MC908AP16CFBE - HC08 8-Bit MCU 16KB Flash 8MHz 44-QFP | NXP
Référence : MC908AP16CFBE ⚠ Dernier achat| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $20.32 | $20,32 |
| 10 | $18.1 | $181,00 |
| 100 | $16.28 | $1 628,00 |
| 500 | $14.95 | $7 475,00 |
| 1 000 | $13.6 | $13 600,00 |
MC908AP16CFBE Présentation
A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, peripherals, and I/O. Within the embedded-systems hierarchy, an MCU is a type of integrated circuit (semiconductor -> IC -> microcontroller). The 8-bit MCU category traditionally trades peak performance for low cost, deterministic interrupt behavior, and ultra-low static power dissipation, making it suitable for cost-sensitive industrial, appliance, and automotive body applications where higher-bit parts are unnecessary.
Key features of the MC908AP16CFBE include its 8MHz CPU clock, 16KB Flash program memory, 32 GPIO pins, multi-protocol serial communication (SCI, IRSCI, I²C, SPI), and a 10-bit ADC. The HC08APxA series represents the high-speed oscillator version of the HC08APx family, providing an external crystal/oscillator option for time-sensitive designs. The 44-QFP package is a plastic quad flat pack measuring 10x10mm with gull-wing leads suited for reflow soldering and moderate-density PCB designs.
Technically, the CPU08 core uses an enhanced HC05 instruction set with new instructions for improved code density, stack pointer paging for high-level language support, and a 16-bit index register. Memory mapping is linear with 16KB of Flash accessible to the CPU and direct page addressing for fast variable access, while the peripheral modules are mapped into the upper address space.
Typical applications include industrial control systems, appliance motor control, automotive body electronics, security and alarm panels, HVAC controllers, and remote-keyless entry receivers. The wide operating voltage (3.3V/5V) and rich peripheral set make this MCU particularly attractive for replacing legacy HC05 designs with code-compatible enhancements.
When designing with this part, verify the exact ADC channel count and timer configuration against the latest NXP datasheet revision before committing to layout. The 44-QFP footprint requires careful land-pattern design and reflow profile control for production yields.
Alternatives de remplacement direct pour MC908AP16CFBE — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MC908AP16CFBE (même facteur de forme et même empreinte) — différant par Package, ADC, Family, Core, Supply Voltage.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MC908AP32CFBE
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →MC908AP64CFAER528
✅ Remplacement direct✓ En stock
$4.85 / unité
Voir la fiche technique →MC908AP8CFBE
✅ Remplacement direct✓ En stock
$4.95 / unité
Voir la fiche technique →MC908AP16ACFBE
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
S9S08AW60E5MFGE
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$6.05 / unité
Voir la fiche technique →MC908AZ32AVFUE
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$9.85 / unité
Voir la fiche technique →MC908AP16CFBE Valeurs maximales et caractéristiques électriques
| Core | M68HC08 CPU08 (8-bit) |
| Program Memory | 16 KB Flash (16K x 8) |
| Maximum CPU Frequency | 8 MHz |
| Operating Voltage | 3.3 V / 5 V |
| Number of I/O | 32 |
| ADC | 10-bit |
| Connectivity | I²C, IRSCI, SCI, SPI |
| Peripherals | LED, LVD, POR, PWM |
| Boîtier | 44-QFP (10x10 mm) |
| Type de montage | Surface Mount |
| Series | HC08AP (high-speed oscillator version) |
| Program Memory Type | FLASH |
| Lead-Free | Yes |
| Statut RoHS | Compliant |
| Data Converters | A/D 10-bit |
Configuration des broches de MC908AP16CFBE
| Broche 1 | PTD0/TxD — GPIO / SCI Transmit |
| Broche 2 | PTD1/RxD — GPIO / SCI Receive |
| Broche 3 | PTD2 — GPIO |
| Broche 4 | PTD3 — GPIO |
| Broche 5 | VDD — Power supply (3.3V/5V) |
| Broche 6 | VSS — Ground |
| Broche 7 | PTD4 — GPIO |
| Broche 8 | PTD5 — GPIO |
| Broche 9 | PTD6 — GPIO |
| Broche 10 | PTD7 — GPIO |
| Broche 11 | PTA0 — GPIO / ADC channel |
| Broche 12 | PTA1 — GPIO / ADC channel |
| Broche 13 | PTA2 — GPIO / ADC channel |
| Broche 14 | PTA3 — GPIO / ADC channel |
| Broche 15 | PTA4 — GPIO / ADC channel |
| Broche 16 | PTA5 — GPIO / ADC channel |
| Broche 17 | PTA6 — GPIO / ADC channel |
| Broche 18 | PTA7 — GPIO / ADC channel |
| Broche 19 | PTB0 — GPIO |
| Broche 20 | PTB1 — GPIO |
| Broche 21 | PTB2 — GPIO |
| Broche 22 | PTB3 — GPIO |
| Broche 23 | PTB4 — GPIO |
| Broche 24 | PTB5 — GPIO |
| Broche 25 | PTB6 — GPIO |
| Broche 26 | PTB7 — GPIO |
| Broche 27 | PTC0 — GPIO / PWM channel |
| Broche 28 | PTC1 — GPIO / PWM channel |
| Broche 29 | PTC2 — GPIO / PWM channel |
| Broche 30 | PTC3 — GPIO / PWM channel |
| Broche 31 | PTC4 — GPIO / SPI |
| Broche 32 | PTC5 — GPIO / SPI |
| Broche 33 | PTC6 — GPIO / SCL |
| Broche 34 | PTC7 — GPIO / SDA |
| Broche 35 | OSC1 — Crystal oscillator input |
| Broche 36 | OSC2 — Crystal oscillator output |
| Broche 37 | VDD — Power supply |
| Broche 38 | VSS — Ground |
| Broche 39 | RST — Reset input (active low) |
| Broche 40 | IRQ — External interrupt request |
| Broche 41 | BKGD — Background debug mode |
| Broche 42 | VPP — Flash programming voltage |
| Broche 43 | VDD — Power supply |
| Broche 44 | VSS — Ground |
Applications typiques
MC908AP16CFBE convient pour 6 applications: Industrial Control Systems, Appliance Motor Control, Security and Alarm Panels, HVAC Temperature Controllers, Remote Keyless Entry (RKE) Receivers, Consumer Electronics Controllers.
Industrial Control Systems
The MC908AP16CFBE's 16KB Flash, 8MHz CPU08 core, and dual 3.3V/5V supply tolerance suit industrial PLCs, sensor interfaces, and factory automation modules. Its 32 GPIO and 10-bit ADC handle multiple analog sensor inputs (temperature, pressure, flow) plus digital I/O for relays and indicators. The on-chip PWM, LVD, and POR peripherals reduce external component count, while SCI/SPI/I²C enable comms with industrial HMI displays and upstream controllers. Robust QFP package and wide operating voltage simplify integration into 24V-derived rails.
Recommandé
Appliance Motor Control
The MC908AP16CFBE is well-matched to appliance motor control in washing machines, dishwashers, and small HVAC fans. The PWM modules drive TRIAC or MOSFET gate signals for variable-speed universal and BLDC motors, while the 10-bit ADC samples back-EMF and current-sense feedback for closed-loop control. The 16KB Flash accommodates state-machine and lookup-table code for motor commutation. Industrial-grade QFP package withstands the thermal cycling and vibration of appliance environments.
Recommandé
Security and Alarm Panels
The MC908AP16CFBE's low-power HC08 core and rich serial peripherals suit security alarm panels and access-control systems. SCI/SPI interfaces drive keypads, RFID readers, and GSM/PSTN modems; the 32 GPIO scan multiple zone inputs and drive siren/relay outputs. Flash memory stores configuration and event logs; LVD/POR protect against brown-out during backup-battery switchover. Dual-voltage operation simplifies interface to legacy 5V sensors and modern 3.3V wireless modules.
Recommandé
HVAC Temperature Controllers
The MC908AP16CFBE handles HVAC thermostat and zone-controller duties with its 10-bit ADC reading thermistor or RTD temperature sensors, PWM outputs driving damper/stepper valves, and I²C interface to CO2/humidity sensors. The 16KB Flash supports scheduling logic and adaptive-control algorithms. Wide 3.3V-5V supply tolerance simplifies direct connection to 24VAC-derived DC rails after rectification, and the industrial QFP package survives long-term thermal stress behind wall plates.
Recommandé
Remote Keyless Entry (RKE) Receivers
The MC908AP16CFBE is suited for fixed-location RKE receivers in automotive aftermarket and gate-opener applications. Its IRSCI/SPI interfaces connect to 315/433MHz RF receiver ICs and rolling-code decoders, while GPIO drives relay outputs for door/lock actuators. The 8MHz CPU decodes Manchester or PWM-encoded keyfob transmissions in real time. Note: this part is not AEC-Q100 qualified - for OEM automotive use, migrate to S12 automotive MCUs.
Recommandé
Consumer Electronics Controllers
The MC908AP16CFBE serves as a cost-effective main controller in consumer devices such as coffee makers, microwaves, washing-machine HMIs, and small home appliances. Its dual 3.3V/5V supply, 32 GPIO for key/LED matrix scanning, and PWM for buzzer or LED dimming provide the full feature set in a single chip. The 16KB Flash holds product firmware plus factory calibration data; SCI enables firmware updates via UART bootloader for field serviceability.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MC908AP16CFBE — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MC908AP32CFBE | MC908AP64CFAE | MC908AP8CFBE | MC908AP16ACFBE |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 44-QFP (10x10) | 44-QFP (10x10) - same | 44-QFP - same family | 44-QFP (10x10) - same | 44-QFP (10x10) - same |
| Flash Memory | 16 KB | 32 KB (+100%) | 64 KB (+300%) | 8 KB (-50%) | 16 KB (same) |
| CPU Frequency | 8 MHz | 8 MHz | 8 MHz | 8 MHz | 8 MHz |
| Core | CPU08 (HC08) | CPU08 (HC08) | CPU08 (HC08) | CPU08 (HC08) | CPU08 (HC08) |
| GPIO Count | 32 | 32 | 32 | 32 | 32 |
| ADC | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit |
| Connectivity | I²C, IRSCI, SCI, SPI | I²C, IRSCI, SCI, SPI | I²C, IRSCI, SCI, SPI | I²C, IRSCI, SCI, SPI | I²C, IRSCI, SCI, SPI |
| Operating Voltage | 3.3V / 5V | 3.3V / 5V | 3.3V / 5V | 3.3V / 5V | 3.3V / 5V |
| Lifecycle Status | Last Time Buy / NRND | Not For New Designs | Not For New Designs | Not For New Designs | Not For New Designs |
Principaux différenciateurs
- Dual 3.3V/5V supply operation (vs MC908AP8CFBE)
- Mid-density 16KB Flash sweet spot (vs MC908AP64CFAE)
- High-speed oscillator variant (vs MC908AP16ACFBE)
Notes de conception
Decouple VDD/VSS pairs (multiple pins on this QFP) with 100nF ceramic capacitors placed within 5mm of each supply pin, plus a bulk 10uF tantalum or aluminum on the main rail. Place the 100nF caps on the same layer as the IC with short, wide traces to the pins. For noisy industrial environments, add a ferrite bead in series with the supply. Enable the on-chip POR and LVD modules in software to ensure predictable startup at low VDD.
Route the 44-QFP land pattern with 0.8mm pitch - minimum trace width 0.15mm with 0.15mm clearance. Place all 4 VDD pins (5, 37, 43) and VSS pins (6, 38, 44) on internal power planes stitched with multiple vias. Avoid running high-speed digital signals under the package; keep the QFP footprint area free of vias to prevent solder joint defects during reflow. Follow JEDEC J-STD-020 MSL handling for the surface-mount package.
Do not assume 16KB Flash is fully available for application code - the bootloader, interrupt vectors, and Flash security/lock bytes consume 1-3KB. Verify Flash endurance (typically 10K cycles) and retention (10 years) against your firmware update strategy. The RST pin is bidirectional - an external reset supervisor IC is recommended if the system experiences slow VDD rise times. Always check NXP errata documents for the specific mask set revision before finalizing firmware.
Informations de conformité
RoHS compliant per NXP product page. Not AEC-Q100 qualified - automotive designs must migrate to AEC-Q100 S12 family. Marked 'End of Life' / 'Not For New Designs' on NXP product page.