NXP Semiconductors

MC9S08RG60CFJ - 8-Bit 8MHz 60KB Flash MCU | NXP

部品番号: MC9S08RG60CFJ ✓ 生産中
32-LQFP (7 x 7 mm) Package 8 MHz Speed 60 KB (60K x 8) Memory
MOQ: 1 |

MC9S08RG60CFJ 概要

NXP Semiconductors MC9S08RG60CFJ is an 8-bit S08 microcontroller operating at up to 8 MHz, with 60 KB of Flash memory and 2 KB of RAM in a 32-LQFP 7 x 7 mm package. The MCU combines an 8-bit processor core with SCI and SPI connectivity, low-voltage detection, power-on reset, and an operating-temperature range of -40°C to +85°C. Its 60K x 8 Flash organization makes it suitable for compact embedded-control systems requiring nonvolatile firmware storage and moderate serial communications.

An 8-bit microcontroller is a compact computing platform that integrates a processor core, memory, and peripherals into one semiconductor device. Within the embedded-control hierarchy, the MC9S08RG60CFJ belongs to the S08 family of 8-bit microcontrollers, combining Flash program memory with serial communications and reset functions. This device type is used when a controller must execute control logic, monitor external conditions, and communicate with sensors or other embedded modules without requiring a high-performance processor.

The principal device features include an 8 MHz maximum operating frequency, 60 KB of Flash program memory, 2 KB of SRAM, SCI and SPI serial interfaces, and a compact 32-LQFP package. The 7 x 7 mm package provides a practical board-area reduction for embedded products while exposing 32 pins for power, ground, reset, programming, clock, input, output, and serial-interface functions. Its -40°C to +85°C temperature range supports industrial-temperature product designs.

The S08 architecture is designed for cost-sensitive embedded control rather than high-throughput computation. Flash memory retains firmware without a separate external program-memory device, while the on-chip SRAM supports working variables and runtime data. The SCI interface can support serial communication with sensors, transceivers, or service equipment, while SPI provides a synchronous interface for compatible peripheral devices. Low-voltage detection and power-on reset support dependable startup behavior in systems whose supply voltage can vary or fluctuate.

Typical uses include appliance controllers, industrial interface modules, motor and valve-control products, measurement instruments, communication modules, and compact embedded systems with human-machine interfaces. A designer can use the SCI connection for a point-to-point control link or SPI for a short-distance peripheral bus, provided the attached devices use compatible electrical and protocol settings.

PCB design should preserve short, stable paths for the MCU supply and ground pins and provide the decoupling and clock components required by the manufacturer application information. Before finalizing a board, use the manufacturer pin-description and connection tables to assign every LQFP pad, including programming, reset, and unused pins. Validate the intended temperature grade and full operating voltage range during design verification.

This page consolidates the core memory, speed, package, interface, and environmental characteristics of the MC9S08RG60CFJ with practical application guidance, verified listing information, and a clear assessment of drop-in replacement availability. It is intended to help engineers identify whether this legacy S08 controller meets their firmware, interface, footprint, and environmental requirements before committing to a design.

ドロップイン代替品: MC9S08RG60CFJ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

MC9S08RG60CFJ 最大定格&電気的特性

Product Type 8-bit S08 Flash Microcontroller
Maximum CPU Frequency 8 MHz
Processor Core 8-bit S08
Flash Memory 60 KB (60K x 8)
RAM 2 KB (2K x 8)
Serial Connectivity SCI and SPI
パッケージ 32-LQFP (7 x 7 mm)
実装タイプ Surface Mount
動作温度 -40°C to +85°C
System Protection Features Low-Voltage Detection and Power-On Reset

MC9S08RG60CFJ 32-lqfp (7 x 7 mm) ピン配置ガイド

MC9S08RG60CFJ (32-lqfp (7 x 7 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

MC9S08RG60CFJ の 32-lqfp (7 x 7 mm) パッケージピン配置図

詳細なピン配置データはありません: MC9S08RG60CFJ.

詳細は データシート をご参照ください。

主な用途

MC9S08RG60CFJ の用途: 6 件s: Appliance Control, Industrial Sensor Interface, Motor and Valve Controller, Measurement Instrument, Communication Module, Embedded Interface Module.

🔧

Appliance Control

The MC9S08RG60CFJ fits appliance controllers that need local decision-making, nonvolatile configuration storage, and serial communication with sensors or a user interface. Its 8 MHz S08 core provides useful processing speed for motor sequencing, button logic, timers, and state-machine control, while the 60 KB Flash capacity accommodates a substantially larger firmware program than minimal 8-bit controllers. SCI or SPI can connect to an encoder, temperature sensor, display module, or service interface without requiring a separate communications processor. The 32-LQFP 7 x 7 mm package also preserves board area, although designers should follow the manufacturer grounding and decoupling recommendations.

🏭

Industrial Sensor Interface

The MC9S08RG60CFJ is suitable for a compact industrial interface that gathers measurements and converts them into control commands. The 8-bit processor can execute calibration logic, filtering, threshold management, diagnostics, and protocol handling, while 2 KB of RAM accommodates working variables without forcing a larger memory architecture. SCI can support a point-to-point sensor link, and SPI can connect to compatible acquisition devices over short PCB traces. Its -40°C to +85°C rating is useful for equipment operating across a broad industrial-temperature range, provided enclosure temperature and conducted heat remain within the device limits.

⚡

Motor and Valve Controller

The MC9S08RG60CFJ can serve as the supervisory controller in a motor or valve subsystem where deterministic timing, local interlocks, and remote diagnostics are required. Its 8 MHz S08 core is appropriate for pulse-width control, step sequences, timeout handling, fault flags, and communication tasks. The 60 KB Flash program area allows structured control code plus calibration tables, and SCI can report operating state to a higher-level controller. Because the MCU does not directly specify a motor-driver interface or drive stage, it should be paired with a suitable driver and its protection and timing requirements verified in the complete circuit.

📺

Measurement Instrument

The MC9S08RG60CFJ fits measurement products that need a compact controller for sensor conditioning support, calibration, display updates, and data transfer. Its 8-bit architecture can execute control loops and instrument state management, while 60 KB Flash provides room for application code and stored configuration. SCI is useful for laboratory instruments or service equipment, and SPI can serve compatible converters, memories, or display drivers. The -40°C to +85°C range supports many professional and industrial products, but the final accuracy and stability depend on the external analog front end, sensor selection, layout, and calibration strategy.

🌐

Communication Module

The MC9S08RG60CFJ can form the protocol-processing core of a compact communications module that bridges sensors or embedded controllers to a host interface. Its SCI channel can implement an asynchronous communications protocol, while SPI can connect a companion radio, transceiver, or storage device. The 8 MHz core is suitable for frame handling, timeout management, status reporting, and configuration, and 60 KB Flash permits a complete embedded protocol stack plus application logic. The module designer must define electrical levels, timing margin, isolation, and firmware timing against the selected external devices.

🧩

Embedded Interface Module

The MC9S08RG60CFJ is appropriate for a standalone embedded interface that translates between a host serial link and local discrete functions. The controller can supervise relays, indicators, switches, and sensors while maintaining communication through SCI or SPI. Its compact 32-LQFP footprint reduces the module size, and the 60 KB Flash capacity supports protocol revisions, diagnostics, and configurable behaviors without external program memory. Low-voltage detection and power-on reset improve startup behavior in systems where supply transients are possible. Production designs should verify reset timing, I/O levels, and decoupling against the manufacturer recommendations.

What are the key specifications of MC9S08RG60CFJ that engineers should know?
The MC9S08RG60CFJ is an 8-bit S08 Flash microcontroller with an 8 MHz maximum CPU frequency, 60 KB of program memory, 2 KB of RAM, and SCI and SPI connectivity. It is housed in a 32-LQFP package measuring 7 x 7 mm and is rated for -40°C to +85°C operation. According to the manufacturer datasheet, the device also includes low-voltage detection and power-on reset functions for dependable embedded-system startup and supply monitoring.
Where can I download the MC9S08RG60CFJ datasheet PDF?
The MC9S08RG60CFJ datasheet PDF is available from the NXP manufacturer documentation path linked on this page. The document should be used to confirm the 32-LQFP pin assignments, electrical limits, clock requirements, reset behavior, SCI and SPI interfaces, and programming connections. The documented 8-bit architecture, 8 MHz maximum frequency, 60 KB Flash, and 2 KB RAM make it important to check the manufacturer pin and electrical tables against the intended PCB design.
Where can I find the MC9S08RG60CFJ pinout?
The MC9S08RG60CFJ pinout is documented in the manufacturer datasheet's package and pin-description tables. This device uses a 32-LQFP package with a 7 x 7 mm body, so the board footprint must match all 32 numbered positions. Use the package drawing for pad dimensions and the pin table for signal names. The accessible distributor listing also identifies the part as a 32-LQFP controller, but the manufacturer document remains the authoritative source for individual pin functions.
What is the MC9S08RG60CFJ used for?
The MC9S08RG60CFJ is used for compact embedded-control applications that need an 8-bit processor, nonvolatile firmware storage, and serial connectivity. Typical equipment includes appliance controllers, industrial interface modules, measurement instruments, motor or valve controllers, and communication modules. Its 60 KB Flash supports a substantially larger firmware image than small 8-bit controllers, while SCI and SPI provide options for connecting sensors, transceivers, and other compatible peripherals.
How much memory does the MC9S08RG60CFJ have?
The MC9S08RG60CFJ contains 60 KB of Flash program memory organized as 60K x 8 and 2 KB of RAM organized as 2K x 8. The Flash array retains firmware without requiring a separate external memory chip, while the RAM serves working-data and stack requirements. These capacities place the controller between very small 8-bit devices and larger 16- or 32-bit microcontrollers, making it appropriate for moderate control logic rather than resource-intensive computation.
What clock speed does the MC9S08RG60CFJ support?
The MC9S08RG60CFJ supports a maximum operating frequency of 8 MHz. According to the manufacturer datasheet, the S08 core uses that clock rate for control and peripheral operation. The device is therefore suitable for real-time embedded tasks involving status monitoring, serial protocols, and actuator control, provided firmware execution timing remains within the available CPU budget. The final clock configuration and operating limits should be verified against the electrical characteristics section.
What serial interfaces are available on the MC9S08RG60CFJ?
The MC9S08RG60CFJ includes SCI and SPI serial connectivity. SCI supports asynchronous serial communication with sensors, service interfaces, or transceivers, while SPI provides a synchronous connection for compatible external peripherals. Both interfaces can help reduce the number of discrete components needed by an embedded design. Exact baud-rate ranges, signal mappings, and peripheral operating modes should be selected from the manufacturer interface and electrical tables.
MC9S08RG60CFJ vs MC9S08QE32CLCR — which is better for a new control design?
The MC9S08RG60CFJ is the better fit when a design requires 8 MHz operation and 60 KB of Flash because the MC9S08QE32CLCR is a different S08 device with a lower-memory configuration. Both are associated with 32-LQFP packaging in the available comparison information, but package similarity alone does not establish drop-in compatibility. Firmware architecture, memory size, pin assignments, clock configuration, and peripheral availability must be compared before replacing one with the other.
When should I choose the MC9S08RG60CFJ over another S08 microcontroller?
Choose the MC9S08RG60CFJ when an embedded design benefits from an 8 MHz S08 core, 60 KB of Flash, 2 KB of RAM, and both SCI and SPI in a 32-LQFP package. It is particularly appropriate when firmware size is more important than using the newest 8-bit controller architecture. Select a newer device instead when the application needs substantially greater RAM, faster peripherals, more I/O, or a long-term design program better served by an actively supported family.
Is the MC9S08RG60CFJ suitable for industrial temperature applications?
The MC9S08RG60CFJ is rated for an operating-temperature range of -40°C to +85°C, making it suitable for many industrial-temperature embedded products. That range should be checked against the worst ambient temperature inside the enclosure, heat rise from nearby circuitry, and any temperature variation during operation. It is not described as an AEC-Q100-qualified automotive component, so automotive designs require separate qualification and component-approval review.
What is the best drop-in replacement for the MC9S08RG60CFJ?
No independently verified drop-in replacement has been established for the MC9S08RG60CFJ. A genuine replacement must match the 32-LQFP footprint, preserve pin-to-pin signal assignments, provide at least 60 KB of Flash and 2 KB of RAM, support the required 8 MHz operation and SCI/SPI functions, and satisfy the intended temperature range. The MC9S08QE32CLCR appears in comparison listings, but its lower-memory configuration means it cannot be treated as a drop-in substitute without design verification.
Can MC9S08RG60CFJE replace MC9S08RG60CFJ?
The MC9S08RG60CFJE may share the MC9S08RG60 controller platform and 32-LQFP format, but suffix differences can encode operating-temperature, qualification, or packaging options. The available listing does not provide a complete pin-to-pin and temperature-grade comparison, so substitution should not be based on the suffix alone. Confirm the ordering information, pin descriptions, temperature range, qualification status, and supply format in the manufacturer documentation before treating it as a drop-in replacement.
What is the best NXP equivalent for the MC9S08RG60CFJ?
The closest confirmed NXP-family starting point is another MC9S08RG60 ordering configuration, but no alternative with a fully verified pin-to-pin, electrical, and temperature-grade match has been established. Within the S08 platform, firmware compatibility and hardware equivalence depend on more than flash capacity. Review the manufacturer ordering table, device differences, package drawings, and pin descriptions. If those match exactly, the candidate may serve as a procurement alternative; otherwise, a board-level redesign may be required.
Where to buy MC9S08RG60CFJ online and what is its lead time?
Use the Request a Quote form on this page to ask about MC9S08RG60CFJ availability, current lead time, minimum order quantity, and volume pricing. Current listings show the device in an S08 8-bit, 8 MHz, 60 KB Flash configuration with a 32-LQFP package. For production planning, request a lead-time statement tied to the exact suffix and package because stock levels and delivery schedules can change independently for legacy-orderable components.
What is the price of MC9S08RG60CFJ and is it in stock?
Use the Request a Quote form on this page for the current MC9S08RG60CFJ unit price and stock position. The product page manages pricing and availability dynamically because component quotations, package demand, and market conditions can change. For a new or production design, include the required quantity, package, date code requirements, and target delivery schedule in the request so the supplier can confirm the exact MC9S08RG60CFJ ordering configuration.
How should MC9S08RG60CFJ power and decoupling be designed?
Follow the manufacturer application and electrical requirements for supply decoupling, grounding, and clock stability. Place the required input and bypass capacitors close to their designated pins, provide a low-impedance return path for ground connections, and keep sensitive serial and clock routing away from noisy switching nodes. Exact capacitor values, allowable ESR, startup timing, and supply limits must come from the manufacturer datasheet rather than general MCU design rules.

エンジニアリング参考データ: MC9S08RG60CFJ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the MC9S08RG60CFJ when a legacy or cost-sensitive embedded design requires an 8-bit S08 controller with up to 8 MHz operation, 60 KB of Flash, 2 KB of RAM, SCI and SPI connectivity, and a compact 32-LQFP footprint. It is especially suitable for appliance controls, industrial interfaces, instrumentation, and compact protocol modules where existing S08 firmware or board designs already use this device. MC9S08QE32CLCR may be considered for a different S08 design, but its lower-memory configuration makes it unsuitable as a simple replacement for firmware requiring 60 KB of storage. No alternative has been verified as a true drop-in substitute. For new products with greater RAM, faster peripherals, more I/O, or a broader roadmap, evaluate a newer 8-bit family instead of assuming that package similarity guarantees compatibility.

代替品との比較

パラメータ この製品
Brand NXP Semiconductors
Package 32-LQFP (7 x 7 mm)
Processor Architecture 8-bit S08
Maximum CPU Frequency 8 MHz
Flash Memory 60 KB (60K x 8)
RAM 2 KB (2K x 8)
Serial Connectivity SCI and SPI
Operating Temperature -40°C to +85°C

主な差別化要因

  • Substantial Flash capacity for an 8-bit controller (vs MC9S08QE32CLCR)
  • Eight-megahertz operating speed (vs MC9S08QE32CLCR)
  • Compact 32-LQFP implementation (vs MC9S08QE32CLCR)

設計ノート

Use the manufacturer power-supply connection diagram as the basis for decoupling and grounding. Place each required bypass capacitor directly between its power pin and the nearest appropriate ground reference, then keep the return path short and low impedance. The -40°C to +85°C rating describes environmental operation and does not define the permitted supply-voltage limits, so verify those limits and startup behavior in the manufacturer electrical characteristics before applying the device.

Route the 32-LQFP footprint against the manufacturer package drawing, including pad length, solder-mask clearance, and exposed thermal-pad requirements if applicable. Confirm every pin assignment in the manufacturer pin-description table before releasing artwork. Maintain sensible separation between clock and serial signals and noisy switching nodes, and provide a stable ground reference around the controller to reduce coupled noise on sensitive measurements and communications.

Do not assume that another 32-LQFP S08 controller is interchangeable merely because its package matches. MC9S08RG60CFJ has 60 KB of Flash, 2 KB of RAM, and a maximum frequency of 8 MHz; the MC9S08QE32CLCR comparison candidate has a different memory configuration. Check storage requirements, pin mapping, clock limits, SCI/SPI resources, reset behavior, and temperature grade before reusing an existing PCB.

Place programming, reset, clock, and debug-related components so they remain accessible during board bring-up. Keep the clock path short and follow the manufacturer's recommended configuration when an external crystal or oscillator is used. For systems containing relays, motor drivers, or switching supplies, route high-current and high-dv/dt paths away from the MCU area and establish a deliberate grounding strategy that separates noisy return currents from sensitive signal references.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The component is an 8-bit embedded microcontroller rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations should be confirmed from the manufacturer's current compliance documentation.

データ検証日: 2026-11-15 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MC9S08RG60CFJ datasheet MC9S08RG60CFJ pinout MC9S08RG60CFJ datasheet pdf MC9S08RG60CFJ specifications MC9S08RG60CFJ equivalent MC9S08RG60CFJ replacement MC9S08RG60CFJ cross reference MC9S08RG60CFJ footprint MC9S08RG60CFJ price MC9S08RG60CFJ stock NXP MC9S08RG60CFJ MC9S08RG60CFJ 32-LQFP pinout MC9S08RG60CFJ application circuit MC9S08RG60CFJ vs MC9S08QE32CLCR

関連部品&用語

NXP Semiconductors Motorola MC9S08RG60CFJ MC9S08RG60CFJE MC9S08QE32CLCR S08 8-bit microcontroller Flash memory static RAM SCI SPI embedded control 32-LQFP LQFP package family surface-mount device 7 x 7 mm package 8 MHz processor low-voltage detection power-on reset appliance controller industrial interface instrumentation Motorola S08 microcontroller
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示