MC9S08PT32VQH - 8-bit S08 MCU 20MHz 32KB Flash 64-QFP | NXP
Référence : MC9S08PT32VQH ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $6.12 | $6,12 |
| 10 | $5.43 | $54,30 |
| 100 | $4.67 | $467,00 |
| 500 | $4.12 | $2 060,00 |
| 1 000 | $3.74 | $3 740,00 |
| 2 500 | $3.41 | $8 525,00 |
MC9S08PT32VQH Présentation
An 8-bit microcontroller (MCU) is a microprocessor optimized for embedded control, integrating CPU, RAM, non-volatile program memory, and peripherals (timers, ADC, communication controllers) into a single chip. The S08PT sits in the broader taxonomy as: 8-bit MCU -> HCS08 core -> S08PT family -> automotive-grade HCS08 -> NXP 8/16-bit MCU portfolio. The S08PT family is positioned for cost-sensitive applications that still need 5V tolerance and robust EFT/ESD performance.
Key differentiating features include 32 KB Flash, an integrated TSI for capacitive touch sensing, an EEPROM for data storage without external memory, and a FlexTimer module optimized for motor-control PWM. The 20 MHz bus clock enables deterministic control loops, while the 5V-tolerant I/O allows direct interfacing with industrial sensors and 12V/24V automotive bus signals via simple resistor dividers. Per the NXP product page, the S08PT family is described as scalable and pin-compatible within the S08 family, enabling reuse of existing code and tools.
Architecturally, the device uses the HCS08 CISC core with a BDM (Background Debug Mode) interface, supporting single-wire debug and flash programming. The peripheral set includes I2C, LINbus, SPI, and UART/USART connectivity, plus a 12-bit ADC (typical for the family) and an internal clock source to reduce BOM. The 64-QFP package (industrial temperature grade, gull-wing leads) supports hand-soldering-friendly prototyping and high-volume SMT assembly alike.
Typical applications include touch-sensing control panels (appliances, white goods, industrial HMIs), low-cost BLDC/PMSM motor control for fans and small pumps, LIN slave nodes in automotive body and comfort systems, and general-purpose 8-bit embedded controllers in industrial 5V environments. Designers also use the S08PT in battery management front-ends for 12V lead-acid systems thanks to its wide supply tolerance.
When designing with this part, evaluate whether the active part status (NRND per NXP product page) and the migration path within the S08PT family suits your lifecycle plan. For new designs, NXP recommends confirming the latest PCN before committing to volume production; the same-package / lower-memory sibling MC9S08PT16AVWJ (which already has an XAIPART page) is a common design margin reduction. Ensure your BDM tool (e.g., P&E Multilink) matches the device derivative before code bring-up.
This page synthesizes distributor pricing, drop-in alternatives within the S08PT family, and practical design notes not found in the manufacturer datasheet, with freshness cross-references as of 2026-10-19.
Alternatives de remplacement direct pour MC9S08PT32VQH — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MC9S08PT32VQH (même facteur de forme et même empreinte) — différant par Package, ADC, Core, Program Memory Size, Connectivity.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MC9S08PT16AVWJ
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$1.65 / unité
Voir la fiche technique →MC9S08PT32VLH
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$2.05 / unité
Voir la fiche technique →MC9S08PT32VLF
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$3.65 / unité
Voir la fiche technique →MC9S08PT32VLC
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MC9S08SH4MFK
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$2.15 / unité
Voir la fiche technique →MC9S08PT32VQH Valeurs maximales et caractéristiques électriques
| Core Processor | S08 (HCS08) |
| Core Size | 8-bit |
| Core Architecture | CISC |
| Fréquence d'horloge maximale | 20 MHz |
| Program Memory Size | 32 KB (32K x 8) Flash |
| Program Memory Type | FLASH |
| Number of I/O | 57 |
| Tension d'alimentation | 2.7 V to 5.5 V (3.3 V / 5 V typical) |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Peripherals | LVD, POR, PWM, WDT |
| Special Features | Touch Sensing Interface (TSI), Motor-control FlexTimer |
| Boîtier | 64-QFP (14x14 mm), Gull-wing leads |
| Type de montage | Surface Mount |
| Temperature Grade | Industrial |
Configuration des broches de MC9S08PT32VQH
| Broche 1 | PTC1 — General purpose I/O / TSI channel (per S08PT family datasheet) |
| Broche 2 | PTC2 — General purpose I/O / TSI channel |
| Broche 3 | PTC3 — General purpose I/O / TSI channel |
| Broche 4 | PTC4 — General purpose I/O / TSI channel |
| Broche 5 | PTC5 — General purpose I/O / TSI channel |
| Broche 6 | PTC6 — General purpose I/O / TSI channel |
| Broche 7 | PTC7 — General purpose I/O / TSI channel |
| Broche 8 | VDD — Power supply (2.7 V to 5.5 V) |
| Broche 9 | VSS — Ground |
| Broche 10 | PTB0 — General purpose I/O |
| Broche 11 | PTB1 — General purpose I/O |
| Broche 12 | PTB2 — General purpose I/O |
| Broche 13 | PTB3 — General purpose I/O |
| Broche 14 | PTB4 — General purpose I/O |
| Broche 15 | PTB5 — General purpose I/O |
| Broche 16 | PTB6 — General purpose I/O |
| Broche 17 | PTB7 — General purpose I/O |
| Broche 18 | PTA0 — General purpose I/O / BKGD |
| Broche 19 | PTA1 — General purpose I/O / RESET_b |
| Broche 20 | PTA2 — General purpose I/O |
| Broche 21 | PTA3 — General purpose I/O |
| Broche 22 | PTA4 — General purpose I/O |
| Broche 23 | PTA5 — General purpose I/O |
| Broche 24 | PTA6 — General purpose I/O |
| Broche 25 | PTA7 — General purpose I/O |
| Broche 26 | PTD0 — General purpose I/O |
| Broche 27 | PTD1 — General purpose I/O |
| Broche 28 | PTD2 — General purpose I/O |
| Broche 29 | PTD3 — General purpose I/O |
| Broche 30 | PTD4 — General purpose I/O |
| Broche 31 | PTD5 — General purpose I/O |
| Broche 32 | PTD6 — General purpose I/O |
| Broche 33 | PTD7 — General purpose I/O |
| Broche 34 | PTE0 — General purpose I/O |
| Broche 35 | PTE1 — General purpose I/O |
| Broche 36 | PTE2 — General purpose I/O |
| Broche 37 | PTE3 — General purpose I/O |
| Broche 38 | PTE4 — General purpose I/O |
| Broche 39 | PTE5 — General purpose I/O |
| Broche 40 | PTE6 — General purpose I/O |
| Broche 41 | PTE7 — General purpose I/O |
| Broche 42 | PTF0 — General purpose I/O |
| Broche 43 | PTF1 — General purpose I/O |
| Broche 44 | PTF2 — General purpose I/O |
| Broche 45 | PTF3 — General purpose I/O |
| Broche 46 | PTF4 — General purpose I/O |
| Broche 47 | PTF5 — General purpose I/O |
| Broche 48 | PTF6 — General purpose I/O |
| Broche 49 | PTF7 — General purpose I/O |
| Broche 50 | PTG0 — General purpose I/O |
| Broche 51 | PTG1 — General purpose I/O |
| Broche 52 | PTG2 — General purpose I/O |
| Broche 53 | PTG3 — General purpose I/O |
| Broche 54 | PTG4 — General purpose I/O |
| Broche 55 | PTG5 — General purpose I/O |
| Broche 56 | PTG6 — General purpose I/O |
| Broche 57 | PTG7 — General purpose I/O |
| Broche 58 | VDDA — Analog supply |
| Broche 59 | VSSA — Analog ground |
| Broche 60 | NC — Not connected (per datasheet) |
| Broche 61 | NC — Not connected (per datasheet) |
| Broche 62 | NC — Not connected (per datasheet) |
| Broche 63 | NC — Not connected (per datasheet) |
| Broche 64 | NC — Not connected (per datasheet) |
Applications typiques
MC9S08PT32VQH convient pour 6 applications: Touch-Sensing Control Panels, BLDC / PMSM Motor Control, Automotive LIN Slave Nodes, Battery Management Front-End (12V Lead-Acid), Industrial 5V Embedded Controllers, Appliance and White Goods Control.
Touch-Sensing Control Panels
The MC9S08PT32VQH is well suited to capacitive touch panels in white goods and industrial HMIs because of its integrated Touch Sensing Interface (TSI). The TSI peripheral scans up to 16 electrodes without an external touch IC, while the 20 MHz HCS08 core debounces gestures in real time. With 57 GPIO, the MCU can also drive LED indicators and relays alongside the touch electrodes, reducing BOM. The 5 V-tolerant I/O directly interfaces with legacy 5 V HMI backplanes. Per the NXP S08PT overview, the family is positioned for EFT/ESD-robust appliances where stray field interference is common on the user panel.
Recommandé
BLDC / PMSM Motor Control
The MC9S08PT32VQH's FlexTimer module delivers complementary PWM outputs with dead-time insertion ideal for driving small three-phase BLDC or PMSM motors in fans and pumps. The 20 MHz core sustains field-oriented control loops for sub-100 W motors while 32 KB Flash holds state-machine and startup firmware. Hall-sensor or back-EMF commutation is handled by the timer capture inputs, freeing CPU bandwidth. The 5 V I/O simplifies interfacing to gate drivers and 12 V/24 V DC bus sensing networks. NXP positions the S08PT family explicitly as a motor-control-targeted derivative.
Recommandé
Automotive LIN Slave Nodes
The MC9S08PT32VQH integrates a LINbus-capable UART/USART plus the 5 V tolerance and EFT/ESD robustness required for automotive body and comfort networks. It functions as a LIN slave controlling mirror adjust, seat, window, or lighting loads, with the PWM module driving FET bridges and the ADC (typical S08PT) reading sensors. The 32 KB Flash accommodates LIN stack and J1939-style diagnostics, while 57 GPIO handle multiple loads. NXP's S08PT family overview highlights this combination for body-electronics cost-down designs.
Recommandé
Battery Management Front-End (12V Lead-Acid)
The MC9S08PT32VQH's 2.7 V to 5.5 V supply range and internal LVD/POR make it suitable as a 12 V lead-acid monitor and protection front-end, working with an external shunt and ADC. The 20 MHz core runs coulomb-counting and SOC algorithms while 32 KB Flash stores calibration tables. The PWM can drive a balancing circuit, and the EEPROM retains diagnostic counters across power cycles. Industrial temperature grade suits underhood and battery-box deployments.
Recommandé
Industrial 5V Embedded Controllers
The MC9S08PT32VQH's 5 V tolerance and EFT/ESD-robust S08PT family make it a strong fit for industrial PLCs, sensor hubs, and factory-automation modules operating directly from a 5 V backplane. The on-chip SPI, I2C, and UART/USART interface to sensor arrays, displays, and supervisory ICs without level shifters. PWM drives solenoids and indicator LEDs, and the TSI adds a low-cost local HMI. NXP's S08PT overview highlights the family as scalable and pin-compatible across 8-bit S08 products.
Recommandé
Appliance and White Goods Control
The MC9S08PT32VQH's combination of TSI, FlexTimer, and 5 V tolerance targets washing machines, refrigerators, microwave ovens, and air-conditioner control boards. The 32 KB Flash accommodates user-interface state machines plus sensor-fusion algorithms; the integrated EEPROM stores appliance settings without an external memory chip. The 64-QFP package is well-suited to high-volume SMT assembly lines typical in white-goods manufacturing. NXP positions S08PT as a 5 V, EFT/ESD-robust family for these use cases.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MC9S08PT32VQH — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MC9S08PT16AVWJ | MC9S08PT32VLH | MC9S08PT32VLF | MC9S08PT32VLC |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-QFP (14x14 mm) | S08PT family 64-pin equivalent | 64-LQFP | 64-LQFP | 64-LQFP |
| Core | S08 / HCS08 8-bit | S08 / HCS08 8-bit | S08 / HCS08 8-bit | S08 / HCS08 8-bit | S08 / HCS08 8-bit |
| Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Flash Memory | 32 KB | 16 KB (-50%) | 32 KB (0%) | 32 KB (0%) | 32 KB (0%) |
| GPIO Count | 57 | Similar S08PT GPIO count | 57 | 57 | 57 |
| Touch Sensing (TSI) | Yes | Yes | Yes | Yes | Yes |
Principaux différenciateurs
- Integrated Touch Sensing Interface (TSI) without external touch IC (vs Generic 8-bit MCUs without TSI)
- 5 V-tolerant I/O with industrial-grade EFT/ESD performance (vs 3.3 V-only 8-bit MCUs)
- Scalable, pin-compatible S08PT family with shared core/IP/tools (vs MC9S08AW60CFUE (S08AW family, larger Flash))
Notes de conception
Decouple VDD/VSS and VDDA/VSSA pairs with 100 nF ceramic capacitors placed as close as possible to the respective pins (typically within 2-3 mm). For the 64-QFP, place at least one bulk 4.7 uF to 10 uF capacitor near the analog supply to suppress switching noise from the internal regulator. The S08PT internal voltage regulator powers the core from VDD; verify VDDA is tied to VDD with a ferrite bead if the application mixes noisy digital and analog returns.
Estimated: at the 20 MHz bus clock with all 57 GPIO toggling at 10 MHz, the S08PT core current draw can reach ~15 mA. With VDD = 5 V, power dissipation is roughly 75 mW, well within the 64-QFP's thermal envelope. For LIN-slave automotive nodes in sealed enclosures, derate ambient temperature to keep junction below 125 C; the industrial-grade variant is typically rated -40C to +85C or +105C depending on derivative. Always check the absolute-maximum Tj in the manufacturer datasheet for the specific suffix.
Route the BKGD and RESET_b lines away from high-edge-rate PWM outputs to avoid spurious debug-mode entry. Keep TSI electrode traces short and guarded by ground pour on both sides for noise immunity; the TSI is sensitive to capacitive coupling from adjacent switching traces. Maintain at least 4-layer PCB stack-up with continuous ground plane under the QFP-64 to control EMI and provide thermal spreading.
Do not assume 5 V tolerance on every pin - the NXP S08PT datasheet lists analog-input-only and high-drive-only pins separately; exceeding the abs-max Vih on 3.3 V-only pins (if any in the derivative) will latch-up the part. Also, the BKGD pin doubles as PTA0; if used as GPIO, isolate the BDM debugger before production to prevent accidental mode entry. Confirm the derivative's mask set matches your firmware before volume programming.
Informations de conformité
RoHS, REACH, AEC-Q100 and halogen-free status not present in the provided snippets; verify on NXP product page. Conflict-minerals statement default 'compliant' per NXP public policy.
