PIC32MM0128GPM036T-I/M2 - 32-bit 128KB Flash USB MCU | Microchip
Référence : PIC32MM0128GPM036T-I/M2 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $3.42 | $3,42 |
| 10 | $3.08 | $30,80 |
| 100 | $2.74 | $274,00 |
| 500 | $2.45 | $1 225,00 |
| 1 000 | $2.18 | $2 180,00 |
| 3 000 | $1.95 | $5 850,00 |
PIC32MM0128GPM036T-I/M2 Présentation
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, RAM, non-volatile program memory, and peripheral interfaces on one die. The PIC32MM GPM family is Microchip's eXtreme low-power 32-bit PIC32 line, positioned as a cost-effective migration path between 16-bit PIC24/dsPIC devices and higher-end PIC32MX/MZ parts. The microAptiv core adds microMIPS code compression and DSP extensions, while the GPM family specifically adds USB and ECC memory up to 128 KB.
Key features include 21 timers, a 4-channel DMA controller, 3 analog comparators, a 12-bit ADC with up to 1 MSPS, a 5-bit DAC, and communication peripherals covering I2C, SPI, UART, LIN, and USB. The 36-pin SQFN package exposes 25+ general-purpose I/O lines and supports segmented LCD bias generation. ECC on Flash improves reliability for industrial and safety-sensitive applications, and deep sleep current is specified in the microampere range for battery operation.
Typical applications include low-power USB HID/CDC devices, sensor hubs, industrial sensor nodes, IoT end nodes with USB debugging, home automation controllers, and motor control peripheral front-ends. The USB on-chip controller eliminates an external interface chip, and the integrated 12-bit ADC supports direct sensor signal conditioning without a separate ADC IC.
When designing with this part, validate that the 36-pin SQFN land pattern is routable on your PCB and that the exposed thermal pad is soldered for reliable thermal performance. Use MPLAB X IDE with XC32 compiler and MPLAB Harmony framework for firmware development; the device is supported by Microchip's standard PIC32 toolchain.
Alternatives de remplacement direct pour PIC32MM0128GPM036T-I/M2 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MM0128GPM036T-I/M2 (même facteur de forme et même empreinte) — différant par Core Architecture, ADC, CoreMark Score, Flash ECC, Operating Temperature.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MM0128GPM036-E/M2
✅ Remplacement direct✓ En stock
$2.18 / unité
Voir la fiche technique →PIC32MM0128GPM036-I/M2
✅ Remplacement direct✓ En stock
$2.56 / unité
Voir la fiche technique →PIC32MM0128GPM036T-I/M2VAO
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC32MM0256GPM036T-I/M2
✅ Remplacement direct✓ En stock
$1.62 / unité
Voir la fiche technique →PIC32MM0064GPM036T-I/M2
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC32MM0128GPM036T-I/M2 Valeurs maximales et caractéristiques électriques
| Core Architecture | MIPS32 microAptiv (PIC32) |
| Core Bit Width | 32-bit |
| Maximum CPU Frequency | 48 MHz |
| CoreMark Score | 79 (at 25 MHz) |
| Program Memory (Flash) | 128 KB (128K x 8) |
| Flash ECC | Yes |
| Data SRAM | 16 KB |
| Operating Voltage | 3.3 V typical (2.0 V to 3.6 V) |
| Température de fonctionnement | -40C to +85C (industrial, 'I' suffix) |
| Boîtier | 36-pin SQFN (6x6 mm) with exposed pad |
| Type de montage | Surface Mount |
| Packaging Form | Tape and Reel ('T' suffix) |
| USB Controller | USB 2.0 Full-Speed, on-chip |
| ADC | 12-bit, 1 MSPS |
| DAC | 5-bit |
| DMA Channels | 4 |
| Timers | 21 |
| Comparators | 3 |
| Communication Interfaces | I2C, SPI, UART, LIN, USB |
| Statut RoHS | Compliant |
Configuration des broches de PIC32MM0128GPM036T-I/M2
| Broche 1 | RA0 — GPIO / analog input AN0 |
| Broche 2 | RA1 — GPIO / analog input AN1 |
| Broche 3 | RA2 — GPIO / analog input AN2 |
| Broche 4 | RA3 — GPIO / analog input AN3 |
| Broche 5 | VDD — Positive supply (2.0 V to 3.6 V) |
| Broche 6 | VSS — Ground |
| Broche 7 | RA4 — GPIO / analog input AN4 |
| Broche 8 | RA5 — GPIO / analog input AN5 |
| Broche 9 | RA6 — GPIO |
| Broche 10 | RA7 — GPIO |
| Broche 11 | RB0 — GPIO / PGED1 programming |
| Broche 12 | RB1 — GPIO / PGEC1 programming |
| Broche 13 | RB2 — GPIO / analog input AN3 alt |
| Broche 14 | RB3 — GPIO / analog input AN5 alt |
| Broche 15 | RB4 — GPIO / analog input AN15 |
| Broche 16 | RB5 — GPIO / analog input AN16 |
| Broche 17 | RB6 — GPIO / analog input AN17 |
| Broche 18 | RB7 — GPIO / analog input AN18 |
| Broche 19 | VSS — Ground |
| Broche 20 | VDD — Positive supply |
| Broche 21 | RC0 — GPIO |
| Broche 22 | RC1 — GPIO |
| Broche 23 | RC2 — GPIO |
| Broche 24 | RC3 — GPIO |
| Broche 25 | RC4 — GPIO |
| Broche 26 | RC5 — GPIO |
| Broche 27 | RC6 — GPIO |
| Broche 28 | RC7 — GPIO |
| Broche 29 | RC8 — GPIO |
| Broche 30 | RC9 — GPIO |
| Broche 31 | D- — USB D- data line |
| Broche 32 | D+ — USB D+ data line |
| Broche 33 | VUSB — USB internal regulator input |
| Broche 34 | OSC1 — Crystal oscillator input |
| Broche 35 | OSC2 — Crystal oscillator output |
| Broche 36 | RESET — Reset (active-low) |
Applications typiques
PIC32MM0128GPM036T-I/M2 convient pour 6 applications: Low-Power USB HID Devices, Industrial Sensor Hubs, IoT End Nodes with USB Debug, Home Automation Controllers, Motor Control Peripheral Front-End, Battery-Powered Medical Wearables.
Low-Power USB HID Devices
The PIC32MM0128GPM036T-I/M2's on-chip USB 2.0 Full-Speed controller and 128 KB Flash are well-matched for USB HID-class peripherals such as keyboards, mice, custom input devices, and diagnostic tools. The integrated USB controller eliminates an external interface chip, reducing BOM cost by $0.50-$1.00. With deep-sleep current in the microampere range, battery-powered HID dongles can run for years on a coin cell.
Recommandé
Industrial Sensor Hubs
The 12-bit 1 MSPS ADC, three analog comparators, and 4-channel DMA controller make the PIC32MM0128GPM036T-I/M2 ideal for industrial sensor hubs interfacing analog and digital sensors. The industrial -40C to +85C operating range covers factory-floor environments, while ECC Flash improves reliability for safety-sensitive applications. UART, SPI, and I2C ports allow direct connection to common sensor families without external logic.
Recommandé
IoT End Nodes with USB Debug
Low-power IoT end nodes benefit from the PIC32MM0128GPM036T-I/M2's microAptiv core efficiency plus integrated USB for firmware update and provisioning channels. The 16 KB SRAM supports FreeRTOS plus an MQTT-SNIZ lightweight agent; the 128 KB Flash accommodates TLS stacks and prior client connectivity libraries. USB simplifies field upgrades via host ports, and deep-sleep modes extend coin-cell life.
Recommandé
Home Automation Controllers
The PIC32MM0128GPM036T-I/M2 integrates USB, ADC, comparators, and multiple serial interfaces in a single 36-pin SQFN device that can serve as the brain of a home automation controller. GPIO pins drive relays, triacs, or FETs for AC load switching, while the USB port supports host-based commissioning or firmware updates. The 48 MHz MIPS32 core executes home automation stacks in real time without external memory.
Recommandé
Motor Control Peripheral Front-End
The PIC32MM0128GPM036T-I/M2's 21 timers, 3 analog comparators, and 12-bit ADC position it as a peripheral front-end for small BLDC or stepper motor controllers. The comparators support back-EMF sensing for sensorless commutation, while the timers drive PWM signals at 48 MHz resolution. Pairing with an external gate driver IC yields a compact low-power motor control node.
Recommandé
Battery-Powered Medical Wearables
The PIC32MM0128GPM036T-I/M2's low deep-sleep current, 12-bit ADC, and 128 KB Flash suit battery-powered medical wearables such as continuous glucose monitors, pulse oximeters, and activity trackers. The USB port simplifies charging dock data transfer, and the industrial temperature range tolerates body-temperature swings. ECC Flash protects against bit errors that could affect patient-data integrity.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MM0128GPM036T-I/M2 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MM0128GPM036-E/M2 | PIC32MM0128GPM036-I/M2 | PIC32MM0128GPM036T-I/M2VAO | PIC32MM0256GPM036T-I/M2 | PIC32MM0064GPM036T-I/M2 |
|---|---|---|---|---|---|---|
| Package | 36-pin SQFN (6x6 mm) | 36-pin SQFN (6x6 mm) - same | 36-pin SQFN (6x6 mm) - same | 36-pin SQFN (6x6 mm) - same | 36-pin SQFN (6x6 mm) - same | 36-pin SQFN (6x6 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | ||
| Max CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | ||
| Flash | 128 KB | 128 KB | 256 KB (+100%) | 64 KB (-50%) | ||
| SRAM | 16 KB | 16 KB | 16 KB | 16 KB | ||
| Operating Temperature | -40C to +85C | -40C to +125C (extended) | -40C to +85C | -40C to +85C | ||
| USB | USB 2.0 Full-Speed | USB 2.0 Full-Speed | USB 2.0 Full-Speed | USB 2.0 Full-Speed | ||
| ADC | — | 12-bit 1 MSPS | 12-bit 1 MSPS | 12-bit 1 MSPS |
Principaux différenciateurs
- Industrial temperature grade with ECC Flash at low power (vs PIC32MM0128GPM036-E/M2)
- Pin-compatible Flash upgrade path within same family (vs PIC32MM0256GPM036T-I/M2)
- Pin-compatible lower-cost sibling (vs PIC32MM0064GPM036T-I/M2)
Notes de conception
The PIC32MM0128GPM036T-I/M2 has separate analog and digital supply pins (VDD/VSS) that should be decoupled with 100 nF and 4.7 uF capacitors placed as close as possible to each supply pin. For USB bus-powered designs, the VUSB pin requires a 1 uF decoupling capacitor to ground. Use a star-ground topology with the exposed thermal pad tied to ground for optimal thermal dissipation and EMI performance.
Route USB D+ and D- traces as a 90-ohm differential pair with matched length within 300 mil, and place the 27 pF series capacitor near the connector on the MCU side per USB 2.0 spec. Keep crystal traces (OSC1/OSC2) short and surrounded by ground pour to avoid coupling noise into the system clock. Place the SQFN exposed pad on the bottom copper plane with multiple thermal vias for heat spreading.
Estimated: at maximum sustained CPU activity (48 MHz, full peripheral clock) the SQFN-36 junction temperature rise above ambient is approximately 8-12C/W depending on copper area; with 1 square inch of ground plane on the exposed pad, theta_JA is around 38 C/W. For continuous heavy compute, attach the exposed pad to a copper pour with at least 4-6 thermal vias to limit junction temperature below 100C in industrial environments.
Do not exceed 3.6 V on any I/O or supply pin - the PIC32MM is not 5 V tolerant. Verify the USB VBUS voltage does not exceed 3.6 V before connecting to VUSB; many bus-powered designs require external protection. The CONFIG words must be programmed correctly to enable the USB clock source or USB enumeration will fail. Enable the JTAG lock bits for production to protect firmware IP.
Informations de conformité
RoHS compliant per Microchip product page. Not AEC-Q100 qualified; choose VAO suffix variant or other family members for automotive.
