Texas Instruments

MSP430F5517IPN - 25MHz 16-Bit USB MCU | Texas Instruments

Référence : MSP430F5517IPN ✓ Actif
80-pin LQFP (PN), 12 mm x 12 mm Package 25 MHz Speed 96 KB Memory
MOQ : 1 |

MSP430F5517IPN Présentation

Texas Instruments MSP430F5517IPN is a 25 MHz, 16-bit mixed-signal microcontroller with 96 KB Flash memory, 6 KB SRAM, an integrated USB interface, and an 80-pin LQFP (PN) package. It combines an MSP430 RISC CPU, a 32-bit hardware multiplier, comparator, DMA controller, timers, and UART, SPI, and I2C serial interfaces in one mixed-signal MCU.

An MCU is a programmable semiconductor that integrates a CPU, memory, and peripherals into a single device. The MSP430F5517 belongs to the MSP430 family of low-power RISC microcontrollers and is positioned between a basic embedded controller and a more complex mixed-signal processor. Its 16-bit architecture, extensive serial connectivity, and analog comparator allow it to control and measure systems without requiring multiple discrete peripheral devices.

The device operates at up to 25 MHz and provides 96 KB of Flash for firmware and data, plus 6 KB of SRAM for working memory. Integrated USB PHY support simplifies connected embedded products that need USB communication. The DMA controller transfers data between memory and peripherals without requiring continuous CPU intervention, while the hardware multiplier accelerates arithmetic operations. Comparator and timer resources support signal measurement, event detection, and periodic control functions.

Three peripheral buses broaden its application range: UART supports asynchronous serial communication, SPI supports higher-speed synchronous links to sensors and memory, and I2C supports compact low-speed communication with sensors and other controllers. The combination of USB, serial interfaces, timers, DMA, and analog comparison makes the MCU appropriate for data-acquisition controllers, USB-connected instruments, industrial interfaces, embedded sensing systems, and compact automation equipment.

For USB applications, the device provides the core resources for a bus-powered peripheral while limiting the number of external controllers required. Its integrated USB PHY and 25 MHz CPU support responsive command handling and control-loop execution. In acquisition systems, the comparator and timers can monitor thresholds and events while DMA moves captured or buffered information with reduced processor overhead.

The primary design consideration is PCB layout around the 80-pin LQFP footprint and the 12 mm by 12 mm body. USB routing requires short, controlled-impedance traces, solid ground-plane continuity, and careful separation from switching or high-current paths. External crystal or timing components, bypass capacitors, and USB-series components should follow the connection and layout recommendations in the manufacturer datasheet.

This product page combines the manufacturer’s key device specifications, pin and package information, interface requirements, application guidance, and a verified comparison framework. It also explains the engineering trade-offs involved in USB connectivity, mixed-signal measurement, memory use, and low-power embedded control, helping engineers evaluate the MSP430F5517IPN before schematic and PCB design.

Alternatives de remplacement direct pour MSP430F5517IPN — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec MSP430F5517IPN (même facteur de forme et même empreinte) — différant par Package, Comparator, Hardware Multiplier, CPU Architecture, Core.

Texas Instruments
Package: 80-LQFP (PN), 12 x 12 mm
Comparator: Yes
Hardware Multiplier: Yes
Comparer avec MSP430F5517IPN →
Texas Instruments
Package: 80-LQFP (12x12 mm)
Comparator: Yes
Core: MSP430 CPUXV2, 16-bit
Comparer avec MSP430F5517IPN →

MSP430F5519IPNR

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Texas Instruments
📦 80-LQFP (PN), 12 mm x 12 mm
16-bit MSP430 RISC · 25 MHz · 128KB flash · 8KB · 63 · 1.8 V to 3.6 V · -40°C to +85°C · 80-LQFP (PN), 12 x 12 mm

Contactez-nous pour le prix

Voir la fiche technique →

MSP430F5529IPN

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Texas Instruments
📦 80-LQFP (PN), 12 mm x 12 mm
MSP430 CPUXV2, 16-bit · 25 MHz · 128 KB · 8 KB · 12-bit · Up to 16 external · 4 x 16-bit · USB 2.0 Full-Speed with integrated PHY

Contactez-nous pour le prix

Voir la fiche technique →

MSP430F5517IPN Valeurs maximales et caractéristiques électriques

Product Type 16-bit mixed-signal microcontroller
CPU Architecture MSP430 CPUXV2 RISC architecture
Fréquence d'horloge maximale 25 MHz
Flash Memory 96 KB
SRAM 6 KB
Program Memory Organization 96K x 8 bits
Hardware Multiplier 32-bit
Integrated USB PHY Yes
Comparator Integrated
DMA Controller Integrated
Serial Interfaces UART, SPI, and I2C
Timers Integrated
Boîtier 80-pin LQFP (PN), 12 mm x 12 mm
Terminal Count 80 pins
Temperature Grade Industrial
Plage de température de fonctionnement -40 C to +85 C
Type de montage Surface mount

Guide de configuration des broches du MSP430F5517IPN 80-pin lqfp (pn), 12 mm x 12 mm

Configuration des broches du MSP430F5517IPN (boîtier 80-pin lqfp (pn), 12 mm x 12 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 80-pin lqfp (pn), 12 mm x 12 mm pour le MSP430F5517IPN

Aucune donnée de brochage détaillée disponible pour MSP430F5517IPN.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MSP430F5517IPN convient pour 6 applications: USB-connected measurement instrument, Industrial sensor interface controller, USB data acquisition and logger, Automotive accessory control module, Compact communications controller, Automated test equipment controller.

🖥️

USB-connected measurement instrument

The MSP430F5517IPN fits USB measurement instruments because its 25 MHz CPU handles control logic while the integrated USB PHY provides the device connection. Its 96 KB Flash accommodates instrument firmware, and the 6 KB SRAM supports command buffers and working state. The comparator can perform threshold or event detection, while timers support trigger timing. A practical implementation places the MCU and USB protection components close to the connector, uses a continuous ground plane, and follows the manufacturer’s USB routing and capacitor guidance. This configuration reduces external controller count and simplifies connected laboratory, diagnostic, and bench equipment.

🏭

Industrial sensor interface controller

The MSP430F5517IPN is appropriate for an industrial sensor interface controller that must combine acquisition control with several digital communications paths. The comparator can monitor a sensor-derived threshold, timers can establish measurement and sampling intervals, and DMA can transfer buffers with reduced CPU involvement. UART, SPI, and I2C provide options for local sensors, isolated transceivers, and configuration buses. With 96 KB Flash and 6 KB SRAM, the device can support protocol handling and application logic in one package. The PCB should separate analog comparator routing from USB and digital communications, while grounding and bypassing the MCU according to the manufacturer layout guidance.

📊

USB data acquisition and logger

The MSP430F5517IPN supports USB data logging applications by combining an integrated USB PHY, timers, DMA, and 6 KB of SRAM. Firmware can organize samples, maintain records, and move data over USB without requiring a separate interface controller. The 25 MHz CPU is suited to real-time control of digital measurement sequencing, while the comparator can provide a simple threshold channel alongside external converters. A practical design uses the DMA path for predictable transfer behavior, buffers samples in the available SRAM, and applies flow control at the USB interface. PCB implementation should minimize loop area on USB traces and provide a clean analog reference arrangement for the external measurement circuitry.

🚗

Automotive accessory control module

The MSP430F5517IPN can serve as the central controller in a compact automotive accessory module because it integrates timers, UART, SPI, I2C, USB, DMA, and a comparator in an 80-pin LQFP package. The MCU can manage switches, relays, sensors, and communication tasks while the comparator handles threshold detection for simple analog conditions. Its 25 MHz clock and 96 KB Flash provide capacity for protocol and control software. Designers should keep high-current switching paths physically separated from comparator and communication signals, provide robust decoupling, and validate transient, temperature, and EMC performance against the complete system requirements.

🌐

Compact communications controller

The MSP430F5517IPN is well suited to compact communications equipment requiring USB plus selectable serial interfaces. USB can provide the host connection, while UART supports a legacy serial link and SPI or I2C connects to local transceivers, memories, or configuration devices. The 32-bit hardware multiplier and 25 MHz CPU support protocol and framing tasks, and DMA can move data between memory and peripherals. For a robust implementation, keep each interface’s signal path continuous, provide local bypass capacitance, and use the manufacturer’s timing and pin-multiplexing guidance. Firmware review should verify interrupt priority, buffer occupancy, and USB scheduling against the selected communication protocol.

🔧

Automated test equipment controller

The MSP430F5517IPN can coordinate automated test equipment because its timers, comparator, DMA, USB, and serial interfaces cover sequencing, stimulus control, measurement thresholds, and host communication. A 25 MHz CPU can execute test steps, while 96 KB Flash stores firmware and 6 KB SRAM supports temporary result and command storage. USB provides a direct path to a test host, and SPI, UART, or I2C can connect to programmable sources, relays, or instrumentation. The implementation should isolate comparator inputs from switching nodes, use deterministic timer setup, and account for DMA and USB bandwidth when defining sampling rates. Firmware should include fault handling for disconnected hosts and peripheral timeouts.

Récapitulatif des produits recommandés

MSP430F5517 Base device family used to define the USB mixed-signal MCU platform Utilisé dans : USB-connected measurement instrument, Industrial sensor interface controller, USB data acquisition and logger, Automotive accessory control module, Compact communications controller, Automated test equipment controller MSP430F5517IPNR Tape-and-reel ordering option for the same 80-pin LQFP device Utilisé dans : USB-connected measurement instrument, Industrial sensor interface controller, USB data acquisition and logger, Automotive accessory control module, Compact communications controller, Automated test equipment controller
What are the key specifications of MSP430F5517IPN that engineers should know?
The MSP430F5517IPN is a 25 MHz, 16-bit mixed-signal MCU with 96 KB Flash, 6 KB SRAM, and an 80-pin LQFP package. According to the Texas Instruments product page, it also includes USB, DMA, a comparator, timers, UART, SPI, I2C, and a 32-bit hardware multiplier. These resources make it suitable for connected measurement, industrial-control, and data-acquisition products that need more than a basic embedded controller.
What is the operating frequency of MSP430F5517IPN?
The MSP430F5517IPN operates at up to 25 MHz. Its MSP430 CPUXV2 RISC architecture and 32-bit hardware multiplier support efficient control and arithmetic operations in embedded systems. According to the Texas Instruments MSP430F5517 product page, the device is intended for mixed-signal applications combining digital control, serial communications, USB connectivity, timers, DMA, and comparator-based sensing.
How much memory does MSP430F5517IPN have?
The MSP430F5517IPN contains 96 KB of Flash memory and 6 KB of SRAM. According to the Texas Instruments MSP430F5517 product page, the Flash is organized as 96K x 8 bits for firmware and nonvolatile data, while SRAM supports working data and stack requirements. The 6 KB SRAM should be checked against the most memory-intensive buffers and interrupt-handling workload in the target design.
What interfaces are integrated in MSP430F5517IPN?
The MSP430F5517IPN integrates USB, UART, SPI, and I2C interfaces, along with DMA, timers, and a comparator. According to the Texas Instruments MSP430F5517 product page, USB includes an integrated PHY, while UART supports asynchronous serial links and SPI and I2C support embedded sensors and peripherals. This interface mix supports connected instruments, compact control panels, and industrial sensing nodes.
Where can I download the MSP430F5517IPN datasheet PDF?
The MSP430F5517IPN datasheet is available through the Texas Instruments product page and its part-details page. The manufacturer identifies the document as MSP430F552x, MSP430F551x Mixed-Signal Microcontrollers datasheet (Rev. P), with PDF and HTML viewing options. Use that document for the authoritative pin-description table, electrical characteristics, timing, and USB implementation details.
Where can I find the MSP430F5517IPN pinout?
The MSP430F5517IPN pinout is found in the Texas Instruments MSP430F552x, MSP430F551x Mixed-Signal Microcontrollers datasheet (Rev. P). The device uses an 80-pin LQFP (PN) package measuring 12 mm by 12 mm. Use the pin-description table and package drawing to assign power, ground, reset, analog, USB, and peripheral signals on the PCB.
Is MSP430F5517IPN suitable for USB data-acquisition devices?
The MSP430F5517IPN is suitable for USB-connected data-acquisition devices because it combines a 25 MHz CPU, integrated USB PHY, comparator, timers, and DMA in one package. The comparator can support threshold measurements, while DMA can move data with reduced CPU intervention. For precision acquisition, verify analog front-end requirements separately because the MCU’s comparator is not a substitute for a dedicated high-resolution ADC.
What is the best drop-in replacement for MSP430F5517IPN?
No verified drop-in replacement for MSP430F5517IPN was identified in the manufacturer and cross-reference information reviewed. A valid replacement must match the 80-pin LQFP (PN) footprint, pin assignments, USB implementation, memory resources, clock requirements, and peripheral functions; matching only the clock speed and package is insufficient. Check the manufacturer’s product family and approved BOM alternatives before changing a released design.
Can another MSP430 device replace MSP430F5517IPN without PCB changes?
A candidate MSP430 device can replace MSP430F5517IPN without PCB changes only after its pinout and electrical functions are verified in the manufacturer datasheet. The target uses an 80-pin LQFP (PN) package and includes USB, DMA, a comparator, timers, UART, SPI, I2C, 96 KB Flash, and 6 KB SRAM. No pin-compatible alternative was confirmed, so PCB reuse should not be assumed.
MSP430F5517IPN vs a generic 32-bit MCU - which is better for low-power control?
The MSP430F5517IPN is generally preferable when a compact mixed-signal controller needs USB, serial connectivity, DMA, timers, and comparator functions in a 16-bit architecture. A 32-bit MCU may be preferable for workloads requiring a larger address space, larger data sets, or more complex operating-system support. The choice should follow memory use, interrupt load, interface requirements, power budget, and software ecosystem rather than processor-word length alone.
When should I choose MSP430F5517IPN instead of a smaller microcontroller?
Choose MSP430F5517IPN when the design benefits from 96 KB Flash, 6 KB SRAM, integrated USB, three serial interfaces, DMA, a comparator, and a 32-bit hardware multiplier. A smaller MCU can reduce board area and cost when those resources are unnecessary. This device is more appropriate for connected instruments, multi-interface sensors, and industrial controllers that need measurable peripheral and processing capacity.
Is MSP430F5517IPN suitable for industrial temperature environments?
The MSP430F5517IPN is identified as an industrial-temperature-grade part with an operating range of -40 C to +85 C. According to the Texas Instruments ordering information, the IPN configuration uses the LQFP (PN) package. Final system suitability still depends on the enclosure, self-heating, supply tolerance, and the manufacturer’s complete electrical operating limits.
How should USB and mixed-signal signals be routed on an MSP430F5517IPN PCB?
Route USB as a controlled-impedance interface over a continuous ground plane, following the connection, impedance, and via guidance in the Texas Instruments MSP430F552x, MSP430F551x Mixed-Signal Microcontrollers datasheet (Rev. P). Place USB-series and termination components according to the supported topology. Keep switching nodes and high-current paths away from comparator inputs, and provide local bypass capacitors at supply pins to reduce conducted and radiated coupling.
Where to buy MSP430F5517IPN online?
Use the Request a Quote form on this page to request MSP430F5517IPN pricing, stock, lead time, and order details. The form allows a buyer to specify quantity, package quantity, and shipment requirements without relying on a static price. Current commercial terms should be confirmed through the quotation because component availability and lead time can change.
What is the price of MSP430F5517IPN?
Current MSP430F5517IPN pricing is handled through the Request a Quote form on this page. Submit the required quantity and shipment information to obtain a quotation against the exact MSP430F5517IPN ordering code. This avoids publishing a stale figure and lets the order be reviewed for packaging, lead time, and available inventory.
Is MSP430F5517IPN in stock and what is its lead time?
Submit the MSP430F5517IPN quantity and project timing through the Request a Quote form on this page to check current availability and lead time. The industrial-temperature 80-pin LQFP (PN) ordering code is MSP430F5517IPN, so include the complete MPN in the request. Inventory status can change, making a direct quotation the appropriate commercial check.
What can replace MSP430F5517IPN?
No confirmed drop-in replacement for MSP430F5517IPN was identified in the cross-reference information reviewed. Before considering any candidate, verify its 80-pin LQFP (PN) footprint, USB PHY requirements, 16-bit peripheral compatibility, memory capacity, comparator, DMA, timers, UART, SPI, I2C, clocking, and software initialization. A functionally similar MCU is not necessarily a pin-to-pin replacement.

Données de référence d'ingénierie pour MSP430F5517IPN — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose MSP430F5517IPN when a new design needs a 25 MHz, 16-bit mixed-signal MCU with 96 KB Flash, 6 KB SRAM, integrated USB, three serial interfaces, a comparator, timers, DMA, and a hardware multiplier in an 80-pin LQFP package. It is particularly suitable for USB instruments, sensor-interface controllers, compact communications equipment, and automated test systems. A smaller general-purpose MCU may be preferable when USB, analog comparison, DMA, or multiple serial interfaces are unnecessary and board area is the priority. A 32-bit MCU may be preferable for workloads requiring larger memory spaces, extensive data processing, or a different software ecosystem. No verified pin-compatible replacement was identified, so existing PCB reuse should not be assumed. Validate supply voltage, USB implementation, clocking, analog limits, thermal conditions, and software support before finalizing any design.

Comparaison avec les alternatives

Paramètre Ce produit
Product Type 16-bit mixed-signal microcontroller
Maximum Clock Frequency 25 MHz
Flash Memory 96 KB
SRAM 6 KB
CPU Architecture MSP430 CPUXV2 RISC architecture
Hardware Multiplier 32-bit
Integrated USB PHY Yes
Serial Interfaces UART, SPI, and I2C
Peripheral Resources Comparator, DMA, and timers
Package 80-pin LQFP (PN), 12 mm x 12 mm
Brand Texas Instruments

Principaux différenciateurs

  • Integrated multi-interface mixed-signal platform (vs A basic 16-bit general-purpose microcontroller)
  • Substantial integrated memory for connected embedded control (vs A smaller-memory 16-bit microcontroller)
  • Hardware-assisted data movement and arithmetic (vs A microcontroller without DMA or a hardware multiplier)

Notes de conception

Follow the manufacturer USB layout and connection guidance in the MSP430F552x, MSP430F551x Mixed-Signal Microcontrollers datasheet (Rev. P). Keep USB traces short, provide a continuous ground reference, use the specified USB-series component arrangement, and avoid routing the interface across plane splits. Comparator inputs and analog grounds should remain away from USB and high-current switching paths to reduce coupling into threshold measurements.

Place the required bypass capacitors close to the supply and ground pins, with short, low-inductance connections. Confirm the complete supply-voltage operating limits and decoupling values in the manufacturer datasheet before releasing the schematic. Because the MSP430F5517IPN combines USB, analog comparison, timers, and multiple serial interfaces, power planning must include regulator tolerance, startup behavior, USB bus-load demand, and worst-case peripheral activity rather than average current alone.

Do not substitute a microcontroller solely because it also uses an 80-pin LQFP package. A valid replacement must match the exact pin assignments, USB PHY requirements, analog functions, clocking, memory, peripheral multiplexing, and software startup model. Also account for the industrial -40 C to +85 C range, package thermal behavior, and the 12 mm by 12 mm board footprint when considering footprint reuse or assembly changes.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The industrial temperature grade and -40 C to +85 C operating range are confirmed by the ordering information, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was found in the cited manufacturer information.

Données vérifiées le : 2026-11-10 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

MSP430F5517IPN datasheet MSP430F5517IPN specifications MSP430F5517IPN pinout MSP430F5517IPN datasheet pdf MSP430F5517IPN equivalent MSP430F5517IPN replacement MSP430F5517IPN cross reference MSP430F5517IPN footprint MSP430F5517IPN price MSP430F5517IPN stock Texas Instruments MSP430F5517IPN MSP430F5517 USB application circuit

Composants & termes associés

Texas Instruments MSP430F5517IPN MSP430F5517 MSP430 CPUXV2 16-bit RISC microcontroller mixed-signal microcontroller microcontroller embedded controller semiconductor USB Universal Serial Bus UART SPI I2C DMA comparator hardware multiplier MSP430F552x MSP430F551x 80-pin LQFP LQFP package surface-mount package industrial temperature grade embedded data acquisition USB-connected instrumentation
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ