MC9S08EL32CTL - 40MHz 32KB 8-Bit MCU | NXP
Référence : MC9S08EL32CTL ✗ Fin de vieMC9S08EL32CTL Présentation
An HCS08 microcontroller is an embedded-control semiconductor combining a CPU core, program and data memory, peripheral interfaces, and general-purpose I/O in one package. The MC9S08EL32 belongs to the S08EL family, a cost-sensitive 8-bit MCU platform intended for automotive, industrial, consumer, and LIN-connected products. Its LIN controller, also called the Slave LIN Interface Controller or SLIC, is particularly useful in distributed systems where a microcontroller communicates with a vehicle or equipment LIN network.
The combination of 32 KB flash, 1 KB RAM, and 512 bytes of EEPROM provides enough memory for compact embedded control programs without an external memory device. Flash supports in-system programming, while EEPROM preserves calibration, configuration, or serial-number data when power is removed. The 40 MHz maximum clock rate supports responsive control loops and communication handling across the S08 peripheral set.
The MC9S08EL32CTL integrates serial interfaces for I²C, LIN, SCI, and SPI communication. It also provides analog-to-digital conversion, PWM generation, a watchdog timer, low-voltage detection, and power-on reset. These resources allow a compact control design to combine sensor acquisition, actuator timing, and network communication without requiring several separate interface ICs.
Typical uses include LIN slave nodes, automotive body and comfort modules, appliance controls, industrial interface controllers, sensor hubs, and compact motor-control systems. In a LIN design, the dedicated SLIC reduces firmware and external-interface overhead compared with implementing the LIN physical layer separately. The device can also serve as a general-purpose embedded controller when designers need a deterministic 8-bit platform with moderate flash capacity.
PCB design should preserve the 28-pin TSSOP footprint and route the power, ground, reset, clock, and communication pins according to the NXP pin-description table. Decoupling must be placed close to the supply pins, while exposed programming and debug functions should be brought out when production testing or field updates are required. Because the device is marked NRND, new designs should verify roadmap availability before committing to the MCU.
This product record combines the manufacturer's device specifications, lifecycle status, interface capabilities, package details, and practical design guidance. It also distinguishes genuine drop-in candidates from electrically similar parts that lack the original MCU's LIN controller or EEPROM resources, helping engineers evaluate PCB reuse without relying on headline clock-speed comparisons alone.
Alternatives de remplacement direct pour MC9S08EL32CTL — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MC9S08EL32CTL (même facteur de forme et même empreinte) — différant par Package.
MC9S08EL32MTL
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
S9S08SG32E1MTL
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC9S08EL32CTL Valeurs maximales et caractéristiques électriques
| CPU Architecture | 8-bit HCS08 core |
| Fréquence d'horloge maximale | 40 MHz |
| Program Memory Size | 32 KB flash |
| Program Memory Organization | 32K x 8 bits |
| RAM Size | 1 KB |
| EEPROM Size | 512 x 8 bits |
| Number of I/O Pins | 22 |
| Boîtier | 28-pin TSSOP |
| Type de montage | Surface mount |
| Serial Interfaces | I²C, LIN bus, SCI, and SPI |
| Analog Peripheral | ADC |
| Pulse-Width Modulation | PWM |
| Watchdog Timer | WDT |
| Voltage Supervision | LVD and POR |
Guide de configuration des broches du MC9S08EL32CTL 28-pin tssop
Configuration des broches du MC9S08EL32CTL (boîtier 28-pin tssop). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour MC9S08EL32CTL.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MC9S08EL32CTL convient pour 6 applications: LIN Slave Node, Automotive Body Control Module, Industrial Sensor Hub, Appliance Control Board, Compact Motor Controller, Consumer Device Controller.
LIN Slave Node
The MC9S08EL32CTL fits a LIN slave node because the S08EL family integrates the Slave LIN Interface Controller with a 40 MHz 8-bit core. A design can use the dedicated LIN hardware for network communication while the 22 I/O lines handle sensors, switches, and discrete outputs. The 32 KB flash and 1 KB RAM are sufficient for compact protocol and control firmware, while 512 bytes of EEPROM can retain configuration or calibration values. Engineers should budget the external LIN physical-layer components separately and verify timing, transceiver connection, and wake-up behavior against the device's reference configuration.
Recommandé
Automotive Body Control Module
The MC9S08EL32CTL supports compact automotive body-control tasks where an 8-bit CPU, 32 KB flash, and 22 I/O lines are sufficient. It can supervise switches, read analog sensors through the ADC, drive PWM outputs, and communicate over LIN, SCI, SPI, or I²C. Its 40 MHz clock rate allows responsive handling of several periodic tasks without moving routine logic into a higher-cost processor. The integrated EEPROM is useful for retaining node settings, while watchdog, low-voltage detection, and power-on reset functions help organize a dependable control design for vehicle environment and production-test requirements.
Recommandé
Industrial Sensor Hub
The MC9S08EL32CTL is well suited to a small industrial sensor hub that must collect measurements and forward them over a serial network. The ADC handles analog sensor inputs, PWM supports actuator or signaling functions, and the integrated I²C, SPI, SCI, and LIN interfaces reduce the need for separate communication controllers. Its 1 KB RAM and 32 KB flash are appropriate for moderate buffering and protocol firmware, and the 512-byte EEPROM can preserve calibration identifiers. For harsh installations, verify the selected operating-temperature grade and provide appropriate input protection, grounding, and isolation.
Recommandé
Appliance Control Board
The MC9S08EL32CTL can serve as the central controller in a cost-sensitive appliance, combining deterministic control with several communications options. Its 40 MHz 8-bit core manages button inputs, motor timing, PWM outputs, sensor conversion, and state-machine logic within 32 KB of flash and 1 KB of RAM. I²C or SPI can connect local sensors and displays, SCI can support a service interface, and LIN can participate in a wired appliance network. The watchdog timer supports recovery from unexpected states, while EEPROM can store configuration values that must survive power cycling.
Recommandé
Compact Motor Controller
The MC9S08EL32CTL is appropriate for compact motor-control subsystems where PWM, ADC feedback, and serial diagnostics are more important than high processor complexity. The MCU can execute a control loop on its 40 MHz S08 core, sample feedback through the ADC, generate PWM command signals, and expose operating information through SCI, SPI, or I²C. Its 32 KB flash can hold the control algorithm and diagnostics, while the 1 KB RAM supports working variables and status buffers. The design must add suitable driver circuitry, current protection, and thermal management around the power stage.
Recommandé
Consumer Device Controller
The MC9S08EL32CTL can control a cost-sensitive consumer device that needs local logic and multiple peripheral functions but not a high-end application processor. The 8-bit core handles user inputs, LED and motor timing, ADC measurements, and communication tasks at up to 40 MHz. Its 32 KB flash provides space for the primary firmware, 1 KB RAM supports short-term data handling, and EEPROM retains small configuration records. LIN, SCI, SPI, and I²C allow the controller to connect locally while keeping the main board compact. Firmware organization should include watchdog servicing and careful validation of power-sequencing behavior.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MC9S08EL32CTL — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MC9S08EL32MTL | S9S08SG32E1MTL |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP |
| CPU Architecture | 8-bit HCS08 core | 8-bit HCS08 core | 8-bit S08 core |
| Maximum Clock Frequency | 40 MHz | 40 MHz | 40 MHz |
| Program Memory | 32 KB flash | 32 KB flash | 32 KB flash |
Principaux différenciateurs
- Dedicated LIN interface within the same 28-pin TSSOP design (vs S9S08SG32E1MTL)
- Closest same-family thermal-grade option (vs MC9S08EL32MTL)
- Broad integrated peripheral set for compact embedded control (vs S9S08SG32E1MTL)
Notes de conception
Use the numbered 28-pin TSSOP drawing and pin-description table from the NXP MC9S08EL32 data sheet to create the PCB footprint. Place all decoupling capacitors adjacent to the corresponding supply pins, keep the ground return path short, and reserve programming or debug access for manufacturing. Because the package is narrow and has closely spaced leads, confirm solder mask, paste, and assembly clearances with the board house before release.
Design the supply network for the voltage range and current limits specified in the manufacturer's electrical-characteristics tables. Do not infer those limits from the 40 MHz clock rating. Place the required local bypass capacitance at the MCU rather than routing supply through long shared paths, and evaluate startup sequencing, reset behavior, and brownout response before adding external load switches or regulators.
Do not treat every 28-pin TSSOP MCU with 32 KB flash as an interchangeable replacement. Confirm the reset and clock pins, LIN interface, EEPROM, ADC channels, timer assignments, programming signals, and peripheral multiplexing in the complete pin table. A PCB may physically accept S9S08SG32E1MTL while firmware and electrical behavior differ, particularly when the design depends on SLIC or retained configuration data.
Route communication signals away from fast switching edges and noisy motor-drive stages, and provide a continuous ground reference beneath the MCU where practical. Keep LIN and other external interface return currents out of sensitive analog paths. If the ADC measures low-level sensors, use separate analog and digital grounding strategies where the application supports them, and follow the datasheet's recommended analog-pin layout.
Informations de conformité
The device family is associated with automotive and industrial applications, but individual RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations must be confirmed for the exact ordering code and current manufacturer documentation.