NXP Semiconductors

MC9S08EL32CTL - 40MHz 32KB 8-Bit MCU | NXP

Артикул: MC9S08EL32CTL ✗ Снят с производства
LVD and POR Vdss 28-pin TSSOP Package 40 MHz Speed 32 KB flash Memory
MOQ: 1 |

MC9S08EL32CTL Обзор

The NXP Semiconductors MC9S08EL32CTL is an 8-bit HCS08 microcontroller operating at up to 40 MHz, with 32 KB of flash memory, 1 KB of RAM, and 512 bytes of EEPROM in a 28-pin TSSOP package. The device includes 22 I/O lines and integrates I²C, LIN bus, SCI, SPI, ADC, PWM, watchdog timer, low-voltage detection, and power-on reset functions.

An HCS08 microcontroller is an embedded-control semiconductor combining a CPU core, program and data memory, peripheral interfaces, and general-purpose I/O in one package. The MC9S08EL32 belongs to the S08EL family, a cost-sensitive 8-bit MCU platform intended for automotive, industrial, consumer, and LIN-connected products. Its LIN controller, also called the Slave LIN Interface Controller or SLIC, is particularly useful in distributed systems where a microcontroller communicates with a vehicle or equipment LIN network.

The combination of 32 KB flash, 1 KB RAM, and 512 bytes of EEPROM provides enough memory for compact embedded control programs without an external memory device. Flash supports in-system programming, while EEPROM preserves calibration, configuration, or serial-number data when power is removed. The 40 MHz maximum clock rate supports responsive control loops and communication handling across the S08 peripheral set.

The MC9S08EL32CTL integrates serial interfaces for I²C, LIN, SCI, and SPI communication. It also provides analog-to-digital conversion, PWM generation, a watchdog timer, low-voltage detection, and power-on reset. These resources allow a compact control design to combine sensor acquisition, actuator timing, and network communication without requiring several separate interface ICs.

Typical uses include LIN slave nodes, automotive body and comfort modules, appliance controls, industrial interface controllers, sensor hubs, and compact motor-control systems. In a LIN design, the dedicated SLIC reduces firmware and external-interface overhead compared with implementing the LIN physical layer separately. The device can also serve as a general-purpose embedded controller when designers need a deterministic 8-bit platform with moderate flash capacity.

PCB design should preserve the 28-pin TSSOP footprint and route the power, ground, reset, clock, and communication pins according to the NXP pin-description table. Decoupling must be placed close to the supply pins, while exposed programming and debug functions should be brought out when production testing or field updates are required. Because the device is marked NRND, new designs should verify roadmap availability before committing to the MCU.

This product record combines the manufacturer's device specifications, lifecycle status, interface capabilities, package details, and practical design guidance. It also distinguishes genuine drop-in candidates from electrically similar parts that lack the original MCU's LIN controller or EEPROM resources, helping engineers evaluate PCB reuse without relying on headline clock-speed comparisons alone.

Аналоги без доработки для MC9S08EL32CTL — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с MC9S08EL32CTL (тот же форм-фактор и посадочное место) — отличается по Package.

NXP Semiconductors
Package: 28-TSSOP
Сравнить с MC9S08EL32CTL →

MC9S08EL32MTL

✅ Прямая замена ⚠️ Характеристики не проверены
📦 28-pin TSSOP
Same S08EL architecture, 40 MHz clock, 32 KB flash, 1 KB RAM, and 28-pin TSSOP footprint; the primary change is the extended temperature grade, with 0% change to the cited memory and clock ratings.

📋 Справочный аналог (нет в каталоге)

S9S08SG32E1MTL

✅ Прямая замена
📦 28-pin TSSOP
Both devices provide an 8-bit S08 core, 40 MHz maximum clock, 32 KB flash, and a 28-pin TSSOP footprint; the alternative has no confirmed MC9S08EL32CTL SLIC LIN controller or 512-byte EEPROM, representing a 100% flash match but a less certain peripheral match.

📋 Справочный аналог (нет в каталоге)

MC9S08EL32CTL Максимальные параметры и электрические характеристики

CPU Architecture 8-bit HCS08 core
Максимальная тактовая частота 40 MHz
Program Memory Size 32 KB flash
Program Memory Organization 32K x 8 bits
RAM Size 1 KB
EEPROM Size 512 x 8 bits
Number of I/O Pins 22
Корпус 28-pin TSSOP
Тип монтажа Surface mount
Serial Interfaces I²C, LIN bus, SCI, and SPI
Analog Peripheral ADC
Pulse-Width Modulation PWM
Watchdog Timer WDT
Voltage Supervision LVD and POR

Руководство по цоколевке MC9S08EL32CTL в корпусе 28-pin tssop

Цоколевка для MC9S08EL32CTL (корпус 28-pin tssop). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 28-pin tssop для MC9S08EL32CTL

Нет подробных данных о распиновке для MC9S08EL32CTL.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MC9S08EL32CTL подходит для 6 применениеs: LIN Slave Node, Automotive Body Control Module, Industrial Sensor Hub, Appliance Control Board, Compact Motor Controller, Consumer Device Controller.

🚗

LIN Slave Node

The MC9S08EL32CTL fits a LIN slave node because the S08EL family integrates the Slave LIN Interface Controller with a 40 MHz 8-bit core. A design can use the dedicated LIN hardware for network communication while the 22 I/O lines handle sensors, switches, and discrete outputs. The 32 KB flash and 1 KB RAM are sufficient for compact protocol and control firmware, while 512 bytes of EEPROM can retain configuration or calibration values. Engineers should budget the external LIN physical-layer components separately and verify timing, transceiver connection, and wake-up behavior against the device's reference configuration.

🚗

Automotive Body Control Module

The MC9S08EL32CTL supports compact automotive body-control tasks where an 8-bit CPU, 32 KB flash, and 22 I/O lines are sufficient. It can supervise switches, read analog sensors through the ADC, drive PWM outputs, and communicate over LIN, SCI, SPI, or I²C. Its 40 MHz clock rate allows responsive handling of several periodic tasks without moving routine logic into a higher-cost processor. The integrated EEPROM is useful for retaining node settings, while watchdog, low-voltage detection, and power-on reset functions help organize a dependable control design for vehicle environment and production-test requirements.

🏭

Industrial Sensor Hub

The MC9S08EL32CTL is well suited to a small industrial sensor hub that must collect measurements and forward them over a serial network. The ADC handles analog sensor inputs, PWM supports actuator or signaling functions, and the integrated I²C, SPI, SCI, and LIN interfaces reduce the need for separate communication controllers. Its 1 KB RAM and 32 KB flash are appropriate for moderate buffering and protocol firmware, and the 512-byte EEPROM can preserve calibration identifiers. For harsh installations, verify the selected operating-temperature grade and provide appropriate input protection, grounding, and isolation.

🔧

Appliance Control Board

The MC9S08EL32CTL can serve as the central controller in a cost-sensitive appliance, combining deterministic control with several communications options. Its 40 MHz 8-bit core manages button inputs, motor timing, PWM outputs, sensor conversion, and state-machine logic within 32 KB of flash and 1 KB of RAM. I²C or SPI can connect local sensors and displays, SCI can support a service interface, and LIN can participate in a wired appliance network. The watchdog timer supports recovery from unexpected states, while EEPROM can store configuration values that must survive power cycling.

⚡

Compact Motor Controller

The MC9S08EL32CTL is appropriate for compact motor-control subsystems where PWM, ADC feedback, and serial diagnostics are more important than high processor complexity. The MCU can execute a control loop on its 40 MHz S08 core, sample feedback through the ADC, generate PWM command signals, and expose operating information through SCI, SPI, or I²C. Its 32 KB flash can hold the control algorithm and diagnostics, while the 1 KB RAM supports working variables and status buffers. The design must add suitable driver circuitry, current protection, and thermal management around the power stage.

🧩

Consumer Device Controller

The MC9S08EL32CTL can control a cost-sensitive consumer device that needs local logic and multiple peripheral functions but not a high-end application processor. The 8-bit core handles user inputs, LED and motor timing, ADC measurements, and communication tasks at up to 40 MHz. Its 32 KB flash provides space for the primary firmware, 1 KB RAM supports short-term data handling, and EEPROM retains small configuration records. LIN, SCI, SPI, and I²C allow the controller to connect locally while keeping the main board compact. Firmware organization should include watchdog servicing and careful validation of power-sequencing behavior.

Сводка рекомендуемых товаров

MC9S08EL32CTL NXP Semiconductors Используется в: LIN Slave Node, Automotive Body Control Module, Industrial Sensor Hub, Appliance Control Board, Compact Motor Controller, Consumer Device Controller MC9S08EL16 Related HCS08 family member Используется в: LIN Slave Node, Automotive Body Control Module, Compact Motor Controller MC9S08SL16 Related low-cost S08 family member Используется в: LIN Slave Node, Appliance Control Board MC9S08SL8 Related low-cost S08 microcontroller Используется в: Industrial Sensor Hub, Consumer Device Controller
What are the key specifications of MC9S08EL32CTL that engineers should know?
The MC9S08EL32CTL is an 8-bit HCS08 microcontroller rated up to 40 MHz, with 32 KB of flash, 1 KB of RAM, 512 bytes of EEPROM, and 22 I/O lines in a 28-pin TSSOP package. According to the NXP MC9S08EL32 data sheet, Rev. 3, it integrates I²C, LIN, SCI, SPI, ADC, PWM, watchdog, low-voltage detection, and power-on reset. These resources make it suitable for compact embedded-control and LIN-node designs.
What is the operating voltage of MC9S08EL32CTL?
The MC9S08EL32CTL operating-voltage limits must be selected from the device's supply pins and voltage-characteristic tables in the NXP MC9S08EL32 data sheet, Rev. 3. The MCU combines a 40 MHz 8-bit core with 32 KB flash, 1 KB RAM, and 512 bytes of EEPROM. Use the manufacturer pin-description and electrical-characteristics tables when selecting the regulator, decoupling network, and overvoltage margin.
What memory and peripherals does MC9S08EL32CTL include?
The MC9S08EL32CTL includes 32 KB of flash program memory, 1 KB of RAM, and 512 bytes of EEPROM. Its integrated peripherals include I²C, LIN, SCI, SPI, ADC, PWM, a watchdog timer, low-voltage detection, and power-on reset. According to the NXP MC9S08EL32 data sheet, Rev. 3, the 22 I/O lines support peripheral multiplexing and cost-sensitive embedded control.
Where can I download the MC9S08EL32CTL datasheet PDF?
The official MC9S08EL32CTL data sheet is available from NXP at https://www.nxp.com/docs/en/data-sheet/MC9S08EL32.pdf. The document is titled MC9S08EL32 and covers the MC9S08EL32, MC9S08EL16, MC9S08SL16, and MC9S08SL8 series MCUs. Use its pin-description table, memory map, electrical characteristics, and package drawings when preparing a new design.
Where can I find the MC9S08EL32CTL pinout?
The authoritative MC9S08EL32CTL pin assignment is shown in the pin-description table of the official NXP MC9S08EL32 data sheet, Rev. 3. The component uses a 28-pin TSSOP package with 22 I/O pins, alongside supply, ground, reset, clock, and programming connections. Use the PDF's numbered package drawing to map those functions to the PCB footprint.
Is MC9S08EL32CTL suitable for a LIN slave application?
Yes, the MC9S08EL32CTL is suitable for a LIN slave because its S08EL feature set includes the Slave LIN Interface Controller, or SLIC. The MCU also provides I²C, SCI, SPI, ADC, PWM, and watchdog functions around the same 40 MHz core. This integration reduces the need for a separate LIN interface device in appropriately designed LIN networks.
Where to buy MC9S08EL32CTL online?
Use the Request a Quote form on this page to request MC9S08EL32CTL availability, lead time, and ordering information. The NXP product page identifies the device as NRND, so supply status should be confirmed for the exact 28-pin TSSOP ordering code before a new production release. The form avoids stale stock assertions and connects the request with the exact MPN.
What is the price of MC9S08EL32CTL?
The current commercial terms for MC9S08EL32CTL are available through the Request a Quote form on this page. Because the MCU is marked NRND, availability and order quantities can change independently of the electrical characteristics. Include your target quantity, packaging requirements, and shipment destination in the request so the order can be evaluated against the exact MC9S08EL32CTL ordering code.
What is the lead time for MC9S08EL32CTL?
Request the current MC9S08EL32CTL lead time and minimum order quantity through the Request a Quote form on this page. The manufacturer lists the device as NRND rather than active, which makes a project-specific supply confirmation important for scheduled production. Provide the annual usage and required delivery dates so the quotation can reflect the appropriate supply commitment.
Is MC9S08EL32CTL in stock?
MC9S08EL32CTL stock should be confirmed through the Request a Quote form on this page rather than inferred from a catalog page. The manufacturer identifies the exact device as NRND, so current inventory can vary by package, reel, and order quantity. Submit the MPN and required quantity for a current availability and lead-time response.
What is the best drop-in replacement for MC9S08EL32CTL?
MC9S08EL32MTL is the closest same-family replacement candidate because it retains the S08EL 28-pin TSSOP implementation while changing the temperature grade. MC9S08EL32CTL is the 40 MHz, 32 KB-flash industrial-temperature ordering code; MC9S08EL32MTL is the extended-temperature counterpart. Confirm the pin table, clock, memory, LIN, and power connections before treating either device as a drop-in replacement.
Can S9S08SG32E1MTL replace MC9S08EL32CTL?
S9S08SG32E1MTL is a pin-oriented 28-pin TSSOP alternative with a 40 MHz S08 core and 32 KB flash, but it is not an exact functional replacement for every MC9S08EL32CTL design. The MC9S08EL32CTL includes the SLIC LIN interface and 512 bytes of EEPROM, while those resources are not confirmed for S9S08SG32E1MTL. Verify the package pin map, communications peripherals, memory map, and firmware dependencies.
MC9S08EL32CTL vs S9S08SG32E1MTL - which is better for LIN control?
MC9S08EL32CTL is the better choice for LIN-focused designs because the S08EL family explicitly includes the Slave LIN Interface Controller. S9S08SG32E1MTL is a 40 MHz, 32 KB-flash, 28-pin TSSOP MCU candidate, but its LIN and EEPROM resources are not established as equivalent. Choose the original S08EL device when the LIN peripheral and 512-byte EEPROM are required without redesign.
When should I choose MC9S08EL32CTL over another 8-bit MCU?
Choose MC9S08EL32CTL when a design needs an established 8-bit HCS08 platform with 40 MHz operation, 32 KB flash, 1 KB RAM, EEPROM, and dedicated LIN support in a 28-pin TSSOP. It is particularly suitable for LIN slave nodes and compact automotive or industrial controls. Select another MCU when the application requires substantially more RAM, a different bus set, a smaller package, or a current non-NRND roadmap.
What can replace MC9S08EL32CTL in an existing PCB design?
The most credible direct replacement is MC9S08EL32MTL because it remains in the S08EL family, uses the 28-pin TSSOP footprint, and preserves the 40 MHz, 32 KB-flash, 1 KB-RAM configuration while extending the temperature grade. S9S08SG32E1MTL is a broader alternative. Before replacement, compare every pin, the LIN block, EEPROM availability, reset behavior, clock setup, and firmware image compatibility.

Справочные инженерные данные для MC9S08EL32CTL — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose MC9S08EL32CTL when the design needs an established 8-bit HCS08 controller with 32 KB flash, 1 KB RAM, 512 bytes of EEPROM, 22 I/O lines, and dedicated SLIC LIN support in a 28-pin TSSOP. It is particularly appropriate for LIN slave nodes, appliance controls, sensor hubs, and compact automotive body-control functions. MC9S08EL32MTL is the preferred candidate when the same electrical design and footprint are required but the system needs the extended-temperature ordering option; confirm its pin table and operating limits before release. S9S08SG32E1MTL may suit a design that primarily needs a 40 MHz S08 core with 32 KB flash in the same package, but it should not replace an MC9S08EL32CTL design when SLIC, EEPROM, or exact peripheral mapping is required. For new projects with greater memory, more I/O, or a current product roadmap, evaluate whether the NRND S08EL device is the appropriate long-term platform.

Сравнение с аналогами

Параметр Этот товар MC9S08EL32MTL S9S08SG32E1MTL
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP
CPU Architecture 8-bit HCS08 core 8-bit HCS08 core 8-bit S08 core
Maximum Clock Frequency 40 MHz 40 MHz 40 MHz
Program Memory 32 KB flash 32 KB flash 32 KB flash

Ключевые отличия

  • Dedicated LIN interface within the same 28-pin TSSOP design (против S9S08SG32E1MTL)
  • Closest same-family thermal-grade option (против MC9S08EL32MTL)
  • Broad integrated peripheral set for compact embedded control (против S9S08SG32E1MTL)

Заметки по проектированию

Use the numbered 28-pin TSSOP drawing and pin-description table from the NXP MC9S08EL32 data sheet to create the PCB footprint. Place all decoupling capacitors adjacent to the corresponding supply pins, keep the ground return path short, and reserve programming or debug access for manufacturing. Because the package is narrow and has closely spaced leads, confirm solder mask, paste, and assembly clearances with the board house before release.

Design the supply network for the voltage range and current limits specified in the manufacturer's electrical-characteristics tables. Do not infer those limits from the 40 MHz clock rating. Place the required local bypass capacitance at the MCU rather than routing supply through long shared paths, and evaluate startup sequencing, reset behavior, and brownout response before adding external load switches or regulators.

Do not treat every 28-pin TSSOP MCU with 32 KB flash as an interchangeable replacement. Confirm the reset and clock pins, LIN interface, EEPROM, ADC channels, timer assignments, programming signals, and peripheral multiplexing in the complete pin table. A PCB may physically accept S9S08SG32E1MTL while firmware and electrical behavior differ, particularly when the design depends on SLIC or retained configuration data.

Route communication signals away from fast switching edges and noisy motor-drive stages, and provide a continuous ground reference beneath the MCU where practical. Keep LIN and other external interface return currents out of sensitive analog paths. If the ADC measures low-level sensors, use separate analog and digital grounding strategies where the application supports them, and follow the datasheet's recommended analog-pin layout.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The device family is associated with automotive and industrial applications, but individual RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations must be confirmed for the exact ordering code and current manufacturer documentation.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MC9S08EL32CTL datasheet MC9S08EL32CTL pinout MC9S08EL32CTL datasheet pdf MC9S08EL32CTL equivalent MC9S08EL32CTL replacement MC9S08EL32CTL price MC9S08EL32CTL stock NXP MC9S08EL32CTL MC9S08EL32CTL TSSOP footprint MC9S08EL32CTL LIN controller MC9S08EL32CTL vs S9S08SG32E1MTL MC9S08EL32 32KB flash 40MHz

Связанные компоненты & термины

NXP Semiconductors MC9S08EL32CTL MC9S08EL32MTL S9S08SG32E1MTL MC9S08EL32 HCS08 S08 core 8-bit microcontroller embedded microcontroller semiconductor Slave LIN Interface Controller SLIC LIN bus I²C SCI SPI ADC PWM watchdog timer EEPROM flash memory 40 MHz 28-pin TSSOP surface mount power-on reset low-voltage detection
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ