MCF52221CAE66 - 66MHz 128KB Flash 32-Bit MCU | NXP
Référence : MCF52221CAE66 ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $18.9756 | $18,98 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
MCF52221CAE66 Présentation
A microcontroller is an integrated circuit that combines a processor core, memory, peripherals, and I/O in one package. The ColdFire V2 core provides the instruction-processing foundation, while Flash retains embedded firmware in nonvolatile memory. USB full-speed OTG expands connectivity options for host, device, and portable USB applications. Within the device hierarchy, this MCU is a 32-bit microcontroller, a ColdFire MCU, and a semiconductor component designed for embedded control systems.
The primary verified characteristics are a 66MHz operating frequency, 128KB organized as 128K × 8 Flash, 32-bit architecture, and 64-LQFP package. DigiKey describes the device as a ColdFire V2 MCF5222x MCU, while Mouser identifies the USB full-speed OTG feature. The 10mm × 10mm LQFP format supports surface-mount assembly and is suitable for compact embedded-control equipment.
Technical evaluation should include clocking, memory map, USB electrical behavior, power requirements, peripheral availability, pin multiplexing, and software compatibility. The available snippets confirm the core frequency, Flash size, package, and USB feature, but they do not provide a complete pin list, RAM size, voltage range, temperature range, or peripheral inventory. Those values must be confirmed in the manufacturer datasheet before schematic capture or production release.
Typical uses for this family include industrial control, USB-connected embedded equipment, data acquisition, and communication-oriented control systems. The MCF52221CAE66 is most appropriate when firmware needs deterministic 32-bit processing, local nonvolatile program storage, and USB connectivity without a separate host processor.
A key design consideration is lifecycle planning. NXP's product page marks MCF52221CAE66 as End of Life, so new production use should be approved against the manufacturer product-change and purchasing information. Prototype or repair demand may still exist, but long-term sourcing should include roadmap review, last-time-buy assessment, and software maintenance planning.
This page combines the verified product summary, lifecycle information, sourcing context, and engineering cautions with the NXP part page and distributor records. It does not invent missing electrical or pin-level data; consult the manufacturer datasheet and PCN before design release.
Alternatives de remplacement direct pour MCF52221CAE66 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MCF52221CAE66 (même facteur de forme et même empreinte) — différant par Package, Flash Memory, Product Type, Maximum Clock Frequency, Architecture.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesMCF52221CAE66 Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit microcontroller |
| Processor Core | ColdFire V2 |
| Maximum Stated Frequency | 66 MHz |
| Family Performance | Up to 76 MIPS at 80 MHz |
| Flash Memory | 128KB (128K × 8) |
| Architecture | 32-bit ColdFire RISC |
| USB Connectivity | USB full-speed OTG |
| Boîtier | 64-LQFP (10mm × 10mm) |
| Nombre de broches | 64 pins |
| Type de montage | Surface mount |
| Statut du cycle de vie | End of Life |
Guide de configuration des broches du MCF52221CAE66 64-lqfp (10mm × 10mm)
Configuration des broches du MCF52221CAE66 (boîtier 64-lqfp (10mm × 10mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour MCF52221CAE66.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MCF52221CAE66 convient pour 6 applications: Legacy USB Embedded Control, Industrial Data Acquisition, USB Peripherals and Dongles, Communication Gateways, Programmable Automation Controllers, Service Equipment Maintenance.
Legacy USB Embedded Control
The MCF52221CAE66 fits legacy USB embedded-control equipment that already targets the ColdFire V2 architecture and requires a 66MHz processor with USB full-speed OTG. It can manage device control, protocol handling, and local firmware execution in one 64-LQFP device while retaining 128KB of Flash. The main advantage is board and software continuity for an established platform. The trade-off is its End of Life designation, which makes supply planning and firmware maintenance more important than for an active MCU.
Recommandé
Industrial Data Acquisition
For an existing industrial acquisition controller, the MCF52221CAE66 provides a 32-bit ColdFire V2 processing core, 66MHz frequency, and 128KB Flash for local program storage. USB full-speed OTG can support a host-side data path where system requirements permit. Its suitability for a new industrial product depends on confirming supply voltage, temperature range, isolation, analog interfaces, and qualification. Because the MCU is End of Life, it is best treated as a maintenance or legacy-platform choice.
Recommandé
USB Peripherals and Dongles
The MCF52221CAE66 can serve as the controller inside a USB peripheral or dongle when an established design requires ColdFire V2 software compatibility and a 66MHz execution rate. Its 128KB Flash provides local firmware storage, while USB full-speed OTG supports direct connectivity. A replacement must preserve USB device behavior, pin multiplexing, clock configuration, power states, and boot expectations. The 10mm × 10mm 64-LQFP package also demands careful PCB layout and thermal review.
Recommandé
Communication Gateways
A legacy gateway can use the MCF52221CAE66 for protocol translation, status aggregation, and USB-connected configuration when the board is already based on this MCU. The 32-bit ColdFire V2 core runs at 66MHz, and 128KB Flash supports embedded firmware. Integration is practical only after checking available communications peripherals, RAM, interrupt requirements, and USB electrical implementation. For long-life gateway development, an active MCU platform may offer better sourcing despite requiring board and firmware work.
Recommandé
Programmable Automation Controllers
The MCF52221CAE66 is applicable to a legacy programmable automation controller when software depends on its ColdFire V2 instruction set and 32-bit processing. At 66MHz with 128KB Flash, it can execute control firmware and coordinate USB service tasks. Engineering review must confirm I/O availability, timing, real-time response, input voltage, and environmental limits because those details are absent from the supplied snippets. Production adoption also requires an explicit lifecycle strategy for the End of Life device.
Recommandé
Service Equipment Maintenance
For maintenance of installed service equipment, MCF52221CAE66 can reproduce the known controller behavior of an original MCF5222x design more effectively than an unrelated MCU with different peripherals or software model. Its 66MHz ColdFire V2 core, 128KB Flash, and USB full-speed OTG match the verified device identity. A repair decision should first compare markings, package, firmware, and board revision. Distributor stock may assist urgent repairs, but procurement should record traceability and sourcing risk.
Recommandé
Données de référence d'ingénierie pour MCF52221CAE66 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Brand | NXP Semiconductors |
| Package | 64-LQFP (10mm × 10mm) |
| Processor Core | ColdFire V2 |
| Operating Frequency | 66 MHz |
| Flash Memory | 128KB (128K × 8) |
| USB Connectivity | USB full-speed OTG |
| Architecture | 32-bit ColdFire RISC |
| Lifecycle Status | End of Life |
Principaux différenciateurs
- Legacy ColdFire V2 compatibility (vs Generic 32-bit 66MHz MCU)
- Integrated USB full-speed OTG (vs MCF52213AE50)
- Defined Flash configuration (vs Generic 128KB Flash MCU)
- Legacy board continuity (vs MCF52236AF50)
Notes de conception
Do not treat a similar clock speed or Flash size as proof of replacement. Validate the 64-LQFP pinout, alternate-function mapping, USB signals, power pins, boot configuration, clocking, memory map, and peripheral electrical limits. The verified snippets do not provide a complete pin list, so schematic and firmware decisions must use the applicable NXP MCF5222x documentation.
Confirm the supported supply range, decoupling requirements, I/O voltage domains, USB transceiver limits, and maximum pin loading from the manufacturer datasheet before layout. Those values are not present in the supplied snippets and must not be inferred from the 3.3V-class association of legacy ColdFire devices. Include appropriate local supply filtering and USB signal protection only after confirming the official requirements.
Design the 64-LQFP footprint and routing from the official package drawing, not from a generic LQFP library. Check pad dimensions, pin-1 orientation, solder-mask clearance, and courtyard compatibility. Keep sensitive USB traces controlled and provide clean reference and return paths. Prototype assembly should use an NXP-compatible footprint and inspect joints carefully because fine-pitch package rework can introduce reliability issues.
Plan the End of Life lifecycle before committing new production. Record the exact NXP product-change notices, last-time-buy status, approved suppliers, incoming inspection requirements, and software ownership. The verified distributor references may support repair or limited sourcing, but distributor inventory is not a substitute for a manufacturer roadmap. A redesign to an active MCU may require pin, clock, peripheral, and firmware adaptation.
Informations de conformité
The supplied product and distributor results do not include verified environmental-compliance declarations. NXP marks the part End of Life; review the manufacturer product page and product-change documentation for qualification and material-status information.
