MC34071PG - 44V Single Op Amp, 4.5MHz | onsemi
N.º de pieza: MC34071PG ✓ ActivoMC34071PG Descripción general
An operational amplifier, or op amp, is a voltage-controlled differential amplifier used to amplify or buffer signals in electronic systems. The MC34071 belongs to the broader hierarchy of operational amplifiers, analog amplifiers, and signal-chain semiconductors. Its wide supply range allows it to operate from conventional 5 V and 12 V rails as well as higher industrial voltage systems, although the complete circuit must remain within the device's absolute maximum ratings.
Key characteristics include a 4.5 MHz gain-bandwidth product, 13 V/µs slew rate, single-ended input configuration, and a general-purpose amplifier design. The manufacturer describes the MC34071 series as using quality bipolar fabrication and innovative design concepts. The bipolar approach supports conventional op-amp behavior and is useful in applications requiring signal amplification, buffering, active filtering, and general analog control functions.
The device's fast settling performance and 13 V/µs slew rate make it more responsive than slow precision-oriented amplifiers. This is beneficial for instrumentation and feedback loops that need to follow changing input waveforms. Designers should still account for input and output voltage limits, common-mode range, output-current capability, supply decoupling, and stability when driving capacitive or nonlinear loads.
Typical uses include industrial process-control instrumentation, sensor signal conditioning, audio and communications support circuits, active filters, voltage followers, and general laboratory measurement equipment. Because the MC34071PG is a through-hole PDIP device, it is especially convenient for prototyping, educational systems, repair work, and applications where socketed or manually soldered assembly is acceptable.
For reliable operation, decouple the supply pins close to the device and provide stable reference and feedback paths. Avoid forcing the output beyond its rated output-voltage swing, and check the input common-mode range over the complete operating range. Use the manufacturer pin description and electrical characteristics tables when assigning PCB nets and designing around input offset, bias current, supply current, and output-drive limits.
This product page combines manufacturer specifications, package information, design guidance, drop-in alternatives, and a parameter-by-parameter comparison to support faster component selection and PCB-level planning for MC34071PG-based analog circuits.
Alternativas directas para MC34071PG — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MC34071PG (mismo factor de forma y huella) — difiere en Mounting Type, Package.
MC34071APG
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MC34071P
✅ Sustitución directaConsulte el precio
Ver hoja de datos →UA741CPE4
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MC34071PG Valores máximos y características eléctricas
| Product Type | Single operational amplifier |
| Number of Circuits | 1 circuit |
| Amplifier Type | General-purpose |
| Single-Supply Voltage Range | 3.0 V to 44 V |
| Gain-Bandwidth Product | 4.5 MHz |
| Slew Rate | 13 V/µs |
| Input Configuration | Single-ended |
| Process Technology | Bipolar |
| Encapsulado | 8-pin PDIP (0.300 in, 7.62 mm pitch) |
| Package Type | PDIP-8 |
| Tipo de montaje | Through-hole |
| Packaging | Tube |
| Temperature Grade | Commercial |
| Terminal Count | 8 terminals |
| AEC-Q100 Qualification | Not applicable |
Guía de configuración de pines de MC34071PG pdip-8
Configuración de pines para MC34071PG (encapsulado pdip-8). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.
No hay datos detallados de patillaje disponibles para MC34071PG.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MC34071PG es adecuado para 6 aplicacións: Industrial Sensor Signal Conditioning, Active Audio Filter, Precision Test and Measurement Buffer, Communications Interface Buffer, Power Supply Feedback Control, Educational and Prototype Analog Circuit.
Industrial Sensor Signal Conditioning
The MC34071PG fits industrial sensor front ends that need a fast general-purpose amplifier stage between a transducer and a measurement or control circuit. Its 4.5 MHz gain-bandwidth product provides more bandwidth than a slow precision-only amplifier, while 13 V/µs slew rate helps the output follow rapidly changing sensor signals. The 3 V to 44 V single-supply range also supports a broad range of industrial rail conditions. Because the MC34071PG uses a bipolar input stage, the design should include offset-voltage, bias-current, and common-mode checks against the sensor output. Place power-bypass capacitors near the device, keep feedback traces short, and verify the sensor's full output range before choosing the gain and reference network.
Recomendado
Active Audio Filter
The MC34071PG is suitable for active filtering in audio and communications equipment where a conventional general-purpose op amp with moderate speed is sufficient. Its 4.5 MHz gain-bandwidth product and 13 V/µs slew rate provide ample response for many low- and mid-frequency audio stages, while the single 3 V to 44 V supply simplifies integration with varied rails. The bipolar input architecture supports familiar feedback and compensation methods, although the selected noise-gain topology must remain stable with the intended source impedance and load. Check output swing, output-current demand, and supply headroom at the lowest rail voltage. Short feedback loops and a clean, decoupled supply help limit distortion and unintended oscillation in an active audio filter.
Recomendado
Precision Test and Measurement Buffer
The MC34071PG can serve as a general-purpose buffer or gain stage in laboratory and test equipment where response speed matters more than ultimate precision. A gain-bandwidth product of 4.5 MHz and slew rate of 13 V/µs allow the amplifier to drive changing waveforms without the slow settling behavior expected from many low-offset devices. For instrumentation-grade measurement, however, the design engineer must still budget the amplifier's input offset, input bias current, and output errors against the required accuracy. The 3 V to 44 V operating range supports laboratory systems using several common supply voltages. Use short, guarded input paths, clean grounding, and stable reference components so the buffer does not degrade the accuracy of the source being measured.
Recomendado
Communications Interface Buffer
The MC34071PG is appropriate for communications equipment that requires a fast, single-ended buffer between a source and an active stage. Its 13 V/µs slew rate helps preserve signal transitions, and its 4.5 MHz gain-bandwidth product is suitable for many low-frequency control, monitor, and analog-interface paths. The wide 3 V to 44 V single-supply operation makes it useful in industrial communication systems with varied rail architectures. Designers should keep the amplifier stable with the source and load impedances, verify that the input common-mode range covers the full source swing, and provide local supply bypassing. When handling higher-speed or larger-swing signals, compare output-current demand and distortion against the completed circuit rather than relying on gain-bandwidth product alone.
Recomendado
Power Supply Feedback Control
The MC34071PG can be evaluated for error-amplifier or feedback functions in a regulated power-supply control loop where response speed and supply range are important. Its 4.5 MHz gain-bandwidth product and 13 V/µs slew rate allow relatively quick correction of moderate output disturbances, and the device accepts a 3 V to 44 V single supply for integration with higher-energy industrial rails. Its general-purpose bipolar construction makes it familiar in classic voltage-mode control architectures. The control-loop design must account for output saturation, common-mode limits, compensation, and the amplifier's interaction with switching-node noise. Use a dedicated voltage reference and carefully filtered feedback division. Confirm stability across the intended input, output, and load ranges before using the amplifier near a switching power stage.
Recomendado
Educational and Prototype Analog Circuit
The MC34071PG is practical for educational laboratories, breadboard prototypes, and repair platforms because it combines a familiar 8-pin PDIP package with a general-purpose 4.5 MHz gain-bandwidth product. The through-hole format makes the amplifier easy to insert and replace without fine-pitch rework equipment, while 13 V/µs slew rate allows demonstration of amplifier response, active filtering, and feedback behavior. The 3 V to 44 V operating range enables operation from common laboratory supplies as well as higher-voltage demonstrations when the instructor confirms the absolute maximum limits. Keep the lesson circuit within the input and output common-mode limits, use a stable bypass capacitor at the supply pin, and avoid connecting outputs together. For permanent production equipment, assess whether a surface-mount package would improve mechanical reliability.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MC34071PG — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MC34071APG | MC34071P | UA741CPE4 |
|---|---|---|---|---|
| Package | PDIP-8 | PDIP-8 | PDIP-8 | PDIP-8 |
| Brand | onsemi | onsemi | onsemi | Texas Instruments |
| Amplifier Type | General-purpose single op amp | General-purpose MC34071 family variant | General-purpose MC34071 family variant | General-purpose operational amplifier |
| Number of Circuits | 1 | 1 | 1 | 1 |
| Mounting Style | Through-hole | Through-hole | Through-hole | Through-hole |
Diferenciadores clave
- Wide single-supply operating range (frente a UA741CPE4)
- Fast response for a general-purpose bipolar amplifier (frente a MC34071P)
- Closest same-family packaged alternative (frente a MC34071APG)
Notas de diseño
Operate the MC34071PG only within its specified 3 V to 44 V single-supply range and verify the absolute maximum supply ratings before energizing the circuit. Place a ceramic bypass capacitor close to the positive supply terminal and connect the negative supply terminal to the ground plane with a short path. For dual-supply operation, calculate the total voltage across the device and confirm that input and output voltages remain inside their permitted common-mode and output-swing limits.
Do not assume that the 4.5 MHz gain-bandwidth product is the usable closed-loop bandwidth at every gain. Stability also depends on noise gain, source impedance, load capacitance, and the feedback components. Check the manufacturer stability guidance before driving capacitive loads, and add an isolation resistor when the output must drive a long cable, connector, or large capacitor.
Keep the input, feedback, and output paths compact and route them away from noisy switching nodes and high-current return paths. Use a continuous ground plane, maintain a common reference between the signal source and the amplifier, and decouple supply pins locally. For instrumentation circuits, guard or shield high-impedance input traces because the bipolar input stage can draw bias current and may couple leakage into nearby nodes.
Información de cumplimiento
The MC34071PG is a commercial-grade general-purpose operational amplifier in an 8-pin PDIP package. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established from the available manufacturer and distributor records.