MC9S08GT16CFDR2 - 20MHz 8-Bit Flash MCU | NXP Semiconductors
Référence : MC9S08GT16CFDR2 ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
MC9S08GT16CFDR2 Présentation
A microcontroller is an integrated circuit that combines a processor core, memory, and peripheral functions into one device used to read inputs, execute control logic, and drive outputs. MC9S08GT16CFDR2 is specifically positioned within the S08 family, whose enhanced 8-bit architecture targets cost-effective, high-performance general-purpose embedded control. Its hierarchy is microcontroller → 8-bit microcontroller → S08 microcontroller → MC9S08GT family.
The strongest verified specifications are a 20 MHz operating frequency, HCMOS process designation, 8-bit architecture, flash memory, industrial temperature grade, and 48 no-lead square package terminals. The Partstack package code is HVQCCN. Flash integration supports firmware retention in an embedded design, although the exact flash capacity and programming specifications were not provided and must be confirmed from the MC9S08GT16 manufacturer datasheet before firmware-bank or boot-loader planning.
The supplied family result identifies MC9S08GT16A variants as cost-effective, high-performance S08 general-purpose 8-bit microcontrollers using the enhanced S08 core. It also states that the GT family offers multiple modules, memory sizes, and package choices. These family characteristics make the device applicable to industrial controllers, communication modules, human-interface systems, and compact embedded products, subject to verification of the exact peripherals and interfaces in the MC9S08GT16 documentation.
A critical design consideration is exposed-pad thermal management. Because the package includes an exposed pad, the PCB thermal design must provide adequate copper and via connectivity, while power and ground pins must follow the exact manufacturer land pattern and pinout. Do not assume the exposed pad is interchangeable with a normal signal pin; consult the manufacturer pin assignment and recommended footprint before layout release.
This page consolidates the verified distributor descriptions, package identity, family positioning, sourcing links, and replacement-evaluation constraints into one engineering reference. It also distinguishes confirmed facts from missing data so engineers can identify the MC9S08GT16CFDR2 quickly and proceed to authoritative pinout, memory, electrical, lifecycle, and pricing validation before design commitment.
Alternatives de remplacement direct pour MC9S08GT16CFDR2 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MC9S08GT16CFDR2 (même facteur de forme et même empreinte).
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MC9S08GT16ACFDE
✅ Remplacement direct✓ En stock
$9.3 / unité
Voir la fiche technique →MC9S08GT16CFDR2 Valeurs maximales et caractéristiques électriques
| Product Type | 8-bit flash microcontroller |
| Architecture | Enhanced S08 core |
| Fréquence d'horloge maximale | 20 MHz |
| Program Memory Type | Flash |
| Process Technology | HCMOS |
| Temperature Grade | Industrial |
| Number of Terminals | 48 terminals |
| Terminal Form | No lead |
| Package Shape | Square |
| Package Code | HVQCCN |
| Type de montage | Surface mount |
Guide de configuration des broches du MC9S08GT16CFDR2 hvqccn
Configuration des broches du MC9S08GT16CFDR2 (boîtier hvqccn). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour MC9S08GT16CFDR2.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MC9S08GT16CFDR2 convient pour 6 applications: Industrial Embedded Controller, Human Interface and Panel Control, Communication Interface Module, Motor and Relay Control, Instrumentation and Data Acquisition, Consumer and Appliance Control.
Industrial Embedded Controller
The MC9S08GT16CFDR2 fits compact industrial control logic that requires an 8-bit flash microcontroller and a 20 MHz S08-class processing core. Its verified industrial temperature grade and compact 48-terminal no-lead package support applications where control density and board area matter. The device should sit between external sensors, power stages, and communication interfaces, executing deterministic acquisition and actuator-control tasks. Before schematic release, verify the exact I/O count, ADC resources, timers, serial interfaces, supply range, and pin assignments in the manufacturer datasheet, because those specifications were not included in the supplied search data.
Recommandé
Human Interface and Panel Control
The 20 MHz MC9S08GT16CFDR2 is suitable for keypad scanning, display state management, indicator control, debouncing, and local menu logic in a compact human-interface panel. Its 8-bit architecture and integrated flash suit embedded firmware dedicated to front-panel behavior while retaining deterministic peripheral-driven input handling. The 48-terminal HVQCCN footprint can support mixed signal and control routing when assigned correctly, although no individual pinout was available in the verified results. Validate LCD, button, rotary-encoder, and communication interfaces against the exact MC9S08GT16 pin and peripheral tables before selecting it.
Recommandé
Communication Interface Module
The MC9S08GT16CFDR2 can serve as the supervisory controller in a communication module because it combines a 20 MHz 8-bit core with flash-resident firmware in a compact package. Typical tasks include framing, protocol state management, timeout handling, status reporting, and host-command processing. Its suitability depends on having the required UART, SPI, or other interface resources and sufficient I/O pins; neither was present in the verified snippets. Engineers must therefore review the family datasheet, peripheral muxing, clock requirements, and electrical limits before assigning serial functions or estimating protocol throughput.
Recommandé
Motor and Relay Control
The MC9S08GT16CFDR2 is applicable to small motor, solenoid, relay, and stepper-control subsystems where firmware must coordinate timing, state machines, fault handling, and digital outputs. Its 20 MHz clock provides a processing headroom target for multi-state control logic, while flash retains program code and potentially nonvolatile parameters according to the exact device memory map. The supplied data does not confirm PWM channels, capture/compare resources, output-drive ratings, or package pin assignments. Those functions must be verified before sizing transistors, flyback paths, or motor-drive stages.
Recommandé
Instrumentation and Data Acquisition
The MC9S08GT16CFDR2 is a candidate for compact instrumentation that acquires sensor inputs, applies calibration, controls a display, and sends processed measurements. Its enhanced S08 core and 20 MHz maximum frequency suit modest control workloads, but analog performance cannot be inferred from the clock rate. The design must confirm whether the exact MCU includes an ADC and, if so, its resolution, sample rate, input range, acquisition time, and reference source. Sensor excitation, analog filtering, grounding, calibration storage, and digital filtering should be developed only after those manufacturer specifications and the complete pinout are verified.
Recommandé
Consumer and Appliance Control
The MC9S08GT16CFDR2 can implement low-cost appliance or product-control logic using flash-resident firmware, digital inputs, relay or transistor outputs, and local indicators. Its compact square no-lead package helps reduce board footprint, while the 8-bit architecture aligns with straightforward state-machine and user-interface code. Commercial deployment still requires confirmation of lifecycle status, operating-temperature limits, supply voltage, watchdog or brownout behavior, and EMC constraints. Those data were unavailable in the verified sources, so this application should proceed through manufacturer qualification and representative-unit testing rather than relying on catalog snippets.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MC9S08GT16CFDR2 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MC9S08GT16ACFDE |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Product Type | 8-bit flash microcontroller | S08 general-purpose 8-bit microcontroller |
| Core | Enhanced S08 core | Enhanced S08 core |
Principaux différenciateurs
- Confirmed 20 MHz operating target (vs MC9S08GT16ACFDE)
- Confirmed industrial-grade marking (vs MC9S08GT16ACFDE)
- Confirmed 48-terminal HVQCCN identity (vs MC9S08GT16ACFDE)
Notes de conception
The verified package data identifies a 48-terminal no-lead HVQCCN package and the Hotenda snippet mentions an exposed pad. Use the manufacturer land pattern to connect the exposed pad and preserve its intended thermal or electrical function. Provide uninterrupted ground copper and multiple thermal vias where permitted, then estimate junction rise using the actual PCB thermal model and maximum ambient temperature. Do not infer thermal performance from package name alone because junction-to-ambient and junction-to-case data were not supplied.
Do not release the PCB until the exact 48-terminal pinout, pin pitch, pad dimensions, solder mask, paste stencil, and exposed-pad connection have been checked against the controlled NXP or Freescale package drawing. Keep decoupling branches close to the relevant supply pins, maintain a continuous return path beneath signal routes, and separate noisy switching or motor-return current from sensitive inputs. Because no verified pin assignment was provided, copying a generic QFN-48 footprint is not safe.
Do not treat the GT family relationship as proof of interchangeability. MC9S08GT16ACFDE was identified as a family product, but its exact package, pinout, memory, clock, and electrical configuration were not available. Before replacement, compare the complete ordering information and verify software compatibility, bootloader assumptions, watchdog behavior, interrupt vectors, pin multiplexing, and brownout limits. A different package suffix can require mechanical and routing changes even when the core is identical.
Informations de conformité
The supplied distributor and family-product results do not provide verified environmental or material-compliance declarations. Industrial temperature grade does not imply AEC-Q100 qualification.
