MVF60NS151CMK50 - Vybrid VF6xx Dual-Core A5/M4 MPU, 500MHz | NXP
Référence : MVF60NS151CMK50 ✓ ActifMVF60NS151CMK50 Présentation
An MPU (Microprocessor Unit) is an integrated processor that integrates CPU cores, memory interfaces, and a wide set of peripherals into a single IC. The MVF60NS151CMK50 belongs to the wider category hierarchy: microprocessor -> processor -> system-on-chip -> semiconductor. The Vybrid platform combines application processing with deterministic real-time control, enabling a single-chip architecture for HMI, connectivity, and motor or sensor control in industrial and IoT systems.
Key features of the MVF60NS151CMK50 include up to 1.5 MB of on-chip SRAM, dual USB 2.0 OTG controllers with integrated PHY, dual 10/100 Ethernet controllers with an L2 switch, and a rich suite of communication, connectivity, and HMI interfaces. Hardware security features include anti-clone, anti-tamper, secure boot, and cryptography acceleration. The heterogeneous core pairing allows Linux or a high-level OS on the A5 while the M4 handles real-time tasks under a real-time OS or bare-metal firmware.
The device is fabricated on a low-power CMOS process and supports industrial temperature ranges. Multiple power domains enable portions of the SoC to be powered down independently, optimizing energy efficiency for battery-backed or always-on industrial nodes. The architecture targets applications where deterministic latency for control loops is as critical as GUI, networking, and security performance.
Typical applications include industrial HMI panels, building automation controllers, smart energy gateways, factory automation PLCs, point-of-sale terminals, and medical patient monitoring equipment. The combination of dual Ethernet, dual USB, and a TFT LCD controller makes the part especially suited for connected operator-interface terminals.
Designers should plan PCB layout for a 17x17 mm BGA with 0.8 mm pitch, allocate sufficient decoupling, and review NXP reference designs for power-sequencing of the multiple voltage rails required by the A5 and M4 cores.
This page synthesizes distributor pricing, drop-in alternatives from the Vybrid family, and PCB/thermal design guidance beyond what is printed in the manufacturer datasheet.
Alternatives de remplacement direct pour MVF60NS151CMK50 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MVF60NS151CMK50 (même facteur de forme et même empreinte) — différant par Ethernet, Package, Mounting Type, USB, Core Architecture.
MVF60NS152CMK50
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MVF60NS151CMK40
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MVF60NS151CMK60
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MVF60NN151CMK50
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →MVF50NS151CMK50
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MVF60NS151CMK50 Valeurs maximales et caractéristiques électriques
| Architecture | ARM Cortex-A5 + ARM Cortex-M4 (heterogeneous dual-core) |
| Application Core (Cortex-A5) Max Frequency | 500 MHz |
| Real-Time Core (Cortex-M4) Max Frequency | 167 MHz |
| Core Count | 2 |
| Largeur du bus de données | 32-bit |
| On-Chip SRAM | Up to 1.5 MB |
| Boîtier | 364-LFBGA (17x17 mm) |
| Ball Pitch | 0.8 mm |
| Supply Voltage (Core) | 1.23 V |
| Supply Voltage (I/O) | 3.3 V |
| USB | Dual USB 2.0 OTG with integrated PHY |
| Ethernet | Dual 10/100 Ethernet with L2 switch |
| Security Features | Secure boot, anti-tamper, anti-clone, crypto acceleration |
| Température de fonctionnement | -40C to +85C (industrial) |
| Type de montage | Surface Mount (BGA) |
| Statut RoHS | Compliant |
Guide de configuration des broches du MVF60NS151CMK50 364-lfbga (17x17 mm)
Configuration des broches du MVF60NS151CMK50 (boîtier 364-lfbga (17x17 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour MVF60NS151CMK50.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MVF60NS151CMK50 convient pour 6 applications: Industrial HMI Operator Panels, Building Automation Controllers, Smart Energy Gateways and Data Concentrators, Factory Automation PLCs and Edge Controllers, Point-of-Sale Terminals, Medical Patient Monitoring Equipment.
Industrial HMI Operator Panels
The MVF60NS151CMK50 fits industrial HMI panels because the Cortex-A5 at 500 MHz drives a Qt- or Web-based GUI with sufficient headroom for graphical overlays, while the Cortex-M4 at 167 MHz handles deterministic touch sampling, keypad debouncing, and backlight control. The integrated TFT LCD interface, up to 1.5 MB of on-chip SRAM, and dual 10/100 Ethernet with L2 switch enable a single-chip design without an external graphics controller. Hardware secure boot and cryptography acceleration protect against unauthorized firmware flashing on factory-floor equipment.
Recommandé
Building Automation Controllers
The MVF60NS151CMK50 suits building automation gateways and controllers because it integrates dual Ethernet for IP-bridged BACnet or Modbus TCP networks, dual USB 2.0 OTG for field-service Wi-Fi or Zigbee dongles, and the heterogeneous core pair that runs a Linux stack on the A5 for cloud connectivity while the M4 services real-time HVAC or lighting loops. Hardware cryptography acceleration secures TLS handshakes for cloud telemetry, and the industrial -40C to +85C temperature range tolerates basement and rooftop enclosures. Up to 1.5 MB of SRAM supports rich protocol stacks without external DRAM on cost-optimized nodes.
Recommandé
Smart Energy Gateways and Data Concentrators
The MVF60NS151CMK50 is a strong fit for smart energy gateways and data concentrators that aggregate readings from multiple meters or sensors and forward them to a head-end system. The Cortex-A5 runs a Linux-based meter data management stack with TLS-secured MQTT or DLMS/COSEM, while the Cortex-M4 handles real-time pulse counting, tamper detection, and RTC-synchronized timestamping. Dual Ethernet with L2 switch enables daisy-chained meter networks, and hardware cryptography (AES, SHA, RNG) accelerates secure key exchange. The 1.23 V core / 3.3 V I/O supply scheme supports long-life battery-backed deployments with deep-sleep modes on the M4 core.
Recommandé
Factory Automation PLCs and Edge Controllers
The MVF60NS151CMK50 powers compact factory automation PLCs and edge controllers because the heterogeneous dual-core architecture separates IEC 61131-3 user logic on the Cortex-M4 at 167 MHz from OPC UA, MQTT, or PROFINET stack execution on the Cortex-A5 at 500 MHz. Secure boot and anti-tamper features protect intellectual property in programmable logic. Dual Ethernet with hardware L2 switch enables ring or line topologies without an external switch IC, reducing BOM cost. The 364-LFBGA package supports reflow-compatible SMT assembly on standard FR-4 PCBs used in PLC backplanes.
Recommandé
Point-of-Sale Terminals
The MVF60NS151CMK50 is well-suited for point-of-sale terminals because the Cortex-A5 at 500 MHz drives a color touchscreen GUI, payment application logic, and EMV contactless stacks, while the Cortex-M4 services real-time printer control, NFC reader polling, and secure keypad handling. Hardware cryptography acceleration speeds up PCI PTS-compliant PIN encryption, and secure boot prevents firmware substitution. Dual USB 2.0 OTG with integrated PHY supports external barcode scanners and receipt printers without additional hub ICs, and dual Ethernet enables both payment-terminal and back-office LAN connectivity from a single chip.
Recommandé
Medical Patient Monitoring Equipment
The MVF60NS151CMK50 fits medical patient monitoring equipment because the Cortex-M4 at 167 MHz handles deterministic acquisition of vital-sign waveforms (ECG, SpO2, NIBP) while the Cortex-A5 runs a Linux-based UI and HL7/FHIR connectivity stack. Hardware cryptography with secure boot helps meet FDA cybersecurity guidance for medical devices. The 364-LFBGA package enables compact motherboard layouts suitable for bedside monitors and portable telemetry units, and the industrial temperature range supports clinical-environment reliability. Up to 1.5 MB of on-chip SRAM buffers multi-channel waveform data without external memory in cost-sensitive designs.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MVF60NS151CMK50 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MVF60NS152CMK50 | MVF60NS151CMK40 | MVF60NS151CMK60 | MVF60NN151CMK50 | MVF50NS151CMK50 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 364-LFBGA (17x17) | 364-LFBGA (17x17) - same | 364-LFBGA (17x17) - same | 364-LFBGA (17x17) - same | 364-LFBGA (17x17) - same | 364-LFBGA (17x17) - same |
| USB 2.0 OTG | Dual with integrated PHY | Dual with integrated PHY | Dual with integrated PHY | Dual with integrated PHY | Dual with integrated PHY | Single with integrated PHY (VF5xx) |
| Ethernet | Dual 10/100 with L2 switch | Dual 10/100 with L2 switch | Dual 10/100 with L2 switch | Dual 10/100 with L2 switch | Dual 10/100 with L2 switch | Dual 10/100 (VF5xx, no L2 switch) |
| Hardware Cryptography | Yes (AES, SHA, RNG, secure boot) | Yes | Yes | Yes | Yes | Reduced security features |
| Vybrid Family Tier | VF6xx (high performance) | VF6xx | VF6xx | VF6xx | VF6xx | VF5xx (lower tier) |
Principaux différenciateurs
- Heterogeneous A5+M4 dual-core on a single die with hardware L2 Ethernet switch (vs MVF50NS151CMK50 (VF5xx family))
- Integrated dual USB 2.0 OTG with PHY eliminates external USB chips (vs MVF60NS152CMK50)
- Hardware cryptography and secure boot on-chip (vs i.MX 6ULL (Cortex-A7 single core))
Notes de conception
Estimated: The 364-ball LFBGA at 0.8 mm pitch requires via-in-pad or micro-via PCB technology for reliable fanout. Plan at least 4 PCB layers with a dedicated ground plane directly beneath the BGA to control impedance of the high-speed USB 2.0, Ethernet, and DDR interfaces. Use NXP's VF6xx design checklist routing rules for DDR, which include matched-clock trace lengths within 25 mils and 50 ohm single-ended impedance. Decoupling: place 100 nF X7R capacitors on every power ball pair plus bulk 4.7 uF and 22 uF tantalum or polymer capacitors near the PMIC output.
The MVF60NS151CMK50 requires a multi-rail supply: 1.23 V core (VDD), 3.3 V I/O (NVCC_*), and a separate 1.5 V DDR reference (if DDR is used). Power-up sequencing must enforce VDD before NVCC, or vice versa, per the VF6xx datasheet. NXP's PF3000 or PF4200 PMICs handle this sequencing and integrate the buck converters plus LDOs, reducing BOM and PCB area. Add a voltage supervisor such as TPS3823 to assert RESET during brown-out events, and verify the PMIC PGOOD timing matches the A5 reset release requirement.
Estimated: At 500 MHz on the Cortex-A5 with both cores active, the MVF60NS151CMK50 dissipates approximately 1-2 W depending on workload and peripheral activity. The 17x17 mm LFBGA package has a theta-JA of approximately 20-25 C/W on a 4-layer JEDEC test board, which yields a junction-to-ambient rise of 20-50 C at 1-2 W. For sealed enclosures without forced airflow, attach a small 10x10 mm copper pad heatsink with thermal epoxy or use a 4-6 layer PCB with thermal vias under the central ball grid to spread heat. Always validate with a thermocouple on a production board under worst-case workload.
Do not assume the JTAG pinout matches generic ARM Cortex-M debug headers; the Vybrid VF6xx uses a proprietary JTAG/SWD mapping documented in the VF6xx reference manual. Second, the boot configuration pins (BOOT_MOD, BMOD) must be pulled to the correct logic levels at reset to select the boot source (NOR flash, NAND, SD, serial). Third, the DDR controller has a strict PCB trace-length matching requirement and will fail memory tests if matched lengths are ignored. Finally, enable the asynchronous external abort handler in the A5 startup code before the M4 brings up its RTOS, otherwise shared-memory interrupts will fault.
Informations de conformité
RoHS and REACH compliance per NXP product page. Not AEC-Q100 qualified; for automotive-grade Vybrid parts consult NXP sales. Conflict-minerals compliance per NXP corporate policy.
