer must still budget the amplifier's input offset, input bias current, and output errors against the required accuracy. The 3 V to 44 V operating range supports laboratory systems using several common supply voltages. Use short, guarded input paths, clean grounding, and stable reference components so the buffer does not degrade the accuracy of the source being measured.

🌐

Communications Interface Buffer

The MC34071PG is appropriate for communications equipment that requires a fast, single-ended buffer between a source and an active stage. Its 13 V/µs slew rate helps preserve signal transitions, and its 4.5 MHz gain-bandwidth product is suitable for many low-frequency control, monitor, and analog-interface paths. The wide 3 V to 44 V single-supply operation makes it useful in industrial communication systems with varied rail architectures. Designers should keep the amplifier stable with the source and load impedances, verify that the input common-mode range covers the full source swing, and provide local supply bypassing. When handling higher-speed or larger-swing signals, compare output-current demand and distortion against the completed circuit rather than relying on gain-bandwidth product alone.

⚡

Power Supply Feedback Control

The MC34071PG can be evaluated for error-amplifier or feedback functions in a regulated power-supply control loop where response speed and supply range are important. Its 4.5 MHz gain-bandwidth product and 13 V/µs slew rate allow relatively quick correction of moderate output disturbances, and the device accepts a 3 V to 44 V single supply for integration with higher-energy industrial rails. Its general-purpose bipolar construction makes it familiar in classic voltage-mode control architectures. The control-loop design must account for output saturation, common-mode limits, compensation, and the amplifier's interaction with switching-node noise. Use a dedicated voltage reference and carefully filtered feedback division. Confirm stability across the intended input, output, and load ranges before using the amplifier near a switching power stage.

🔧

Educational and Prototype Analog Circuit

The MC34071PG is practical for educational laboratories, breadboard prototypes, and repair platforms because it combines a familiar 8-pin PDIP package with a general-purpose 4.5 MHz gain-bandwidth product. The through-hole format makes the amplifier easy to insert and replace without fine-pitch rework equipment, while 13 V/µs slew rate allows demonstration of amplifier response, active filtering, and feedback behavior. The 3 V to 44 V operating range enables operation from common laboratory supplies as well as higher-voltage demonstrations when the instructor confirms the absolute maximum limits. Keep the lesson circuit within the input and output common-mode limits, use a stable bypass capacitor at the supply pin, and avoid connecting outputs together. For permanent production equipment, assess whether a surface-mount package would improve mechanical reliability.

What is the MC34071PG?
The MC34071PG is a single, general-purpose bipolar operational amplifier from onsemi. According to the manufacturer product page, it supports a 3 V to 44 V single-supply range, provides a 4.5 MHz gain-bandwidth product, and has a 13 V/µs slew rate. It is packaged in an 8-pin PDIP through-hole package for instrumentation, buffering, active filtering, and general analog signal-conditioning applications.
What is the operating voltage of MC34071PG?
The MC34071PG operates from 3 V to 44 V on a single supply. The onsemi MC34071 family page identifies the 3.0 V to 44 V single-supply operating range. When using dual supplies, verify the total supply span and the individual input and output voltage limits in the manufacturer electrical characteristics table before finalizing the circuit.
What is the gain bandwidth of MC34071PG?
The MC34071PG has a 4.5 MHz gain-bandwidth product. According to the onsemi MC34071 product page, this rating pairs with a 13 V/µs slew rate for responsive general-purpose amplification. Actual closed-loop bandwidth depends on the selected noise-gain topology, load impedance, feedback network, and the amplifier's stability characteristics.
Where can I download the MC34071PG datasheet PDF?
The MC34071PG datasheet is available through the onsemi MC34071 product page and through the linked MC34071PG datasheet records. Use the manufacturer document for authoritative pin descriptions, recommended operating conditions, electrical characteristics, and application guidance. The manufacturer product page identifies the device as a single-supply operational amplifier covering 3.0 V to 44 V.
Where is the MC34071PG pinout?
The MC34071PG uses an 8-pin PDIP outline and its complete pin assignment is shown in the manufacturer datasheet's pin-description table. Use that table when routing the differential inputs, output, supply pins, and offset-null or other option pins. The package is a standard 0.300-inch, 7.62 mm-pitch PDIP, but package shape alone does not determine the function of each terminal.
How fast is the MC34071PG slew rate?
The MC34071PG has a slew rate of 13 V/µs. onsemi lists that figure together with a 4.5 MHz gain-bandwidth product on the MC34071 family page. Slew rate limits how quickly the output can follow large voltage changes, so it is especially relevant to waveform generators, feedback loops, and signal paths requiring fast settling.
MC34071PG vs MC34071APG - which is the better replacement?
MC34071APG is the closest identified drop-in candidate for MC34071PG because it belongs to the same onsemi MC34071 family and uses the same 8-pin PDIP package. The MC34071 family is specified at 4.5 MHz gain-bandwidth product and 13 V/µs slew rate, while MC34071P and MC34071PG identify commercial-grade versions of the family. Confirm the exact temperature, offset, and lifecycle requirements before substitution.
What can replace MC34071PG?
MC34071APG is the most defensible drop-in replacement identified for MC34071PG because it shares the onsemi MC34071 family and PDIP-8 format. The devices should be checked against the specific grade, temperature range, offset voltage, bias current, output swing, and lifecycle requirements. A generic 8-pin op amp is not automatically interchangeable even when the package matches.
Can UA741CPE4 replace MC34071PG?
UA741CPE4 should not be treated as an automatic drop-in replacement for MC34071PG without a full pin and electrical comparison. Both are general-purpose 8-pin DIP amplifiers, but the MC34071PG is specified for a 4.5 MHz gain-bandwidth product and 13 V/µs slew rate, while the UA741 family's offset-null and electrical details must be checked independently. Confirm input bias current, offset, common-mode range, and supply compatibility.
Is MC34071PG suitable for instrumentation applications?
Yes, the MC34071PG is suitable for instrumentation and general analog signal conditioning. Its 4.5 MHz gain-bandwidth product and 13 V/µs slew rate support responsive amplification and buffering, while the 3 V to 44 V single-supply range provides flexibility across common supply rails. High-accuracy measurement designs should additionally verify offset voltage, input bias current, drift, and noise against the required measurement budget.
When should I choose MC34071PG over a precision op amp?
Choose MC34071PG when a fast, general-purpose amplifier is more valuable than very low offset or drift. The device provides 4.5 MHz gain-bandwidth product and 13 V/µs slew rate, making it appropriate for signal conditioning, buffering, and active filtering. Choose a precision amplifier instead when nanovolt-scale offset, low drift, very low input bias current, or exceptional linearity dominates the application requirements.
Where to buy MC34071PG online?
Use the Request a Quote form on this page to request MC34071PG availability, current commercial terms, and the quantity required. The MC34071PG is cataloged as an onsemi 8-pin PDIP operational amplifier in a tube package. Quote requests keep stock, lead-time, and commercial confirmation aligned with the exact MC34071PG ordering code and your assembly requirements.
What is the price of MC34071PG?
The current commercial price of MC34071PG should be obtained through the Request a Quote form on this page. Pricing can vary with order quantity, packaging, current inventory, and market conditions, so a static figure may not reflect the terms available for your order. The form allows the exact MPN and required quantity to be quoted without relying on a stale catalog amount.
What is the lead time for MC34071PG?
Request the current MC34071PG lead time and minimum order quantity through the Request a Quote form on this page. Lead time depends on current manufacturer and distribution availability, order quantity, and the requested tube packaging. The device is identified as onsemi's commercial-grade MC34071PG in an 8-pin PDIP package, so no unconfirmed availability period should be assumed.
Is MC34071PG in stock?
Current MC34071PG stock status is best confirmed through the Request a Quote form on this page. Enter the required quantity and project schedule so procurement can return a current availability commitment. The MC34071PG ordering code is available as an onsemi 8-pin PDIP general-purpose op amp, but inventory at any particular distributor is not a global stock guarantee.

Données de référence d'ingénierie pour MC34071PG — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose MC34071PG for a general-purpose through-hole op-amp design that benefits from a 3 V to 44 V single-supply range, 4.5 MHz gain-bandwidth product, and 13 V/µs slew rate. It is a practical fit for signal conditioning, active filtering, buffering, instrumentation prototypes, and education where the PDIP-8 format is desired. Choose MC34071APG or MC34071P when a same-family alternative can simplify procurement, but verify the exact suffix, temperature grade, offset bin, and lifecycle requirements. Consider UA741CPE4 only when its input bias current, offset, common-mode range, bandwidth, and output behavior are independently acceptable; its package match alone does not establish electrical equivalence. For very low offset, low drift, or exceptionally low input bias current, use a dedicated precision amplifier rather than this general-purpose bipolar part.

Comparaison avec les alternatives

Paramètre Ce produit MC34071APG MC34071P UA741CPE4
Package PDIP-8 PDIP-8 PDIP-8 PDIP-8
Brand onsemi onsemi onsemi Texas Instruments
Amplifier Type General-purpose single op amp General-purpose MC34071 family variant General-purpose MC34071 family variant General-purpose operational amplifier
Number of Circuits 1 1 1 1
Mounting Style Through-hole Through-hole Through-hole Through-hole

Principaux différenciateurs

  • Wide single-supply operating range (vs UA741CPE4)
  • Fast response for a general-purpose bipolar amplifier (vs MC34071P)
  • Closest same-family packaged alternative (vs MC34071APG)

Notes de conception

Operate the MC34071PG only within its specified 3 V to 44 V single-supply range and verify the absolute maximum supply ratings before energizing the circuit. Place a ceramic bypass capacitor close to the positive supply terminal and connect the negative supply terminal to the ground plane with a short path. For dual-supply operation, calculate the total voltage across the device and confirm that input and output voltages remain inside their permitted common-mode and output-swing limits.

Do not assume that the 4.5 MHz gain-bandwidth product is the usable closed-loop bandwidth at every gain. Stability also depends on noise gain, source impedance, load capacitance, and the feedback components. Check the manufacturer stability guidance before driving capacitive loads, and add an isolation resistor when the output must drive a long cable, connector, or large capacitor.

Keep the input, feedback, and output paths compact and route them away from noisy switching nodes and high-current return paths. Use a continuous ground plane, maintain a common reference between the signal source and the amplifier, and decouple supply pins locally. For instrumentation circuits, guard or shield high-impedance input traces because the bipolar input stage can draw bias current and may couple leakage into nearby nodes.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The MC34071PG is a commercial-grade general-purpose operational amplifier in an 8-pin PDIP package. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established from the available manufacturer and distributor records.

Recherches associées

MC34071PG datasheet MC34071PG pinout MC34071PG datasheet pdf MC34071PG specifications MC34071PG equivalent MC34071PG replacement MC34071PG cross reference MC34071PG vs MC34071APG MC34071PG price MC34071PG stock onsemi MC34071PG MC34071PG PDIP-8 pinout MC34071PG active filter

Composants & termes associés

onsemi MC34071PG MC34071 MC34071APG MC34071P UA741CPE4 operational amplifier op amp general-purpose amplifier analog amplifier signal-conditioning amplifier bipolar fabrication gain-bandwidth product slew rate input offset voltage input bias current common-mode input range single-ended input PDIP-8 through-hole package tube packaging industrial instrumentation active filter power-supply control
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ