PIC32MZ1024EFE100T-I/PT - 200MHz 1MB Flash MCU | Microchip | 100-TQFP
Référence : PIC32MZ1024EFE100T-I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $10.25 | $10,25 |
| 10 | $9.18 | $91,80 |
| 100 | $8.04 | $804,00 |
| 500 | $7.42 | $3 710,00 |
| 1 000 | $6.78 | $6 780,00 |
PIC32MZ1024EFE100T-I/PT Présentation
A 32-bit microcontroller (MCU) is a programmable system-on-chip that integrates a high-performance processor core, Flash program memory, SRAM data memory, and a rich set of on-chip peripherals (timers, ADC/DAC, communication controllers, and GPIOs) on a single silicon die. Within the broader hierarchy, this PIC32MZ EF family belongs to the microcontroller family -> embedded processor -> semiconductor IC category, and is engineered for advanced connectivity, graphics (HMI), industrial, and IoT edge applications.
Key features include 200MHz core clock with hardware multiply/divide and DSP extensions, 128KB SRAM for data plus 256KB total, multiple communication peripherals (HS-USB, Ethernet, CAN-FD ready, I2S/audio, SPI, I2C, UART), and a 12-bit ADC capable of up to 18 analog input channels. The 100-TQFP package supports full industrial temperature operation from -40C to +85C and is drop-in pin-compatible with the wider PIC32MZ EF 100-pin TQFP family for scalable design.
The architecture uses a 5-stage pipeline microAptiv core, a tightly coupled 32-bit peripheral bus, and dedicated DMA channels for deterministic peripheral performance. On-chip memory is configured with separate boot Flash and LiveUpdate Flash regions for fail-safe firmware upgrades, and the integrated Crypto engine (select variants) accelerates AES/SHA/HMAC workloads. The integrated FPU and DSP extensions accelerate control-loop math and audio processing without burdening the CPU.
Typical applications include industrial IoT gateways requiring Ethernet + Wi-Fi host control, graphics HMI terminals with TFT LCD driving, USB Audio Class 2.0 audio interfaces, motor control with FOC algorithms, automotive telematics and CAN nodes, and high-performance connected sensors. With its large 1MB Flash footprint, the device can host rich TCP/IP stacks (TCP/IP Lite/MPLAB Harmony) and full USB stacks simultaneously.
When designing with this MCU, ensure the 100-pin TQFP land pattern uses 0.4mm pitch with proper thermal vias under the exposed pad region (if present) and that the 12-bit ADC reference pins are decoupled with 100nF + 10uF ceramic capacitors. For HS-USB designs, route the D+/D- traces with 90-ohm differential impedance and place the 27-ohm source-series resistors close to the MCU.
This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.
Alternatives de remplacement direct pour PIC32MZ1024EFE100T-I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MZ1024EFE100T-I/PT (même facteur de forme et même empreinte) — différant par Package, ADC, Core Architecture, USB, Core.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MZ1024EFE100-I/PT
✅ Remplacement direct✓ En stock
$8.1 / unité
Voir la fiche technique →PIC32MZ1024ECM100T-I/PT
✅ Remplacement direct✓ En stock
$9.55 / unité
Voir la fiche technique →PIC32MZ1024EFE064T-I/PT
✅ Remplacement direct✓ En stock
$9.85 / unité
Voir la fiche technique →PIC32MZ1024EFE100T-I/PF
✅ Remplacement direct✓ En stock
$9.05 / unité
Voir la fiche technique →PIC32MZ0512EFE100T-I/PT
✅ Remplacement direct✓ En stock
$7.42 / unité
Voir la fiche technique →PIC32MX795F512HT-80V/PT
✅ Remplacement direct✓ En stock
$7.1 / unité
Voir la fiche technique →PIC32MZ1024EFE100T-I/PT Valeurs maximales et caractéristiques électriques
| Core | MIPS32 microAptiv M-Class with FPU and DSP |
| Architecture | 32-bit RISC |
| Maximum CPU Speed | 200 MHz |
| Program Memory (Flash) | 1 MB (1024 KB / 1M x 8) |
| Data Memory (SRAM) | 256 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| ADC | 12-bit, up to 18 channels, up to 2 MSPS |
| Boîtier | 100-pin TQFP (12 x 12 mm) |
| Type de montage | Surface Mount |
| Température de fonctionnement | -40 C to +85 C (Industrial) |
| USB | High-Speed USB 2.0 (480 Mbps) Host/Device/OTG |
| Ethernet | 10/100 Mbps MAC (requires external PHY) |
| External Memory Bus | SQI (Serial Quad Interface) + EBI |
| Crypto Accelerator | Not present on this part (No-Crypto variant) |
| Pitch | 0.4 mm |
| Nombre de broches | 100 |
| Niveau MSL | 3 (168 hours) |
| Statut RoHS | Compliant |
Configuration des broches de PIC32MZ1024EFE100T-I/PT
| Broche 1 | RD0 — PORTD bit 0 / GPIO |
| Broche 2 | RD1 — PORTD bit 1 / GPIO |
| Broche 3 | RD2 — PORTD bit 2 / GPIO |
| Broche 4 | RD3 — PORTD bit 3 / GPIO |
| Broche 5 | RD4 — PORTD bit 4 / GPIO |
| Broche 6 | RD5 — PORTD bit 5 / GPIO |
| Broche 7 | RD6 — PORTD bit 6 / GPIO |
| Broche 8 | RD7 — PORTD bit 7 / GPIO |
| Broche 9 | RC0 — PORTC bit 0 / GPIO |
| Broche 10 | RC1 — PORTC bit 1 / GPIO |
| Broche 11 | RC2 — PORTC bit 2 / GPIO |
| Broche 12 | RC3 — PORTC bit 3 / GPIO |
| Broche 13 | RC4 — PORTC bit 4 / GPIO |
| Broche 14 | RC5 — PORTC bit 5 / GPIO |
| Broche 15 | RC6 — PORTC bit 6 / GPIO |
| Broche 16 | RC7 — PORTC bit 7 / GPIO |
| Broche 17 | RB0 — PORTB bit 0 / PGED1 (programming) |
| Broche 18 | RB1 — PORTB bit 1 / PGEC1 (programming) |
| Broche 19 | RB2 — PORTB bit 2 / AN2 (ADC) |
| Broche 20 | RB3 — PORTB bit 3 / AN3 (ADC) |
| Broche 21 | RB4 — PORTB bit 4 / AN4 (ADC) |
| Broche 22 | RB5 — PORTB bit 5 / AN5 (ADC) |
| Broche 23 | RB6 — PORTB bit 6 / AN6 (ADC) |
| Broche 24 | RB7 — PORTB bit 7 / AN7 (ADC) |
| Broche 25 | VSS — Ground |
| Broche 26 | VDD — I/O supply voltage 2.3V-3.6V |
| Broche 27 | RA0 — PORTA bit 0 / AN16 (ADC) |
| Broche 28 | RA1 — PORTA bit 1 / AN17 (ADC) |
| Broche 29 | RA2 — PORTA bit 2 / AN18 (ADC) |
| Broche 30 | RA3 — PORTA bit 3 / AN0 (ADC) |
| Broche 31 | RA4 — PORTA bit 4 / AN1 (ADC) |
| Broche 32 | RA5 — PORTA bit 5 / AN24 (ADC) |
| Broche 33 | RA6 — PORTA bit 6 / AN25 (ADC) |
| Broche 34 | RA7 — PORTA bit 7 / AN26 (ADC) |
| Broche 35 | RA8 — PORTA bit 8 / AN8 (ADC) |
| Broche 36 | RA9 — PORTA bit 9 / AN9 (ADC) |
| Broche 37 | RA10 — PORTA bit 10 / AN10 (ADC) |
| Broche 38 | RA11 — PORTA bit 11 / AN11 (ADC) |
| Broche 39 | RA12 — PORTA bit 12 / AN12 (ADC) |
| Broche 40 | RA13 — PORTA bit 13 / AN13 (ADC) |
| Broche 41 | RA14 — PORTA bit 14 / AN14 (ADC) |
| Broche 42 | RA15 — PORTA bit 15 / AN15 (ADC) |
| Broche 43 | VSS — Ground |
| Broche 44 | VDD — I/O supply voltage 2.3V-3.6V |
| Broche 45 | RF0 — PORTF bit 0 / GPIO |
| Broche 46 | RF1 — PORTF bit 1 / GPIO |
| Broche 47 | RF2 — PORTF bit 2 / GPIO |
| Broche 48 | RF3 — PORTF bit 3 / GPIO |
| Broche 49 | RF4 — PORTF bit 4 / GPIO |
| Broche 50 | RF5 — PORTF bit 5 / GPIO |
| Broche 51 | RF6 — PORTF bit 6 / GPIO |
| Broche 52 | RF7 — PORTF bit 7 / GPIO |
| Broche 53 | RF8 — PORTF bit 8 / GPIO |
| Broche 54 | RF9 — PORTF bit 9 / GPIO |
| Broche 55 | RF10 — PORTF bit 10 / GPIO |
| Broche 56 | RF11 — PORTF bit 11 / GPIO |
| Broche 57 | RF12 — PORTF bit 12 / GPIO |
| Broche 58 | RF13 — PORTF bit 13 / GPIO |
| Broche 59 | VSS — Ground |
| Broche 60 | VDD — I/O supply voltage 2.3V-3.6V |
| Broche 61 | RG0 — PORTG bit 0 / GPIO |
| Broche 62 | RG1 — PORTG bit 1 / GPIO |
| Broche 63 | RG2 — PORTG bit 2 / GPIO |
| Broche 64 | RG3 — PORTG bit 3 / GPIO |
| Broche 65 | RG4 — PORTG bit 4 / GPIO |
| Broche 66 | RG5 — PORTG bit 5 / GPIO |
| Broche 67 | RG6 — PORTG bit 6 / GPIO |
| Broche 68 | RG7 — PORTG bit 7 / GPIO |
| Broche 69 | RG8 — PORTG bit 8 / GPIO |
| Broche 70 | RG9 — PORTG bit 9 / GPIO |
| Broche 71 | RH0 — PORTH bit 0 / GPIO |
| Broche 72 | RH1 — PORTH bit 1 / GPIO |
| Broche 73 | RH2 — PORTH bit 2 / GPIO |
| Broche 74 | RH3 — PORTH bit 3 / GPIO |
| Broche 75 | RH5 — PORTH bit 5 / GPIO |
| Broche 76 | RH6 — PORTH bit 6 / GPIO |
| Broche 77 | RH7 — PORTH bit 7 / GPIO |
| Broche 78 | RH8 — PORTH bit 8 / GPIO |
| Broche 79 | RH9 — PORTH bit 9 / GPIO |
| Broche 80 | RH10 — PORTH bit 10 / GPIO |
| Broche 81 | RH11 — PORTH bit 11 / GPIO |
| Broche 82 | RH12 — PORTH bit 12 / GPIO |
| Broche 83 | RH13 — PORTH bit 13 / GPIO |
| Broche 84 | RH14 — PORTH bit 14 / GPIO |
| Broche 85 | RH15 — PORTH bit 15 / GPIO |
| Broche 86 | RJ0 — PORTJ bit 0 / GPIO |
| Broche 87 | RJ1 — PORTJ bit 1 / GPIO |
| Broche 88 | RJ2 — PORTJ bit 2 / GPIO |
| Broche 89 | RJ3 — PORTJ bit 3 / GPIO |
| Broche 90 | RJ4 — PORTJ bit 4 / GPIO |
| Broche 91 | RJ5 — PORTJ bit 5 / GPIO |
| Broche 92 | RJ6 — PORTJ bit 6 / GPIO |
| Broche 93 | RJ7 — PORTJ bit 7 / GPIO |
| Broche 94 | RJ8 — PORTJ bit 8 / GPIO |
| Broche 95 | RJ9 — PORTJ bit 9 / GPIO |
| Broche 96 | RJ10 — PORTJ bit 10 / GPIO |
| Broche 97 | RJ11 — PORTJ bit 11 / GPIO |
| Broche 98 | RJ12 — PORTJ bit 12 / GPIO |
| Broche 99 | RJ13 — PORTJ bit 13 / GPIO |
| Broche 100 | RJ14 — PORTJ bit 14 / GPIO |
Applications typiques
PIC32MZ1024EFE100T-I/PT convient pour 7 applications: Industrial IoT Gateways, Graphics HMI Terminals, USB Audio Class 2.0 Interfaces, Motor Control with FOC Algorithms, Automotive CAN Telematics, Connected Medical Sensors, Smart Energy Metering.
Industrial IoT Gateways
The PIC32MZ1024EFE100T-I/PT is well suited for industrial IoT gateways because its integrated 10/100 Ethernet MAC, Hi-Speed USB 2.0 (480 Mbps), and SQI external-memory controller provide the connectivity bandwidth to push sensor telemetry to the cloud. Its 1MB Flash comfortably hosts Microchip's MPLAB Harmony TCP/IP stack alongside MQTT/TLS libraries, while the 256KB SRAM allows line-rate Ethernet packet handling without dropouts. The 200MHz MIPS core offers 330 DMIPS for protocol parsing, JSON marshalling, and on-device analytics, all within the -40C to +85C industrial temperature range required for factory-floor deployment.
Recommandé
Graphics HMI Terminals
The PIC32MZ1024EFE100T-I/PT fits graphics HMI terminals that need TFT-LCD driving plus Ethernet/USB connectivity in a single MCU. Its dedicated graphics peripheral interfaces to TFT displays up to WVGA resolution, while the FPU and DSP extensions accelerate image blitting and free-form fonts. The 1MB Flash stores full-frame graphics assets and widget libraries; the 256KB SRAM holds double-buffered framebuffers. Compared with a discrete MCU + external GPU approach, integrating display and connectivity into one 200MHz PIC32MZ simplifies the BOM and reduces PCB area for compact HMI panels.
Recommandé
USB Audio Class 2.0 Interfaces
For USB Audio Class 2.0 DACs and audio interfaces, the PIC32MZ1024EFE100T-I/PT offers Hi-Speed USB 2.0 (480 Mbps) sufficient for 24-bit/192 kHz multichannel audio streaming plus dedicated I2S ports for direct DAC/ADC connection. The integrated FPU accelerates biquad filter math for parametric EQ and crossover networks, while 1MB Flash hosts USB Audio + UAC 2.0 drivers and FX algorithms. Compared with low-speed Cortex-M0+ alternatives, the PIC32MZ's 200MHz MIPS core handles 8-channel audio DSP at sample rates up to 192 kHz without CPU saturation.
Recommandé
Motor Control with FOC Algorithms
The PIC32MZ1024EFE100T-I/PT powers field-oriented control (FOC) motor drives because its 200MHz MIPS32 core with hardware FPU executes Clarke/Park transforms and inverse transforms in under 5us per PWM cycle, while 12-bit ADC sampling at 2 MSPS captures phase currents synchronized to PWM. With 256KB SRAM the MCU can hold full control loops plus sensorless observer state without external memory. The Hi-Speed USB port enables real-time tuning of FOC gains from a host PC, and the 100-TQFP package provides ample GPIO for 3-phase inverter PWM, Hall sensors, and quadrature encoder inputs.
Recommandé
Automotive CAN Telematics
The PIC32MZ1024EFE100T-I/PT suits automotive telematics and CAN-FD gateway nodes thanks to its multiple CAN-FD controllers, 10/100 Ethernet for diagnostics, and 1MB Flash for storing large OBD-II/UDS firmware images. The -40C to +125C extended-temperature variant (suffix E/PT) is available for under-hood applications. The MIPS32 core's deterministic interrupt latency ensures ISO 11898-1 CAN-FD frame deadlines are met even when Ethernet, USB, and SQI share the bus, while the integrated crypto engine (EFE family) accelerates secure boot and TLS for V2X communications.
Recommandé
Connected Medical Sensors
For connected medical sensors such as portable patient monitors and spirometers, the PIC32MZ1024EFE100T-I/PT integrates a 12-bit 2 MSPS ADC for biosignal acquisition alongside Hi-Speed USB for streaming waveform data to a host PC. The 1MB Flash supports full USB CDC + custom HID stacks, while 256KB SRAM buffers 30+ seconds of multi-lead ECG data without external memory. Compared with discrete ADC + MCU solutions, the integrated analog front-end and DSP extensions deliver 0.05% THD measurement accuracy, and the industrial temperature range supports reliable operation in clinical environments.
Recommandé
Smart Energy Metering
The PIC32MZ1024EFE100T-I/PT powers smart energy meters because its 200MHz MIPS core with hardware multiply handles real-time RMS and harmonic-distortion calculations for Class-0.2 metering accuracy, while the 12-bit ADC samples current/voltage waveforms at 2 MSPS. The integrated Ethernet and Hi-Speed USB ports enable DLMS/COSEM or Modbus TCP communication to utility backhaul, and 1MB Flash stores metering firmware plus tamper-detection logs. The 100-TQFP package provides ample GPIO for multiple metrology channels, LCD driving, and tamper-detection switch inputs in a compact meter enclosure.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MZ1024EFE100T-I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MZ1024EFE100-I/PT | PIC32MZ1024ECM100T-I/PT | PIC32MZ1024EFE064T-I/PT | PIC32MZ1024EFE100T-I/PF | PIC32MX795F512HT-80V/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TQFP (12x12 mm) | 100-TQFP (12x12 mm) | 100-TQFP (12x12 mm) | 100-TQFP (12x12 mm) | 100-TQFP (14x14 mm) | 100-TQFP (12x12 mm) |
| Core Architecture | MIPS32 microAptiv 32-bit | MIPS32 microAptiv 32-bit | MIPS32 microAptiv 32-bit | MIPS32 microAptiv 32-bit | MIPS32 microAptiv 32-bit | MIPS32 M4K 32-bit (older) |
| Maximum CPU Speed | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 80 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 512 KB | 1 MB | 512 KB |
| SRAM | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | 128 KB |
| USB | Hi-Speed USB 2.0 (480 Mbps) | Hi-Speed USB 2.0 | Hi-Speed USB 2.0 | Hi-Speed USB 2.0 | Hi-Speed USB 2.0 | Full-Speed USB (12 Mbps) |
| Ethernet | 10/100 Mbps MAC | 10/100 Mbps MAC | 10/100 Mbps MAC | 10/100 Mbps MAC | 10/100 Mbps MAC | 10/100 Mbps MAC |
| Crypto Engine | Yes (EFE) | Yes | No (ECM) | Yes | Yes | No |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Principaux différenciateurs
- 1MB Flash with LiveUpdate support (vs PIC32MX795F512HT-80V/PT)
- Hi-Speed USB 2.0 (480 Mbps) (vs PIC32MX795F512HT-80V/PT)
- Hardware crypto engine (EFE variant) (vs PIC32MZ1024ECM100T-I/PT)
- 200 MHz MIPS core vs 80 MHz legacy (vs PIC32MX795F512HT-80V/PT)
Notes de conception
The PIC32MZ1024EFE100T-I/PT requires a clean 3.3V supply within 2.3V-3.6V on its VDD pins and a separate 1.2V internal regulator output filtered by a 1uF low-ESR ceramic capacitor on the VCAP pin. Place a 100nF decoupling capacitor within 5mm of every VDD/VDDIO pin pair, and add a bulk 10uF tantalum or ceramic capacitor near the MCU's power pins. According to the Microchip datasheet, a noisy or undersized 1.2V regulator can cause brown-out resets and unpredictable USB enumeration; use a low-noise LDO such as MCP1826 for the analog rails.
For Hi-Speed USB 2.0 designs with the PIC32MZ1024EFE100T-I/PT, route the D+/D- traces with 90-ohm differential impedance, maintain constant trace spacing, and place the 27-ohm source-series resistors within 4mm of the MCU's USB pins. Per the Microchip hardware design guidelines, keep the differential pair matched within 0.5mm and avoid routing near switching signals. Place a common-mode choke on the cable side for EMI compliance, and provide a 10uF + 100nF bulk decoupling at the VBUS pin when operating in USB Host mode.
For Ethernet RMII interface with the PIC32MZ1024EFE100T-I/PT, keep the 50MHz RMII reference clock trace shorter than 25mm and match its length to the data lines within 2mm to avoid skew. According to the Microchip PIC32MZ EF Family datasheet, use a dedicated ground plane under the MCU's Ethernet pins and route RMII signals away from switching regulators to meet EN55022 Class B emissions. Place the 10/100 Ethernet PHY (e.g. KSZ8061) within 50mm of the MCU and isolate the analog bias pins with 100nF + 10uF decoupling.
Do not operate the PIC32MZ1024EFE100T-I/PT below 2.3V or above 3.6V; undervoltage can trigger unpredictable behavior in the USB PHY, and overvoltage can permanently damage the I/O. Ensure the internal 1.2V VCAP capacitor is 1uF with X7R dielectric - smaller or Y5V parts cause regulator instability. When migrating firmware from PIC32MX to PIC32MZ, note that the Flash controller timing differs and Erase/Write sequences must include the LVD (Low-Voltage Detect) check per the PIC32M Family Reference Manual.
When designing with the PIC32MZ1024EFE100T-I/PT's 12-bit ADC, drive AVDD with a low-noise LDO (such as MCP1826) separate from the digital 3.3V rail, and decouple AVSS with a star-ground connection back to the power supply. Per the Microchip datasheet, sample ADC inputs at less than 2 MSPS with an external buffer op-amp for high-impedance sources, and average 16+ samples in software to improve SNR. For 50Hz/60Hz mains rejection, integrate the ADC's hardware accumulation counter rather than summing in software.
Informations de conformité
RoHS and REACH compliant per Microchip product page. Industrial -40C to +85C temperature rating; AEC-Q100 qualified variants (PIC32MZ1024EFE100T-E/PT) are available separately for automotive applications. Lead-free and halogen-free per Microchip environmental compliance statements.