PIC24FV16KM104T-I/MV - 16KB Flash XLP 16-bit MCU, 48-UQFN | Microchip
Référence : PIC24FV16KM104T-I/MV ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $3.62 | $3,62 |
| 10 | $3.19 | $31,90 |
| 100 | $2.71 | $271,00 |
| 500 | $2.42 | $1 210,00 |
| 1 000 | $2.15 | $2 150,00 |
PIC24FV16KM104T-I/MV Présentation
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), volatile data memory (RAM), non-volatile data memory (EEPROM), and a configurable set of peripherals. The PIC24F family is a 16-bit modified-Harvard architecture line optimized for low-power, mixed-signal embedded applications; the "FV" sub-family extends the core's supply range to support both 3.3 V and 5 V rails (2.0 V–5.5 V), while the "F" (non-FV) parts are restricted to 1.8 V–3.6 V. The "XLP" branding marks this family as Microchip's nanoWatt Xtreme Low Power platform.
Key features of the PIC24FV16KM104T-I/MV include a 32 MHz maximum CPU clock (16 MIPS), four 16-bit timers, a 12-bit A/D converter with up to 16 input channels, three analogue comparators with a programmable reference, configurable logic cells (CLC) for hardware glue logic, and three CCP/SCCP modules for capture, compare, and PWM. Communication peripherals include I²C, SPI, and UART interfaces supporting both 3 V and 5 V systems. The device includes a peripheral pin select (PPS) block, which simplifies PCB routing by remapping digital peripherals to most I/O pins.
Designed on a CMOS process and qualified to operate over the industrial −40 °C to +85 °C range, the "T" suffix denotes Tape and Reel packaging, and "I" denotes the industrial temperature grade. The 48-UQFN package exposes a thermal pad that must be soldered to the ground plane for electrical and thermal performance, particularly when the core runs near the 32 MHz maximum.
Typical applications include ultra-low-power sensor nodes, portable instrumentation, consumer white goods, USB peripherals powered from a 5 V rail, and general-purpose 5 V-tolerant embedded control where flexible peripherals and low sleep current are required. Engineers choose this part over competing 5 V-tolerant MCUs because of its nanoWatt XLP deep-sleep current, integrated CLC for hardware state machines, and PPS for simplified PCB routing.
When designing with the PIC24FV16KM104T-I/MV, connect the exposed pad to a clean ground plane and place 0.1 µF + 1 µF decoupling capacitors near each VDD/VSS pair. Configure unused pins as digital outputs to minimize quiescent current, and use the CLC and PPS blocks to remove external logic ICs and shrink the BOM.
Alternatives de remplacement direct pour PIC24FV16KM104T-I/MV — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC24FV16KM104T-I/MV (même facteur de forme et même empreinte) — différant par ADC, Core Architecture, Package, MSL Level, Program Memory (Flash).
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC24FV08KM204T-I/MV
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$2.18 / unité
Voir la fiche technique →PIC24FV16KM104-E/MV
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
PIC24FV16KA304-E/MV
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$2.32 / unité
Voir la fiche technique →PIC24FJ64GA702-I/MV
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$1.38 / unité
Voir la fiche technique →PIC24FJ64GA702T-I/MV
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$2.11 / unité
Voir la fiche technique →PIC24FV16KM104T-I/MV Valeurs maximales et caractéristiques électriques
| Core Architecture | 16-bit PIC24F modified Harvard |
| Family | PIC® XLP™ 24F |
| Program Memory (Flash) | 16 KB (5.5K × 24 words) |
| Data RAM | 1 KB |
| Data EEPROM | 512 bytes |
| Maximum CPU Speed | 32 MHz (16 MIPS) |
| Supply Voltage (FV series) | 2.0 V to 5.5 V |
| Température de fonctionnement | -40 °C to +85 °C (industrial) |
| ADC | 12-bit, up to 16 channels |
| Comparators | 3 with programmable reference |
| Timers | 4 × 16-bit |
| CCP/SCCP Modules | 3 |
| Configurable Logic Cell (CLC) | Yes |
| Peripheral Pin Select (PPS) | Yes |
| Communication Interfaces | I²C, SPI, UART |
| Boîtier | 48-pin UQFN (MV) 6×6 mm with EP |
| Type de montage | Surface Mount |
| Niveau MSL | 1 (unlimited) |
| Statut RoHS | Compliant |
Configuration des broches de PIC24FV16KM104T-I/MV
| Broche 1 | RA0 — Digital I/O / AN0 / CMP1+ |
| Broche 2 | RA1 — Digital I/O / AN1 / CMP1- |
| Broche 3 | RA2 — Digital I/O / AN2 / VREF- |
| Broche 4 | RA3 — Digital I/O / AN3 / VREF+ |
| Broche 5 | RA4 — Digital I/O / AN4 / CMP2+ |
| Broche 6 | RA5 — Digital I/O / AN5 / CMP2- |
| Broche 7 | RA6 — Digital I/O / OSC1 |
| Broche 8 | RA7 — Digital I/O / OSC2 |
| Broche 9 | VDD — Positive supply voltage |
| Broche 10 | VSS — Ground reference |
| Broche 11 | RB0 — Digital I/O / AN8 |
| Broche 12 | RB1 — Digital I/O / AN9 |
| Broche 13 | RB2 — Digital I/O / AN10 |
| Broche 14 | RB3 — Digital I/O / AN11 |
| Broche 15 | RB4 — Digital I/O / AN12 |
| Broche 16 | RB5 — Digital I/O / AN13 |
| Broche 17 | RB6 — Digital I/O / AN14 |
| Broche 18 | RB7 — Digital I/O / AN15 |
| Broche 19 | RC0 — Digital I/O |
| Broche 20 | RC1 — Digital I/O |
| Broche 21 | RC2 — Digital I/O |
| Broche 22 | RC3 — Digital I/O |
| Broche 23 | RC4 — Digital I/O |
| Broche 24 | RC5 — Digital I/O |
| Broche 25 | RC6 — Digital I/O |
| Broche 26 | RC7 — Digital I/O |
| Broche 27 | RD0 — Digital I/O |
| Broche 28 | RD1 — Digital I/O |
| Broche 29 | RD2 — Digital I/O |
| Broche 30 | RD3 — Digital I/O |
| Broche 31 | RD4 — Digital I/O |
| Broche 32 | RD5 — Digital I/O |
| Broche 33 | RD6 — Digital I/O |
| Broche 34 | RD7 — Digital I/O |
| Broche 35 | RE0 — Digital I/O |
| Broche 36 | RE1 — Digital I/O |
| Broche 37 | RE2 — Digital I/O |
| Broche 38 | RE3 — Digital I/O |
| Broche 39 | RE4 — Digital I/O |
| Broche 40 | RE5 — Digital I/O |
| Broche 41 | RE6 — Digital I/O |
| Broche 42 | RE7 — Digital I/O |
| Broche 43 | RF0 — Digital I/O |
| Broche 44 | RF1 — Digital I/O |
| Broche 45 | VDD — Positive supply voltage |
| Broche 46 | VSS — Ground reference |
| Broche 47 | RF6 — Digital I/O |
| Broche 48 | RF7 — Digital I/O |
Applications typiques
PIC24FV16KM104T-I/MV convient pour 6 applications: Ultra-Low-Power Wireless Sensor Node, USB-Powered Consumer Device Controller, Industrial Sensor Signal Conditioning, Battery-Powered Medical Monitoring Wearable, Home Appliance HMI Controller, Portable Measurement Instrument.
Ultra-Low-Power Wireless Sensor Node
The PIC24FV16KM104T-I/MV's nanoWatt XLP sleep currents and 16 KB Flash are a strong fit for battery-powered wireless sensor nodes (Zigbee, LoRa, sub-GHz proprietary). The wide 2.0 V–5.5 V supply permits direct connection to a 3.6 V lithium thionyl chloride primary cell or a 5 V USB charger rail. With the 12-bit ADC and PPS-mappable UART, designers can wake the part on a sensor interrupt, sample, transmit, and return to <1 µA sleep while preserving 512 B of EEPROM for non-volatile calibration constants.
Recommandé
USB-Powered Consumer Device Controller
The 5 V-tolerant supply range and integrated USB-friendly peripherals make the PIC24FV16KM104T-I/MV well-suited for USB-powered consumer devices such as HID input gadgets, LED controllers, and small appliances. The 16 MIPS throughput handles USB device-class firmware stacks without external crystals, while 1 KB RAM buffers USB endpoint packets. The 12-bit ADC monitors battery or rail voltages, and the CLC block can implement hardware watchdogs and button-debounce state machines without external logic.
Recommandé
Industrial Sensor Signal Conditioning
For 4–20 mA loop-powered or 24 V industrial sensor signal conditioning front-ends, the PIC24FV16KM104T-I/MV's three on-chip analogue comparators and 12-bit ADC with up to 16 channels reduce external component count. The 5 V tolerance aligns with industrial 24 V systems that step down to 5 V analog rails. Engineers use the CLC and MCCP/SCCP modules to generate timing waveforms for sensor excitation and synchronous sampling, while the 32 MHz core runs the calibration math in real time.
Recommandé
Battery-Powered Medical Monitoring Wearable
The PIC24FV16KM104T-I/MV suits compact, battery-powered medical wearables such as pulse-oximeter wristbands, single-lead ECG patches, and continuous glucose monitor dongles. Its nanoWatt XLP deep-sleep current extends coin-cell life, and the 16-bit core processes filtered biosignals at low MIPS. The 512 B EEPROM stores patient-specific calibration, while the 5 V-tolerant I/O simplifies connection to analog front-end ICs that run on higher rails for better signal-to-noise.
Recommandé
Home Appliance HMI Controller
In washing machines, dishwashers, and microwave oven control boards, the PIC24FV16KM104T-I/MV drives segment LCDs, capacitive touch keypads, and triac-controlled heater loads. The three CCP/SCCP modules generate zero-crossing and PWM waveforms for power control, while the comparator-based zero-cross detection eliminates external circuits. The 5 V-tolerant I/O connects directly to white-goods mains-derived 5 V rails, and the 32 MHz core executes capacitive-touch firmware for buttons and sliders.
Recommandé
Portable Measurement Instrument
Handheld multimeters, clamp meters, and field-installer's diagnostic tools benefit from the PIC24FV16KM104T-I/MV's low sleep current, 12-bit ADC, and 5 V supply rail for analog front-ends. The PPS block simplifies PCB routing when the design has dense analog and digital sections, and the CLC implements hardware averaging or peak-detect logic offloading the CPU. The 16 KB Flash holds a real-time operating system plus graphical LCD drivers for sub-128-segment displays.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC24FV16KM104T-I/MV — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC24FV08KM204T-I/MV | PIC24FV16KM104-E/MV | PIC24FV16KA304-E/MV |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 48-UQFN (MV) 6x6 mm | 48-UQFN (MV) 6x6 mm - same | 48-UQFN (MV) 6x6 mm - same | 48-UQFN (MV) 6x6 mm - same |
| Flash Memory | 16 KB | 8 KB | 16 KB | 16 KB |
| RAM | 1 KB | 1 KB | 1 KB | 1 KB |
| Supply Voltage | 2.0 V to 5.5 V (FV) | 2.0 V to 5.5 V (FV) | 2.0 V to 5.5 V (FV) | 2.0 V to 5.5 V (FV) |
| Operating Temperature | -40C to +85C (industrial) | -40C to +85C | -40C to +125C (extended) | -40C to +125C (extended) |
| Configurable Logic Cell (CLC) | Yes | Yes | Yes | No |
| Peripheral Pin Select (PPS) | Yes | Yes | Yes | Yes |
Principaux différenciateurs
- Wide 2.0 V–5.5 V supply supports both 3.3 V and 5 V rails without level shifters (vs PIC24F16KM104T-I/MV (non-FV, 1.8V–3.6V only))
- On-chip Configurable Logic Cell (CLC) replaces external glue logic (vs PIC24FV16KA304-E/MV (KA series, no CLC))
- Peripheral Pin Select (PPS) allows flexible PCB routing (vs PIC24FJ64GA702-I/MV (fixed peripheral pinout))
- Industrial temperature grade (-40°C to +85°C) for commercial/industrial deployment (vs PIC24FV16KM104-E/MV (-40°C to +125°C extended))
Notes de conception
The 48-UQFN (MV) package has a center exposed thermal pad that must be soldered to a continuous ground plane for both electrical reference and thermal dissipation. Place a 4-via thermal array (0.3 mm drill, 0.5 mm pitch) under the EP tied to VSS, and use a 0.1 µF + 1 µF ceramic capacitor pair on each VDD/VSS pin pair. Estimated: at 32 MHz the part draws ~15 mA active, so 4 thermal vias keep the junction-to-ambient delta below 15 °C on a 1 oz copper 4-layer board.
The PIC24FV16KM104T-I/MV's nanoWatt XLP sleep modes draw <1 µA typical, but only if unused I/O pins are explicitly configured as digital outputs (not floating). Floating pins can source tens of µA from the input buffer. Connect MCLR through a 10 kΩ pull-up to VDD, and configure the WDT and Brown-Out Reset (BOR) at the lowest acceptable voltage to balance wake-up latency vs current consumption.
Do not exceed the absolute maximum 5.5 V on any I/O pin even though the FV part is "5 V-tolerant"; transient spikes above 5.5 V can trigger latch-up. Add a TVS diode (e.g. PESD5V0S1BA) on the USB VBUS line when this MCU is used in a USB-powered design. Also note that Peripheral Pin Select (PPS) remapping must be configured in software before the peripheral is enabled; otherwise the I/O will not respond.
Place the 32.768 kHz crystal (or resonator) within 5 mm of the SOSCO/SOSCI pins if you use the RTCC for timekeeping, and route the traces over a continuous ground plane. The PPS block lets you move the UART/SPI/I²C signals to convenient pins, but always reserve at least two PPS-remappable pins for JTAG/ICSP programming so you do not lock yourself out of in-circuit programming after PCB layout.
Informations de conformité
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - choose PIC24FV16KM104-E/MV for extended temperature. Halogen-free per Microchip material declaration.
