MK61FN1M0VMJ15 - 150MHz Cortex-M4 K61 MCU, 1MB Flash | NXP
Référence : MK61FN1M0VMJ15 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $11.19 | $11,19 |
| 10 | $10.5 | $105,00 |
| 100 | $9.4 | $940,00 |
| 500 | $8.65 | $4 325,00 |
| 1 000 | $7.95 | $7 950,00 |
MK61FN1M0VMJ15 Présentation
A microcontroller (MCU) is a single-chip processor integrating a CPU core, memory (flash/RAM), peripherals, and I/O on one die, used to sense, control, and communicate in embedded systems. The MK61 sits within the Cortex-M4 family (ARM Cortex-M -> 32-bit MCU -> microcontroller -> semiconductor), giving engineers deterministic real-time control plus DSP extensions.
Key differentiating specifications include: 1 MB flash, 128 KB SRAM, hardware encryption acceleration (MMCAU), tamper detection, IEEE 1588 Ethernet MAC, USB 2.0 full-speed on-the-go, and anti-tamper pins. The 150 MHz core delivers 1.25 DMIPS/MHz with single-precision FPU for sensor fusion and audio processing. Operating voltage spans 1.71-3.6 V with multiple low-power modes (Run/Wait/Stop/VLPR/VLPS) for battery-friendly designs.
Architecturally, the device pairs the Cortex-M4F core with a high-bandwidth AIPS-Lite bus matrix, dual 16-bit ADCs (up to 1.2 MSPS), DAC, FlexTimer modules, and an integrated PHY-less Ethernet MAC. The on-chip flash accelerator delivers zero-wait-state performance, supporting deterministic 150 MHz code execution.
Typical applications include industrial Ethernet nodes (PROFINET, EtherNet/IP gateways), USB peripherals, secure POS terminals, smart metering, building automation, and anti-tamper security panels. The MMCAU encryption engine and tamper pins make it well suited for payment terminals and metering devices.
When designing with the MK61, ensure PCB layout accommodates the 256-ball MAPBGA escape pattern, observe the 1.71-3.6 V supply range, and route Ethernet differential pairs with controlled impedance per IEEE 802.3.
This page synthesizes distributor pricing, drop-in K6x family alternatives, and practical K61 application notes not found on the manufacturer's parametric page alone.
Alternatives de remplacement direct pour MK61FN1M0VMJ15 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MK61FN1M0VMJ15 (même facteur de forme et même empreinte) — différant par ADC, Ethernet, Package, DAC, Core Architecture.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MK61FX512VMJ15
✅ Remplacement direct✓ En stock
$18.1 / unité
Voir la fiche technique →MK61FN1M0VMJ12
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MK60FN1M0VMJ15
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
PK70FN1M0VMJ15
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MK61FN1M0VMJ15 Valeurs maximales et caractéristiques électriques
| Core Architecture | ARM Cortex-M4F |
| Core Frequency | 150 MHz |
| FPU | Yes (single-precision) |
| DSP Extensions | Yes (single-cycle MAC, SIMD) |
| Flash Memory | 1 MB (1M x 8) |
| SRAM | 128 KB |
| Bus Width | 32-bit |
| Operating Voltage | 1.71 V to 3.6 V |
| Boîtier | 256-MAPBGA (17x17 mm) |
| Température de fonctionnement | -40C to +105C |
| Ethernet | 10/100 MAC (IEEE 1588) |
| USB | USB 2.0 FS OTG x 2 |
| ADC | 2x 16-bit SAR, up to 1.2 MSPS |
| DAC | 12-bit |
| Encryption | MMCAU (AES, DES, SHA) |
| Anti-Tamper Pins | Yes |
| Statut RoHS | Compliant |
Guide de configuration des broches du MK61FN1M0VMJ15 256-mapbga (17x17 mm)
Configuration des broches du MK61FN1M0VMJ15 (boîtier 256-mapbga (17x17 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour MK61FN1M0VMJ15.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MK61FN1M0VMJ15 convient pour 6 applications: Industrial Ethernet Gateways, USB Peripherals and HID Devices, Secure Payment Terminals, Smart Meters and Tamper-Resistant IoT, Building Automation Controllers, Audio Processing and Voice Recorders.
Industrial Ethernet Gateways
The MK61FN1M0VMJ15's integrated IEEE 1588 Ethernet MAC and 150 MHz Cortex-M4F core make it ideal for industrial Ethernet gateways running PROFINET, EtherNet/IP, or Modbus TCP. The hardware MMCAU encryption engine adds security layers required for industrial IoT, while tamper-detection pins protect field-installed devices. The 1 MB flash accommodates full protocol stacks plus application logic, and the wide 1.71-3.6 V supply supports 24 V industrial bus systems via external DC-DC conversion.
Recommandé
USB Peripherals and HID Devices
With two integrated USB 2.0 full-speed on-the-go controllers, the MK61FN1M0VMJ15 supports dual-role USB peripherals such as POS terminals, custom HID devices, and USB-to-serial bridges. The 150 MHz core handles USB stack plus application firmware, and the 128 KB SRAM supports USB buffer management. Hardware encryption (MMCAU) secures USB data transfers, while the 256-MAPBGA package integrates cleanly into compact USB dongle and peripheral designs.
Recommandé
Secure Payment Terminals
The MK61FN1M0VMJ15's hardware MMCAU engine (AES, DES, SHA) and tamper-detection pins make it a strong fit for payment terminals requiring PCI-compliant hardware cryptography. The 150 MHz Cortex-M4F handles encryption, PIN pad scanning, and secure display refresh within tight latency budgets. The 1 MB flash stores the secure bootloader, payment application, and key management libraries, while the wide supply range simplifies integration with battery-backed terminal designs.
Recommandé
Smart Meters and Tamper-Resistant IoT
For smart electricity, gas, and water meters, the MK61FN1M0VMJ15 combines hardware encryption, tamper detection, Ethernet connectivity, and low-power operation. The 16-bit ADC samples metrology signals with high accuracy, while the 1 MB flash stores calibration data and communication stacks. Multiple low-power modes (VLPR, VLPS, Stop) extend battery life in outage reporting, and the wide operating voltage range accommodates direct connection to meter's power supply rails.
Recommandé
Building Automation Controllers
The MK61FN1M0VMJ15 supports building automation controllers (BACnet, KNX, LonWorks gateways) by combining high-performance control loops with industrial connectivity. The 150 MHz Cortex-M4F runs HVAC control algorithms, while Ethernet and USB interfaces support building management system integration. Hardware encryption protects configuration and credential data, and the industrial temperature range (-40C to +105C) ensures reliable operation in unconditioned mechanical rooms.
Recommandé
Audio Processing and Voice Recorders
The MK61FN1M0VMJ15's Cortex-M4F DSP extensions and 150 MHz clock enable real-time audio processing for digital voice recorders, intercoms, and audio mixing applications. The single-precision FPU accelerates FFT and filter computations, while the 128 KB SRAM supports audio buffer management. The dual ADCs sample microphone arrays, and hardware encryption protects stored recordings in voice diary and dictation products where privacy is required.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MK61FN1M0VMJ15 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MK61FX512VMJ15 | MK61FN1M0VMJ12 | PK70FN1M0VMJ15 | MK60FN1M0VMJ15 |
|---|---|---|---|---|---|
| Package | 256-MAPBGA (17x17 mm) | 256-MAPBGA (17x17) - same | 256-MAPBGA (17x17) - same | 256-MAPBGA (17x17) - same | 256-MAPBGA (17x17) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M7 | ARM Cortex-M4F |
| Core Frequency | 150 MHz | 150 MHz | 120 MHz | 150 MHz | 150 MHz |
| Flash Memory | 1 MB | 512 KB | 1 MB | 1 MB | 1 MB |
| SRAM | 128 KB | 128 KB | 128 KB | 256 KB | 128 KB |
| Ethernet | 10/100 MAC (IEEE 1588) | 10/100 MAC (IEEE 1588) | 10/100 MAC (IEEE 1588) | 10/100 MAC (IEEE 1588) | No Ethernet |
| USB | USB 2.0 FS OTG x2 | USB 2.0 FS OTG x2 | USB 2.0 FS OTG x2 | USB 2.0 FS OTG x2 | USB 2.0 FS OTG |
| Encryption Engine | MMCAU (AES/DES/SHA) | MMCAU (AES/DES/SHA) | MMCAU (AES/DES/SHA) | MMCAU (AES/DES/SHA) | No MMCAU |
Principaux différenciateurs
- Combined Ethernet + USB + Hardware Encryption (vs MK60FN1M0VMJ15)
- Double flash vs FX512 variant (vs MK61FX512VMJ15)
- 25% higher clock speed vs J12 variant (vs MK61FN1M0VMJ12)
Notes de conception
The 256-ball MAPBGA package with 1 mm ball pitch requires microvia or HDI PCB technology for clean escape routing. Use at least 4 PCB layers with a dedicated ground plane immediately beneath the BGA. Route high-speed signals (Ethernet, USB) on the top layer with impedance-controlled traces (50 ohm single-ended, 90 ohm differential for Ethernet). Ensure BGA balls have proper reflow profile per NXP recommendations to avoid tombstoning and head-in-pillow defects.
The MK61FN1M0VMJ15 operates from 1.71 V to 3.6 V; place at least 4 decoupling capacitors (100 nF, 1 uF, 4.7 uF, and bulk) close to the VDD/VSS pin groups. Use a dedicated LDO for the analog supply (VDDA) to minimize ADC noise. The integrated voltage regulator requires a 4.7 uF external capacitor on the VCORE pin; do not omit it. Power sequencing is handled internally but ensure the MCU is held in reset until supplies are stable.
Route Ethernet MII/RMII signals with impedance control and length matching. For USB 2.0, route the D+/D- pair as a 90 ohm differential pair with maximum length matching of 2 mm. Keep high-speed traces away from oscillator and switching regulator circuits. Use series termination resistors near the driver for clock and high-speed signal lines above 50 MHz to control ringing.
Estimated: at maximum core frequency (150 MHz) and 3.6 V supply under continuous DSP workload, the MK61FN1M0VMJ15 dissipates approximately 200-300 mW. The 256-MAPBGA package has a typical theta_JA of 25-30 C/W on a 4-layer JEDEC test board, resulting in a junction temperature rise of 5-9 C above ambient. Industrial applications at 105 C ambient require thermal vias beneath the BGA thermal pad and adequate copper pour on internal layers.
Informations de conformité
RoHS compliant per NXP product page. Not AEC-Q100 qualified; for automotive applications consider NXP's S32K or KV automotive MCUs.
