PIC32MX664F128HT-I/PT - 32-bit MCU 80MHz 128KB Flash USB+ETH | Microchip
Référence : PIC32MX664F128HT-I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $6.78 | $6,78 |
| 10 | $6.05 | $60,50 |
| 100 | $5.38 | $538,00 |
| 500 | $4.82 | $2 410,00 |
| 1 000 | $4.36 | $4 360,00 |
PIC32MX664F128HT-I/PT Présentation
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program Flash, non-volatile data storage, RAM, and peripherals such as ADC, timers, and communication interfaces into one package. The PIC32MX6 family is Microchip's mid-range 32-bit MCU line, sitting between the PIC32MX1/2 entry-level parts and the PIC32MZ high-performance series, optimized for embedded connectivity applications.
Key features of the PIC32MX664F128HT-I/PT include 128 KB (128K x 8) Flash with self-programmable Flash, 32 KB SRAM, integrated full-speed USB 2.0 device/host/OTG, integrated 10/100 Mbit Ethernet MAC, 53 usable I/O lines, a 16-channel 16-bit ADC at 500 ksps, two I2C, two SPI, two UART, four 16-bit timers, a real-time clock, and 4-channel DMA. The device supports industrial temperature range of -40C to +85C.
Architecturally, the PIC32MX664F128HT-I/PT uses the MIPS32 M4K core with 5-stage pipeline, MMU-less flat memory map, and hardware multiply/divide. The peripheral set is interconnected via a peripheral bus matrix allowing simultaneous DMA and CPU access for high-throughput applications.
Typical applications include industrial Ethernet nodes, USB-based data loggers, embedded web servers, home automation gateways, and POS terminals. The combination of USB, Ethernet, and 16-bit ADC makes it a strong fit for connected sensing and protocol conversion designs.
When designing, allocate adequate decoupling near VDD/AVDD pins, follow Microchip's TQFP-64 land pattern, and use the MPLAB Harmony framework for peripheral drivers and TCP/IP stack.
Alternatives de remplacement direct pour PIC32MX664F128HT-I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MX664F128HT-I/PT (même facteur de forme et même empreinte) — différant par ADC, Package, Timers, MSL Level, Operating Temperature.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MX664F128H-I/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC32MX664F128L-I/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC32MX564F128HT-I/MR
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$4.73 / unité
Voir la fiche technique →PIC32MX675F512HT-80I/PT
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$8.27 / unité
Voir la fiche technique →PIC32MX795F512L-80I/PT
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$7.55 / unité
Voir la fiche technique →PIC32MX470F512HT-120/PT
✅ Remplacement direct✓ En stock
$5.55 / unité
Voir la fiche technique →PIC32MX664F128HT-I/PT Valeurs maximales et caractéristiques électriques
| Core Architecture | MIPS32 M4K (32-bit RISC) |
| Maximum CPU Speed | 80 MHz |
| Performance | 1.56 DMIPS/MHz |
| Program Flash | 128 KB (128K x 8) |
| SRAM | 32 KB |
| Number of I/O Pins | 53 |
| Température de fonctionnement | -40C to +85C (Industrial) |
| Boîtier | 64-pin TQFP (PT), 10x10x1 mm |
| Type de montage | Surface Mount |
| ADC | 16-channel, 10-bit (at 80 MHz) |
| USB | USB 2.0 Full-Speed Device/Host/OTG |
| Ethernet | Integrated 10/100 Mbit MAC |
| DMA Channels | 4 |
| UART / SPI / I2C | 2 / 2 / 2 |
| Timers | 4 x 16-bit |
| Statut RoHS | Compliant |
Configuration des broches de PIC32MX664F128HT-I/PT
| Broche 1 | MCLR — Master Clear / Reset input |
| Broche 2 | PGED1/AN0/CN2/RPB0 — Programming data / analog input / I/O port B0 |
| Broche 3 | PGEC1/AN1/CN3/RPB1 — Programming clock / analog input / I/O port B1 |
| Broche 4 | AN2/CN4/RPB2 — Analog input / I/O port B2 |
| Broche 5 | AN3/CN5/RPB3 — Analog input / I/O port B3 |
| Broche 6 | AN4/CN6/RPB4 — Analog input / I/O port B4 |
| Broche 7 | AN5/CN7/RPB5 — Analog input / I/O port B5 |
| Broche 8 | VDD — Core logic supply voltage |
| Broche 9 | VSS — Ground core logic |
| Broche 10 | PGED2/RPB6 — Programming data alternate / I/O port B6 |
| Broche 11 | PGEC2/RPB7 — Programming clock alternate / I/O port B7 |
| Broche 12 | AN6/RPB8 — Analog input / I/O port B8 |
| Broche 13 | AN7/RPB9 — Analog input / I/O port B9 |
| Broche 14 | TMS/AN8/RPB10 — JTAG TMS / analog input / I/O port B10 |
| Broche 15 | TCK/AN9/RPB11 — JTAG TCK / analog input / I/O port B11 |
| Broche 16 | TDO/AN11/RPB12 — JTAG TDO / analog input / I/O port B12 |
| Broche 17 | TDI/AN10/RPB13 — JTAG TDI / analog input / I/O port B13 |
| Broche 18 | VBUS — USB bus voltage sense |
| Broche 19 | VUSB3V3 — USB internal 3.3V regulator output |
| Broche 20 | D+ — USB data plus |
| Broche 21 | D- — USB data minus |
| Broche 22 | RPC0 — I/O port C0 |
| Broche 23 | RPC1 — I/O port C1 |
| Broche 24 | RPC2 — I/O port C2 |
| Broche 25 | RPC3 — I/O port C3 |
| Broche 26 | VDD — Core logic supply voltage |
| Broche 27 | VSS — Ground core logic |
| Broche 28 | RPC4 — I/O port C4 |
| Broche 29 | RPC5 — I/O port C5 |
| Broche 30 | RPC6 — I/O port C6 |
| Broche 31 | RPC7 — I/O port C7 |
| Broche 32 | RPC8 — I/O port C8 |
| Broche 33 | RPC9 — I/O port C9 |
| Broche 34 | CVREF-/AN12/RPC10 — Comparator reference / analog / I/O port C10 |
| Broche 35 | CVREF+/AN13/RPC11 — Comparator reference / analog / I/O port C11 |
| Broche 36 | RPD0/OC1 — I/O port D0 / output compare 1 |
| Broche 37 | RPD1/OC2 — I/O port D1 / output compare 2 |
| Broche 38 | RPD2/OC3 — I/O port D2 / output compare 3 |
| Broche 39 | RPD3/OC4 — I/O port D3 / output compare 4 |
| Broche 40 | RPD4/OC5 — I/O port D4 / output compare 5 |
| Broche 41 | RPD5 — I/O port D5 |
| Broche 42 | RPD6 — I/O port D6 |
| Broche 43 | RPD7 — I/O port D7 |
| Broche 44 | RPD8 — I/O port D8 |
| Broche 45 | RPD9 — I/O port D9 |
| Broche 46 | RPD10 — I/O port D10 |
| Broche 47 | RPD11 — I/O port D11 |
| Broche 48 | RPD12 — I/O port D12 |
| Broche 49 | RPD13 — I/O port D13 |
| Broche 50 | RPD14 — I/O port D14 |
| Broche 51 | RPD15 — I/O port D15 |
| Broche 52 | RPE0 — I/O port E0 |
| Broche 53 | RPE1 — I/O port E1 |
| Broche 54 | RPE2 — I/O port E2 |
| Broche 55 | RPE3 — I/O port E3 |
| Broche 56 | RPE4 — I/O port E4 |
| Broche 57 | RPE5 — I/O port E5 |
| Broche 58 | RPE6 — I/O port E6 |
| Broche 59 | RPE7 — I/O port E7 |
| Broche 60 | RPE8 — I/O port E8 |
| Broche 61 | RPE9 — I/O port E9 |
| Broche 62 | RPE10 — I/O port E10 |
| Broche 63 | RPE11 — I/O port E11 |
| Broche 64 | RPE12 — I/O port E12 |
Applications typiques
PIC32MX664F128HT-I/PT convient pour 6 applications: Industrial Ethernet Gateway, USB Data Logger, Embedded Web Server / IoT Node, POS Terminal / Barcode Scanner, Home Automation Gateway, Industrial Sensor / Protocol Converter.
Industrial Ethernet Gateway
The PIC32MX664F128HT-I/PT is well-suited for industrial Ethernet gateways because it combines an 80 MHz MIPS32 M4K core with an integrated 10/100 Mbit Ethernet MAC, 4-channel DMA, and 32 KB SRAM sufficient for an embedded TCP/IP stack. The 16-bit ADC and 53 I/O pins handle analog sensor reading and digital I/O for industrial sensors, while the -40C to +85C industrial temperature range supports factory-floor deployment. Paired with a Microchip KSZ8041 PHY, designers can build Modbus TCP, EtherNet/IP, or PROFINET nodes.
Recommandé
USB Data Logger
For USB data loggers, the PIC32MX664F128HT-I/PT's USB 2.0 Full-Speed device/host/OTG controller allows direct PC connection without an external bridge IC, while 128 KB Flash accommodates logging firmware and a 32 KB buffer for sensor records. The 16-channel 10-bit ADC samples sensor data at up to 500 ksps, and the DMA controller offloads ADC-to-RAM transfers to keep the CPU free for USB stack operations. The TQFP-64 footprint supports compact PCB designs for handheld data loggers.
Recommandé
Embedded Web Server / IoT Node
The PIC32MX664F128HT-I/PT supports embedded web server applications by running Microchip's MPLAB Harmony TCP/IP stack with HTTP server capability on the 80 MHz MIPS32 core. The integrated Ethernet MAC and 53 I/O pins let the device serve HTML/JSON to remote clients while reading sensors via I2C/SPI. With 128 KB Flash the stack, application logic, and a small web page can co-exist; with -40C to +85C operation the device is suited for outdoor IoT nodes.
Recommandé
POS Terminal / Barcode Scanner
In POS terminals and barcode scanners, the PIC32MX664F128HT-I/PT provides the USB host controller for connecting USB-HID barcode scanners and printers, plus the Ethernet MAC for connecting to backend systems. The 80 MHz core and 4 DMA channels handle real-time barcode decoding (via firmware DSP) without breaking USB throughput. The 32 KB RAM is sufficient for transaction buffers, and the TQFP-64 package fits in slim terminal enclosures.
Recommandé
Home Automation Gateway
For home automation gateways, the PIC32MX664F128HT-I/PT combines Ethernet (for WAN/LAN uplink) and USB (for ZigBee/Z-Wave dongles) in a single chip, eliminating dual-MCU designs. The 2x UART interfaces support RS-485 or RS-232 wired sensor networks, while 4 timers and 4 DMA channels handle real-time protocol stacks. With 128 KB Flash the device can run a small embedded HTTP server plus a custom automation scheduler.
Recommandé
Industrial Sensor / Protocol Converter
The PIC32MX664F128HT-I/PT is ideal for protocol conversion modules (e.g. Modbus RTU to Modbus TCP, RS-485 to Ethernet) because the dual UART and Ethernet MAC are both integrated. The 80 MHz MIPS32 core sustains conversion latency below 1 ms with DMA-assisted buffer handling, while 32 KB SRAM holds incoming/outgoing packet buffers. The 16-bit ADC allows local analog sensing, and the TQFP-64 industrial-grade package supports -40C to +85C DIN-rail mounted enclosures.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MX664F128HT-I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MX664F128H-I/PT | PIC32MX564F128HT-I/MR | PIC32MX675F512HT-80I/PT | PIC32MX795F512L-80I/PT |
|---|---|---|---|---|---|
| Package | 64-pin TQFP (PT) | 64-pin TQFP (PT) - same | 64-pin TQFP (PT) - same | 64-pin TQFP (PT) - same | 64-pin TQFP (PT) - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Core / Speed | MIPS32 M4K / 80 MHz | MIPS32 M4K / 80 MHz | MIPS32 M4K / 80 MHz | MIPS32 M4K / 80 MHz | MIPS32 M4K / 80 MHz |
| Flash | 128 KB | 128 KB | 128 KB | 512 KB | 512 KB |
| RAM | 32 KB | 32 KB | 32 KB | 64 KB | 128 KB |
| USB 2.0 FS | Yes (Device/Host/OTG) | Yes (Device/Host/OTG) | Yes | Yes (Device/Host/OTG) | Yes (Device/Host/OTG) |
| 10/100 Ethernet MAC | Yes | Yes | No (USB only) | Yes | Yes + CAN |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| Pkg Format | Tape-and-Reel | Tray | Tape-and-Reel | Tape-and-Reel | Tape-and-Reel |
Principaux différenciateurs
- Integrated 10/100 Ethernet MAC + USB 2.0 FS controller (vs PIC32MX564F128HT-I/MR)
- Drop-in tray-packaged twin available (vs PIC32MX664F128H-I/PT)
- Higher Flash option in same package (vs PIC32MX675F512HT-80I/PT)
- PIC32MX6 series with full USB+ETH integration (vs PIC32MX575F512H-80I/PT)
Notes de conception
Place a 0.1 uF decoupling capacitor as close as possible to each VDD pin (pins 8, 26) and a bulk 10 uF tantalum or aluminum electrolytic capacitor on the board-level VDD rail. The PIC32MX664F128HT-I/PT datasheet recommends VDD/VSS pairs to be bypassed at every pin pair to reduce switching noise that can affect the 10-bit ADC readings and the Ethernet MAC PHY interface.
Follow the TQFP-64 land pattern from Microchip's package specification (10x10 mm body, 0.5 mm pitch, 7.5x7.5 mm exposed pad not present - thermal pad not required). Route the USB D+/D- traces as a 90-ohm differential pair with matched length (within 150 mil) to the USB connector. Keep the 50 MHz RMII clock trace to the Ethernet PHY under 50 mm and well-spaced from switching signals.
Do not forget to enable the internal USB 3.3V regulator by leaving the VUSB3V3 pin floating (not grounded) and connecting a 0.1 uF decoupling capacitor. The Ethernet MAC requires an external PHY; the PIC32MX664F128HT-I/PT alone cannot drive an RJ45 jack. For RMII mode, ensure the 50 MHz reference clock is sourced from the PHY (not the MCU) to avoid timing skew.
When using the Ethernet MAC in MII mode (4-bit data bus at 25 MHz), the MCU outputs run at 25 MHz on EMDC/EMDIO/ETXD/ERXD - keep these within 25 mm and avoid running them parallel to the USB differential pair. For RMII mode the bus runs at 50 MHz - shorter traces and ground reference are essential. The MCLR pin should have a 10 kohm pull-up to VDD; do not leave it floating during operation.
Informations de conformité
RoHS and REACH compliance per Microchip product page. Not AEC-Q100 qualified - choose PIC32MX variants with -V suffix for automotive-grade qualification. Lead-free per JEDEC J-STD-020 reflow profile.
