MC9S08RG60CFJ - 8-Bit 8MHz 60KB Flash MCU | NXP
Référence : MC9S08RG60CFJ ✓ ActifMC9S08RG60CFJ Présentation
An 8-bit microcontroller is a compact computing platform that integrates a processor core, memory, and peripherals into one semiconductor device. Within the embedded-control hierarchy, the MC9S08RG60CFJ belongs to the S08 family of 8-bit microcontrollers, combining Flash program memory with serial communications and reset functions. This device type is used when a controller must execute control logic, monitor external conditions, and communicate with sensors or other embedded modules without requiring a high-performance processor.
The principal device features include an 8 MHz maximum operating frequency, 60 KB of Flash program memory, 2 KB of SRAM, SCI and SPI serial interfaces, and a compact 32-LQFP package. The 7 x 7 mm package provides a practical board-area reduction for embedded products while exposing 32 pins for power, ground, reset, programming, clock, input, output, and serial-interface functions. Its -40°C to +85°C temperature range supports industrial-temperature product designs.
The S08 architecture is designed for cost-sensitive embedded control rather than high-throughput computation. Flash memory retains firmware without a separate external program-memory device, while the on-chip SRAM supports working variables and runtime data. The SCI interface can support serial communication with sensors, transceivers, or service equipment, while SPI provides a synchronous interface for compatible peripheral devices. Low-voltage detection and power-on reset support dependable startup behavior in systems whose supply voltage can vary or fluctuate.
Typical uses include appliance controllers, industrial interface modules, motor and valve-control products, measurement instruments, communication modules, and compact embedded systems with human-machine interfaces. A designer can use the SCI connection for a point-to-point control link or SPI for a short-distance peripheral bus, provided the attached devices use compatible electrical and protocol settings.
PCB design should preserve short, stable paths for the MCU supply and ground pins and provide the decoupling and clock components required by the manufacturer application information. Before finalizing a board, use the manufacturer pin-description and connection tables to assign every LQFP pad, including programming, reset, and unused pins. Validate the intended temperature grade and full operating voltage range during design verification.
This page consolidates the core memory, speed, package, interface, and environmental characteristics of the MC9S08RG60CFJ with practical application guidance, verified listing information, and a clear assessment of drop-in replacement availability. It is intended to help engineers identify whether this legacy S08 controller meets their firmware, interface, footprint, and environmental requirements before committing to a design.
Alternatives de remplacement direct pour MC9S08RG60CFJ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesMC9S08RG60CFJ Valeurs maximales et caractéristiques électriques
| Product Type | 8-bit S08 Flash Microcontroller |
| Maximum CPU Frequency | 8 MHz |
| Processor Core | 8-bit S08 |
| Flash Memory | 60 KB (60K x 8) |
| RAM | 2 KB (2K x 8) |
| Serial Connectivity | SCI and SPI |
| Boîtier | 32-LQFP (7 x 7 mm) |
| Type de montage | Surface Mount |
| Température de fonctionnement | -40°C to +85°C |
| System Protection Features | Low-Voltage Detection and Power-On Reset |
Guide de configuration des broches du MC9S08RG60CFJ 32-lqfp (7 x 7 mm)
Configuration des broches du MC9S08RG60CFJ (boîtier 32-lqfp (7 x 7 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour MC9S08RG60CFJ.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MC9S08RG60CFJ convient pour 6 applications: Appliance Control, Industrial Sensor Interface, Motor and Valve Controller, Measurement Instrument, Communication Module, Embedded Interface Module.
Appliance Control
The MC9S08RG60CFJ fits appliance controllers that need local decision-making, nonvolatile configuration storage, and serial communication with sensors or a user interface. Its 8 MHz S08 core provides useful processing speed for motor sequencing, button logic, timers, and state-machine control, while the 60 KB Flash capacity accommodates a substantially larger firmware program than minimal 8-bit controllers. SCI or SPI can connect to an encoder, temperature sensor, display module, or service interface without requiring a separate communications processor. The 32-LQFP 7 x 7 mm package also preserves board area, although designers should follow the manufacturer grounding and decoupling recommendations.
Industrial Sensor Interface
The MC9S08RG60CFJ is suitable for a compact industrial interface that gathers measurements and converts them into control commands. The 8-bit processor can execute calibration logic, filtering, threshold management, diagnostics, and protocol handling, while 2 KB of RAM accommodates working variables without forcing a larger memory architecture. SCI can support a point-to-point sensor link, and SPI can connect to compatible acquisition devices over short PCB traces. Its -40°C to +85°C rating is useful for equipment operating across a broad industrial-temperature range, provided enclosure temperature and conducted heat remain within the device limits.
Motor and Valve Controller
The MC9S08RG60CFJ can serve as the supervisory controller in a motor or valve subsystem where deterministic timing, local interlocks, and remote diagnostics are required. Its 8 MHz S08 core is appropriate for pulse-width control, step sequences, timeout handling, fault flags, and communication tasks. The 60 KB Flash program area allows structured control code plus calibration tables, and SCI can report operating state to a higher-level controller. Because the MCU does not directly specify a motor-driver interface or drive stage, it should be paired with a suitable driver and its protection and timing requirements verified in the complete circuit.
Measurement Instrument
The MC9S08RG60CFJ fits measurement products that need a compact controller for sensor conditioning support, calibration, display updates, and data transfer. Its 8-bit architecture can execute control loops and instrument state management, while 60 KB Flash provides room for application code and stored configuration. SCI is useful for laboratory instruments or service equipment, and SPI can serve compatible converters, memories, or display drivers. The -40°C to +85°C range supports many professional and industrial products, but the final accuracy and stability depend on the external analog front end, sensor selection, layout, and calibration strategy.
Communication Module
The MC9S08RG60CFJ can form the protocol-processing core of a compact communications module that bridges sensors or embedded controllers to a host interface. Its SCI channel can implement an asynchronous communications protocol, while SPI can connect a companion radio, transceiver, or storage device. The 8 MHz core is suitable for frame handling, timeout management, status reporting, and configuration, and 60 KB Flash permits a complete embedded protocol stack plus application logic. The module designer must define electrical levels, timing margin, isolation, and firmware timing against the selected external devices.
Embedded Interface Module
The MC9S08RG60CFJ is appropriate for a standalone embedded interface that translates between a host serial link and local discrete functions. The controller can supervise relays, indicators, switches, and sensors while maintaining communication through SCI or SPI. Its compact 32-LQFP footprint reduces the module size, and the 60 KB Flash capacity supports protocol revisions, diagnostics, and configurable behaviors without external program memory. Low-voltage detection and power-on reset improve startup behavior in systems where supply transients are possible. Production designs should verify reset timing, I/O levels, and decoupling against the manufacturer recommendations.
Données de référence d'ingénierie pour MC9S08RG60CFJ — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Brand | NXP Semiconductors |
| Package | 32-LQFP (7 x 7 mm) |
| Processor Architecture | 8-bit S08 |
| Maximum CPU Frequency | 8 MHz |
| Flash Memory | 60 KB (60K x 8) |
| RAM | 2 KB (2K x 8) |
| Serial Connectivity | SCI and SPI |
| Operating Temperature | -40°C to +85°C |
Principaux différenciateurs
- Substantial Flash capacity for an 8-bit controller (vs MC9S08QE32CLCR)
- Eight-megahertz operating speed (vs MC9S08QE32CLCR)
- Compact 32-LQFP implementation (vs MC9S08QE32CLCR)
Notes de conception
Use the manufacturer power-supply connection diagram as the basis for decoupling and grounding. Place each required bypass capacitor directly between its power pin and the nearest appropriate ground reference, then keep the return path short and low impedance. The -40°C to +85°C rating describes environmental operation and does not define the permitted supply-voltage limits, so verify those limits and startup behavior in the manufacturer electrical characteristics before applying the device.
Route the 32-LQFP footprint against the manufacturer package drawing, including pad length, solder-mask clearance, and exposed thermal-pad requirements if applicable. Confirm every pin assignment in the manufacturer pin-description table before releasing artwork. Maintain sensible separation between clock and serial signals and noisy switching nodes, and provide a stable ground reference around the controller to reduce coupled noise on sensitive measurements and communications.
Do not assume that another 32-LQFP S08 controller is interchangeable merely because its package matches. MC9S08RG60CFJ has 60 KB of Flash, 2 KB of RAM, and a maximum frequency of 8 MHz; the MC9S08QE32CLCR comparison candidate has a different memory configuration. Check storage requirements, pin mapping, clock limits, SCI/SPI resources, reset behavior, and temperature grade before reusing an existing PCB.
Place programming, reset, clock, and debug-related components so they remain accessible during board bring-up. Keep the clock path short and follow the manufacturer's recommended configuration when an external crystal or oscillator is used. For systems containing relays, motor drivers, or switching supplies, route high-current and high-dv/dt paths away from the MCU area and establish a deliberate grounding strategy that separates noisy return currents from sensitive signal references.
Informations de conformité
The component is an 8-bit embedded microcontroller rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations should be confirmed from the manufacturer's current compliance documentation.