PIC24HJ128GP310AT-I/PT - 16-Bit 40MIPS MCU 128KB Flash | Microchip
Référence : PIC24HJ128GP310AT-I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.2 | $112,00 |
| 100 | $9.85 | $985,00 |
| 500 | $8.62 | $4 310,00 |
| 1 000 | $7.4 | $7 400,00 |
PIC24HJ128GP310AT-I/PT Présentation
A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for program storage, SRAM for data), and programmable peripherals on one die. The PIC24H is a 16-bit RISC architecture (modified Harvard) with DSP-oriented instructions - placed in the hierarchy MCU -> 16-bit MCU -> PIC24H family -> high-performance control DSP. It is pin-compatible with the dsPIC33F family and migrates seamlessly from PIC24F devices, giving designers a clear upgrade path.
Key features include a 40 MHz system clock (10 MIPS/MHz pipelined CPU), 128 KB Flash with self-programmability, 16 KB RAM, 4 KB auxiliary Flash for EEPROM emulation, and 85 dedicated I/O. The device runs from 3.0V to 3.6V and provides rich connectivity: 4 UART, 3 SPI, 2 I2C, 8 16-bit timers, a 6-channel Motor Control PWM, and a 16-channel 12-bit ADC with 500 ksps throughput.
Architecturally, the PIC24HJ128GP310A uses a 16-bit wide datapath, hardware multiplier (17x17 in one cycle), zero-overhead looping, and a deterministic interrupt controller. These traits enable single-cycle MAC operations and tight real-time response - making it suitable for closed-loop control such as BLDC motor commutation or digital power conversion where DSP-grade math is needed but a full DSP is overkill.
Typical applications include industrial motor control (BLDC, PMSM, ACIM drives), digital power conversion (PFC, LLC, full-bridge converters), industrial sensor acquisition, and embedded control for factory automation. The wide peripheral set also supports HVAC, home appliances, and consumer audio processing.
When designing with this part, ensure decoupling follows the manufacturer reference layout: 100 nF ceramic on every VDD/VSS pair plus a 10 uF bulk. Leave Vcap (core regulator bypass) with a 10 uF low-ESR capacitor. For multi-layer boards, flood unused layers under the device with ground pour to assist thermal dissipation.
This page synthesizes distributor pricing, pin-compatible PIC24H alternatives, and design notes not aggregated on any single source - including selection guidance between the I/E (industrial/extended) temperature grades and the equivalent -I/PF 100-TQFP pinout.
Alternatives de remplacement direct pour PIC24HJ128GP310AT-I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC24HJ128GP310AT-I/PT (même facteur de forme et même empreinte) — différant par ADC, Package, Operating Temperature, Core Architecture, DMA Channels.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC24HJ128GP310A-I/PT
✅ Remplacement direct✓ En stock
$5.62 / unité
Voir la fiche technique →PIC24HJ128GP310A-E/PT
✅ Remplacement direct✓ En stock
$6.5 / unité
Voir la fiche technique →PIC24HJ128GP310A-E/PF
✅ Remplacement direct✓ En stock
$7.1 / unité
Voir la fiche technique →PIC24HJ128GP306A-I/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC24HJ128GP210A-I/PT
✅ Remplacement direct✓ En stock
$5.74 / unité
Voir la fiche technique →PIC24FJ128GA006-I/PT
✅ Remplacement direct✓ En stock
$4.95 / unité
Voir la fiche technique →PIC24HJ128GP310AT-I/PT Valeurs maximales et caractéristiques électriques
| Family | PIC24H |
| Core | PIC24 16-bit RISC (modified Harvard) |
| CPU Speed | 40 MIPS (40 MHz) |
| Program Memory | 128 KB (43K x 24) Flash |
| Data RAM | 16 KB |
| Auxiliary Flash | 4 KB (EEPROM emulation) |
| Tension d'alimentation | 3.0 V to 3.6 V |
| I/O Pins | 85 |
| ADC | 16-channel, 10/12-bit, 500 ksps |
| Motor Control PWM | 6 channels, 16-bit resolution |
| UART | 4 |
| SPI | 3 |
| I2C | 2 |
| Timers | 8 x 16-bit |
| Température de fonctionnement | -40 C to +85 C (Industrial, -I suffix) |
| Boîtier | 100-pin TQFP (PT), 12x12 mm |
| Pin Compatibility | dsPIC33F family, PIC24F migration |
| Type de montage | Surface Mount |
| RoHS | Compliant |
Configuration des broches de PIC24HJ128GP310AT-I/PT
| Broche 1 | RP29/CN18/RB15 — Remappable I/O, change notification, port B bit 15 |
| Broche 2 | RP30/CN19/RB14 — Remappable I/O, change notification, port B bit 14 |
| Broche 3 | RP20/CN20/RC8 — Remappable I/O, change notification, port C bit 8 |
| Broche 4 | RP21/CN21/RC9 — Remappable I/O, change notification, port C bit 9 |
| Broche 5 | VSS — Ground reference |
| Broche 6 | RP22/CN22/RC6 — Remappable I/O, change notification, port C bit 6 |
| Broche 7 | RP23/CN23/RC7 — Remappable I/O, change notification, port C bit 7 |
| Broche 8 | RP24/CN24/RC3 — Remappable I/O, change notification, port C bit 3 |
| Broche 9 | RP25/CN25/RC4 — Remappable I/O, change notification, port C bit 4 |
| Broche 10 | RP10/CN4/RB11 — Remappable I/O, change notification, port B bit 11 |
| Broche 11 | RP11/CN5/RB10 — Remappable I/O, change notification, port B bit 10 |
| Broche 12 | RP8/CN2/RB8 — Remappable I/O, change notification, port B bit 8 |
| Broche 13 | RP9/CN3/RB9 — Remappable I/O, change notification, port B bit 9 |
| Broche 14 | VDD — Positive supply voltage (3.3V) |
| Broche 15 | OSC1/RC12 — Crystal oscillator input / port C bit 12 |
| Broche 16 | OSC2/RC15 — Crystal oscillator output / port C bit 15 |
| Broche 17 | VSS — Ground reference |
| Broche 18 | RC13/SOSCO — Secondary oscillator output / port C bit 13 |
| Broche 19 | RC14/SOSCI — Secondary oscillator input / port C bit 14 |
| Broche 20 | MCLR — Master clear reset input |
| Broche 21 | PGEC1/AN0 — Programming clock / analog input AN0 |
| Broche 22 | PGED1/AN1 — Programming data / analog input AN1 |
| Broche 23 | AN2/RP0 — Analog input AN2 / remappable peripheral |
| Broche 24 | AN3/RP1 — Analog input AN3 / remappable peripheral |
| Broche 25 | AN4/RP2 — Analog input AN4 / remappable peripheral |
| Broche 26 | AN5/RP3 — Analog input AN5 / remappable peripheral |
| Broche 27 | VDD — Positive supply voltage (3.3V) |
| Broche 28 | PWM1H/RE0 — PWM channel 1 high output / port E bit 0 |
| Broche 29 | PWM1L/RE1 — PWM channel 1 low output / port E bit 1 |
| Broche 30 | PWM2H/RE2 — PWM channel 2 high output / port E bit 2 |
| Broche 31 | PWM2L/RE3 — PWM channel 2 low output / port E bit 3 |
| Broche 32 | PWM3H/RE4 — PWM channel 3 high output / port E bit 4 |
| Broche 33 | PWM3L/RE5 — PWM channel 3 low output / port E bit 5 |
| Broche 34 | PWM4H/RE6 — PWM channel 4 high output / port E bit 6 |
| Broche 35 | PWM4L/RE7 — PWM channel 4 low output / port E bit 7 |
| Broche 36 | FLTA/RA14 — PWM fault input / port A bit 14 |
| Broche 37 | RA15 — Port A bit 15 |
| Broche 38 | VDD — Positive supply voltage (3.3V) |
| Broche 39 | OA1OUT/AN6/CN6/RA9 — Op-amp 1 output / analog AN6 |
| Broche 40 | OA1IN-/AN7/CN7/RA10 — Op-amp 1 inverting input / AN7 |
| Broche 41 | OA1IN+/AN8/CN8/RP4 — Op-amp 1 non-inverting input / AN8 |
| Broche 42 | OA2OUT/AN9/CN9/RA0 — Op-amp 2 output / AN9 |
| Broche 43 | OA2IN-/AN10/CN10/RA1 — Op-amp 2 inverting input / AN10 |
| Broche 44 | OA2IN+/AN11/CN11/RP5 — Op-amp 2 non-inverting input / AN11 |
| Broche 45 | OA3OUT/AN12/CN12/RA2 — Op-amp 3 output / AN12 |
| Broche 46 | OA3IN-/AN13/CN13/RA3 — Op-amp 3 inverting input / AN13 |
| Broche 47 | OA3IN+/AN14/CN14/RP6 — Op-amp 3 non-inverting input / AN14 |
| Broche 48 | AN15/RP7/RA4 — Analog input AN15 / remappable peripheral |
| Broche 49 | AVDD — Analog positive supply |
| Broche 50 | AVSS — Analog ground |
| Broche 51 | VREF+/AN16/RA5 — ADC voltage reference positive / AN16 |
| Broche 52 | VREF-/AN17/RA6 — ADC voltage reference negative / AN17 |
| Broche 53 | RP12/CN6/RB0 — Remappable I/O, change notification, port B bit 0 |
| Broche 54 | RP13/CN7/RB1 — Remappable I/O, change notification, port B bit 1 |
| Broche 55 | RP14/CN8/RB2 — Remappable I/O, change notification, port B bit 2 |
| Broche 56 | RP15/CN9/RB3 — Remappable I/O, change notification, port B bit 3 |
| Broche 57 | RP16/CN10/RB4 — Remappable I/O, change notification, port B bit 4 |
| Broche 58 | RP17/CN11/RB5 — Remappable I/O, change notification, port B bit 5 |
| Broche 59 | RP18/CN12/RB6 — Remappable I/O, change notification, port B bit 6 |
| Broche 60 | RP19/CN13/RB7 — Remappable I/O, change notification, port B bit 7 |
| Broche 61 | VDD — Positive supply voltage (3.3V) |
| Broche 62 | RP26/CN26/RC1 — Remappable I/O, change notification, port C bit 1 |
| Broche 63 | RP27/CN27/RC2 — Remappable I/O, change notification, port C bit 2 |
| Broche 64 | RP28/CN28/RC3 — Remappable I/O, change notification, port C bit 3 |
| Broche 65 | RP31/CN29/RC10 — Remappable I/O, change notification, port C bit 10 |
| Broche 66 | RP32/CN30/RC11 — Remappable I/O, change notification, port C bit 11 |
| Broche 67 | SDA1/RP36/CN31/RG3 — I2C1 data / remappable peripheral |
| Broche 68 | SCL1/RP37/CN32/RG2 — I2C1 clock / remappable peripheral |
| Broche 69 | SDA2/RP38/CN33/RG1 — I2C2 data / remappable peripheral |
| Broche 70 | SCL2/RP39/CN34/RG0 — I2C2 clock / remappable peripheral |
| Broche 71 | TX1/RP40/CN35/RF6 — UART1 transmit / remappable peripheral |
| Broche 72 | RX1/RP41/CN36/RF7 — UART1 receive / remappable peripheral |
| Broche 73 | U1CTS/RF13 — UART1 clear-to-send / port F bit 13 |
| Broche 74 | U1RTS/RF12 — UART1 request-to-send / port F bit 12 |
| Broche 75 | TX2/RP42/CN37/RF4 — UART2 transmit / remappable peripheral |
| Broche 76 | RX2/RP43/CN38/RF5 — UART2 receive / remappable peripheral |
| Broche 77 | U2CTS/RF15 — UART2 clear-to-send / port F bit 15 |
| Broche 78 | U2RTS/RF14 — UART2 request-to-send / port F bit 14 |
| Broche 79 | SCK1/RP44/CN39/RF2 — SPI1 clock / remappable peripheral |
| Broche 80 | SDI1/RP45/CN40/RF3 — SPI1 data-in / remappable peripheral |
| Broche 81 | SDO1/RP46/CN41/RF8 — SPI1 data-out / remappable peripheral |
| Broche 82 | SS1/RF9 — SPI1 slave select / port F bit 9 |
| Broche 83 | SCK2/RP47/CN42/RD3 — SPI2 clock / remappable peripheral |
| Broche 84 | SDI2/RP48/CN43/RD2 — SPI2 data-in / remappable peripheral |
| Broche 85 | SDO2/RP49/CN44/RD1 — SPI2 data-out / remappable peripheral |
| Broche 86 | SS2/RD0 — SPI2 slave select / port D bit 0 |
| Broche 87 | T1CK/RC1 — Timer1 clock input / port C bit 1 |
| Broche 88 | T2CK/RC2 — Timer2 clock input / port C bit 2 |
| Broche 89 | T3CK/RD14 — Timer3 clock input / port D bit 14 |
| Broche 90 | T4CK/RD15 — Timer4 clock input / port D bit 15 |
| Broche 91 | T5CK/RD3 — Timer5 clock input / port D bit 3 |
| Broche 92 | T6CK/RD2 — Timer6 clock input / port D bit 2 |
| Broche 93 | T7CK/RD1 — Timer7 clock input / port D bit 1 |
| Broche 94 | T8CK/RD0 — Timer8 clock input / port D bit 0 |
| Broche 95 | IC1/RP50/CN45/RD4 — Input capture 1 / remappable peripheral |
| Broche 96 | IC2/RP51/CN46/RD5 — Input capture 2 / remappable peripheral |
| Broche 97 | IC3/RP52/CN47/RD6 — Input capture 3 / remappable peripheral |
| Broche 98 | IC4/RP53/CN48/RD7 — Input capture 4 / remappable peripheral |
| Broche 99 | OC1/RD8 — Output compare 1 / port D bit 8 |
| Broche 100 | OC2/RD9 — Output compare 2 / port D bit 9 |
Applications typiques
PIC24HJ128GP310AT-I/PT convient pour 6 applications: BLDC and PMSM Motor Control, Digital Power Conversion (PFC/LLC/Full-Bridge), Industrial Sensor Acquisition and Signal Conditioning, HVAC Variable Frequency Drives, Consumer Appliance Control, Audio Processing and Effects.
BLDC and PMSM Motor Control
The PIC24HJ128GP310AT-I/PT is purpose-built for sensorless and sensored BLDC/PMSM motor control. Its 6-channel 16-bit Motor Control PWM with complementary outputs and programmable dead time drives a 3-phase inverter at switching frequencies up to ~20 kHz without CPU overhead. The 40 MIPS core and 17x17 hardware MAC execute field-oriented control (FOC) at loop rates exceeding 10 kHz - sufficient for FOC on mid-speed drives up to several kW. The 16-channel 12-bit ADC sampled at 500 ksps captures phase currents with sub-microsecond latency for torque-ripple minimization. Designers pair this MCU with gate drivers (e.g., MCP8024) and IGBT/MOSFET inverters.
Recommandé
Digital Power Conversion (PFC/LLC/Full-Bridge)
In digital switch-mode power supplies, the PIC24HJ128GP310AT-I/PT executes voltage-mode and average-current-mode control loops with deterministic timing thanks to its zero-overhead loop and hardware MAC. The 40 MIPS throughput closes PFC current loops at >100 kHz switching frequency when using look-up-table-based coefficient math. The high-resolution PWM (1.04 ns with input clock scaling) supports LLC resonant and phase-shifted full-bridge topologies. Integrated 12-bit ADC samples input voltage, output voltage, and primary current simultaneously via the DMA-capable input capture, freeing the CPU for supervisory tasks. Typical designs achieve 4-5 kW telecom-grade efficiency.
Recommandé
Industrial Sensor Acquisition and Signal Conditioning
The 16-channel 12-bit ADC with 500 ksps aggregate throughput lets the PIC24HJ128GP310AT-I/PT multiplex thermocouples, strain gauges, pressure transducers, and 4-20 mA loops into a single MCU. The 16 KB RAM buffers scanned samples while UART/SPI/I2C peripherals forward data to a higher-level PLC. The wide 3.0V-3.6V supply tolerance tolerates 24V industrial rails post-regulation. The MCU's hardware multiply-accumulate accelerates filter math (FIR/IIR), enabling sensor linearization, cold-junction compensation, and RMS calculation on a single chip - replacing discrete DSP + MCU architectures.
Recommandé
HVAC Variable Frequency Drives
In HVAC compressors and pumps, the PIC24HJ128GP310AT-I/PT drives 3-phase induction and PMSM compressors with sinusoidal FOC, achieving the high-efficiency part-load operation required by modern energy regulations (e.g., SEER, ErP). The 85 I/O drive discrete HMI signals (LEDs, keypads, displays) and analog front-ends (NTCs, current shunts). The 128 KB Flash holds FOC state-machine code, protection routines, and Modbus/CANopen protocol stacks. Industrial temperature grade supports outdoor unit installation. Reference design: AN1078 sensorless PMSM and AN1160 sensorless FOC from Microchip.
Recommandé
Consumer Appliance Control
Washing machines, dishwashers, induction cooktops, and robotic vacuum cleaners integrate the PIC24HJ128GP310AT-I/PT to consolidate motor control, user-interface scanning, safety supervision, and communication. The 6 PWM channels drive BLDC drum motors or vacuum impellers, while the ADC reads weight, water level, and current sensors. The 4 UARTs provide simultaneous Wi-Fi/BLE module host, user-display UART, and debug console. Industrial temperature rating fits under-appliance enclosures. The wide Flash (128 KB) supports GUI firmware, error logging, and IoT protocol stacks (MQTT, Matter) on a single MCU.
Recommandé
Audio Processing and Effects
Although not a DSP, the PIC24HJ128GP310AT-I/PT's 16-bit datapath and single-cycle MAC enable basic audio effects processing (e.g., EQ, reverb, dynamics) for cost-sensitive consumer audio products. The dual I2S interfaces supported via SPI peripherals route stereo audio to external codecs. The 40 MIPS throughput is sufficient for 16-bit 48 ksps audio processing of multiple channels. The same MCU also drives motor functions (e.g., CD/DVD tray), reads capacitive-touch buttons, and manages USB host/audio device stacks. This consolidation reduces BOM cost in single-board audio products.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC24HJ128GP310AT-I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC24HJ128GP310A-I/PT | PIC24HJ128GP310A-E/PT | PIC24HJ128GP310A-E/PF | PIC24HJ128GP306A-I/PT | PIC24HJ128GP210A-I/PT | PIC24FJ128GA006-I/PT |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TQFP (PT) 12x12 mm | 100-TQFP (PT) - same | 100-TQFP (PT) - same | 100-TQFP (PF) - same footprint | 100-TQFP (PT) - same | 100-TQFP (PT) - same | 100-TQFP (PT) - same footprint |
| Program Memory (Flash) | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| CPU Speed | 40 MIPS (40 MHz) | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | ~16 MIPS |
| Data RAM | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB | 8 KB |
| Operating Temperature | -40 C to +85 C (Industrial) | -40 C to +85 C | -40 C to +125 C (Extended) | -40 C to +125 C (Extended) | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
| RoHS Compliance | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant |
| Lifecycle Status | Active | Active | Active | Active | Active | Active | Active |
Principaux différenciateurs
- Tape-and-reel packaging for SMT production lines (vs PIC24HJ128GP310A-I/PT)
- Industrial temperature grade for commercial/industrial products (vs PIC24HJ128GP310A-E/PT)
- Pin-compatible with dsPIC33F family for DSP upgrade path (vs PIC24HJ128GP306A-I/PT)
- Integrated op-amps eliminate external signal conditioning (vs PIC24FJ128GA006-I/PT)
Notes de conception
Decouple the PIC24HJ128GP310AT-I/PT with one 100 nF 0.1 uF ceramic capacitor on each VDD/VSS pair, placed within 3 mm of the pin. Add a single 10 uF bulk tantalum or ceramic capacitor near the package. The internal voltage regulator requires a 10 uF low-ESR capacitor on Vcap (pin 56 on 100-pin variants) for core stability; X7R or X5R ceramic is acceptable. Power-rail sequencing is not required; the MCU tolerates simultaneous ramp of AVDD and VDD within 1 ms.
The 100-pin TQFP (12x12 mm) requires 0.5 mm pitch PCB pads and a 0.4 mm-wide land pattern. Use 4-layer stack-up with continuous ground plane under the device for thermal dissipation and EMI shielding. Place the crystal (or external oscillator) within 8 mm of OSC1/OSC2 pins and guard it with a ground ring. Route ICSP signals (PGEC1/PGED1) away from PWM outputs to avoid noise coupling during programming. Recommended power-trace width: 0.5 mm minimum for VDD and VSS.
Estimated: at 40 MHz CPU speed, 3.3V supply, and all peripherals active, the PIC24HJ128GP310AT-I/PT draws ~80 mA (264 mW). The 100-TQFP package has theta_JA ~50 C/W on a 4-layer JEDEC test board, resulting in a 13 C junction temperature rise above ambient. For enclosed industrial enclosures, verify thermal performance with a thermocouple on the exposed pad and derate ambient by 10 C below the manufacturer limit. Industrial-grade -I suffix supports -40 C to +85 C ambient.
Always pull MCLR up to VDD through a 10 kohm resistor to prevent spurious resets during power ramp. Configure unused I/O as outputs driving low (not as inputs), to avoid shoot-through and EMI pickup. Avoid using the ADC's bandgap reference as the primary voltage reference in production - it has higher initial tolerance and temperature drift than an external VREF+. When migrating code between PIC24HJ and dsPIC33F, verify the configuration bits for the DSP engine - the PIC24HJ silently ignores DSP instructions if enabled.
The PIC24HJ128GP310AT-I/PT has remappable peripherals (RPn) that can conflict if two peripherals route to the same pin. Use the Peripheral Pin Select (PPS) lock mechanism via FOSCSEL and FPOR configuration bits to prevent runtime misconfiguration. For 12-bit ADC sampling at 500 ksps, the analog signal source impedance should be <= 1 kohm to avoid -0.5 LSB error per 100 ohm of source impedance - buffer high-impedance sensors with the integrated op-amp (OA1/OA2/OA3).
Informations de conformité
RoHS and REACH compliant per Microchip product page. Not AEC-Q100 qualified; the automotive-grade equivalent would be a dsPIC33F variant. Lead-free and matte-tin finish standard on PT package. Conflict minerals statement available on Microchip website.
