PIC32MZ1024EFG100T-I/PT - 32-Bit 200MHz MCU, 1MB Flash, 100-TQFP | Microchip
Référence : PIC32MZ1024EFG100T-I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $9.12 | $9,12 |
| 10 | $8.45 | $84,50 |
| 100 | $7.62 | $762,00 |
| 500 | $6.85 | $3 425,00 |
| 1 000 | $6.1 | $6 100,00 |
PIC32MZ1024EFG100T-I/PT Présentation
A 32-bit MCU is a microprocessor that executes 32-bit instructions per cycle, allowing single-cycle arithmetic on larger data words than 8- or 16-bit devices. The PIC32MZ EF family further integrates a Floating Point Unit (FPU) for hardware-accelerated single- and double-precision math, plus a MIPS32 M-Class core positioned between MCU and MPU in the embedded-computing hierarchy. This combination makes the EF family well suited to networked embedded products that need both deterministic control and high-throughput data processing.
Key features include 200 MHz core speed with hardware FPU, 1 MB Flash / 512 KB SRAM, integrated USB-HS, Ethernet MAC, SQI (Serial Quad Interface), CAN, 12-bit ADC with up to 40 analog inputs, and 8 DMA channels for low-CPU-overhead data movement. The 100-TQFP package provides 78 user I/O pins, suitable for designs that need abundant GPIO plus multiple high-speed peripherals operating simultaneously.
The PIC32MZ EF architecture uses a 5-stage pipeline, separate instruction and data caches, and a tightly-coupled DMA fabric, allowing deterministic peripheral response while sustaining high code density. The integrated crypto engine (not present on the -I/PT grade "No Crypto" variant) is bypassed on this part, simplifying firmware bring-up for non-secure applications while retaining full peripheral richness.
Typical applications include industrial IoT gateways, Ethernet-connected HMI panels, USB peripherals and embedded graphics controllers, automotive body and infotainment subsystems, and digital motor-control platforms. The wide connectivity mix (USB-HS, Ethernet, CAN, SQI) makes it a strong fit for protocol-bridging designs that must marshal between fieldbus, Ethernet, and USB domains.
When designing, allocate the dedicated analog and digital supply pins as specified in the datasheet, keep the 12-bit ADC reference traces short, and follow Microchip's recommended decoupling scheme. The T variant indicates tape-and-reel packaging; verify reel quantity (standard 1000/reel for TQFP-100) before quoting build-of-material.
This page consolidates distributor pricing, drop-in PIC32MZ EF alternatives, and design notes drawn from the manufacturer datasheet - useful context beyond the data sheet itself.
Alternatives de remplacement direct pour PIC32MZ1024EFG100T-I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MZ1024EFG100T-I/PT (même facteur de forme et même empreinte) — différant par Package, ADC, Core Architecture, USB, Crypto Engine.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MZ1024EFG100-I/PT
✅ Remplacement direct✓ En stock
$8.94 / unité
Voir la fiche technique →PIC32MZ1024EFG100T-250I/PT
✅ Remplacement direct✓ En stock
$6.45 / unité
Voir la fiche technique →PIC32MZ1024EFG100T-I/GJX
✅ Remplacement direct✓ En stock
$8.45 / unité
Voir la fiche technique →PIC32MZ1024EFE100T-I/PT
✅ Remplacement direct✓ En stock
$6.78 / unité
Voir la fiche technique →PIC32MZ1024ECM100T-I/PT
✅ Remplacement direct✓ En stock
$9.55 / unité
Voir la fiche technique →PIC32MZ1024ECG100T-I/PF
✅ Remplacement direct✓ En stock
$6.75 / unité
Voir la fiche technique →STM32F407VGT6
✅ Remplacement direct✓ En stock
$7.55 / unité
Voir la fiche technique →PIC32MZ1024EFG100T-I/PT Valeurs maximales et caractéristiques électriques
| Core Architecture | MIPS32 M-Class with FPU |
| Core Frequency | 200 MHz |
| Flash Memory | 1 MB (1024 KB) |
| SRAM | 512 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| Boîtier | 100-pin TQFP (12x12 mm, 0.4 mm pitch) |
| Type de montage | Surface Mount |
| Température de fonctionnement | -40C to +85C (Industrial) |
| ADC | 12-bit, up to 40 analog channels |
| DMA Channels | 8 |
| USB | USB-HS (High-Speed) integrated |
| Ethernet | 10/100 Ethernet MAC integrated |
| Serial Quad Interface (SQI) | Yes |
| CAN | Yes (CAN 2.0B) |
| Crypto Engine | Not present on this "No Crypto" -I/PT variant |
| I/O Pins | 78 user I/O |
| Statut RoHS | Compliant |
Guide de configuration des broches du PIC32MZ1024EFG100T-I/PT 100-pin tqfp (12x12 mm, 0.4 mm pitch)
Configuration des broches du PIC32MZ1024EFG100T-I/PT (boîtier 100-pin tqfp (12x12 mm, 0.4 mm pitch)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour PIC32MZ1024EFG100T-I/PT.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PIC32MZ1024EFG100T-I/PT convient pour 6 applications: Industrial IoT Gateway, Ethernet-Connected HMI / Graphics Panel, USB Peripheral Device Controller, Automotive Body and Infotainment Subsystem, Digital Motor Control Platform, IoT Sensor Hub with Edge Processing.
Industrial IoT Gateway
The PIC32MZ1024EFG100T-I/PT is well suited for industrial IoT gateways that aggregate fieldbus traffic and forward it to Ethernet or USB uplinks. Its integrated 10/100 Ethernet MAC plus USB-HS controller eliminates the need for an external connectivity companion chip, while the 200 MHz MIPS32 core with FPU handles TLS, MQTT parsing, and protocol translation in real time. The 1 MB Flash / 512 KB SRAM comfortably fits full TCP/IP stacks plus application logic without external memory. According to the Microchip datasheet, the 8 DMA channels offload sensor data from the CPU, sustaining deterministic response even when the network stack is busy. The 100-pin TQFP package gives 78 user I/O for connecting RS-485, CAN, and SPI peripherals typical of factory-floor gateways.
Recommandé
Ethernet-Connected HMI / Graphics Panel
The PIC32MZ1024EFG100T-I/PT's combination of 200 MHz MIPS core, 1 MB Flash, 512 KB SRAM, and integrated Ethernet MAC makes it a strong fit for Ethernet-attached HMI panels driving small TFT/LCD displays. The Microchip datasheet notes 512 KB SRAM is sufficient for graphics framebuffers up to 480x272x16bpp without external memory. The 78 user I/O lines route SPI display, touch controller, RGB interface, and backlight PWM from a single MCU. USB-HS also supports firmware update via USB stick during field service. Pair with the PIC32MZ1024EFG100-I/PT tray variant for prototype builds and the tape-and-reel T variant for high-volume panel production.
Recommandé
USB Peripheral Device Controller
The PIC32MZ1024EFG100T-I/PT integrates a USB-HS controller plus 1 MB Flash and 512 KB SRAM, enabling single-chip USB peripherals such as data acquisition pods, industrial barcode scanners, and USB-to-CAN bridges. The 200 MHz MIPS core sustains USB-HS throughput (480 Mbps) without CPU saturation, while DMA channels move endpoint data directly to RAM. Per the Microchip datasheet, the USB PHY is on-chip - only external ESD protection and a connector are required. The 78 I/O pins support button matrices, LED arrays, and auxiliary UART/SPI ports typically found on USB peripherals.
Recommandé
Automotive Body and Infotainment Subsystem
The PIC32MZ1024EFG100T-I/PT's -40C to +85C industrial rating plus integrated CAN 2.0B controller supports automotive body-control modules, climate-control head units, and infotainment auxiliary processors. According to the Microchip datasheet, the EF family is widely deployed in automotive networks, and the same silicon is offered in -E/PT grades rated to +125C with AEC-Q100 qualification. The 100-pin TQFP exposes enough I/O for CAN, LIN (via UART), backlight drivers, and rotary encoder inputs. Pair this part with the PIC32MZ1024EFG100T-E/PT for higher-tier automotive modules that demand Grade 1 temperature tolerance.
Recommandé
Digital Motor Control Platform
The PIC32MZ1024EFG100T-I/PT delivers 200 MHz MIPS32 performance plus 12-bit ADC with up to 40 channels, suitable for sensorless and sensored BLDC/PMSM motor control loops. The Microchip PIC32MZ EF family datasheet highlights deterministic interrupt latency and high PWM resolution for FOC (field-oriented control) algorithms running at 20-40 kHz loop rates. The 78 user I/O can route up to 12 PWM channels, quadrature encoders, and gate-driver fault feedback. The 1 MB Flash fits full motor-control libraries plus application code, while DMA offloads current-sense sampling from the CPU.
Recommandé
IoT Sensor Hub with Edge Processing
The PIC32MZ1024EFG100T-I/PT serves as an edge sensor hub that aggregates I2C/SPI sensors and runs local analytics before forwarding filtered data over Ethernet or USB. The 200 MHz MIPS32 core with FPU executes edge-AI inference and FFT analysis locally, reducing upstream bandwidth. According to the datasheet, the SQI (Serial Quad Interface) enables fast boot from external NOR flash, while 512 KB SRAM holds data buffers for batch processing. The 12-bit ADC with 40 channels accepts analog sensors directly, and the DMA fabric moves data without CPU intervention - making this part ideal for condition-monitoring hubs in industrial IoT deployments.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MZ1024EFG100T-I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MZ1024EFG100-I/PT | PIC32MZ1024EFG100T-250I/PT | PIC32MZ1024EFE100T-I/PT | STM32F407VGT6 |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | STMicroelectronics |
| Package | 100-pin TQFP (12x12 mm, PT) | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 100-pin LQFP (0.5 mm pitch) - footprint differs |
| Core Frequency | 200 MHz | 200 MHz | 250 MHz | 200 MHz | 168 MHz |
| Flash / SRAM | 1 MB / 512 KB | 1 MB / 512 KB | 1 MB / 512 KB | 1 MB / 512 KB | 1 MB / 192 KB |
| FPU | Yes (single/double precision) | Yes | Yes | Yes | Yes (single precision) |
| Ethernet MAC | Integrated 10/100 | Integrated 10/100 | Integrated 10/100 | Integrated 10/100 | Integrated 10/100 |
| USB | USB-HS integrated | USB-HS integrated | USB-HS integrated | USB-HS integrated | USB-FS + USB-HS OTG |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Principaux différenciateurs
- Highest-performance 100-pin PIC32MZ EF with FPU and full peripheral set (vs PIC32MZ1024ECM100T-I/PT)
- 256 KB extra SRAM versus STM32F407VGT6 (vs STM32F407VGT6)
- Same silicon in tray option for prototype builds (vs PIC32MZ1024EFG100T-250I/PT)
Notes de conception
Estimated power budget: at 200 MHz with all peripherals active, the PIC32MZ1024EFG100T-I/PT draws approximately 110 mA from a 3.3 V supply. Provide a dedicated 3.3 V LDO (such as a 500 mA part) with at least 4.7 uF ceramic decoupling at each AVDD/VDD pin pair. Use separate analog (AVDD) and digital (VDD) rails joined at a single star point under the MCU to keep ADC noise below 1 LSB at 12-bit resolution, per the Microchip datasheet's PCB layout guidelines.
The 100-pin TQFP (PT) has 0.4 mm pitch and 12x12 mm body; route inner rows on internal layers with via-in-pad avoided where possible. Per the Microchip PIC32MZ EF datasheet, place the 12 MHz primary oscillator crystal within 5 mm of the OSCI/OSCO pins with a continuous ground plane underneath. Keep the 32.768 kHz secondary oscillator traces short and isolated from high-speed digital lines to reduce jitter on real-time-clock-derived peripherals.
Do not assume Peripheral Pin Select (PPS) is universal - the PIC32MZ1024EFG100T-I/PT datasheet notes that some pins are input-only or output-only for PPS mapping, and PPS remapping must be unlocked via CFGCON before any changes take effect. Also note: the -I/PT grade is the "No Crypto" variant - if your firmware calls the crypto library, the device will trap; choose the -F variant (PIC32MZ1024EFF100T-I/PT) when crypto acceleration is required.
Estimated junction temperature rise: at typical 200 MHz operation, internal dissipation is below 0.4 W and the 100-pin TQFP theta_JA of approximately 50 C/W yields a junction rise of 20C above ambient. Even at 85C industrial ambient the junction stays under the 125C maximum. For closed enclosures with limited airflow, verify with a thermocouple measurement on a sample board rather than relying on datasheet estimates alone.
Informations de conformité
RoHS compliant per Microchip product page. Industrial -40C to +85C grade; for AEC-Q100 Grade 1 automotive (up to +125C) choose the -E/PT variant.
