NXP Semiconductors

MKE04Z8VTG4 - 8KB Cortex-M0+ Automotive MCU | NXP

Référence : MKE04Z8VTG4 ✓ Actif
3.3 V to 5 V Vdss 16-pin TSSOP Package 40 MHz Speed 8 KB Memory
MOQ : 1 |

MKE04Z8VTG4 Présentation

The NXP Semiconductors MKE04Z8VTG4 is an ultra-low-power automotive microcontroller based on the Arm Cortex-M0+ architecture, with 8 KB of flash memory, 1 KB of RAM, integrated timers, and a 16-pin TSSOP package. The manufacturer product page identifies a 40 MHz core speed and positions the device for compact vehicle applications requiring economical embedded control.

A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, and peripherals such as timers and communication interfaces onto one die. The MKE04Z8VTG4 belongs to the Kinetis KE04 sub-family and sits within the broader hierarchy of embedded MCU, 32-bit processor, and automotive semiconductor products. Its compact footprint and resource allocation suit body, convenience, lighting, and auxiliary control modules where a higher-performance MCU would add unnecessary cost or power.

The principal features include 8 KB of flash for firmware, 1 KB of SRAM for working data, an Arm Cortex-M0+ core, and integrated timing peripherals. These resources support periodic sensing, debouncing, control sequencing, and state-machine operation without requiring an external memory interface. The 16-pin TSSOP package also simplifies assembly for designs requiring a compact, leaded surface-mount footprint.

The 32-bit Cortex-M0+ architecture provides efficient handling of control logic while keeping the implementation suitable for cost-sensitive automotive electronics. The MKE04Z8VTG4 designation identifies a specific ordering configuration within the KE04 family, and the product listing describes an automotive MCU with integrated timers. Detailed clock-tree settings, peripheral variants, and electrical limits should be confirmed against the manufacturer datasheet before a new design is released.

Typical uses include automotive switch and relay-control modules, motor-control helpers, illumination controllers, sensor-conditioning nodes, and small body-electronics systems. A timer-based implementation can generate fixed-period control signals, count external events, and coordinate actuator updates while the internal flash stores application firmware and the SRAM retains runtime variables.

Designers should review the pin-description table, recommended operating voltage, clock configuration, and decoupling requirements in the manufacturer datasheet before schematic capture. Because this MCU is intended for vehicle applications, production designs should also confirm environmental qualification, traceability requirements, and the exact suffix coding against their supplier documentation.

This page organizes the manufacturer specifications, source links, application guidance, design considerations, and verified comparison parameters for MKE04Z8VTG4. It also distinguishes confirmed drop-in replacements from broader functional alternatives so engineers can assess PCB compatibility before committing to a sourcing change.

Alternatives de remplacement direct pour MKE04Z8VTG4 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec MKE04Z8VTG4 (même facteur de forme et même empreinte) — différant par Package.

NXP Semiconductors
Package: 32-LQFP (7x7 mm)
Comparer avec MKE04Z8VTG4 →

Aucune alternative de remplacement direct disponible pour ce produit.

Demander des alternatives

MKE04Z8VTG4 Valeurs maximales et caractéristiques électriques

Product Type Automotive 32-bit microcontroller
CPU Architecture Arm Cortex-M0+
Manufacturer Stated Core Speed 40 MHz
Flash Memory 8 KB
RAM 1 KB
Instruction Width 32-bit
Boîtier 16-pin TSSOP
Package Code SOT403-1
Type de montage Surface mount
Integrated Timers Yes
Power Class Ultra-low-power
Tension d'alimentation 3.3 V to 5 V
Automotive Qualification Automotive MCU

Guide de configuration des broches du MKE04Z8VTG4 sot403-1

Configuration des broches du MKE04Z8VTG4 (boîtier sot403-1). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier sot403-1 pour le MKE04Z8VTG4

Aucune donnée de brochage détaillée disponible pour MKE04Z8VTG4.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MKE04Z8VTG4 convient pour 6 applications: Automotive Switch and Relay Control, Vehicle Lighting Controller, Automotive Sensor Interface Node, Small Motor and Actuator Helper, Body Electronics Control Module, Automotive Power Management Controller.

🚗

Automotive Switch and Relay Control

The MKE04Z8VTG4 fits compact vehicle switch and relay-control modules because its Arm Cortex-M0+ core can execute finite-state control logic while integrated timers support debouncing, periodic refresh, and timing sequences. The 8 KB of flash provides room for application firmware, and 1 KB of SRAM can hold counters, state variables, and short diagnostic buffers. A 16-pin TSSOP package also reduces board area compared with many larger leaded packages. The implementation should use timer channels for repeatable actuator timing, read switch states through suitable GPIO paths, and protect each output according to the vehicle load being controlled. Exact pin assignments, external driver requirements, diagnostic behavior, and electrical limits must be taken from the NXP manufacturer documentation.

💡

Vehicle Lighting Controller

The MKE04Z8VTG4 can serve as the control core for a compact automotive lighting module because its integrated timers enable blink, fade-sequence, and duration management while the Cortex-M0+ processor handles operating modes and input validation. The device's 8 KB flash supports a small state machine and configuration parameters, while its 1 KB RAM is suitable for counters and current state tracking. Its 16-pin TSSOP package permits placement close to the output-driver circuitry and reduces PCB footprint in space-constrained lamp modules. The design must confirm whether the MCU directly drives lamps or controls an external transistor stage, and it should add suitable protection for vehicle transients and load current. Pin-level multiplexing and timing behavior should be verified in the manufacturer datasheet.

🧩

Automotive Sensor Interface Node

The MKE04Z8VTG4 is suitable for a small sensor interface node when the node performs local conditioning, thresholding, filtering, and fault reporting rather than high-bandwidth signal processing. Its 40 MHz manufacturer-stated core speed provides ample headroom for straightforward control algorithms, while 8 KB of flash and 1 KB of RAM suit embedded firmware with limited buffering requirements. Integrated timers can establish sensor sampling intervals or time out communication attempts. A practical implementation would translate a simple sensor output into a controlled vehicle-network message and record debounce or plausibility information before signaling an error. The MCU package does not replace signal conditioning or automotive transient protection, so those functions should remain external where required by the interface specification.

🏭

Small Motor and Actuator Helper

The MKE04Z8VTG4 can support a low-complexity actuator helper module that controls direction, timing, or limit switches around a small motor. Its Cortex-M0+ core executes the sequencing logic, while integrated timers provide repeatable pulse generation and motion-duration control. The 8 KB flash stores firmware and operating tables, and 1 KB RAM holds counters and status information without requiring external memory. The 16-pin TSSOP package leaves more board area for the motor driver, current sensing, and protection components. For an automotive installation, the MCU should not be assumed to absorb motor transients directly; power and signal paths need suitable isolation and protection. Confirm the actual GPIO and timer assignments in the NXP datasheet before laying out the PCB.

🔧

Body Electronics Control Module

The MKE04Z8VTG4 fits auxiliary body-electronics tasks that require deterministic timer-based control rather than a high-performance application processor. A Cortex-M0+ core can coordinate multiple discrete inputs and outputs, store configuration in its 8 KB flash, and maintain current state in 1 KB of SRAM. Potential tasks include centralized switch handling, wake-related logic, lamp sequencing, or monitoring of simple electromechanical devices. The compact 16-pin TSSOP package is useful where connector access and PCB area are constrained. Engineers should partition low-power always-on duties from functions requiring higher processing capacity, then verify clock, reset, and peripheral behavior against the exact datasheet. Automotive qualification and production traceability should be confirmed separately for the intended product category.

⚡

Automotive Power Management Controller

The MKE04Z8VTG4 can act as a supervisory controller in a compact automotive power-management module because its timers support sequencing, watchdog-style timing, and periodic rail checks. The Cortex-M0+ processor can combine GPIO monitoring with a state machine, while the 8 KB flash stores configuration and the 1 KB RAM retains operating status. The MCU should generally observe power-good signals and control enable requests rather than carry substantial regulator current itself; external power stages and protection components handle that function. The 16-pin TSSOP footprint permits compact placement beside the power circuitry. Validate input thresholds, supply behavior, reset sources, and timer configuration using the manufacturer datasheet, and treat the product listing's automotive description as the starting point rather than a substitute for full qualification review.

What is the MKE04Z8VTG4?
The MKE04Z8VTG4 is an ultra-low-power NXP automotive microcontroller built around the 32-bit Arm Cortex-M0+ processor core. According to the NXP product page, it provides 8 KB of flash memory, 1 KB of RAM, integrated timers, and a 40 MHz core speed. Its 16-pin TSSOP package and modest memory resources make it appropriate for compact vehicle control modules rather than graphics-intensive or high-compute systems.
What are the key specifications of MKE04Z8VTG4 that engineers should know?
The key MKE04Z8VTG4 specifications are an Arm Cortex-M0+ core, 8 KB of flash, 1 KB of RAM, integrated timers, and a 16-pin TSSOP package. The NXP product page identifies a 40 MHz core speed, while a distributor listing displays 48 MHz, so the final clock limit should be checked in the manufacturer datasheet. The device is categorized as an ultra-low-power automotive MCU for compact vehicle applications.
What is the operating voltage of MKE04Z8VTG4?
The MKE04Z8VTG4 operates from 3.3 V to 5 V according to the product listing. This supply range makes it suitable for automotive electronic modules that use conventional low-voltage logic rails. Confirm the exact operating limits, reset behavior, and power-sequencing requirements against the manufacturer datasheet before connecting external sensors, communication transceivers, or actuator drivers to the MCU.
How much memory does the MKE04Z8VTG4 have?
The MKE04Z8VTG4 contains 8 KB of flash memory and 1 KB of RAM. According to the NXP product page, flash stores the application firmware while SRAM provides working space for variables, stack activity, and peripheral data. Designers should size interrupt handlers, buffers, and state structures carefully because 1 KB of SRAM limits simultaneous data-heavy workloads.
What is the MKE04Z8VTG4 pinout and package?
The MKE04Z8VTG4 uses a 16-pin TSSOP package, also identified as SOT403-1. The product listing confirms the package and pin count, but it does not expose a complete pin-description table. Use the pin-assignment section of the NXP MKE04Z8VTG4 datasheet when assigning power, ground, reset, clock, programming, and peripheral signals, and preserve the package orientation shown by the manufacturer land pattern.
Where can I download the MKE04Z8VTG4 datasheet PDF?
The official MKE04Z8VTG4 documentation is available through the NXP product page at https://www.nxp.com/part/MKE04Z8VTG4. The page links to manufacturer documentation for the Kinetis KE04 device, while the NXP page and distributor resources provide additional access to the datasheet. Use the NXP copy as the controlling reference for pin assignments, electrical characteristics, clock settings, and qualification information.
Is the MKE04Z8VTG4 suitable for automotive applications?
The MKE04Z8VTG4 is specifically presented by NXP as an ultra-low-power automotive MCU with integrated timers for vehicle applications. Its Arm Cortex-M0+ core, 8 KB of flash, and 1 KB of RAM suit compact control tasks such as switching, sensing, lighting, or auxiliary actuator management. Before production release, verify the exact automotive qualification and environmental requirements in the manufacturer documentation.
What can replace the MKE04Z8VTG4?
A confirmed drop-in replacement must use the same 16-pin TSSOP footprint, preserve pin-to-pin compatibility, and provide comparable memory and timing resources. The MKE04Z8VTG4 cross-reference results do not identify five or more devices meeting all of those requirements. Treat the listed STM32 devices as functional comparison platforms rather than guaranteed replacements, and validate their package, peripheral mapping, and firmware assumptions before substitution.
Is the MKE04Z8VTG4 the same as an STM32 MCU?
The MKE04Z8VTG4 is not automatically interchangeable with an STM32 device merely because both use an Arm Cortex-M0+ core. The MKE04Z8VTG4 uses a 16-pin TSSOP package with 8 KB of flash and 1 KB of RAM, while a cross-reference page also names STM32F070F6P6 and STM32F031F6P6 for comparison. Package size, pin assignment, memory, peripherals, clock tree, and software support must all be checked.
MKE04Z8VTG4 vs STM32F031F6P6 - which is better for a compact control module?
The MKE04Z8VTG4 is the stronger choice when an existing board specifically requires its 16-pin TSSOP footprint, 8 KB of flash, and 1 KB of RAM. The STM32F031F6P6 may be considered when its package, memory, peripherals, and development ecosystem fit the new design. Neither should be selected solely from core architecture; confirm pin compatibility, electrical limits, automotive requirements, and software support.
When should I choose the MKE04Z8VTG4 over a functional alternative?
Choose the MKE04Z8VTG4 when maintaining a 16-pin TSSOP automotive control design and avoiding PCB or firmware changes is the priority. Its confirmed resources include 8 KB of flash, 1 KB of RAM, an Arm Cortex-M0+ core, and integrated timers. Select a different MCU when the alternative offers a needed package, larger memory, a required peripheral, or a better-supported software ecosystem and the board can be redesigned accordingly.
Where can I buy the MKE04Z8VTG4?
Use the Request a Quote form on this page to request current MKE04Z8VTG4 availability, order quantities, and lead time. The manufacturer product page and distributor records identify the part as an NXP automotive microcontroller in a 16-pin TSSOP package. Procurement should confirm the exact MKE04Z8VTG4 suffix, delivery format, production quantity, and traceability requirements before an order is placed.
What is the price of the MKE04Z8VTG4?
Current MKE04Z8VTG4 commercial terms should be obtained through the Request a Quote form on this page. Published summaries may show a starting figure without a qualifying quantity-break schedule, so that figure is not treated as a confirmed unit price. The request should state the required quantity, packaging preference, target date, and whether automotive traceability documentation is required.
What is the lead time for the MKE04Z8VTG4?
The current MKE04Z8VTG4 lead time should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, packaging, inventory position, and automotive traceability requirements. Include a complete BOM revision, annual usage forecast, approved-vendor status, and required delivery date so the supplier can quote the exact MKE04Z8VTG4 configuration.
Is the MKE04Z8VTG4 in stock?
Use the Request a Quote form on this page to check current MKE04Z8VTG4 stock and available order quantity. The part is actively listed by NXP and appears in multiple distributor catalogs, but catalog presence alone does not establish the quantity available for a particular shipment. The quote request should identify the required quantity, package format, date code constraints, and automotive documentation needs.

Données de référence d'ingénierie pour MKE04Z8VTG4 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the MKE04Z8VTG4 when maintaining an existing 16-pin TSSOP automotive board, using an Arm Cortex-M0+ core, and relying on 8 KB of flash, 1 KB of RAM, and integrated timers. It is particularly suitable for compact switch, lighting, sensor-node, actuator-helper, and power-sequencing modules where the modest memory budget matches the control task. Consider STM32F070F6P6 or STM32F031F6P6 when their specific peripherals, memory, package, or software ecosystem provide a clear benefit and the design can accommodate their differences; neither is established as a pin-to-pin replacement by the available comparison records. For applications requiring more flash, more RAM, a larger package, or advanced analog and communications peripherals, evaluate a higher-capacity MCU before finalizing the architecture. Always verify the manufacturer datasheet, pin assignment, automotive qualification, and electrical operating limits for the exact production ordering code.

Comparaison avec les alternatives

Paramètre Ce produit
Manufacturer NXP Semiconductors
Package 16-pin TSSOP (SOT403-1)
CPU Architecture Arm Cortex-M0+
Flash Memory 8 KB
RAM 1 KB
Manufacturer Stated Core Speed 40 MHz
Supply Voltage 3.3 V to 5 V
Integrated Timers Yes
Power Class Ultra-low-power
Application Category Automotive MCU

Principaux différenciateurs

  • Confirmed 16-pin automotive MCU positioning (vs STM32F031F6P6)
  • NXP-specific Kinetis KE04 family (vs STM32F070F6P6)
  • Compact leaded TSSOP implementation (vs STM32F031F6P6)

Notes de conception

Decouple each supported supply rail close to the corresponding package pins using the capacitance and placement guidance in the NXP datasheet. The MKE04Z8VTG4 is identified as an ultra-low-power automotive MCU, so clean local supply reduces noise injected into timer-based control and communication circuitry. Account for vehicle-battery transients, load-dump exposure, and any external regulator startup behavior in the complete power path rather than treating the nominal 3.3 V to 5 V range as the entire system design requirement.

Follow the manufacturer TSSOP land pattern and keep the orientation marker consistent with the package drawing. Route oscillator, reset, programming, and high-speed communication nets away from noisy power-stage nodes, while placing bulk and high-frequency bypass components near their associated pins. Because the package has only 16 pins, confirm every required peripheral function and multiplexing option before committing the schematic; a pin conflict may otherwise require a package change.

Do not select an alternative solely because it uses an Arm Cortex-M0+ core. MKE04Z8VTG4 replacement candidates must also match the 16-pin TSSOP footprint, pin functions, memory configuration, clock behavior, timer resources, electrical limits, and automotive requirements. The STM32F070F6P6 and STM32F031F6P6 names found in comparison material are functional references, not confirmed drop-in substitutes. Validate programming, reset, and peripheral migration in hardware before production use.

Keep clock and reset nets short and route them away from switch-node and motor-drive paths. For externally sensed vehicle signals, use the appropriate input filtering and protection arrangement before connecting them to GPIO pins; the MCU's internal features do not replace overvoltage, reverse-polarity, or transient protection. If timer inputs count noisy events, debounce in firmware or hardware while confirming that the peripheral input can count the selected signal level and frequency.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The NXP product page identifies the device as an automotive MCU, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were found in the referenced product text.

Données vérifiées le : 2026-11-10 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

MKE04Z8VTG4 datasheet MKE04Z8VTG4 pinout MKE04Z8VTG4 datasheet pdf MKE04Z8VTG4 equivalent MKE04Z8VTG4 replacement MKE04Z8VTG4 cross reference MKE04Z8VTG4 price MKE04Z8VTG4 stock NXP MKE04Z8VTG4 MKE04Z8VTG4 TSSOP16 pinout MKE04Z8VTG4 automotive MCU MKE04Z8VTG4 vs STM32F031F6P6

Composants & termes associés

NXP Semiconductors MKE04Z8VTG4 Kinetis KE04 Arm Cortex-M0+ ARM Cortex-M0+ STM32F070F6P6 STM32F031F6P6 32-bit microcontroller embedded microcontroller microcontroller IC semiconductor 8 KB flash memory 1 KB SRAM integrated timers 16-pin TSSOP SOT403-1 surface-mount package ultra-low-power MCU automotive electronics vehicle control module RoHS REACH AEC-Q100
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ