PIC18LF4553-I/ML - 8-bit 48MHz USB MCU 32KB Flash | Microchip
Référence : PIC18LF4553-I/ML ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $7.95 | $7,95 |
| 10 | $7.15 | $71,50 |
| 100 | $6.4 | $640,00 |
| 500 | $5.75 | $2 875,00 |
| 1 000 | $5.1 | $5 100,00 |
PIC18LF4553-I/ML Présentation
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, RAM, and peripherals. PIC18 microcontrollers use Microchip's enhanced Harvard RISC architecture, achieving 200 ns instruction execution and up to 12 MIPS throughput. Within the broader semiconductor taxonomy, MCUs sit under microcontrollers -> processors -> semiconductors, and they form the lowest tier of computing devices for embedded systems where cost, deterministic timing, and peripheral integration matter more than raw compute throughput.
Key features include Full-Speed USB 2.0 device/host/OTG support with an internal 3.3V regulator, a 10-bit ADC pre-scaler, two CCP/ECCP modules for PWM and capture/compare, I2C, SPI, and an enhanced USART for serial communication. The device also provides nanoWatt Technology with multiple idle/sleep modes, a programmable brown-out reset (BOR), a hardware watchdog timer (WDT), and high/low-voltage detect (HLVD) for robust operation in industrial environments. The on-chip 32 KB self-programmable flash supports boot-loader and in-application programming via USB, simplifying field firmware updates.
Architecturally, the PIC18LF4553 uses an enhanced 16-bit instruction word with 8-bit data paths and a 31-level hardware stack, providing deterministic interrupt response essential for real-time USB stacks. The internal 3.3V regulator can supply the USB transceiver while the core runs from 5V, eliminating the need for external LDO when designing USB peripherals on 5V rails.
Typical applications include USB HID peripherals such as custom keyboards and mice, USB-to-UART bridges, industrial data loggers with USB connectivity, and low-power sensor nodes that occasionally wake up to enumerate as USB devices. Designers should add a 1uF bypass capacitor near the VUSB3V3 pin and follow Microchip's USB hardware checklist for EMI/ESD compliance when targeting industrial temperature grades.
Alternatives de remplacement direct pour PIC18LF4553-I/ML — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC18LF4553-I/ML (même facteur de forme et même empreinte) — différant par Package, ADC, Program Memory (Flash), Operating Temperature, Timers.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC18F4553-I/ML
✅ Remplacement direct✓ En stock
$5.1 / unité
Voir la fiche technique →PIC18LF4550-I/ML
✅ Remplacement direct✓ En stock
$5.4 / unité
Voir la fiche technique →PIC18F4550-I/ML
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC18LF4455-I/ML
✅ Remplacement direct✓ En stock
$3 / unité
Voir la fiche technique →PIC18LF4458-I/ML
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC18LF4553-I/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC18LF4553-I/ML Valeurs maximales et caractéristiques électriques
| Core Processor | PIC |
| Core Size | 8-Bit |
| Series | PIC 18F |
| Program Memory Size | 32 KB Flash |
| RAM Size | 2048 B |
| EEPROM Size | 256 B |
| Maximum Clock Speed | 48 MHz |
| Instruction Throughput | 12 MIPS |
| Supply Voltage (VDD) | 2.0 V to 5.5 V |
| Température de fonctionnement | -40 C to +85 C (Industrial) |
| Boîtier | 44-VQFN Exposed Pad (ML) |
| Type de montage | Surface Mount |
| Connectivity | I2C, SPI, UART/USART, USB |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| ADC Resolution | 12-bit, up to 13 channels |
| USB | USB 2.0 Full-Speed Device/Host/OTG with internal 3.3V regulator |
| Statut RoHS | Compliant |
| Lead-Free | Yes |
Configuration des broches de PIC18LF4553-I/ML
| Broche 1 | RA2 — Port A bit 2 / analog channel AN2 |
| Broche 2 | RA3 — Port A bit 3 / analog channel AN3 / VREF+ |
| Broche 3 | RA4 — Port A bit 4 / analog channel AN4 |
| Broche 4 | RA5 — Port A bit 5 / analog channel AN5 / HLVDIN |
| Broche 5 | VSS — Ground reference |
| Broche 6 | RA6 — Port A bit 6 / oscillator output |
| Broche 7 | RA7 — Port A bit 7 / oscillator input |
| Broche 8 | VDD — Positive supply voltage (2.0-5.5 V) |
| Broche 9 | RE3 — Port E bit 3 / MCLR (programming/reset) |
| Broche 10 | VUSB — USB power monitor / internal 3.3V regulator output |
| Broche 11 | RB0 — Port B bit 0 / analog channel AN12 |
| Broche 12 | RB1 — Port B bit 1 / analog channel AN10 |
| Broche 13 | RB2 — Port B bit 2 / analog channel AN8 |
| Broche 14 | RB3 — Port B bit 3 / analog channel AN9 / CCP2 |
| Broche 15 | RB4 — Port B bit 4 / analog channel AN11 |
| Broche 16 | RB5 — Port B bit 5 / analog channel AN13 |
| Broche 17 | RB6 — Port B bit 6 / PGC (ICSP clock) |
| Broche 18 | RB7 — Port B bit 7 / PGD (ICSP data) |
| Broche 19 | VSS — Ground reference |
| Broche 20 | VDD — Positive supply voltage (2.0-5.5 V) |
| Broche 21 | RC0 — Port C bit 0 / analog channel AN4 |
| Broche 22 | RC1 — Port C bit 1 / analog channel AN5 |
| Broche 23 | RC2 — Port C bit 2 / analog channel AN6 / CCP1 |
| Broche 24 | VDD — Positive supply voltage (USB transceiver internal) |
| Broche 25 | VSS — Ground reference (USB transceiver) |
| Broche 26 | RC4 — Port C bit 4 / D- (USB data minus) |
| Broche 27 | RC5 — Port C bit 5 / D+ (USB data plus) |
| Broche 28 | RC6 — Port C bit 6 / TX (USART async transmit) |
| Broche 29 | RC7 — Port C bit 7 / RX (USART async receive) |
| Broche 30 | RD0 — Port D bit 0 / PSP data |
| Broche 31 | RD1 — Port D bit 1 / PSP data |
| Broche 32 | RD2 — Port D bit 2 / PSP data |
| Broche 33 | RD3 — Port D bit 3 / PSP data |
| Broche 34 | RD4 — Port D bit 4 / PSP data |
| Broche 35 | RD5 — Port D bit 5 / PSP data |
| Broche 36 | RD6 — Port D bit 6 / PSP data |
| Broche 37 | RD7 — Port D bit 7 / PSP data |
| Broche 38 | VSS — Ground reference |
| Broche 39 | VDD — Positive supply voltage (2.0-5.5 V) |
| Broche 40 | RE0 — Port E bit 0 / analog channel AN5 |
| Broche 41 | RE1 — Port E bit 1 / analog channel AN6 |
| Broche 42 | RE2 — Port E bit 2 / analog channel AN7 |
| Broche 43 | OSC1 — Oscillator input / external clock input |
| Broche 44 | OSC2 — Oscillator output |
Applications typiques
PIC18LF4553-I/ML convient pour 6 applications: USB HID Peripherals (Keyboard / Mouse / Gamepad), USB-to-UART Bridge / Virtual COM Port, Industrial USB Data Logger, Battery-Powered USB Sensor Node, USB Host / OTG Embedded Controller, Educational USB Development Platform.
USB HID Peripherals (Keyboard / Mouse / Gamepad)
The PIC18LF4553-I/ML is purpose-designed for USB Human Interface Devices. Its Full-Speed USB 2.0 SIE plus internal 3.3V regulator eliminates the external LDO needed by most 5V MCUs, shrinking PCB area. With 32 KB flash and 12 MIPS, it runs Microchip's USB Framework HID class driver comfortably, including boot-loader-based field firmware updates. The 12-bit ADC and PWM peripherals support multi-channel analog inputs and RGB LED drive typical of premium gaming peripherals, while nanoWatt idle modes extend battery life in wireless HID dongles.
Recommandé
USB-to-UART Bridge / Virtual COM Port
The PIC18LF4553-I/ML's integrated USB SIE and enhanced USART allow it to implement CDC-class virtual COM port bridges without an external converter IC. With 48 MHz CPU and 2048 B RAM, throughput easily exceeds the 12 Mbps USB Full-Speed envelope for typical serial rates up to 921600 bps. The wide 2.0-5.5 V supply lets the same firmware serve both 3.3V MCUs and legacy 5V RS-232 gear via level shifters. Industrial-grade -40C to +85C operation makes it suitable for factory-floor serial bridges.
Recommandé
Industrial USB Data Logger
The 32 KB flash and 256 B EEPROM are sufficient for storing configuration and calibration tables in a USB-tethered industrial data logger. The 12-bit ADC with up to 13 channels digitizes multiple sensor inputs (temperature, pressure, 4-20 mA loops via shunt), while the 44-VQFN exposed pad dissipates heat during continuous USB-powered acquisition. Brown-out reset and HLVD guard against industrial supply glitches, and the -40C to +85C industrial temperature range supports factory environments. USB plug-and-play eliminates custom driver installation.
Recommandé
Battery-Powered USB Sensor Node
The 'LF' prefix denotes the 2.0-5.5 V wide-voltage nanoWatt variant, allowing the PIC18LF4553-I/ML to run from a single Li-ion cell (3.0-4.2 V) while charging and still maintaining USB enumeration. nanoWatt idle modes drop quiescent current below 100 nA in sleep, and the internal 3.3V regulator powers the USB pull-up only when connected. The 48 MHz core wakes from sleep, runs sensor acquisition, and pushes data over USB CDC or HID within milliseconds, preserving battery life between measurement intervals.
Recommandé
USB Host / OTG Embedded Controller
In USB host mode the PIC18LF4553-I/ML can interface to USB mass storage, HID, or CDC devices, enabling embedded products that read USB flash drives or interface to USB printers without a PC. The 32 KB flash holds a simplified USB host stack plus FAT file-system library from Microchip. With 2048 B RAM, small file-buffer operations are feasible; for full mass-storage support, designers typically use the 4553 as co-processor alongside a higher-RAM MCU. The wide VDD range supports bus-powered host hubs from 5V supply.
Recommandé
Educational USB Development Platform
The PIC18LF4553-I/ML is a staple in university and hobbyist USB projects because Microchip's MPLAB X IDE, XC8 compiler, and USB Framework are free and well documented. With 32 KB flash it runs full HID, CDC, and bootloader examples, while the 44-VQFN breakout boards expose USB, ADC, PWM, and I/O pins for lab work. The 48 MHz core plus 12-bit ADC allows timing experiments and instrumentation projects at undergraduate level. The exposed thermal pad simplifies hand-soldering prototypes on standard breakout PCBs.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC18LF4553-I/ML — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC18F4553-I/ML | PIC18LF4550-I/ML | PIC18F4550-I/ML | PIC18LF4455-I/ML | PIC18LF4553-I/PT |
|---|---|---|---|---|---|---|
| Package | 44-VQFN Exposed Pad (ML) | 44-VQFN Exposed Pad (ML) - same | 44-VQFN Exposed Pad (ML) - same | 44-VQFN Exposed Pad (ML) - same | 44-VQFN Exposed Pad (ML) - same | 44-TQFP (PT) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Operating Voltage | 2.0 V to 5.5 V | 4.2 V to 5.5 V | 2.0 V to 5.5 V | 4.2 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V |
| Program Flash | 32 KB | 32 KB | 32 KB | 32 KB | 24 KB (-25%) | 32 KB |
| RAM | 2048 B | 2048 B | 2048 B | 2048 B | 2048 B | 2048 B |
| USB 2.0 FS | Yes (SIE + internal 3.3V) | Yes | Yes | Yes | Yes | Yes |
| ADC Resolution / Channels | 12-bit / 13 channels | 12-bit / 13 channels | 12-bit / 13 channels | 12-bit / 13 channels | 12-bit / 13 channels | 12-bit / 13 channels |
| Max Clock Speed | 48 MHz / 12 MIPS | 48 MHz / 12 MIPS | 48 MHz / 12 MIPS | 48 MHz / 12 MIPS | 48 MHz / 12 MIPS | 48 MHz / 12 MIPS |
| Operating Temperature | -40 C to +85 C (Industrial) | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
Principaux différenciateurs
- Wide 2.0-5.5 V VDD range with nanoWatt low-power modes (vs PIC18F4553-I/ML)
- Integrated USB 2.0 Full-Speed with on-chip 3.3V regulator (vs PIC18LF4458-I/ML)
- Same silicon in QFP for easier prototyping and rework (vs PIC18LF4553-I/PT)
Notes de conception
Estimated: At 48 MHz CPU clock, VDD 5.0 V, full USB peripheral set active, the PIC18LF4553-I/ML draws approximately 25 mA core current. From a 5V/500 mA USB VBUS source the internal 3.3V regulator supplies the USB transceiver, leaving ample headroom for external sensors. When running from a 3.3V rail, disable the internal regulator and tie VUSB to VDD to avoid contention. Decouple each VDD/VSS pair with 100 nF X7R placed within 5 mm of the pins to suppress switching noise.
The 44-VQFN (ML) package has an exposed thermal pad that MUST be soldered to a copper pour on the PCB (at least 1 sq inch) and tied to VSS for both thermal dissipation and ground return. Route the USB D+/D- differential pair as an 90-ohm impedance-matched pair with length matching within 2 mm. Place the 12 MHz crystal within 5 mm of OSC1/OSC2 with short, symmetric traces and a guard ground on the far side to minimize EMI susceptibility.
Do not confuse the 'F' (4.2-5.5 V) and 'LF' (2.0-5.5 V) variants - firmware will not enumerate USB below 4.2 V on F parts. The VUSB pin is the internal 3.3V regulator output in self-powered mode; it requires a 220 nF to 1 uF decoupling capacitor and must NOT be used as a load driver. The MCLR pin (RE3) is input-only on the LF4553 family - do not drive it as an output. Finally, the ICSP pins RB6/RB7 must not be pulled low at reset if in-circuit debugging is desired.
For USB Full-Speed compliance, add a 1.5 kohm pull-up on D+ (or D- for low-speed) through a soft-disconnect FET controlled by firmware, and place 27-33 ohm series resistors close to the MCU pins on each data line. The internal 3.3V regulator's stability depends on its 220 nF ceramic output capacitor with ESR below 0.5 ohm; X5R/X7R dielectrics are recommended. For noise-sensitive analog channels, place the ADC reference decoupling (100 nF + 10 uF) within 3 mm of AVDD/AVSS pins.
Informations de conformité
RoHS and lead-free per Microchip product page; REACH compliance statement available on manufacturer documentation; AEC-Q100 not applicable for industrial-grade USB MCU.
