Microchip Technology

MCP3427T-E/MF - 16-Bit Dual-Channel Delta-Sigma ADC | Microchip

Référence : MCP3427T-E/MF ✓ Actif
2.048 V Vdss 10-DFN with exposed pad, 3 x 3 mm Package
MOQ : 1 |

MCP3427T-E/MF Présentation

The Microchip Technology MCP3427T-E/MF is a 16-bit, dual-channel delta-sigma analog-to-digital converter with a 15 SPS conversion rate, two differential inputs, an I2C serial interface, and a 10-pin DFN package measuring 3 x 3 mm. Its on-board precision 2.048 V reference supports a differential input range of ±2.048 V.

A delta-sigma ADC is a type of sigma-delta analog-to-digital converter that uses continuous-time oversampling and digital filtering to provide high-resolution conversion of slowly changing analog signals. Positioned within the ADC > data converter > semiconductor hierarchy, the MCP3427 is designed for precision measurement systems where low noise, simple connectivity, and compact implementation matter more than very high conversion speed.

The MCP3427 provides two differential input channels and up to 16-bit resolution. Differential measurement rejects common-mode voltage and often improves noise performance when the source is centered around the analog ground or midpoint of the selected input range. The integrated 2.048 V reference establishes a convenient full-scale range of ±2.048 V, while the I2C interface allows the converter to connect directly to a host microcontroller or embedded control system.

Internally, the converter uses a sigma-delta modulation and digital-decimation approach to average noise over the selected conversion cycle. The 15 SPS operating rate supports temperature, pressure, load-cell, potentiometer, and other slow-moving physical measurements. Its small DFN package reduces board area, but the exposed thermal pad requires a deliberate PCB thermal and layout implementation.

Typical applications include industrial process monitoring, precision temperature acquisition, pressure and force measurement, low-rate instrumentation, and embedded sensor interfaces. Differential inputs are particularly useful for sensor bridges and low-amplitude signals where common-mode rejection is valuable. The I2C interface also simplifies connection to distributed acquisition systems.

Route analog inputs away from switching nodes and digital clock traces, follow the manufacturer pin and layout guidance, and provide the specified input and reference capacitance close to their associated pins. Confirm the selected conversion rate, gain, and digital filter configuration before filtering the resulting measurements in firmware.

This page combines the manufacturer’s device characteristics, package information, application guidance, structured comparisons, and practical design considerations to support component selection, PCB implementation, and replacement planning.

Alternatives de remplacement direct pour MCP3427T-E/MF — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec MCP3427T-E/MF (même facteur de forme et même empreinte) — différant par Conversion Rate, Differential Input Range, Digital Interface, Input Configuration, Package.

Microchip Technology
Conversion Rate: 15 samples per second
Differential Input Range: +/-2.048 V
Digital Interface: I2C serial interface

MCP3426T-E/MF

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 10-DFN (3x3) with exposed pad
Same 16-bit, 15 SPS family format and 10-DFN footprint; acquisition-channel configuration differs and must be checked.

📋 Alternative de référence (hors catalogue)

MCP3428T-E/MF

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 10-DFN (3x3) with exposed pad
Same 16-bit, 15 SPS family format and 10-DFN footprint; provides 2 additional channels versus the target.

📋 Alternative de référence (hors catalogue)

MCP3425T-E/MF

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 10-DFN (3x3) with exposed pad
Same 15 SPS precision-ADC family and 10-DFN footprint; channel configuration differs from the target's 2 channels.

📋 Alternative de référence (hors catalogue)

MCP3424T-E/MF

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 10-DFN (3x3) with exposed pad
Same 15 SPS ADC-family interface and 10-DFN footprint; lower resolution reduces nominal key-parameter similarity.

📋 Alternative de référence (hors catalogue)

MCP3423T-E/MF

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Microchip Technology
📦 10-DFN (3x3) with exposed pad
18 bit · 2 differential-input channels · 1-channel sigma-delta per differential input channel · 3.75 samples per second · 2.048 V · ±2.048 V · I2C serial interface · 3.3 V to 5 V

Contactez-nous pour le prix

Voir la fiche technique →

MCP3427T-E/MF Valeurs maximales et caractéristiques électriques

Résolution 16 bit
Number of Input Channels 2 channels
Input Configuration 2 differential inputs
Converter Architecture 1 sigma-delta ADC
Conversion Rate 15 samples/s
On-Board Reference Voltage 2.048 V
Differential Input Range ±2.048 V
Digital Interface I2C
Supply Voltage Range 3.3 V to 5 V
Boîtier 10-DFN with exposed pad, 3 x 3 mm
Type de montage Surface mount
Packaging Tape & reel
Output Data Format 16-bit ADC data
Input Type Differential
Converter Type Delta-sigma
Reference Type On-board precision reference

Guide de configuration des broches du MCP3427T-E/MF 10-dfn with exposed pad, 3 x 3 mm

Configuration des broches du MCP3427T-E/MF (boîtier 10-dfn with exposed pad, 3 x 3 mm). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 10-dfn with exposed pad, 3 x 3 mm pour le MCP3427T-E/MF

Aucune donnée de brochage détaillée disponible pour MCP3427T-E/MF.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MCP3427T-E/MF convient pour 6 applications: Precision Temperature Sensing, Industrial Pressure and Force Measurement, Sensor Bridge Acquisition, Low-Rate Instrumentation, Process Monitoring, Precision Potentiometer Readout.

🌡️

Precision Temperature Sensing

The MCP3427T-E/MF fits low-rate temperature acquisition from resistive sensors such as RTDs and thermistors. According to Microchip’s MCP3427 manufacturer product page, the converter provides two differential inputs, up to 16-bit resolution, a 15 SPS conversion rate, and an on-board 2.048 V reference. Place one channel across the bridge or divider and use the second channel for compensation or a reference sensor. Differential excitation and acquisition help reject common-mode voltage and supply variation. The 15 SPS rate is appropriate for thermal signals that change slowly, while the 10-DFN package permits compact multi-sensor acquisition. Use the manufacturer’s recommended input network and filter the converted values to remove residual noise without sacrificing useful thermal response.

🏭

Industrial Pressure and Force Measurement

The MCP3427T-E/MF is appropriate for bridge-based pressure, load, and force measurements where millivolt-level differential signals must be digitized accurately. According to Microchip’s manufacturer product page, the device offers two differential channels, up to 16-bit resolution, a 2.048 V reference, and a 15 SPS conversion rate. A bridge can be excited from a precision source while its differential output is measured, avoiding the large common-mode voltage present at the sensor terminals. The second channel can monitor excitation, temperature, or another low-frequency sensor. Because mechanical forces generally vary much more slowly than 15 samples per second, no high-speed sample-and-hold architecture is required. Validate excitation noise, sensor sensitivity, input filtering, and grounding against the manufacturer’s application guidance.

🧩

Sensor Bridge Acquisition

The MCP3427T-E/MF supports compact bridge-sensor interfaces in industrial monitors and embedded measurement equipment. According to Microchip’s MCP3427 manufacturer documentation, it converts two differential analog inputs at up to 16-bit resolution and 15 samples per second, with a 2.048 V on-board reference. Differential input arrangement reduces sensitivity to shared supply and ground disturbances, which is valuable when a sensor output is much smaller than its common-mode voltage. The device can digitize one bridge while the second channel handles a temperature or supply-tracking signal for compensation. The I2C interface simplifies connection to a controller, and the 10-DFN package leaves board space for signal conditioning. Keep the analog loop compact and route bridge excitation and digital control paths separately to avoid injecting converter noise into the measurement.

🔧

Low-Rate Instrumentation

The MCP3427T-E/MF is useful in portable and bench instrumentation that measures slow analog process variables with limited space. According to Microchip’s manufacturer product page, it combines a 16-bit conversion format, two differential channels, 15 SPS operation, I2C communication, and a 3 x 3 mm 10-DFN package. A process signal can be applied to one input while the other channel measures a reference or auxiliary sensor. The converter’s continuous delta-sigma operation and digital filtering suit stable readings from potentiometers, resistive dividers, and slow sensor outputs rather than waveforms above the audio band. Use the I2C bus for configuration and data retrieval, then perform calibration and linearization in the host controller. Verify filter settling behavior after each conversion so the firmware does not interpret transition data as a valid measurement.

📡

Process Monitoring

The MCP3427T-E/MF can digitize slowly changing industrial process signals such as tank level, valve position, or pressure-setpoint feedback. According to Microchip’s MCP3427 manufacturer page, the ADC offers two differential channels with up to 16-bit resolution and a 15 SPS conversion rate, supported by an on-board 2.048 V reference. These characteristics suit normalized 4-20 mA or resistive sensor interfaces after appropriate conditioning. Differential inputs support rejection of shared noise on paired sensor wiring, while the I2C interface allows periodic reads from an embedded controller. A production design should include input protection, transient filtering, grounding, and calibration against the selected sensor. Use the 10-DFN exposed pad as the manufacturer specifies so the converter maintains reliable thermal performance in enclosed industrial equipment.

🎛️

Precision Potentiometer Readout

The MCP3427T-E/MF can measure slow potentiometer movement or resistive divider output where resolution and repeatability are more important than sampling speed. According to Microchip’s manufacturer product page, the device provides two differential inputs, up to 16-bit resolution, a 15 SPS conversion rate, and an integrated 2.048 V reference. Connect one divider channel to an input and use the second channel for a redundant position sensor, diagnostic divider, or offset measurement. Differential acquisition can reduce errors associated with common supply and reference-node noise, although the input source impedance still needs to meet the converter’s acquisition requirements. Apply the manufacturer’s input-capacitance guidance, avoid long unshielded analog traces, and perform a zero-and-span calibration in firmware to compensate resistor tolerance and mechanical offset.

Récapitulatif des produits recommandés

MCP3426T-E/MF Same-family differential precision ADC Utilisé dans : Precision Temperature Sensing, Sensor Bridge Acquisition, Process Monitoring MCP3428T-E/MF Same-family ADC for additional channels Utilisé dans : Precision Temperature Sensing, Sensor Bridge Acquisition, Process Monitoring MCP3425T-E/MF Same-family bridge-oriented ADC option Utilisé dans : Industrial Pressure and Force Measurement, Low-Rate Instrumentation, Precision Potentiometer Readout MCP3424T-E/MF Lower-resolution same-package acquisition option Utilisé dans : Industrial Pressure and Force Measurement, Precision Potentiometer Readout MCP3423T-E/MF Microchip Technology Utilisé dans : Low-Rate Instrumentation
What are the key specifications of MCP3427T-E/MF?
The MCP3427T-E/MF is a 16-bit, dual-channel differential delta-sigma ADC operating at 15 samples per second with an I2C interface. According to Microchip’s MCP3427 manufacturer product page, it includes an on-board 2.048 V precision reference, supports a ±2.048 V differential input range, and is offered in a compact 10-DFN package measuring 3 x 3 mm. These specifications place it in the low-noise precision-measurement class rather than the high-speed waveform-conversion class.
What is the input voltage range of MCP3427T-E/MF?
The MCP3427T-E/MF accepts a differential input range of ±2.048 V when using its on-board 2.048 V reference. According to Microchip’s MCP3427 manufacturer product page, both analog inputs are differential, allowing each channel to measure the voltage difference between its positive and negative inputs. Designers should also confirm the device’s supported supply range of 3.3 V to 5 V and follow the datasheet’s gain, common-mode, and absolute-maximum input limits when defining the analog front end.
Where to download the MCP3427T-E/MF datasheet PDF?
The authoritative MCP3427 documentation is available through Microchip Technology’s official MCP3427 product page at https://www.microchip.com/en-us/product/MCP3427. Select the datasheet or documentation link for the MCP3427 family, then confirm that the document ordering information matches the 10-DFN, 3 x 3 mm MCP3427T-E/MF configuration. The product page also provides the family description, supported options, and technical documentation needed for design review.
Where can I find the MCP3427T-E/MF pinout?
The MCP3427T-E/MF pin assignment, exposed-pad connection, and recommended land pattern are shown in the manufacturer datasheet and package drawings on Microchip’s official MCP3427 product page. According to Microchip’s MCP3427 documentation, this ordering code uses a 10-DFN package with an exposed pad. Use the package drawing when assigning PCB tracks and confirm the exposed pad’s electrical connection directly against the datasheet pin-description table.
What can replace MCP3427T-E/MF on the same PCB?
The closest same-brand replacements are members of the Microchip MCP342x family that use the 10-DFN footprint, including MCP3426T-E/MF, MCP3428T-E/MF, MCP3425T-E/MF, MCP3424T-E/MF, and MCP3423T-E/MF. These alternatives differ in channel count or resolution rather than offering identical performance. According to the MCP3427 family documentation, MCP3427T-E/MF provides two differential channels at up to 16-bit resolution, so a replacement must be checked for channel count, interface behavior, and acquisition timing.
Is MCP3427T-E/MF suitable for precision sensor measurement?
Yes, the MCP3427T-E/MF is suitable for low-rate precision measurements such as temperature, pressure, force, and resistive sensor bridges. According to Microchip’s manufacturer product page, it offers two differential input channels, up to 16-bit resolution, and a 2.048 V on-board reference. Differential inputs can reduce sensitivity to common-mode voltage, while the 15 SPS rate suits signals that change slowly enough for the converter’s noise-filtering architecture.
MCP3427T-E/MF vs MCP3428T-E/MF: which is better for multichannel sensing?
MCP3427T-E/MF is the better choice for a design requiring two differential measurement channels, while MCP3428T-E/MF is the more relevant candidate when additional channels are required. According to Microchip’s MCP3427 family information, the target is a two-channel, 16-bit delta-sigma ADC with a 15 SPS conversion rate. The package family permits PCB reuse, but software addressing, conversion scheduling, and channel-count requirements must be confirmed before treating either device as a drop-in replacement.
MCP3427T-E/MF vs MCP3426T-E/MF: what is the difference?
Both devices belong to Microchip’s MCP342x precision delta-sigma ADC family and use the same 10-DFN, 3 x 3 mm package class, but the correct choice depends on the required channel and conversion configuration. According to Microchip’s MCP3427 manufacturer documentation, the MCP3427T-E/MF provides two differential channels with up to 16-bit resolution at 15 samples per second. Review the family ordering table before substituting because channel availability and configuration options can determine software and schematic changes.
When should I choose MCP3427T-E/MF instead of MCP3426T-E/MF?
Choose MCP3427T-E/MF when the design specifically requires its two-channel, up-to-16-bit differential conversion configuration and the associated MCP3427 control behavior. According to Microchip’s manufacturer product page, the device combines a 2.048 V on-board reference, ±2.048 V differential range, and 15 SPS conversion rate. Select the family member whose documented channel map and acquisition sequence exactly match the sensor channels, rather than choosing solely by shared package dimensions.
How much power and heat does MCP3427T-E/MF dissipate?
The MCP3427T-E/MF dissipation must be calculated from the actual supply voltage, conversion activity, and output loading because no complete power figure is stated in the product-page summary. According to Microchip’s MCP3427 datasheet guidance, use the specified supply current and operating conditions for the selected configuration. Place the exposed pad over a thermal-via and copper area, and verify junction temperature under worst-case ambient and conversion-rate conditions before production release.
Does MCP3427T-E/MF support automotive applications?
The available ordering information confirms that MCP3427T-E/MF is a 3.3 V/5 V, 10-DFN precision ADC, but an automotive qualification status should not be inferred from that description alone. According to Microchip’s product documentation and ordering information, use the specific temperature grade and qualification markings shown for the ordered device. For safety- or automotive-critical designs, request the applicable qualification documentation directly from Microchip or through the Request a Quote form on this page.
What is the best cross-brand equivalent for MCP3427T-E/MF?
No cross-brand drop-in equivalent has been established for MCP3427T-E/MF. According to the manufacturer’s MCP3427 documentation, the device combines two differential inputs, 16-bit resolution, a 15 SPS conversion rate, a 2.048 V reference, I2C communication, and a 10-DFN footprint with an exposed pad. A valid alternative must match all five of those electrical, digital, timing, and package constraints; functional similarity alone is insufficient for a no-change PCB replacement.
Where to buy MCP3427T-E/MF online?
Use the Request a Quote form on this page to request MCP3427T-E/MF availability, lead time, and an order quotation. According to Microchip’s MCP3427 manufacturer product page, the exact device is the 10-DFN, 3 x 3 mm two-channel 16-bit delta-sigma ADC with I2C and a 2.048 V on-board reference. Include the exact MPN, required quantity, and shipment destination so the quotation can be matched to the correct package and tape-and-reel ordering option.
What is the price of MCP3427T-E/MF?
Submit the Request a Quote form on this page for a current MCP3427T-E/MF quotation. According to Microchip’s MCP3427 manufacturer product page, the component is a 16-bit, two-channel, 15 SPS delta-sigma ADC in a 10-DFN package with I2C and a 2.048 V reference. The quote request should state the required quantity, packaging preference, and delivery location because quotation terms can vary with volume, availability, and logistics requirements.
What is the lead time for MCP3427T-E/MF?
Request the current lead time through the Request a Quote form on this page. According to Microchip’s official MCP3427 product page, MCP3427T-E/MF is the 10-DFN, 3 x 3 mm configuration of a two-channel, 16-bit delta-sigma ADC with differential inputs, I2C, and an on-board 2.048 V reference. Provide the required production quantity and target delivery schedule so manufacturing planning can be based on the current order position.
Is MCP3427T-E/MF in stock?
Request current stock status through the Request a Quote form on this page. According to Microchip’s MCP3427 manufacturer product page, the target is an active 10-DFN ordering configuration for a two-channel, 16-bit, 15 SPS delta-sigma ADC with differential inputs and an I2C interface. Inventory can vary by package, quantity, and shipment destination, so a stock confirmation should explicitly identify MCP3427T-E/MF rather than the wider MCP3427 family.

Données de référence d'ingénierie pour MCP3427T-E/MF — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose MCP3427T-E/MF for compact, low-rate precision acquisition requiring two differential channels, up to 16-bit resolution, I2C communication, and a 2.048 V on-board reference. Choose MCP3426T-E/MF when its documented channel arrangement is a closer fit to the signal set, and choose MCP3428T-E/MF when four channels justify a broader conversion schedule. MCP3425T-E/MF can suit related same-family acquisition needs, while MCP3424T-E/MF and MCP3423T-E/MF are reasonable footprint-oriented choices when lower resolution is acceptable. All listed candidates use the same 10-DFN package family, but a true drop-in decision still requires checking pin functions, I2C addresses, configuration registers, conversion timing, and software support. For mixed-signal designs, prioritize input range, channel count, and acquisition timing over package similarity alone.

Comparaison avec les alternatives

Paramètre Ce produit MCP3426T-E/MF MCP3428T-E/MF MCP3425T-E/MF MCP3424T-E/MF MCP3423T-E/MF
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 10-DFN (3x3) with exposed pad 10-DFN (3x3) with exposed pad 10-DFN (3x3) with exposed pad 10-DFN (3x3) with exposed pad 10-DFN (3x3) with exposed pad 10-DFN (3x3) with exposed pad
Conversion Rate 15 samples/s 15 samples/s 15 samples/s 15 samples/s 15 samples/s 15 samples/s
Digital Interface I2C I2C I2C I2C I2C I2C
Converter Architecture Sigma-delta Sigma-delta Sigma-delta Sigma-delta Sigma-delta Sigma-delta

Principaux différenciateurs

  • Two differential inputs in a compact precision converter (vs MCP3428T-E/MF)
  • 16-bit resolution at a 15 SPS conversion rate (vs MCP3424T-E/MF)
  • Integrated 2.048 V reference with ±2.048 V differential range (vs MCP3426T-E/MF)

Notes de conception

Route the two differential input pairs as tightly coupled traces and place their input components directly beside the corresponding device pins. Keep the analog ground and digital return paths organized so I2C return current does not share the sensitive input return segment. According to Microchip’s MCP3427 layout guidance, the exposed pad is part of the package thermal and electrical implementation; use the manufacturer’s recommended pad and via pattern rather than relying on a generic 10-pin land pattern.

Differential signal lines should have matched impedances and should remain away from switching nodes, clock traces, and high-current return paths. The converter is optimized for slowly changing signals rather than wideband waveform capture, so excessive routing length and mismatched input impedance can create avoidable conversion errors. Use the manufacturer’s input-capacitance and acquisition-settling requirements, and verify filter settling time in firmware before using each conversion result.

Estimated: using a 3.3 V supply at the device’s documented maximum supply current would give a device-level dissipation ceiling of 3.3 V multiplied by that current; the exact numeric result cannot be calculated without the operating-current value for the selected conversion mode. Keep the exposed pad over an uninterrupted copper region with thermal vias, monitor junction temperature under worst-case conditions, and avoid enclosing the assembly without an airflow and thermal assessment.

Do not assume that the on-board 2.048 V reference makes every external source safe to connect directly. Check the differential input range, common-mode limits, absolute maximum ratings, and source impedance in the manufacturer datasheet before applying sensor excitation. Also avoid treating a conversion result as valid before the selected digital filter has settled, and account for offset, gain, and reference error during calibration.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Use the manufacturer’s current product documentation and material declaration for the exact ordering code. Automotive qualification and environmental compliance are not established by the product-page summary.

Données vérifiées le : 2026-11-10 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

MCP3427T-E/MF datasheet MCP3427T-E/MF pinout MCP3427T-E/MF datasheet pdf MCP3427T-E/MF equivalent MCP3427T-E/MF replacement MCP3427T-E/MF price MCP3427T-E/MF stock Microchip MCP3427T-E/MF MCP3427T-E/MF 16 bit ADC MCP3427T-E/MF 10 DFN pinout MCP3427T-E/MF vs MCP3428T-E/MF MCP3427T-E/MF sensor measurement

Composants & termes associés

Microchip Technology MCP3427T-E/MF MCP3426T-E/MF MCP3428T-E/MF MCP3425T-E/MF MCP3424T-E/MF MCP3423T-E/MF MCP3427 analog-to-digital converter ADC delta-sigma ADC sigma-delta modulator precision data converter semiconductor 16-bit resolution 15 samples per second differential input common-mode rejection on-board voltage reference 2.048 V reference I2C 10-DFN package DFN family surface-mount package exposed pad precision sensor measurement process monitoring
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ