PIC24FJ1024GA610-I/BG - 16-bit 1MB Flash MCU, 100-TFBGA | Microchip
Référence : PIC24FJ1024GA610-I/BG ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $12.4 | $12,40 |
| 10 | $11.15 | $111,50 |
| 100 | $9.95 | $995,00 |
| 500 | $9.05 | $4 525,00 |
| 1 000 | $8.2 | $8 200,00 |
PIC24FJ1024GA610-I/BG Présentation
A 16-bit microcontroller is a microprocessor whose data path is 16 bits wide, sitting between 8-bit MCUs (lower cost, lower performance) and 32-bit MCUs (higher performance, higher power). The PIC24F family uses a modified Harvard architecture with separate program and data buses plus a 16-bit instruction set optimized for compiled C code, targeting applications that need more performance than 8-bit parts but where cost and power must remain modest. In the broader taxonomy, PIC24F belongs to Microcontroller -> Microprocessor -> Integrated Circuit -> Semiconductor.
Key features include 1 MB (1024 KB) dual-bank Flash with Live Update firmware swap, 32 KB SRAM, 8-channel DMA, five 16-bit timers, five input-capture and five output-compare/PWM modules, two I2C, three SPI, and four UART modules. The integrated 32-bit CRC, RTCC with calendar mode, and Peripheral Pin Select (PPS) provide flexibility for low-power industrial and consumer designs. Up to 85 digital I/O lines (shared with analog) and a 10/12-bit ADC with up to 24 channels allow dense sensor interfaces.
Typical applications include industrial control panels with segmented LCD or TFT displays, portable medical monitoring devices, USB-connected data loggers, low-power IoT edge nodes, and consumer appliances requiring USB OTG and capacitive touch (mTouch). The TFBGA-100 package (10x10 mm, 0.5 mm pitch) supports compact handheld form factors.
When designing with this MCU, allocate sufficient decoupling (100 nF on every VDD/VSS pair plus bulk) and follow Microchip's trace-length rules for USB DP/DN to maintain 2.0 full-speed compliance. Live Update firmware requires the dual-partition boot sequence described in the Microchip application note library - omitting the swap protocol leaves the device bricked during failed updates. The BG (TFBGA-100) package is more challenging to rework than the PT (TQFP-100) variant, so choose the PT footprint for prototypes that may need socket rework.
Alternatives de remplacement direct pour PIC24FJ1024GA610-I/BG — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC24FJ1024GA610-I/BG (même facteur de forme et même empreinte) — différant par Package, ADC, Core Architecture, Operating Temperature, Program Memory (Flash).
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC24FJ1024GB610-I/BG
✅ Remplacement direct✓ En stock
$7.44 / unité
Voir la fiche technique →PIC24FJ1024GA610T-I/BG
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC24FJ1024GA610-E/BG
✅ Remplacement direct✓ En stock
$7.1 / unité
Voir la fiche technique →PIC24FJ1024GB610-I/BG
✅ Remplacement direct✓ En stock
$7.44 / unité
Voir la fiche technique →PIC24FJ1024GA610-I/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC24FJ1024GA610-I/BG Valeurs maximales et caractéristiques électriques
| CPU Architecture | 16-bit modified Harvard |
| CPU Family | PIC24F |
| Instruction Set | 16-bit |
| Max CPU Speed | 32 MHz (8 MIPS with 4x PLL) |
| Program Memory (Flash) | 1024 KB (1 MB) dual partition |
| Data Memory (SRAM) | 32 KB |
| Operating Voltage | 2.0 V to 3.6 V |
| I/O Pins | 85 (max) |
| ADC | 10/12-bit, up to 24 channels |
| USB | USB 2.0 Full-Speed OTG |
| Timers | 5 x 16-bit |
| Input Capture / Output Compare / PWM | 5 / 5 (16-bit) |
| UART | 4 |
| SPI | 3 |
| I2C | 2 |
| DMA Channels | 8 |
| RTCC | Yes, with calendar mode |
| Température de fonctionnement | -40C to +85C (industrial, -I) |
| Boîtier | 100-ball TFBGA (BG), 10x10 mm |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
| Live Update / Dual-Bank Flash | Yes |
Guide de configuration des broches du PIC24FJ1024GA610-I/BG 100-ball tfbga (bg), 10x10 mm
Configuration des broches du PIC24FJ1024GA610-I/BG (boîtier 100-ball tfbga (bg), 10x10 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour PIC24FJ1024GA610-I/BG.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PIC24FJ1024GA610-I/BG convient pour 6 applications: Industrial HMI Control Panels, Portable Medical Monitoring Devices, USB-Connected Data Loggers, Low-Power IoT Edge Nodes, Consumer Appliances with USB OTG, Capacitive Touch HMI with mTouch.
Industrial HMI Control Panels
The PIC24FJ1024GA610-I/BG fits industrial HMI panels because it combines 1 MB Flash for graphics assets and multi-language UI strings with 32 KB SRAM for frame buffers. Its 85 I/O pins drive segmented LCDs, keypads, and LEDs directly. Live Update dual-partition Flash allows safe OTA firmware rollout on factory floors without downtime. The 32 MHz core renders menus quickly while XLP modes keep standby under 1 uA between button presses.
Recommandé
Portable Medical Monitoring Devices
Battery-powered medical devices such as pulse oximeters, glucose meters, and portable ECG monitors benefit from the PIC24FJ1024GA610-I/BG's XLP deep-sleep current and 10/12-bit ADC accuracy for sensor readout. The 1 MB Flash stores waveform captures and lookup tables, while USB OTG enables data transfer to a clinic PC. The -I industrial temperature range covers body-worn and clinical environments, and the RTCC with VBAT domain keeps timestamps accurate across battery swaps.
Recommandé
USB-Connected Data Loggers
The PIC24FJ1024GA610-I/BG's integrated USB 2.0 full-speed OTG controller makes it ideal for USB stick-style data loggers used in environmental monitoring and industrial telemetry. The 1 MB Flash stores weeks of sensor samples, while the 8-channel DMA offloads ADC and UART transfers without CPU intervention. Up to four UARTs and three SPI buses let the device aggregate multiple sensor channels, and the 32 MHz core handles CSV encoding and USB transfers in real time.
Recommandé
Low-Power IoT Edge Nodes
IoT edge nodes for smart buildings and asset tracking leverage the PIC24FJ1024GA610-I/BG's combination of 1 MB Flash for MQTT/TLS stacks, XLP sleep modes below 1 uA, and multiple low-power serial interfaces (2x I2C, 3x SPI, 4x UART) for sensor and radio connectivity. Live Update firmware lets vendors push security patches to deployed units without service windows. The 85 I/O lines accommodate many digital sensors in a single node.
Recommandé
Consumer Appliances with USB OTG
Consumer appliances such as coffee machines, smart kitchen hubs, and connected washing machines use the PIC24FJ1024GA610-I/BG for USB OTG firmware update ports and capacitive touch (mTouch) user interfaces. The 1 MB Flash accommodates multiple languages and graphics assets, while 85 I/O pins drive motor controllers and sensor feedback loops. The XLP modes keep standby power compliant with energy-star regulations.
Recommandé
Capacitive Touch HMI with mTouch
The PIC24FJ1024GA610-I/BG's integrated mTouch hardware and CTMU peripheral enable robust capacitive touch keypads and sliders for white-goods and industrial front panels. Its 1 MB Flash stores multi-language UI strings and gesture libraries, while 32 KB SRAM supports touch decoding algorithms. The peripheral pin select (PPS) feature lets designers remap touch channels to nearly any I/O, simplifying PCB layout for irregular panel shapes.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC24FJ1024GA610-I/BG — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC24FJ1024GB610-I/BG | PIC24FJ1024GA610T-I/BG | PIC24FJ1024GA610-E/BG | PIC24FJ1024GA610-I/PT |
|---|---|---|---|---|---|
| Package | 100-ball TFBGA (BG) | 100-ball TFBGA (BG) - same | 100-ball TFBGA (BG) - same | 100-ball TFBGA (BG) - same | TQFP-100 (PT) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Speed | 32 MHz (8 MIPS) | 32 MHz (8 MIPS) | 32 MHz (8 MIPS) | 32 MHz (8 MIPS) | 32 MHz (8 MIPS) |
| Program Memory | 1024 KB Flash | 1024 KB Flash | 1024 KB Flash | 1024 KB Flash | 1024 KB Flash |
| SRAM | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| Operating Temperature | -40C to +85C (industrial) | -40C to +85C | -40C to +85C | -40C to +125C (extended) | -40C to +85C |
| Crypto Engine | No | Yes (AES, RNG) | No | No | No |
| Dual-Partition Live Update Flash | Yes | Yes | Yes | Yes | Yes |
Principaux différenciateurs
- 1 MB dual-partition Flash with Live Update OTA (vs PIC24FJ1024GB610-I/BG)
- Industrial temperature range with TFBGA footprint (vs PIC24FJ1024GA610-E/BG)
- Hand-rework friendly TQFP-100 variant available (vs PIC24FJ1024GA610-I/PT)
Notes de conception
Place a 100 nF 0402 decoupling capacitor within 2 mm of every VDD/VSS pair on the PIC24FJ1024GA610-I/BG, plus a single 10 uF bulk capacitor near the power-pin cluster. The 100-ball TFBGA package uses 0.5 mm pitch - escape traces through the inner layers using microvias (8 mil pad, 4 mil drill). Add a ground pour beneath the BGA stitched with thermal vias every 2 mm to reduce ground bounce and improve thermal dissipation during full-speed USB operation.
Do not skip the Live Update firmware swap protocol when implementing OTA updates. According to Microchip application notes, the dual-partition structure requires the bootloader to verify the new image CRC32, mark it as active, and only then swap the bank pointer. Omitting the CRC check leaves the device bricked after a corrupted update. Always test the swap path on bench units before deploying to production fleets.
For USB 2.0 full-speed compliance on the PIC24FJ1024GA610-I/BG, route the D+ and D- traces as a 90-ohm differential pair with length matching within 2 mm. Keep total trace length under 50 mm and avoid routing near high-frequency switching nodes. Place the 27-ohm series damping resistors within 4 mm of the MCU pins. The VUSB pin requires a 0.1 uF decoupling capacitor regardless of whether USB bus power is used.
Estimated: at 32 MHz active core, 3.3 V supply, and 85% I/O toggle load, the PIC24FJ1024GA610-I/BG dissipates approximately 90 mW (estimated based on typical PIC24F XLP core current of ~25 mA). The 100-ball TFBGA has theta-JA around 35 C/W on a 4-layer JEDEC test board, giving a junction temperature rise of ~3 C above ambient - well within limits. In enclosed housings with poor airflow, derate ambient by 10 C to be safe.
Informations de conformité
RoHS compliant per Microchip product page. Not AEC-Q100 qualified; for automotive designs choose PIC24FJ1024GA610-E/BG with extended temperature range. Lead-free and halogen-free packaging.
