PCM1744U/2K - 24-Bit 96kHz Stereo DAC | Texas Instruments
Référence : PCM1744U/2K ✓ ActifPCM1744U/2K Présentation
An audio DAC is a signal-conversion integrated circuit that transforms digital audio samples into an analog voltage waveform suitable for amplification and loudspeaker output. The PCM1744 belongs to the SoundPlus family of stereo DACs and sits within the broader hierarchy of ADC/DAC converters, interface integrated circuits, and semiconductor signal-processing devices. Its role is to reconstruct left- and right-channel audio from an I2S-format digital stream generated by a digital audio processor.
The converter's 24-bit resolution provides a detailed digital representation of each audio sample, while the 96kHz sampling rate supports high-bandwidth stereo playback. Its 97dB SNR specification indicates a high-fidelity conversion target suitable for consumer audio equipment, digital amplifiers, multimedia systems, and other stereo audio products. Operation from a single 5V supply simplifies analog and digital power architecture compared with dual-rail designs.
The PCM1744U/2K uses an I2S interface to receive synchronized serial audio data, a bit clock, and a channel latch signal. This standardized interface makes it suitable for systems whose source device already produces I2S audio. Digital timing must remain consistent with the converter requirements because incorrect clock relationships can produce channel misalignment, clicks, distortion, or incorrect output frequency.
Typical uses include home-audio signal paths, active speakers, set-top and multimedia equipment, USB or network audio subsystems, and industrial monitoring products with stereo audio outputs. In each application, the PCM1744 converts the digital source stream into a pair of analog outputs that can feed a volume-control stage or a power amplifier. Its 14-pin SOIC package supports conventional surface-mount assembly.
When laying out the PCB, place decoupling capacitors close to the supply pins and route analog and digital return currents carefully. Confirm the required output filtering and load conditions in the manufacturer datasheet before finalizing the analog stage. The DAC can provide a clean conversion point, but its measured performance still depends on clock quality, grounding, supply stability, and the following amplifier design.
This product page combines the PCM1744U/2K electrical characteristics, package information, ordering guidance, application analysis, and pin-compatible family comparisons. It also highlights practical clocking, decoupling, analog-output, and design-selection considerations that help engineers integrate the converter efficiently into high-fidelity stereo audio equipment.
Alternatives de remplacement direct pour PCM1744U/2K — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PCM1744U/2K (même facteur de forme et même empreinte) — différant par Package.
PCM1744U
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →PCM1744U/2KG4
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PCM1742U/2K
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
PCM1743U/2K
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
PCM1745U/2K
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
PCM1744U/2K Valeurs maximales et caractéristiques électriques
| Converter Type | Stereo audio digital-to-analog converter |
| Résolution | 24 bit |
| Maximum Sampling Rate | 96 kHz |
| Signal-to-Noise Ratio | 97 dB |
| Digital Audio Interface | I2S |
| Number of Audio Channels | 2 channels |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Nominal Supply Voltage | 5 V |
| Plage de température de fonctionnement | -25°C to +85°C |
| Boîtier | 14-pin SOIC |
| Package Pin Count | 14 pins |
| Type de montage | Surface mount |
| Shipping Format | Tape and reel |
| Standard Shipping Quantity | 2500 pieces |
Guide de configuration des broches du PCM1744U/2K 14 pins
Configuration des broches du PCM1744U/2K (boîtier 14 pins). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour PCM1744U/2K.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PCM1744U/2K convient pour 6 applications: Home Audio Stereo DAC, Active Speaker Signal Path, Multimedia Audio Conversion, Digital Amplifier Front End, Network and Streaming Audio Module, Industrial Audio Monitoring.
Home Audio Stereo DAC
The PCM1744U/2K fits a high-fidelity home-audio conversion stage because it provides 24-bit resolution, 96kHz sampling, and a 97dB SNR in a 14-pin SOIC package. Place it after an I2S-capable digital audio processor so the processor can generate synchronized left- and right-channel data directly. The converter then produces analog stereo signals for a volume-control and power-amplifier stage. Its single 4.5V-to-5.5V supply simplifies system power planning, while careful grounding and manufacturer-recommended output filtering are needed to preserve the specified signal-to-noise performance.
Recommandé
Active Speaker Signal Path
The PCM1744U/2K is appropriate for the digital-to-analog stage of an active speaker when the source supplies I2S audio. Its 96kHz maximum sampling rate and 24-bit conversion preserve the digital source characteristics before an analog power amplifier drives the transducers. The 97dB SNR specification is useful when the system needs a quiet conversion point between digital playback and analog amplification. Designers should maintain short analog output routes, use a stable 5V supply, and configure the output network according to the manufacturer recommendations for the intended load.
Recommandé
Multimedia Audio Conversion
A multimedia player can use the PCM1744U/2K to translate an I2S stream into analog stereo audio for headphones, line-level inputs, or an external amplifier. The converter's 24-bit word length supports high-resolution source material, and its 96kHz sampling capability is suitable for conventional high-rate digital audio streams. Because the device accepts standard I2S timing, it can sit directly beside a digital audio controller on a mixed-signal PCB. Local supply decoupling, controlled return-current paths, and correctly scaled analog outputs remain essential for preventing digital switching noise from appearing at the audio output.
Recommandé
Digital Amplifier Front End
The PCM1744U/2K can provide the analog input stage for a digital power amplifier or a digitally controlled analog amplifier. The I2S interface accepts serialized stereo audio from a sound processor, while the DAC creates separate left- and right-channel voltages for subsequent gain and power stages. The converter's single 5V supply operation reduces the number of analog rails required around the signal path. For best results, the output impedance and capacitance presented to the DAC must remain compatible with the recommended circuit, and the analog section should be isolated from high-current amplifier return paths.
Recommandé
Network and Streaming Audio Module
In a network-audio or streaming module, the PCM1744U/2K can convert decoded I2S audio into an analog stereo output for line-level processing. The 24-bit resolution and 96kHz sampling rate align with common digital-audio formats, while the 97dB SNR supports quiet analog conversion. A practical implementation places the DAC close to the audio processor's I2S output and separates sensitive analog returns from Ethernet, power-converter, and memory currents. The 14-pin SOIC package remains easy to inspect and rework, but analog filtering and output loading should follow the manufacturer reference configuration.
Recommandé
Industrial Audio Monitoring
The PCM1744U/2K can serve as the stereo playback converter in an industrial monitoring or announcement system driven by an embedded audio processor. Its -25°C-to-85°C operating range supports a broad range of commercial equipment environments, and the single 5V supply operation simplifies integration into embedded boards. The I2S interface reduces parallel data routing, while 24-bit conversion and 96kHz sampling provide a capable playback format for speech, music, and confirmation tones. Production designs should test the analog output under worst-case supply conditions and isolate converter ground currents from motors, relays, and switching power stages.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PCM1744U/2K — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PCM1744U | PCM1744U/2KG4 | PCM1742U/2K | PCM1743U/2K | PCM1745U/2K |
|---|---|---|---|---|---|---|
| Package | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Digital Audio Interface | I2S | I2S | I2S | I2S | I2S | I2S |
Principaux différenciateurs
- Direct same-family drop-in candidate (vs PCM1744U)
- High-volume reel configuration (vs PCM1744U)
- Single-supply stereo conversion (vs PCM1743U/2K)
Notes de conception
Keep the PCM1744U/2K close to the I2S source and place its local decoupling capacitors adjacent to the relevant supply pins. Route serial clock and data traces away from the analog outputs, and keep digital ground return current on the logic side of the converter. The separation becomes especially important when a switching regulator or high-current amplifier shares the board, because coupled return paths can add noise directly to the reconstructed audio signal.
Verify that data, bit clock, and frame-latch timing satisfy the manufacturer interface requirements before routing the I2S signals. Incorrect clock phase or frequency mismatch can cause channel swapping, intermittent clicks, or distorted output even when the DAC itself operates correctly. Use source-synchronous routing, provide a continuous clock where required by the interface, and inspect timing at the converter pins rather than only at the digital controller.
Do not treat PCM1744U, PCM1744U/2K, and PCM1744U/2KG4 as interchangeable without checking the order code and mechanical packaging requirement. The target /2K configuration is associated with a 2500-piece tape-and-reel format. Confirm the 14-pin SOIC footprint, supply range, I2S interface, analog output arrangement, and production quantity before approving a substitution.
Design the single 5V converter rail to remain within 4.5V to 5.5V under startup, temperature, and load conditions. Provide low-impedance local decoupling at the DAC and route supply returns consistently with the manufacturer layout recommendation. If the 5V rail also powers amplifiers, motors, or switching converters, consider a dedicated filtered branch or a separate regulator for the audio converter to reduce transient coupling.
Informations de conformité
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact PCM1744U/2K ordering code. Automotive qualification was also not specified.