PCM1744U/2K - 24-Bit 96kHz Stereo DAC | Texas Instruments
MPN: PCM1744U/2K ✓ 啟用中PCM1744U/2K 概覽
An audio DAC is a signal-conversion integrated circuit that transforms digital audio samples into an analog voltage waveform suitable for amplification and loudspeaker output. The PCM1744 belongs to the SoundPlus family of stereo DACs and sits within the broader hierarchy of ADC/DAC converters, interface integrated circuits, and semiconductor signal-processing devices. Its role is to reconstruct left- and right-channel audio from an I2S-format digital stream generated by a digital audio processor.
The converter's 24-bit resolution provides a detailed digital representation of each audio sample, while the 96kHz sampling rate supports high-bandwidth stereo playback. Its 97dB SNR specification indicates a high-fidelity conversion target suitable for consumer audio equipment, digital amplifiers, multimedia systems, and other stereo audio products. Operation from a single 5V supply simplifies analog and digital power architecture compared with dual-rail designs.
The PCM1744U/2K uses an I2S interface to receive synchronized serial audio data, a bit clock, and a channel latch signal. This standardized interface makes it suitable for systems whose source device already produces I2S audio. Digital timing must remain consistent with the converter requirements because incorrect clock relationships can produce channel misalignment, clicks, distortion, or incorrect output frequency.
Typical uses include home-audio signal paths, active speakers, set-top and multimedia equipment, USB or network audio subsystems, and industrial monitoring products with stereo audio outputs. In each application, the PCM1744 converts the digital source stream into a pair of analog outputs that can feed a volume-control stage or a power amplifier. Its 14-pin SOIC package supports conventional surface-mount assembly.
When laying out the PCB, place decoupling capacitors close to the supply pins and route analog and digital return currents carefully. Confirm the required output filtering and load conditions in the manufacturer datasheet before finalizing the analog stage. The DAC can provide a clean conversion point, but its measured performance still depends on clock quality, grounding, supply stability, and the following amplifier design.
This product page combines the PCM1744U/2K electrical characteristics, package information, ordering guidance, application analysis, and pin-compatible family comparisons. It also highlights practical clocking, decoupling, analog-output, and design-selection considerations that help engineers integrate the converter efficiently into high-fidelity stereo audio equipment.
直接替換替代品,適用於 PCM1744U/2K — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PCM1744U/2K (相同外形與佔位) — 差異在於 Package.
PCM1744U
✅ 直接替換聯絡詢價
查看資料表 →PCM1744U/2KG4
✅ 直接替換📋 參考替代品(不在目錄中)
PCM1742U/2K
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
PCM1743U/2K
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
PCM1745U/2K
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
PCM1744U/2K 最大額定值與電氣特性
| Converter Type | Stereo audio digital-to-analog converter |
| 解析度 | 24 bit |
| Maximum Sampling Rate | 96 kHz |
| Signal-to-Noise Ratio | 97 dB |
| Digital Audio Interface | I2S |
| Number of Audio Channels | 2 channels |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Nominal Supply Voltage | 5 V |
| 工作溫度範圍 | -25°C to +85°C |
| 封裝 | 14-pin SOIC |
| Package Pin Count | 14 pins |
| 安裝類型 | Surface mount |
| Shipping Format | Tape and reel |
| Standard Shipping Quantity | 2500 pieces |
PCM1744U/2K 14 pins 腳位配置指南
PCM1744U/2K(14 pins 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: PCM1744U/2K.
請參閱 資料表 以查看完整腳位配置。
典型應用
PCM1744U/2K 適用於 6 應用s: Home Audio Stereo DAC, Active Speaker Signal Path, Multimedia Audio Conversion, Digital Amplifier Front End, Network and Streaming Audio Module, Industrial Audio Monitoring.
Home Audio Stereo DAC
The PCM1744U/2K fits a high-fidelity home-audio conversion stage because it provides 24-bit resolution, 96kHz sampling, and a 97dB SNR in a 14-pin SOIC package. Place it after an I2S-capable digital audio processor so the processor can generate synchronized left- and right-channel data directly. The converter then produces analog stereo signals for a volume-control and power-amplifier stage. Its single 4.5V-to-5.5V supply simplifies system power planning, while careful grounding and manufacturer-recommended output filtering are needed to preserve the specified signal-to-noise performance.
推薦
Active Speaker Signal Path
The PCM1744U/2K is appropriate for the digital-to-analog stage of an active speaker when the source supplies I2S audio. Its 96kHz maximum sampling rate and 24-bit conversion preserve the digital source characteristics before an analog power amplifier drives the transducers. The 97dB SNR specification is useful when the system needs a quiet conversion point between digital playback and analog amplification. Designers should maintain short analog output routes, use a stable 5V supply, and configure the output network according to the manufacturer recommendations for the intended load.
推薦
Multimedia Audio Conversion
A multimedia player can use the PCM1744U/2K to translate an I2S stream into analog stereo audio for headphones, line-level inputs, or an external amplifier. The converter's 24-bit word length supports high-resolution source material, and its 96kHz sampling capability is suitable for conventional high-rate digital audio streams. Because the device accepts standard I2S timing, it can sit directly beside a digital audio controller on a mixed-signal PCB. Local supply decoupling, controlled return-current paths, and correctly scaled analog outputs remain essential for preventing digital switching noise from appearing at the audio output.
推薦
Digital Amplifier Front End
The PCM1744U/2K can provide the analog input stage for a digital power amplifier or a digitally controlled analog amplifier. The I2S interface accepts serialized stereo audio from a sound processor, while the DAC creates separate left- and right-channel voltages for subsequent gain and power stages. The converter's single 5V supply operation reduces the number of analog rails required around the signal path. For best results, the output impedance and capacitance presented to the DAC must remain compatible with the recommended circuit, and the analog section should be isolated from high-current amplifier return paths.
推薦
Network and Streaming Audio Module
In a network-audio or streaming module, the PCM1744U/2K can convert decoded I2S audio into an analog stereo output for line-level processing. The 24-bit resolution and 96kHz sampling rate align with common digital-audio formats, while the 97dB SNR supports quiet analog conversion. A practical implementation places the DAC close to the audio processor's I2S output and separates sensitive analog returns from Ethernet, power-converter, and memory currents. The 14-pin SOIC package remains easy to inspect and rework, but analog filtering and output loading should follow the manufacturer reference configuration.
推薦
Industrial Audio Monitoring
The PCM1744U/2K can serve as the stereo playback converter in an industrial monitoring or announcement system driven by an embedded audio processor. Its -25°C-to-85°C operating range supports a broad range of commercial equipment environments, and the single 5V supply operation simplifies integration into embedded boards. The I2S interface reduces parallel data routing, while 24-bit conversion and 96kHz sampling provide a capable playback format for speech, music, and confirmation tones. Production designs should test the analog output under worst-case supply conditions and isolate converter ground currents from motors, relays, and switching power stages.
推薦
推薦產品摘要
工程參考資料,適用於 PCM1744U/2K — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PCM1744U | PCM1744U/2KG4 | PCM1742U/2K | PCM1743U/2K | PCM1745U/2K |
|---|---|---|---|---|---|---|
| Package | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Digital Audio Interface | I2S | I2S | I2S | I2S | I2S | I2S |
主要差異化特點
- Direct same-family drop-in candidate (對比PCM1744U)
- High-volume reel configuration (對比PCM1744U)
- Single-supply stereo conversion (對比PCM1743U/2K)
設計說明
Keep the PCM1744U/2K close to the I2S source and place its local decoupling capacitors adjacent to the relevant supply pins. Route serial clock and data traces away from the analog outputs, and keep digital ground return current on the logic side of the converter. The separation becomes especially important when a switching regulator or high-current amplifier shares the board, because coupled return paths can add noise directly to the reconstructed audio signal.
Verify that data, bit clock, and frame-latch timing satisfy the manufacturer interface requirements before routing the I2S signals. Incorrect clock phase or frequency mismatch can cause channel swapping, intermittent clicks, or distorted output even when the DAC itself operates correctly. Use source-synchronous routing, provide a continuous clock where required by the interface, and inspect timing at the converter pins rather than only at the digital controller.
Do not treat PCM1744U, PCM1744U/2K, and PCM1744U/2KG4 as interchangeable without checking the order code and mechanical packaging requirement. The target /2K configuration is associated with a 2500-piece tape-and-reel format. Confirm the 14-pin SOIC footprint, supply range, I2S interface, analog output arrangement, and production quantity before approving a substitution.
Design the single 5V converter rail to remain within 4.5V to 5.5V under startup, temperature, and load conditions. Provide low-impedance local decoupling at the DAC and route supply returns consistently with the manufacturer layout recommendation. If the 5V rail also powers amplifiers, motors, or switching converters, consider a dedicated filtered branch or a separate regulator for the audio converter to reduce transient coupling.
合規資訊
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact PCM1744U/2K ordering code. Automotive qualification was also not specified.