MC908AP16CFBE - HC08 8-Bit MCU 16KB Flash 8MHz 44-QFP | NXP
部品番号: MC908AP16CFBE ⚠ ラストタイムバイ| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $20.32 | $20.32 |
| 10 | $18.1 | $181.00 |
| 100 | $16.28 | $1,628.00 |
| 500 | $14.95 | $7,475.00 |
| 1,000 | $13.6 | $13,600.00 |
MC908AP16CFBE 概要
A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, peripherals, and I/O. Within the embedded-systems hierarchy, an MCU is a type of integrated circuit (semiconductor -> IC -> microcontroller). The 8-bit MCU category traditionally trades peak performance for low cost, deterministic interrupt behavior, and ultra-low static power dissipation, making it suitable for cost-sensitive industrial, appliance, and automotive body applications where higher-bit parts are unnecessary.
Key features of the MC908AP16CFBE include its 8MHz CPU clock, 16KB Flash program memory, 32 GPIO pins, multi-protocol serial communication (SCI, IRSCI, I²C, SPI), and a 10-bit ADC. The HC08APxA series represents the high-speed oscillator version of the HC08APx family, providing an external crystal/oscillator option for time-sensitive designs. The 44-QFP package is a plastic quad flat pack measuring 10x10mm with gull-wing leads suited for reflow soldering and moderate-density PCB designs.
Technically, the CPU08 core uses an enhanced HC05 instruction set with new instructions for improved code density, stack pointer paging for high-level language support, and a 16-bit index register. Memory mapping is linear with 16KB of Flash accessible to the CPU and direct page addressing for fast variable access, while the peripheral modules are mapped into the upper address space.
Typical applications include industrial control systems, appliance motor control, automotive body electronics, security and alarm panels, HVAC controllers, and remote-keyless entry receivers. The wide operating voltage (3.3V/5V) and rich peripheral set make this MCU particularly attractive for replacing legacy HC05 designs with code-compatible enhancements.
When designing with this part, verify the exact ADC channel count and timer configuration against the latest NXP datasheet revision before committing to layout. The 44-QFP footprint requires careful land-pattern design and reflow profile control for production yields.
ドロップイン代替品: MC908AP16CFBE — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC908AP16CFBE （同一形状・フットプリント） — 相違点: Package, Supply Voltage, ADC, Family, Program Memory Size.
クイック比較ツール — 並列比較する代替部品を選択:
MC908AP32CFBE
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →MC908AP64CFAER528
✅ ドロップイン✓ 在庫あり
$4.85 / 個
データシートを見る →MC908AP8CFBE
✅ ドロップイン✓ 在庫あり
$4.95 / 個
データシートを見る →MC908AP16ACFBE
✅ ドロップイン📋 参考代替品（カタログ未掲載）
S9S08AW60E5MFGE
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$6.05 / 個
データシートを見る →MC908AZ32AVFUE
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$9.85 / 個
データシートを見る →MC908AP16CFBE 最大定格＆電気的特性
| Core | M68HC08 CPU08 (8-bit) |
| Program Memory | 16 KB Flash (16K x 8) |
| Maximum CPU Frequency | 8 MHz |
| Operating Voltage | 3.3 V / 5 V |
| Number of I/O | 32 |
| ADC | 10-bit |
| Connectivity | I²C, IRSCI, SCI, SPI |
| Peripherals | LED, LVD, POR, PWM |
| パッケージ | 44-QFP (10x10 mm) |
| 実装タイプ | Surface Mount |
| Series | HC08AP (high-speed oscillator version) |
| Program Memory Type | FLASH |
| Lead-Free | Yes |
| RoHS ステータス | Compliant |
| Data Converters | A/D 10-bit |
MC908AP16CFBE ピン構成
| ピン 1 | PTD0/TxD — GPIO / SCI Transmit |
| ピン 2 | PTD1/RxD — GPIO / SCI Receive |
| ピン 3 | PTD2 — GPIO |
| ピン 4 | PTD3 — GPIO |
| ピン 5 | VDD — Power supply (3.3V/5V) |
| ピン 6 | VSS — Ground |
| ピン 7 | PTD4 — GPIO |
| ピン 8 | PTD5 — GPIO |
| ピン 9 | PTD6 — GPIO |
| ピン 10 | PTD7 — GPIO |
| ピン 11 | PTA0 — GPIO / ADC channel |
| ピン 12 | PTA1 — GPIO / ADC channel |
| ピン 13 | PTA2 — GPIO / ADC channel |
| ピン 14 | PTA3 — GPIO / ADC channel |
| ピン 15 | PTA4 — GPIO / ADC channel |
| ピン 16 | PTA5 — GPIO / ADC channel |
| ピン 17 | PTA6 — GPIO / ADC channel |
| ピン 18 | PTA7 — GPIO / ADC channel |
| ピン 19 | PTB0 — GPIO |
| ピン 20 | PTB1 — GPIO |
| ピン 21 | PTB2 — GPIO |
| ピン 22 | PTB3 — GPIO |
| ピン 23 | PTB4 — GPIO |
| ピン 24 | PTB5 — GPIO |
| ピン 25 | PTB6 — GPIO |
| ピン 26 | PTB7 — GPIO |
| ピン 27 | PTC0 — GPIO / PWM channel |
| ピン 28 | PTC1 — GPIO / PWM channel |
| ピン 29 | PTC2 — GPIO / PWM channel |
| ピン 30 | PTC3 — GPIO / PWM channel |
| ピン 31 | PTC4 — GPIO / SPI |
| ピン 32 | PTC5 — GPIO / SPI |
| ピン 33 | PTC6 — GPIO / SCL |
| ピン 34 | PTC7 — GPIO / SDA |
| ピン 35 | OSC1 — Crystal oscillator input |
| ピン 36 | OSC2 — Crystal oscillator output |
| ピン 37 | VDD — Power supply |
| ピン 38 | VSS — Ground |
| ピン 39 | RST — Reset input (active low) |
| ピン 40 | IRQ — External interrupt request |
| ピン 41 | BKGD — Background debug mode |
| ピン 42 | VPP — Flash programming voltage |
| ピン 43 | VDD — Power supply |
| ピン 44 | VSS — Ground |
主な用途
MC908AP16CFBE の用途: 6 件s: Industrial Control Systems, Appliance Motor Control, Security and Alarm Panels, HVAC Temperature Controllers, Remote Keyless Entry (RKE) Receivers, Consumer Electronics Controllers.
Industrial Control Systems
The MC908AP16CFBE's 16KB Flash, 8MHz CPU08 core, and dual 3.3V/5V supply tolerance suit industrial PLCs, sensor interfaces, and factory automation modules. Its 32 GPIO and 10-bit ADC handle multiple analog sensor inputs (temperature, pressure, flow) plus digital I/O for relays and indicators. The on-chip PWM, LVD, and POR peripherals reduce external component count, while SCI/SPI/I²C enable comms with industrial HMI displays and upstream controllers. Robust QFP package and wide operating voltage simplify integration into 24V-derived rails.
おすすめ
Appliance Motor Control
The MC908AP16CFBE is well-matched to appliance motor control in washing machines, dishwashers, and small HVAC fans. The PWM modules drive TRIAC or MOSFET gate signals for variable-speed universal and BLDC motors, while the 10-bit ADC samples back-EMF and current-sense feedback for closed-loop control. The 16KB Flash accommodates state-machine and lookup-table code for motor commutation. Industrial-grade QFP package withstands the thermal cycling and vibration of appliance environments.
おすすめ
Security and Alarm Panels
The MC908AP16CFBE's low-power HC08 core and rich serial peripherals suit security alarm panels and access-control systems. SCI/SPI interfaces drive keypads, RFID readers, and GSM/PSTN modems; the 32 GPIO scan multiple zone inputs and drive siren/relay outputs. Flash memory stores configuration and event logs; LVD/POR protect against brown-out during backup-battery switchover. Dual-voltage operation simplifies interface to legacy 5V sensors and modern 3.3V wireless modules.
おすすめ
HVAC Temperature Controllers
The MC908AP16CFBE handles HVAC thermostat and zone-controller duties with its 10-bit ADC reading thermistor or RTD temperature sensors, PWM outputs driving damper/stepper valves, and I²C interface to CO2/humidity sensors. The 16KB Flash supports scheduling logic and adaptive-control algorithms. Wide 3.3V-5V supply tolerance simplifies direct connection to 24VAC-derived DC rails after rectification, and the industrial QFP package survives long-term thermal stress behind wall plates.
おすすめ
Remote Keyless Entry (RKE) Receivers
The MC908AP16CFBE is suited for fixed-location RKE receivers in automotive aftermarket and gate-opener applications. Its IRSCI/SPI interfaces connect to 315/433MHz RF receiver ICs and rolling-code decoders, while GPIO drives relay outputs for door/lock actuators. The 8MHz CPU decodes Manchester or PWM-encoded keyfob transmissions in real time. Note: this part is not AEC-Q100 qualified - for OEM automotive use, migrate to S12 automotive MCUs.
おすすめ
Consumer Electronics Controllers
The MC908AP16CFBE serves as a cost-effective main controller in consumer devices such as coffee makers, microwaves, washing-machine HMIs, and small home appliances. Its dual 3.3V/5V supply, 32 GPIO for key/LED matrix scanning, and PWM for buzzer or LED dimming provide the full feature set in a single chip. The 16KB Flash holds product firmware plus factory calibration data; SCI enables firmware updates via UART bootloader for field serviceability.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC908AP16CFBE — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC908AP32CFBE | MC908AP64CFAE | MC908AP8CFBE | MC908AP16ACFBE |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 44-QFP (10x10) | 44-QFP (10x10) - same | 44-QFP - same family | 44-QFP (10x10) - same | 44-QFP (10x10) - same |
| Flash Memory | 16 KB | 32 KB (+100%) | 64 KB (+300%) | 8 KB (-50%) | 16 KB (same) |
| CPU Frequency | 8 MHz | 8 MHz | 8 MHz | 8 MHz | 8 MHz |
| Core | CPU08 (HC08) | CPU08 (HC08) | CPU08 (HC08) | CPU08 (HC08) | CPU08 (HC08) |
| GPIO Count | 32 | 32 | 32 | 32 | 32 |
| ADC | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit |
| Connectivity | I²C, IRSCI, SCI, SPI | I²C, IRSCI, SCI, SPI | I²C, IRSCI, SCI, SPI | I²C, IRSCI, SCI, SPI | I²C, IRSCI, SCI, SPI |
| Operating Voltage | 3.3V / 5V | 3.3V / 5V | 3.3V / 5V | 3.3V / 5V | 3.3V / 5V |
| Lifecycle Status | Last Time Buy / NRND | Not For New Designs | Not For New Designs | Not For New Designs | Not For New Designs |
主な差別化要因
- Dual 3.3V/5V supply operation （vs MC908AP8CFBE)
- Mid-density 16KB Flash sweet spot （vs MC908AP64CFAE)
- High-speed oscillator variant （vs MC908AP16ACFBE)
設計ノート
Decouple VDD/VSS pairs (multiple pins on this QFP) with 100nF ceramic capacitors placed within 5mm of each supply pin, plus a bulk 10uF tantalum or aluminum on the main rail. Place the 100nF caps on the same layer as the IC with short, wide traces to the pins. For noisy industrial environments, add a ferrite bead in series with the supply. Enable the on-chip POR and LVD modules in software to ensure predictable startup at low VDD.
Route the 44-QFP land pattern with 0.8mm pitch - minimum trace width 0.15mm with 0.15mm clearance. Place all 4 VDD pins (5, 37, 43) and VSS pins (6, 38, 44) on internal power planes stitched with multiple vias. Avoid running high-speed digital signals under the package; keep the QFP footprint area free of vias to prevent solder joint defects during reflow. Follow JEDEC J-STD-020 MSL handling for the surface-mount package.
Do not assume 16KB Flash is fully available for application code - the bootloader, interrupt vectors, and Flash security/lock bytes consume 1-3KB. Verify Flash endurance (typically 10K cycles) and retention (10 years) against your firmware update strategy. The RST pin is bidirectional - an external reset supervisor IC is recommended if the system experiences slow VDD rise times. Always check NXP errata documents for the specific mask set revision before finalizing firmware.
コンプライアンス情報
RoHS compliant per NXP product page. Not AEC-Q100 qualified - automotive designs must migrate to AEC-Q100 S12 family. Marked 'End of Life' / 'Not For New Designs' on NXP product page.