Texas Instruments

PCM1744U/2K - 24-Bit 96kHz Stereo DAC | Texas Instruments

MPN: PCM1744U/2K ✓ Hoạt động
4.5 V to 5.5 V Vdss 14-pin SOIC Package
MOQ: 1 |

PCM1744U/2K Tóm tắt

The Texas Instruments PCM1744U/2K is a 24-bit, 96kHz sampling stereo audio digital-to-analog converter with a 97dB signal-to-noise ratio, an I2S digital audio interface, and a 14-pin SOIC package. It operates from a single 4.5V to 5.5V supply and supports an operating temperature range of -25°C to 85°C. The PCM1744U/2K is supplied in a 2500-piece tape-and-reel configuration for high-volume production.

An audio DAC is a signal-conversion integrated circuit that transforms digital audio samples into an analog voltage waveform suitable for amplification and loudspeaker output. The PCM1744 belongs to the SoundPlus family of stereo DACs and sits within the broader hierarchy of ADC/DAC converters, interface integrated circuits, and semiconductor signal-processing devices. Its role is to reconstruct left- and right-channel audio from an I2S-format digital stream generated by a digital audio processor.

The converter's 24-bit resolution provides a detailed digital representation of each audio sample, while the 96kHz sampling rate supports high-bandwidth stereo playback. Its 97dB SNR specification indicates a high-fidelity conversion target suitable for consumer audio equipment, digital amplifiers, multimedia systems, and other stereo audio products. Operation from a single 5V supply simplifies analog and digital power architecture compared with dual-rail designs.

The PCM1744U/2K uses an I2S interface to receive synchronized serial audio data, a bit clock, and a channel latch signal. This standardized interface makes it suitable for systems whose source device already produces I2S audio. Digital timing must remain consistent with the converter requirements because incorrect clock relationships can produce channel misalignment, clicks, distortion, or incorrect output frequency.

Typical uses include home-audio signal paths, active speakers, set-top and multimedia equipment, USB or network audio subsystems, and industrial monitoring products with stereo audio outputs. In each application, the PCM1744 converts the digital source stream into a pair of analog outputs that can feed a volume-control stage or a power amplifier. Its 14-pin SOIC package supports conventional surface-mount assembly.

When laying out the PCB, place decoupling capacitors close to the supply pins and route analog and digital return currents carefully. Confirm the required output filtering and load conditions in the manufacturer datasheet before finalizing the analog stage. The DAC can provide a clean conversion point, but its measured performance still depends on clock quality, grounding, supply stability, and the following amplifier design.

This product page combines the PCM1744U/2K electrical characteristics, package information, ordering guidance, application analysis, and pin-compatible family comparisons. It also highlights practical clocking, decoupling, analog-output, and design-selection considerations that help engineers integrate the converter efficiently into high-fidelity stereo audio equipment.

Bộ thay thế dễ dàng lắp đặt cho PCM1744U/2K — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PCM1744U/2K (cùng hình factor và footprint) — khác nhau ở Package.

Texas Instruments
Package: 14-pin SOIC (D)

PCM1744U

✅ Drop-In
Texas Instruments
📦 14-pin SOIC
Stereo audio digital-to-analog converter (DAC) · Texas Instruments · 24 bit · 96 kHz · 2 channels · 97 dB · I2S · SoundPlus

Liên hệ để biết giá

Xem tài liệu →

PCM1744U/2KG4

✅ Drop-In
📦 14-pin SOIC
Same 24-bit, 96kHz PCM1744 converter and 14-pin SOIC footprint; ordering-suffix handling differs by 0 percentage points in core conversion ratings.

📋 Tham chiếu thay thế (không có trong danh mục)

PCM1742U/2K

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 14-pin SOIC
Same-brand SoundPlus 14-pin SOIC stereo DAC family; conversion architecture is closely related, with 0% difference stated for the 24-bit and 96kHz core ratings.

📋 Tham chiếu thay thế (không có trong danh mục)

PCM1743U/2K

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 14-pin SOIC
Same-brand 24-bit SoundPlus stereo DAC in the 14-pin SOIC footprint; PCM1743 family filtering and clock features differ, while the core interface remains I2S.

📋 Tham chiếu thay thế (không có trong danh mục)

PCM1745U/2K

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 14-pin SOIC
Same-brand SoundPlus stereo DAC family in a 14-pin SOIC package; PCM1745 family conversion-path and filter choices differ while retaining 24-bit I2S operation.

📋 Tham chiếu thay thế (không có trong danh mục)

PCM1744U/2K Tỷ lệ tối đa & tính chất điện

Converter Type Stereo audio digital-to-analog converter
Độ phân giải 24 bit
Maximum Sampling Rate 96 kHz
Signal-to-Noise Ratio 97 dB
Digital Audio Interface I2S
Number of Audio Channels 2 channels
Supply Voltage Range 4.5 V to 5.5 V
Nominal Supply Voltage 5 V
Khoảng nhiệt độ hoạt động -25°C to +85°C
Hộp 14-pin SOIC
Package Pin Count 14 pins
Kiểu lắp đặt Surface mount
Shipping Format Tape and reel
Standard Shipping Quantity 2500 pieces

Hướng dẫn cấu hình chân PCM1744U/2K 14 pins

Cấu hình chân cho PCM1744U/2K (14 pins gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 14 pins cho PCM1744U/2K

Không có dữ liệu chân cụ thể sẵn có cho PCM1744U/2K.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

PCM1744U/2K phù hợp cho 6 Áp dụngs: Home Audio Stereo DAC, Active Speaker Signal Path, Multimedia Audio Conversion, Digital Amplifier Front End, Network and Streaming Audio Module, Industrial Audio Monitoring.

🎧

Home Audio Stereo DAC

The PCM1744U/2K fits a high-fidelity home-audio conversion stage because it provides 24-bit resolution, 96kHz sampling, and a 97dB SNR in a 14-pin SOIC package. Place it after an I2S-capable digital audio processor so the processor can generate synchronized left- and right-channel data directly. The converter then produces analog stereo signals for a volume-control and power-amplifier stage. Its single 4.5V-to-5.5V supply simplifies system power planning, while careful grounding and manufacturer-recommended output filtering are needed to preserve the specified signal-to-noise performance.

🔊

Active Speaker Signal Path

The PCM1744U/2K is appropriate for the digital-to-analog stage of an active speaker when the source supplies I2S audio. Its 96kHz maximum sampling rate and 24-bit conversion preserve the digital source characteristics before an analog power amplifier drives the transducers. The 97dB SNR specification is useful when the system needs a quiet conversion point between digital playback and analog amplification. Designers should maintain short analog output routes, use a stable 5V supply, and configure the output network according to the manufacturer recommendations for the intended load.

📱

Multimedia Audio Conversion

A multimedia player can use the PCM1744U/2K to translate an I2S stream into analog stereo audio for headphones, line-level inputs, or an external amplifier. The converter's 24-bit word length supports high-resolution source material, and its 96kHz sampling capability is suitable for conventional high-rate digital audio streams. Because the device accepts standard I2S timing, it can sit directly beside a digital audio controller on a mixed-signal PCB. Local supply decoupling, controlled return-current paths, and correctly scaled analog outputs remain essential for preventing digital switching noise from appearing at the audio output.

⚡

Digital Amplifier Front End

The PCM1744U/2K can provide the analog input stage for a digital power amplifier or a digitally controlled analog amplifier. The I2S interface accepts serialized stereo audio from a sound processor, while the DAC creates separate left- and right-channel voltages for subsequent gain and power stages. The converter's single 5V supply operation reduces the number of analog rails required around the signal path. For best results, the output impedance and capacitance presented to the DAC must remain compatible with the recommended circuit, and the analog section should be isolated from high-current amplifier return paths.

🌐

Network and Streaming Audio Module

In a network-audio or streaming module, the PCM1744U/2K can convert decoded I2S audio into an analog stereo output for line-level processing. The 24-bit resolution and 96kHz sampling rate align with common digital-audio formats, while the 97dB SNR supports quiet analog conversion. A practical implementation places the DAC close to the audio processor's I2S output and separates sensitive analog returns from Ethernet, power-converter, and memory currents. The 14-pin SOIC package remains easy to inspect and rework, but analog filtering and output loading should follow the manufacturer reference configuration.

🏭

Industrial Audio Monitoring

The PCM1744U/2K can serve as the stereo playback converter in an industrial monitoring or announcement system driven by an embedded audio processor. Its -25°C-to-85°C operating range supports a broad range of commercial equipment environments, and the single 5V supply operation simplifies integration into embedded boards. The I2S interface reduces parallel data routing, while 24-bit conversion and 96kHz sampling provide a capable playback format for speech, music, and confirmation tones. Production designs should test the analog output under worst-case supply conditions and isolate converter ground currents from motors, relays, and switching power stages.

Tóm tắt các sản phẩm được đề xuất

PCM1744U Texas Instruments Được sử dụng trong: Home Audio Stereo DAC, Active Speaker Signal Path, Multimedia Audio Conversion, Digital Amplifier Front End, Network and Streaming Audio Module, Industrial Audio Monitoring PCM1744U/2KG4 Same-family ordering alternative Được sử dụng trong: Home Audio Stereo DAC, Active Speaker Signal Path, Multimedia Audio Conversion, Digital Amplifier Front End, Network and Streaming Audio Module, Industrial Audio Monitoring
What are the key specifications of PCM1744U/2K that engineers should know?
The PCM1744U/2K is a 24-bit, 96kHz stereo audio DAC with a 97dB SNR, I2S interface, single 5V supply, and 14-pin SOIC package. According to the Texas Instruments product page, the converter operates from 4.5V to 5.5V over -25°C to 85°C. Its key integration constraints are correct I2S clocking, suitable digital and analog grounding, output filtering, and decoupling near the supply pins.
Where can I download the PCM1744U/2K datasheet PDF?
The PCM1744U/2K datasheet PDF can be accessed through the Texas Instruments SoundPlus product link at https://www.ti.com/lit/gpn/pcm1744. The document describes the 24-bit, 96kHz stereo converter, electrical limits, interface timing, pin functions, and application information. For the exact tape-and-reel ordering code PCM1744U/2K, use the ordering-information table when confirming the package and shipping configuration.
Where can I find the PCM1744U/2K pinout?
The PCM1744U/2K pinout appears in the pin-configuration section of the Texas Instruments PCM1744 manufacturer datasheet. The device uses a 14-pin SOIC package, with separate left- and right-channel analog outputs and pins associated with the I2S data, clock, control, ground, and supply functions. Use the pin-description table and recommended layout diagram when assigning PCB nets rather than relying on package position alone.
What is the supply voltage range of PCM1744U/2K?
The PCM1744U/2K operates from 4.5V to 5.5V, with 5V as the nominal single-supply condition. The Texas Instruments product listing identifies a 24-bit, 96kHz stereo DAC using an I2S interface. Design the power rails to remain within this range across temperature, and account for startup and load-transient requirements when selecting the regulator and local decoupling network.
Is PCM1744U/2K suitable for high-fidelity stereo audio?
Yes, the PCM1744U/2K is suitable for high-fidelity stereo audio because it provides 24-bit resolution, a 96kHz sampling rate, and a 97dB SNR. According to the Texas Instruments product page, these specifications position the device for premium stereo audio reproduction. Actual system performance also depends on the digital source, clock quality, analog filter design, grounding, and downstream amplification.
What is PCM1744U/2K and what does it do?
The PCM1744U/2K is a 24-bit, 96kHz sampling stereo digital-to-analog converter from Texas Instruments. It accepts an I2S digital audio stream and generates left- and right-channel analog outputs for subsequent voltage amplification or loudspeaker drive. The converter operates from a single 4.5V to 5.5V supply and is packaged in a 14-pin SOIC.
How does PCM1744U/2K compare with PCM1744U?
PCM1744U/2K and PCM1744U identify the same Texas Instruments SoundPlus stereo DAC family, while the ordering suffix distinguishes the supplied configuration. The manufacturer lists PCM1744U as a 97dB SNR, 24-bit, 96kHz converter in a 14-pin SOIC package. The /2K ordering option is associated with a 2500-piece tape-and-reel format, so confirm the suffix and mechanical configuration before substituting.
What is the best drop-in replacement for PCM1744U/2K?
PCM1744U is the closest same-family drop-in candidate because it uses the same 14-pin SOIC footprint and represents the same 24-bit, 96kHz stereo DAC family. The /2K suffix is an ordering code, so the mechanical packaging requirement must also match. Review the manufacturer ordering table, pin functions, supply range, and application circuitry before approving any replacement for production.
Can PCM1744U/2K replace PCM1744U/2KG4?
PCM1744U/2K can be considered as a candidate replacement for PCM1744U/2KG4 because both identify the PCM1744 stereo DAC in a 14-pin SOIC package. Their order codes may differ in production or environmental-processing details, so approval should confirm electrical equivalence, pin compatibility, lifecycle status, and the required tape-and-reel format. The manufacturer ordering information is the controlling reference for the exact suffix.
When should I choose PCM1744U/2K over another SoundPlus DAC?
Choose PCM1744U/2K when the design requires a 24-bit, 96kHz stereo I2S converter, a 97dB SNR target, and a 14-pin SOIC implementation. Select another family member when a different supported sampling rate, filter characteristic, channel configuration, package, or automotive qualification is necessary. Confirm all clock, supply, output, and footprint requirements rather than relying on the shared SoundPlus family name.
Is PCM1744U/2K the same as PCM1744U?
PCM1744U/2K and PCM1744U are closely related orderable versions of the Texas Instruments PCM1744 stereo DAC. Both are associated with the 14-pin SOIC device, while /2K specifies the tape-and-reel ordering configuration. They should not be treated as automatically interchangeable without checking the ordering table, current lifecycle status, and whether the required 2500-piece reel format must be retained.
What can replace PCM1744U/2K on the same PCB?
PCM1744U is the principal same-footprint replacement candidate for PCM1744U/2K because both correspond to the PCM1744 14-pin SOIC stereo DAC. A valid substitution must preserve the I2S interface, 4.5V to 5.5V supply range, 24-bit/96kHz conversion requirements, analog output configuration, and mechanical outline. Review the pin-description and ordering tables before finalizing the cross-reference.
Where can I buy PCM1744U/2K and check current availability?
Use the Request a Quote form on this page to request current PCM1744U/2K availability, unit pricing, and lead time. The request should identify the complete Texas Instruments MPN PCM1744U/2K and confirm the 2500-piece tape-and-reel configuration. Because production schedules and inventory can change, obtain a written quotation before scheduling a high-volume build.
What is the price of PCM1744U/2K?
Current PCM1744U/2K pricing depends on order quantity, inventory, and required delivery terms. Use the Request a Quote form on this page to request a current unit quotation for the exact Texas Instruments order code and 2500-piece tape-and-reel format. Quote requests avoid reliance on an outdated historical price and allow production planners to evaluate quantities and lead time together.
What is the lead time for PCM1744U/2K?
Current lead time for PCM1744U/2K should be confirmed through the Request a Quote form on this page. Include the requested quantity, target delivery date, and required 2500-piece tape-and-reel packaging in the request. A direct quote can also establish whether the order can be fulfilled from available inventory or requires a manufacturer production allocation.
What design considerations matter for a PCM1744U/2K audio path?
Clock integrity, grounding, decoupling, and analog-output implementation are the principal design considerations for PCM1744U/2K. The I2S interface requires correctly related data, bit-clock, and latch signals to prevent channel misalignment. Place local supply capacitors close to the device, keep digital return paths away from sensitive analog outputs, and implement the manufacturer-recommended output network and loading.

Dữ liệu tham khảo kỹ thuật cho PCM1744U/2K — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose PCM1744U/2K for a stereo conversion stage that requires an I2S interface, 24-bit resolution, 96kHz sampling, and a 97dB SNR in a 14-pin SOIC footprint. PCM1744U is the closest functional alternative when the exact /2K reel format is not required. PCM1744U/2KG4 is relevant when the green-production ordering designation is needed, subject to approval of the exact suffix and lifecycle status. PCM1742U/2K, PCM1743U/2K, or PCM1745U/2K should be considered only when their individual filter, clock, and performance characteristics fit the design. In every case, verify the 14-pin SOIC footprint, 4.5V-to-5.5V supply, I2S timing, output loading, and manufacturer reference circuit before release.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này PCM1744U PCM1744U/2KG4 PCM1742U/2K PCM1743U/2K PCM1745U/2K
Package 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Digital Audio Interface I2S I2S I2S I2S I2S I2S

Bảo phân biệt quan trọng

  • Direct same-family drop-in candidate (vsPCM1744U)
  • High-volume reel configuration (vsPCM1744U)
  • Single-supply stereo conversion (vsPCM1743U/2K)

Ghi chú thiết kế

Keep the PCM1744U/2K close to the I2S source and place its local decoupling capacitors adjacent to the relevant supply pins. Route serial clock and data traces away from the analog outputs, and keep digital ground return current on the logic side of the converter. The separation becomes especially important when a switching regulator or high-current amplifier shares the board, because coupled return paths can add noise directly to the reconstructed audio signal.

Verify that data, bit clock, and frame-latch timing satisfy the manufacturer interface requirements before routing the I2S signals. Incorrect clock phase or frequency mismatch can cause channel swapping, intermittent clicks, or distorted output even when the DAC itself operates correctly. Use source-synchronous routing, provide a continuous clock where required by the interface, and inspect timing at the converter pins rather than only at the digital controller.

Do not treat PCM1744U, PCM1744U/2K, and PCM1744U/2KG4 as interchangeable without checking the order code and mechanical packaging requirement. The target /2K configuration is associated with a 2500-piece tape-and-reel format. Confirm the 14-pin SOIC footprint, supply range, I2S interface, analog output arrangement, and production quantity before approving a substitution.

Design the single 5V converter rail to remain within 4.5V to 5.5V under startup, temperature, and load conditions. Provide low-impedance local decoupling at the DAC and route supply returns consistently with the manufacturer layout recommendation. If the 5V rail also powers amplifiers, motors, or switching converters, consider a dedicated filtered branch or a separate regulator for the audio converter to reduce transient coupling.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact PCM1744U/2K ordering code. Automotive qualification was also not specified.

Dữ liệu được xác minh vào: 2026-11-15 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

PCM1744U/2K datasheet PCM1744U/2K pinout PCM1744U/2K equivalent PCM1744U/2K replacement PCM1744U/2K cross reference PCM1744U/2K price PCM1744U/2K stock Texas Instruments PCM1744U/2K PCM1744U/2K 24 bit 96kHz DAC PCM1744U/2K 14 pin SOIC PCM1744U/2K audio application PCM1744U vs PCM1744U/2K

Các bộ phận và thuật ngữ liên quan

Texas Instruments PCM1744U/2K PCM1744U PCM1744U/2KG4 PCM1742U/2K PCM1743U/2K PCM1745U/2K SoundPlus stereo audio DAC digital-to-analog converter ADC/DAC converter audio interface IC I2S 24-bit resolution 96kHz sampling rate 97dB SNR 14-pin SOIC SOIC package family surface-mount package single 5V supply active speaker home audio digital audio analog output filtering Texas Instruments product page
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ