MK61FN1M0VMJ15 - 150MHz Cortex-M4 K61 MCU, 1MB Flash | NXP
料号： MK61FN1M0VMJ15 ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $11.19 | $11.19 |
| 10 | $10.5 | $105.00 |
| 100 | $9.4 | $940.00 |
| 500 | $8.65 | $4,325.00 |
| 1,000 | $7.95 | $7,950.00 |
MK61FN1M0VMJ15 概述
A microcontroller (MCU) is a single-chip processor integrating a CPU core, memory (flash/RAM), peripherals, and I/O on one die, used to sense, control, and communicate in embedded systems. The MK61 sits within the Cortex-M4 family (ARM Cortex-M -> 32-bit MCU -> microcontroller -> semiconductor), giving engineers deterministic real-time control plus DSP extensions.
Key differentiating specifications include: 1 MB flash, 128 KB SRAM, hardware encryption acceleration (MMCAU), tamper detection, IEEE 1588 Ethernet MAC, USB 2.0 full-speed on-the-go, and anti-tamper pins. The 150 MHz core delivers 1.25 DMIPS/MHz with single-precision FPU for sensor fusion and audio processing. Operating voltage spans 1.71-3.6 V with multiple low-power modes (Run/Wait/Stop/VLPR/VLPS) for battery-friendly designs.
Architecturally, the device pairs the Cortex-M4F core with a high-bandwidth AIPS-Lite bus matrix, dual 16-bit ADCs (up to 1.2 MSPS), DAC, FlexTimer modules, and an integrated PHY-less Ethernet MAC. The on-chip flash accelerator delivers zero-wait-state performance, supporting deterministic 150 MHz code execution.
Typical applications include industrial Ethernet nodes (PROFINET, EtherNet/IP gateways), USB peripherals, secure POS terminals, smart metering, building automation, and anti-tamper security panels. The MMCAU encryption engine and tamper pins make it well suited for payment terminals and metering devices.
When designing with the MK61, ensure PCB layout accommodates the 256-ball MAPBGA escape pattern, observe the 1.71-3.6 V supply range, and route Ethernet differential pairs with controlled impedance per IEEE 802.3.
This page synthesizes distributor pricing, drop-in K6x family alternatives, and practical K61 application notes not found on the manufacturer's parametric page alone.
直接替换替代料： MK61FN1M0VMJ15 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： MK61FN1M0VMJ15 （相同外形与封装尺寸） ——差异在于 ADC, Ethernet, Package, DAC, Core Architecture.
快速对比工具——选择替代料号进行并排对比：
MK61FX512VMJ15
✅ 直接替换✓ 有现货
$18.1 / 个
查看数据手册 →MK61FN1M0VMJ12
✅ 直接替换📋 参考替代料（不在目录中）
MK60FN1M0VMJ15
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
PK70FN1M0VMJ15
✅ 直接替换📋 参考替代料（不在目录中）
MK61FN1M0VMJ15 最大额定值与电气特性
| Core Architecture | ARM Cortex-M4F |
| Core Frequency | 150 MHz |
| FPU | Yes (single-precision) |
| DSP Extensions | Yes (single-cycle MAC, SIMD) |
| Flash Memory | 1 MB (1M x 8) |
| SRAM | 128 KB |
| Bus Width | 32-bit |
| Operating Voltage | 1.71 V to 3.6 V |
| 封装 | 256-MAPBGA (17x17 mm) |
| 工作温度 | -40C to +105C |
| Ethernet | 10/100 MAC (IEEE 1588) |
| USB | USB 2.0 FS OTG x 2 |
| ADC | 2x 16-bit SAR, up to 1.2 MSPS |
| DAC | 12-bit |
| Encryption | MMCAU (AES, DES, SHA) |
| Anti-Tamper Pins | Yes |
| RoHS 状态 | Compliant |
MK61FN1M0VMJ15 256-mapbga (17x17 mm) 引脚配置指南
MK61FN1M0VMJ15（256-mapbga (17x17 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： MK61FN1M0VMJ15.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MK61FN1M0VMJ15 适用于 6 应用s: Industrial Ethernet Gateways, USB Peripherals and HID Devices, Secure Payment Terminals, Smart Meters and Tamper-Resistant IoT, Building Automation Controllers, Audio Processing and Voice Recorders.
Industrial Ethernet Gateways
The MK61FN1M0VMJ15's integrated IEEE 1588 Ethernet MAC and 150 MHz Cortex-M4F core make it ideal for industrial Ethernet gateways running PROFINET, EtherNet/IP, or Modbus TCP. The hardware MMCAU encryption engine adds security layers required for industrial IoT, while tamper-detection pins protect field-installed devices. The 1 MB flash accommodates full protocol stacks plus application logic, and the wide 1.71-3.6 V supply supports 24 V industrial bus systems via external DC-DC conversion.
推荐
USB Peripherals and HID Devices
With two integrated USB 2.0 full-speed on-the-go controllers, the MK61FN1M0VMJ15 supports dual-role USB peripherals such as POS terminals, custom HID devices, and USB-to-serial bridges. The 150 MHz core handles USB stack plus application firmware, and the 128 KB SRAM supports USB buffer management. Hardware encryption (MMCAU) secures USB data transfers, while the 256-MAPBGA package integrates cleanly into compact USB dongle and peripheral designs.
推荐
Secure Payment Terminals
The MK61FN1M0VMJ15's hardware MMCAU engine (AES, DES, SHA) and tamper-detection pins make it a strong fit for payment terminals requiring PCI-compliant hardware cryptography. The 150 MHz Cortex-M4F handles encryption, PIN pad scanning, and secure display refresh within tight latency budgets. The 1 MB flash stores the secure bootloader, payment application, and key management libraries, while the wide supply range simplifies integration with battery-backed terminal designs.
推荐
Smart Meters and Tamper-Resistant IoT
For smart electricity, gas, and water meters, the MK61FN1M0VMJ15 combines hardware encryption, tamper detection, Ethernet connectivity, and low-power operation. The 16-bit ADC samples metrology signals with high accuracy, while the 1 MB flash stores calibration data and communication stacks. Multiple low-power modes (VLPR, VLPS, Stop) extend battery life in outage reporting, and the wide operating voltage range accommodates direct connection to meter's power supply rails.
推荐
Building Automation Controllers
The MK61FN1M0VMJ15 supports building automation controllers (BACnet, KNX, LonWorks gateways) by combining high-performance control loops with industrial connectivity. The 150 MHz Cortex-M4F runs HVAC control algorithms, while Ethernet and USB interfaces support building management system integration. Hardware encryption protects configuration and credential data, and the industrial temperature range (-40C to +105C) ensures reliable operation in unconditioned mechanical rooms.
推荐
Audio Processing and Voice Recorders
The MK61FN1M0VMJ15's Cortex-M4F DSP extensions and 150 MHz clock enable real-time audio processing for digital voice recorders, intercoms, and audio mixing applications. The single-precision FPU accelerates FFT and filter computations, while the 128 KB SRAM supports audio buffer management. The dual ADCs sample microphone arrays, and hardware encryption protects stored recordings in voice diary and dictation products where privacy is required.
推荐
推荐产品汇总
工程参考数据： MK61FN1M0VMJ15 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MK61FX512VMJ15 | MK61FN1M0VMJ12 | PK70FN1M0VMJ15 | MK60FN1M0VMJ15 |
|---|---|---|---|---|---|
| Package | 256-MAPBGA (17x17 mm) | 256-MAPBGA (17x17) - same | 256-MAPBGA (17x17) - same | 256-MAPBGA (17x17) - same | 256-MAPBGA (17x17) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M7 | ARM Cortex-M4F |
| Core Frequency | 150 MHz | 150 MHz | 120 MHz | 150 MHz | 150 MHz |
| Flash Memory | 1 MB | 512 KB | 1 MB | 1 MB | 1 MB |
| SRAM | 128 KB | 128 KB | 128 KB | 256 KB | 128 KB |
| Ethernet | 10/100 MAC (IEEE 1588) | 10/100 MAC (IEEE 1588) | 10/100 MAC (IEEE 1588) | 10/100 MAC (IEEE 1588) | No Ethernet |
| USB | USB 2.0 FS OTG x2 | USB 2.0 FS OTG x2 | USB 2.0 FS OTG x2 | USB 2.0 FS OTG x2 | USB 2.0 FS OTG |
| Encryption Engine | MMCAU (AES/DES/SHA) | MMCAU (AES/DES/SHA) | MMCAU (AES/DES/SHA) | MMCAU (AES/DES/SHA) | No MMCAU |
关键差异点
- Combined Ethernet + USB + Hardware Encryption （对比 MK60FN1M0VMJ15)
- Double flash vs FX512 variant （对比 MK61FX512VMJ15)
- 25% higher clock speed vs J12 variant （对比 MK61FN1M0VMJ12)
设计说明
The 256-ball MAPBGA package with 1 mm ball pitch requires microvia or HDI PCB technology for clean escape routing. Use at least 4 PCB layers with a dedicated ground plane immediately beneath the BGA. Route high-speed signals (Ethernet, USB) on the top layer with impedance-controlled traces (50 ohm single-ended, 90 ohm differential for Ethernet). Ensure BGA balls have proper reflow profile per NXP recommendations to avoid tombstoning and head-in-pillow defects.
The MK61FN1M0VMJ15 operates from 1.71 V to 3.6 V; place at least 4 decoupling capacitors (100 nF, 1 uF, 4.7 uF, and bulk) close to the VDD/VSS pin groups. Use a dedicated LDO for the analog supply (VDDA) to minimize ADC noise. The integrated voltage regulator requires a 4.7 uF external capacitor on the VCORE pin; do not omit it. Power sequencing is handled internally but ensure the MCU is held in reset until supplies are stable.
Route Ethernet MII/RMII signals with impedance control and length matching. For USB 2.0, route the D+/D- pair as a 90 ohm differential pair with maximum length matching of 2 mm. Keep high-speed traces away from oscillator and switching regulator circuits. Use series termination resistors near the driver for clock and high-speed signal lines above 50 MHz to control ringing.
Estimated: at maximum core frequency (150 MHz) and 3.6 V supply under continuous DSP workload, the MK61FN1M0VMJ15 dissipates approximately 200-300 mW. The 256-MAPBGA package has a typical theta_JA of 25-30 C/W on a 4-layer JEDEC test board, resulting in a junction temperature rise of 5-9 C above ambient. Industrial applications at 105 C ambient require thermal vias beneath the BGA thermal pad and adequate copper pour on internal layers.
合规信息
RoHS compliant per NXP product page. Not AEC-Q100 qualified; for automotive applications consider NXP's S32K or KV automotive MCUs.
