P2041NSN1NNB - QorIQ P2 1.3GHz Quad-Core PowerPC MPU | NXP
Référence : P2041NSN1NNB ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $268.5 | $2 685,00 |
| 100 | $245 | $24 500,00 |
| 500 | $220.75 | $110 375,00 |
| 1 000 | $198.4 | $198 400,00 |
P2041NSN1NNB Présentation
A microprocessor (MPU) is an integrated circuit that contains the central processing unit of a computing system, executing instructions fetched from memory and orchestrating I/O peripherals. Within the broader semiconductor hierarchy, an MPU sits above microcontrollers (MCUs) in compute capability and is positioned under SoCs in integration density. The QorIQ P2041 belongs to NXP's Power Architecture communications-processor lineage, which descends from the PowerPC e500 family and targets networking, telecom, and industrial control workloads.
The P2041 integrates four e500mc cores that share a 256 KB L2 cache fronted by per-core 32 KB I-cache and 32 KB D-cache, delivering high aggregate throughput for multi-threaded packet processing. A DDR3/3L memory controller with ECC supports up to 4 GB of addressable RAM, while on-chip networking includes five 1/10 Gbit/s enhanced SerDes lanes, three 1 Gbit/s Ethernet MACs, and PCI Express Gen 2 controllers for host or fabric interconnect. Hardware engines accelerate SEC 4.0 crypto, pattern matching, and table lookup operations commonly required in line-rate data planes.
Operating from a 0–105°C temperature range and rated at 1.3 GHz, the P2041NSN1NNB targets low-end and mid-range quad-core communications platforms. Software compatibility extends across the P1, P3, P4, and P5 QorIQ families, allowing reuse of existing firmware and toolchains. The 780-FCPBGA package exposes extensive I/O including Ethernet, PCIe, SATA, USB, DUART, I²C, SPI, and GPIO, enabling dense system designs without external bridge chips.
Typical applications include multi-service routers and switches, line-card controllers in chassis-based systems, industrial control and machine-to-machine gateways, and secure network appliances requiring integrated crypto offload. For designs that need higher single-thread performance, the P2040 variant is pin-compatible; for lower power budgets, the P2020 dual-core is also software-compatible within the same package.
When designing with this device, ensure the 780-BGA PCB layout meets NXP's reference design footprint and that thermal management handles the 12–18 W typical SoC dissipation. DDR3 trace impedance and length matching per the hardware design checklist are critical for stable memory operation at 1333 MT/s.
This page synthesizes distributor pricing, pin-compatible same-family variants, and practical design notes drawn from NXP reference documentation — providing engineering context not consolidated in the manufacturer datasheet alone.
Alternatives de remplacement direct pour P2041NSN1NNB — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec P2041NSN1NNB (même facteur de forme et même empreinte).
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
P2041NSN7NNB
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
P2041NSN5NNB
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
P2040NSN1NNB
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
P2041NSN1MNB
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
P2041NSN1NNB Valeurs maximales et caractéristiques électriques
| Aucune spécification disponible |
Guide de configuration des broches du P2041NSN1NNB standard
Configuration des broches du P2041NSN1NNB (boîtier standard). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour P2041NSN1NNB.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
P2041NSN1NNB convient pour 6 applications: Multi-Service Routers and Switches, Network Security Appliances, Industrial Control and Machine-to-Machine Gateways, Telecom Line-Card Processors, Print and Imaging Controllers, Wireless Base Station Control Plane.
Multi-Service Routers and Switches
The P2041NSN1NNB is well-suited for mid-range multi-service routers and aggregation switches that require multi-gigabit packet throughput with hardware crypto. Its four e500mc cores at 1.3 GHz combined with five 1/10G SerDes lanes deliver wire-speed forwarding for IPv4/IPv6, NAT, and firewall workloads. The integrated SEC 4.0 accelerator offloads IPsec and MACsec at line rate, eliminating the need for discrete crypto ASICs. Per NXP's QorIQ P2041 reference design, this part is commonly paired with NXP's SGMII/PHY transceivers and external DDR3 ECC memory for chassis-based router line cards.
Recommandé
Network Security Appliances
The P2041NSN1NNB's integrated SEC 4.0 engine makes it a strong fit for firewall, VPN concentrator, and UTM (unified threat management) appliances that demand line-rate IPsec/SSL inspection. Four cores at 1.3 GHz allocate two cores for control-plane and routing, while two cores handle data-plane deep-packet inspection via NXP's accelerated pattern-matching engine. The DDR3/3L controller with ECC supports up to 4 GB of memory for large flow/connection tables. The 0–105°C commercial-extended temperature grade lets the part operate in sealed fan-cooled appliance chassis typical of enterprise firewall deployments.
Recommandé
Industrial Control and Machine-to-Machine Gateways
The P2041NSN1NNB's quad-core performance and rich peripheral set (three 1GbE, USB, SATA, DUART, I²C, SPI, GPIO, PCIe) suit it for industrial M2M gateways and edge controllers in factory automation. Its automotive-grade temperature rating per the P2041 product brief (the 'NNB' suffix denotes automotive-grade test flow) supports deployment in industrial enclosures with extended thermal stress. The hardware pattern-matching engine accelerates deterministic networking protocols (EtherCAT, PROFINET) and the SEC engine secures OPC-UA and TLS/SSH sessions for IIoT. Software reuse from NXP's Linux BSP and Yocto support shortens time-to-market for industrial OEMs.
Recommandé
Telecom Line-Card Processors
In ATCA/AdvancedTCA and proprietary telecom chassis, the P2041NSN1NNB is widely used as a line-card processor for control-plane and signaling termination. Its four e500mc cores with hardware multithreading handle SS7, Diameter, and SIP signaling stacks, while the SERDES lanes interface to fabric switches. The DDR3 ECC controller supports 4 GB of memory for subscriber databases, and the PCIe Gen 2 controllers link to DSP co-processors or DSP farms for media transcoding. Software compatibility across the P1/P3/P4/P5 QorIQ families lets telecom OEMs reuse existing BSP investments across product lines.
Recommandé
Print and Imaging Controllers
The P2041NSN1NNB's PCIe interface, DDR3 memory bandwidth, and four-core compute make it suitable for high-end production-print controller boards managing raster image processing, color management, and PDL interpretation. Its hardware SEC 4.0 engine secures confidential print jobs via IPsec and hard-drive encryption, while the SERDES lanes connect to network PHYs. Per NXP's QorIQ P2041 product brief, the part supports the Linux and VxWorks RTOS commonly deployed in production-print firmware stacks.
Recommandé
Wireless Base Station Control Plane
The P2041NSN1NNB serves as a baseband-adjacent processor in small-cell and macro-cell base stations, handling LTE/5G NR L2/L3 protocol stacks and OAM signaling. Its four cores at 1.3 GHz provide sufficient compute for cell-site aggregation, while the SERDES lanes interface to RFICs and the PCIe links to DSP arrays. The hardware SEC engine secures backhaul IPsec tunnels, and the automotive-grade flow per the 'NNB' suffix supports deployment in outdoor enclosures with temperature swings. Per NXP's QorIQ communications processor portfolio, this part is widely adopted in small-cell reference designs.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour P2041NSN1NNB — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | P2041NSN7NNB | P2041NSN5NNB | P2040NSN1NNB | P2041NSN1MNB |
|---|---|---|---|---|---|
| Package | 780-FCPBGA (23x23 mm) | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | PowerPC e500mc (4-core) | PowerPC e500mc (4-core) | PowerPC e500mc (4-core) | PowerPC e500mc (4-core) | PowerPC e500mc (4-core) |
| Maximum Clock Frequency | 1.3 GHz | 1.2 GHz (-8%) | 1.5 GHz (+15%) | 1.0 GHz (-23%) | 1.3 GHz (same) |
| L2 Cache | 256 KB shared | 256 KB shared | 256 KB shared | 256 KB shared | 256 KB shared |
| DDR3 Memory Controller | DDR3/DDR3L with ECC, 1333 MT/s, 4 GB | Same | Same | Same | Same |
| 10 Gigabit Ethernet MACs | 2 (10G) + 3 (1G) | 2 (10G) + 3 (1G) - same | 2 (10G) + 3 (1G) - same | 1 (10G) + 3 (1G) - one fewer | 2 (10G) + 3 (1G) - same |
| Temperature Grade | 0°C to +105°C (commercial-extended) | 0°C to +105°C | 0°C to +105°C | 0°C to +105°C | -40°C to +105°C (industrial) |
| Encryption Accelerator | SEC 4.0 | SEC 4.0 - same | SEC 4.0 - same | SEC 4.0 - same | SEC 4.0 - same |
Principaux différenciateurs
- Dual 10 Gigabit Ethernet MACs (vs P2040NSN1NNB)
- 1.3 GHz middle speed grade (vs P2041NSN7NNB / P2041NSN5NNB)
- Pin-compatible within the P2041 family (vs P2020NSN1NNB)
Notes de conception
Estimated: At 1.3 GHz the P2041 dissipates approximately 12–18 W typical SoC power depending on core activation and SERDES utilization. Designers must follow NXP's thermal design guide and provide at least a 4-layer PCB with a continuous ground plane beneath the 780-FCPBGA; heatsink attachment via the integrated heat-spreader lid is recommended for fanless deployments. Junction temperature must remain below 105°C for the NNB grade.
The 780-FCPBGA uses 1.0 mm ball pitch on a 23x23 mm body. Per NXP's hardware design checklist, use a microvia stack-up with 0.5 mm via-in-pad for the inner rows and route DDR3 traces with matched impedance (50 ohms SE, 100 ohms diff) and length-matched within ±25 mils to the DDR3 controller fly-by topology. Decouple each power rail with 0.1 µF + 10 µF ceramic capacitors placed within 5 mm of the BGA balls.
Do not confuse the P2041 (quad-core, dual 10GbE) with the pin-compatible P2040 (quad-core, single 10GbE) without reviewing SERDES lane assignments — the P2041 has an additional 10G MAC routed to dedicated SERDES lanes. Also avoid mixing the P2020 (dual-core, different pinout in the same 780-BGA package) with P2041 hardware; the P2020 is NOT a drop-in replacement despite the shared package outline. Verify against the NXP hardware specifications document before PCB layout.
Per NXP's reference design, route SERDES differential pairs with 100-ohm differential impedance, length matching within ±0.13 mm (5 mils), and ground-flanked via stitching every λ/10. PCI Express Gen 2 signals require the same routing discipline. The DDR3 controller's fly-by topology mandates that VTT termination voltage be supplied and properly decoupled.
Informations de conformité
RoHS compliant per NXP product declaration. NNB suffix denotes NXP's automotive-grade test flow (not AEC-Q100 qualified). Contact NXP for REACH SVHC disclosure details.
