MSP430F5517IPN - 25MHz 16-Bit USB MCU | Texas Instruments
Артикул: MSP430F5517IPN ✓ АктивенMSP430F5517IPN Обзор
An MCU is a programmable semiconductor that integrates a CPU, memory, and peripherals into a single device. The MSP430F5517 belongs to the MSP430 family of low-power RISC microcontrollers and is positioned between a basic embedded controller and a more complex mixed-signal processor. Its 16-bit architecture, extensive serial connectivity, and analog comparator allow it to control and measure systems without requiring multiple discrete peripheral devices.
The device operates at up to 25 MHz and provides 96 KB of Flash for firmware and data, plus 6 KB of SRAM for working memory. Integrated USB PHY support simplifies connected embedded products that need USB communication. The DMA controller transfers data between memory and peripherals without requiring continuous CPU intervention, while the hardware multiplier accelerates arithmetic operations. Comparator and timer resources support signal measurement, event detection, and periodic control functions.
Three peripheral buses broaden its application range: UART supports asynchronous serial communication, SPI supports higher-speed synchronous links to sensors and memory, and I2C supports compact low-speed communication with sensors and other controllers. The combination of USB, serial interfaces, timers, DMA, and analog comparison makes the MCU appropriate for data-acquisition controllers, USB-connected instruments, industrial interfaces, embedded sensing systems, and compact automation equipment.
For USB applications, the device provides the core resources for a bus-powered peripheral while limiting the number of external controllers required. Its integrated USB PHY and 25 MHz CPU support responsive command handling and control-loop execution. In acquisition systems, the comparator and timers can monitor thresholds and events while DMA moves captured or buffered information with reduced processor overhead.
The primary design consideration is PCB layout around the 80-pin LQFP footprint and the 12 mm by 12 mm body. USB routing requires short, controlled-impedance traces, solid ground-plane continuity, and careful separation from switching or high-current paths. External crystal or timing components, bypass capacitors, and USB-series components should follow the connection and layout recommendations in the manufacturer datasheet.
This product page combines the manufacturer’s key device specifications, pin and package information, interface requirements, application guidance, and a verified comparison framework. It also explains the engineering trade-offs involved in USB connectivity, mixed-signal measurement, memory use, and low-power embedded control, helping engineers evaluate the MSP430F5517IPN before schematic and PCB design.
Аналоги без доработки для MSP430F5517IPN — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MSP430F5517IPN (тот же форм-фактор и посадочное место) — отличается по Package, Comparator, Hardware Multiplier, CPU Architecture, Core.
MSP430F5519IPNR
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →MSP430F5529IPN
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →MSP430F5517IPN Максимальные параметры и электрические характеристики
| Product Type | 16-bit mixed-signal microcontroller |
| CPU Architecture | MSP430 CPUXV2 RISC architecture |
| Максимальная тактовая частота | 25 MHz |
| Flash Memory | 96 KB |
| SRAM | 6 KB |
| Program Memory Organization | 96K x 8 bits |
| Hardware Multiplier | 32-bit |
| Integrated USB PHY | Yes |
| Comparator | Integrated |
| DMA Controller | Integrated |
| Serial Interfaces | UART, SPI, and I2C |
| Timers | Integrated |
| Корпус | 80-pin LQFP (PN), 12 mm x 12 mm |
| Terminal Count | 80 pins |
| Temperature Grade | Industrial |
| Диапазон рабочих температур | -40 C to +85 C |
| Тип монтажа | Surface mount |
Руководство по цоколевке MSP430F5517IPN в корпусе 80-pin lqfp (pn), 12 mm x 12 mm
Цоколевка для MSP430F5517IPN (корпус 80-pin lqfp (pn), 12 mm x 12 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MSP430F5517IPN.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MSP430F5517IPN подходит для 6 применениеs: USB-connected measurement instrument, Industrial sensor interface controller, USB data acquisition and logger, Automotive accessory control module, Compact communications controller, Automated test equipment controller.
USB-connected measurement instrument
The MSP430F5517IPN fits USB measurement instruments because its 25 MHz CPU handles control logic while the integrated USB PHY provides the device connection. Its 96 KB Flash accommodates instrument firmware, and the 6 KB SRAM supports command buffers and working state. The comparator can perform threshold or event detection, while timers support trigger timing. A practical implementation places the MCU and USB protection components close to the connector, uses a continuous ground plane, and follows the manufacturer’s USB routing and capacitor guidance. This configuration reduces external controller count and simplifies connected laboratory, diagnostic, and bench equipment.
Рекомендуется
Industrial sensor interface controller
The MSP430F5517IPN is appropriate for an industrial sensor interface controller that must combine acquisition control with several digital communications paths. The comparator can monitor a sensor-derived threshold, timers can establish measurement and sampling intervals, and DMA can transfer buffers with reduced CPU involvement. UART, SPI, and I2C provide options for local sensors, isolated transceivers, and configuration buses. With 96 KB Flash and 6 KB SRAM, the device can support protocol handling and application logic in one package. The PCB should separate analog comparator routing from USB and digital communications, while grounding and bypassing the MCU according to the manufacturer layout guidance.
Рекомендуется
USB data acquisition and logger
The MSP430F5517IPN supports USB data logging applications by combining an integrated USB PHY, timers, DMA, and 6 KB of SRAM. Firmware can organize samples, maintain records, and move data over USB without requiring a separate interface controller. The 25 MHz CPU is suited to real-time control of digital measurement sequencing, while the comparator can provide a simple threshold channel alongside external converters. A practical design uses the DMA path for predictable transfer behavior, buffers samples in the available SRAM, and applies flow control at the USB interface. PCB implementation should minimize loop area on USB traces and provide a clean analog reference arrangement for the external measurement circuitry.
Рекомендуется
Automotive accessory control module
The MSP430F5517IPN can serve as the central controller in a compact automotive accessory module because it integrates timers, UART, SPI, I2C, USB, DMA, and a comparator in an 80-pin LQFP package. The MCU can manage switches, relays, sensors, and communication tasks while the comparator handles threshold detection for simple analog conditions. Its 25 MHz clock and 96 KB Flash provide capacity for protocol and control software. Designers should keep high-current switching paths physically separated from comparator and communication signals, provide robust decoupling, and validate transient, temperature, and EMC performance against the complete system requirements.
Рекомендуется
Compact communications controller
The MSP430F5517IPN is well suited to compact communications equipment requiring USB plus selectable serial interfaces. USB can provide the host connection, while UART supports a legacy serial link and SPI or I2C connects to local transceivers, memories, or configuration devices. The 32-bit hardware multiplier and 25 MHz CPU support protocol and framing tasks, and DMA can move data between memory and peripherals. For a robust implementation, keep each interface’s signal path continuous, provide local bypass capacitance, and use the manufacturer’s timing and pin-multiplexing guidance. Firmware review should verify interrupt priority, buffer occupancy, and USB scheduling against the selected communication protocol.
Рекомендуется
Automated test equipment controller
The MSP430F5517IPN can coordinate automated test equipment because its timers, comparator, DMA, USB, and serial interfaces cover sequencing, stimulus control, measurement thresholds, and host communication. A 25 MHz CPU can execute test steps, while 96 KB Flash stores firmware and 6 KB SRAM supports temporary result and command storage. USB provides a direct path to a test host, and SPI, UART, or I2C can connect to programmable sources, relays, or instrumentation. The implementation should isolate comparator inputs from switching nodes, use deterministic timer setup, and account for DMA and USB bandwidth when defining sampling rates. Firmware should include fault handling for disconnected hosts and peripheral timeouts.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MSP430F5517IPN — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Product Type | 16-bit mixed-signal microcontroller |
| Maximum Clock Frequency | 25 MHz |
| Flash Memory | 96 KB |
| SRAM | 6 KB |
| CPU Architecture | MSP430 CPUXV2 RISC architecture |
| Hardware Multiplier | 32-bit |
| Integrated USB PHY | Yes |
| Serial Interfaces | UART, SPI, and I2C |
| Peripheral Resources | Comparator, DMA, and timers |
| Package | 80-pin LQFP (PN), 12 mm x 12 mm |
| Brand | Texas Instruments |
Ключевые отличия
- Integrated multi-interface mixed-signal platform (против A basic 16-bit general-purpose microcontroller)
- Substantial integrated memory for connected embedded control (против A smaller-memory 16-bit microcontroller)
- Hardware-assisted data movement and arithmetic (против A microcontroller without DMA or a hardware multiplier)
Заметки по проектированию
Follow the manufacturer USB layout and connection guidance in the MSP430F552x, MSP430F551x Mixed-Signal Microcontrollers datasheet (Rev. P). Keep USB traces short, provide a continuous ground reference, use the specified USB-series component arrangement, and avoid routing the interface across plane splits. Comparator inputs and analog grounds should remain away from USB and high-current switching paths to reduce coupling into threshold measurements.
Place the required bypass capacitors close to the supply and ground pins, with short, low-inductance connections. Confirm the complete supply-voltage operating limits and decoupling values in the manufacturer datasheet before releasing the schematic. Because the MSP430F5517IPN combines USB, analog comparison, timers, and multiple serial interfaces, power planning must include regulator tolerance, startup behavior, USB bus-load demand, and worst-case peripheral activity rather than average current alone.
Do not substitute a microcontroller solely because it also uses an 80-pin LQFP package. A valid replacement must match the exact pin assignments, USB PHY requirements, analog functions, clocking, memory, peripheral multiplexing, and software startup model. Also account for the industrial -40 C to +85 C range, package thermal behavior, and the 12 mm by 12 mm board footprint when considering footprint reuse or assembly changes.
Информация о соответствии
The industrial temperature grade and -40 C to +85 C operating range are confirmed by the ordering information, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was found in the cited manufacturer information.