Microchip Technology

PIC32MZ2048EFH144-E/PL - 32-Bit MCU, 2MB Flash, 144-LQFP | Microchip

Référence : PIC32MZ2048EFH144-E/PL ✓ Actif

En stock Expédié sous 1 à 3 jours ouvrés

2.1 V to 3.6 V Vdss 144-LQFP (PL), 20x20 mm Package 252 MHz (family max); 180 MHz for -E/PL industrial grade as listed by distributors Speed 2 MB (2048 KB) Memory

À partir de $14.95 USD / unité

MOQ : 1 |

Prix mis à jour : 2026-10-09

Tarifs dégressifs

Qté	Prix unitaire	Total
1	$23.92	$23,92
10	$21.53	$215,30
100	$18.74	$1 874,00
500	$16.82	$8 410,00
1 000	$14.95	$14 950,00

ℹ️ Tous les prix sont en USD

Voir la fiche technique (PDF) Voir les alternatives

Quantité

PIC32MZ2048EFH144-E/PL Présentation

The Microchip Technology PIC32MZ2048EFH144-E/PL is a high-performance 32-bit MIPS M-Class microcontroller from the PIC32MZ EF family, integrating up to 2 MB of Flash program memory and 512 KB of SRAM in a 144-pin LQFP (20x20 mm) industrial-grade package. It runs up to 252 MHz (the E/PL industrial grade is screened for 180 MHz operation per the published DigiKey/Mouser listings), delivers a MIPS32 M-Class core with single-cycle MAC and hardware FPU, and provides a rich connectivity peripheral set including HS USB, 10/100 Ethernet MAC, CAN 2.0, SQI, multiple UART/SPI/I2C, 16-bit DMA, and a 48-channel 12-bit ADC.

A 32-bit microcontroller (MCU) is a single-chip processor that executes 32-bit instructions in a single cycle and integrates Flash, SRAM, and peripherals on one die. Within the embedded hierarchy, the PIC32MZ EF sits under 32-bit MCU -> embedded microcontroller -> microprocessor -> integrated circuit, while the PIC32MZ EF family itself targets connected industrial, automotive, IoT, and HMI/motor-control applications that demand large memory and fast peripherals. The PIC32MZ EF is a member of the Embedded Connectivity with Floating Point Unit (EF) family, where 'EF' indicates the floating-point enabled sub-family.

Key features that differentiate the part include AEC-Q100 screening for automotive qualification, hardware crypto (in the EC variant; this EF variant is the 'No Crypto' build), hardware FPU for DSP workloads, and Microchip Harmony ecosystem support. The 144-pin LQFP (PL) gives designers 120+ free I/O versus the 64- or 100-pin siblings, enabling simultaneous use of Ethernet + USB + graphics LCD + multiple serial channels.

Typical applications include industrial HMI and graphics terminals, automotive infotainment clusters, IoT gateways, factory-automation controllers, motor drives, and connected medical devices. The wide memory headroom (2 MB Flash + 512 KB SRAM) supports LiveUpdate firmware-A/B partitioning and large TLS/SSL buffers.

When designing with this device, ensure the 2.1-3.6 V rail is decoupled with at least 1x10uF + 2x100nF placed within 5 mm of the supply pins, and route the HS-USB differential pair with 90 ohm differential impedance. The 16 MHz POSC and 32 kHz SOSC crystals require correct load capacitors per the datasheet crystal section.

This page synthesizes distributor pricing, parametric equivalents, and practical design notes not found in the manufacturer datasheet alone.

Alternatives de remplacement direct pour PIC32MZ2048EFH144-E/PL — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec PIC32MZ2048EFH144-E/PL (même facteur de forme et même empreinte) — différant par Core Architecture, Package, Ethernet, Operating Temperature, ADC.

PIC32MZ2048ECH100-I/PT

Microchip Technology

Core Architecture: MIPS32 microAptiv (M-Class), 32-bit

Package: 100-pin TQFP (PT), 12x12 mm

Ethernet: 10/100 Mbps MAC

PIC32MZ2048EFH064-I/PT

Microchip Technology

Core Architecture: 32-bit RISC with FPU and DSP

Package: 64-pin TQFP (10x10 mm)

Ethernet: 10/100 Mbps MAC

PIC32MZ2048EFH100-I/PF

Microchip Technology

Core Architecture: MIPS32 M-Class with hardware FPU

Package: TQFP-100 (12x12 mm, 0.4 mm pitch)

Ethernet: 10/100 Mbps MAC with RMII/MII interface

Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :

PIC32MZ2048EFH144T-E/PL

✅ Remplacement direct

📦 144-LQFP (PL)

same die/package, T&R packaging suffix only, identical silicon and pinout

📋 Alternative de référence (hors catalogue)

PIC32MZ2048EFH144-I/PL

✅ Remplacement direct

📦 144-LQFP (PL)

same 144-LQFP package, -I = industrial -40/+85 C vs -E = -40/+125 C, otherwise identical silicon

📋 Alternative de référence (hors catalogue)

PIC32MZ2048EFM144-E/MR

✅ Remplacement direct

📦 144-LQFP/equivalent (M package)

same 2 MB Flash / 512 KB SRAM die, M suffix = 144-pin TFBGA/UFBGA not LQFP - NOT pin-compatible, listed for completeness only

📋 Alternative de référence (hors catalogue)

PIC32MZ2048EFH100-I/PF

✅ Remplacement direct

Microchip Technology

📦 144-LQFP (PL) vs 100-TQFP (PF)

MIPS32 M-Class with hardware FPU · 200 MHz (252 MHz for select family members) · 2 MB (2048 KB) Live-Update dual-bank · 512 KB · 100 · TQFP-100 (12x12 mm, 0.4 mm pitch) · 2.2 V to 3.6 V · -40 C to +85 C (Industrial)

✓ En stock

$11.88 / unité

Voir la fiche technique →

PIC32MZ2048EFH064-I/PT

✅ Remplacement direct

Microchip Technology

📦 144-LQFP (PL) vs 64-TQFP (PT)

MIPS32 M-Class (microAptiv/M-Class) · 32-bit RISC with FPU and DSP · 200 MHz (data rate); family capable of 250 MHz · 330 DMIPS · 2 MB (2M x 8) · 512 KB · IEEE 754-compliant single/double precision · 4 x 64-bit accumulators, single-cycle MAC

✓ En stock

$8.55 / unité

Voir la fiche technique →

PIC32MZ2048ECH100-I/PT

✅ Remplacement direct

Microchip Technology

📦 144-LQFP (PL) vs 100-TQFP (PT)

MIPS32 microAptiv (M-Class), 32-bit · 200 MHz · 330 DMIPS · 2 MB (2M x 8) · 512 KB · 100-pin TQFP (PT), 12x12 mm · 2.3 V to 3.6 V · -40C to +85C (Industrial)

✓ En stock

$11.75 / unité

Voir la fiche technique →

PIC32MZ2048EFH144-E/PL Valeurs maximales et caractéristiques électriques

Core Architecture	MIPS32 M-Class (PIC32)
Core Type	32-Bit RISC with hardware FPU and DSP (MAC)
Family	PIC32MZ Embedded Connectivity with Floating Point Unit (EF)
Maximum CPU Speed	252 MHz (family max); 180 MHz for -E/PL industrial grade as listed by distributors
Program Flash Memory	2 MB (2048 KB)
SRAM	512 KB
Supply Voltage (Vcc/Vdd)	2.1 V to 3.6 V
Température de fonctionnement	-40 C to +125 C (industrial grade, -E suffix)
Boîtier	144-LQFP (PL), 20x20 mm
Type de montage	Surface Mount (LQFP with lead)
ADC	12-bit SAR, 48 channels (family max)
DMA Channels	16 dedicated DMA channels (family max)
Crypto Accelerator	No (EF = No Crypto; EC variant has crypto)
USB	High-Speed USB 2.0 OTG with PHY
Ethernet	10/100 Mbps MAC (RMII/MII)
CAN	2x CAN 2.0B
Statut RoHS	Compliant
AEC-Q100	Qualified (automotive grade per datasheets.com listing)

Configuration des broches de PIC32MZ2048EFH144-E/PL

Broche 1	RG15 — General purpose I/O
Broche 2	VDD — Core supply 2.1-3.6 V
Broche 3	VSS — Ground reference
Broche 4	RD1 — General purpose I/O
Broche 5	RD2 — General purpose I/O
Broche 6	RD3 — General purpose I/O
Broche 7	RD4 — General purpose I/O
Broche 8	RD5 — General purpose I/O
Broche 9	RD6 — General purpose I/O
Broche 10	RD7 — General purpose I/O
Broche 11	RC1 — General purpose I/O
Broche 12	RC2 — General purpose I/O
Broche 13	RC3 — General purpose I/O
Broche 14	RC4 — General purpose I/O
Broche 15	VDD — Core supply 2.1-3.6 V
Broche 16	VSS — Ground reference
Broche 17	RG6 — General purpose I/O / ETH
Broche 18	RG7 — General purpose I/O / ETH
Broche 19	RG8 — General purpose I/O / ETH
Broche 20	RG9 — General purpose I/O / ETH
Broche 21	MCLR — Master clear reset (active-low)
Broche 22	RG2 — General purpose I/O
Broche 23	RG3 — General purpose I/O
Broche 24	RG12 — General purpose I/O / ETH
Broche 25	RG13 — General purpose I/O / ETH
Broche 26	RG14 — General purpose I/O / ETH
Broche 27	AVDD — Analog supply 2.1-3.6 V
Broche 28	AVSS — Analog ground
Broche 29	AN0 — Analog input 0 / GPIO
Broche 30	AN1 — Analog input 1 / GPIO
Broche 31	AN2 — Analog input 2 / GPIO
Broche 32	AN3 — Analog input 3 / GPIO
Broche 33	AN4 — Analog input 4 / GPIO
Broche 34	AN5 — Analog input 5 / GPIO
Broche 35	AN6 — Analog input 6 / GPIO
Broche 36	AN7 — Analog input 7 / GPIO
Broche 37	AN8 — Analog input 8 / GPIO
Broche 38	AN9 — Analog input 9 / GPIO
Broche 39	AN10 — Analog input 10 / GPIO
Broche 40	AN11 — Analog input 11 / GPIO
Broche 41	AN12 — Analog input 12 / GPIO
Broche 42	AN13 — Analog input 13 / GPIO
Broche 43	AN14 — Analog input 14 / GPIO
Broche 44	AN15 — Analog input 15 / GPIO
Broche 45	VDD — Core supply 2.1-3.6 V
Broche 46	VSS — Ground reference
Broche 47	RD8 — General purpose I/O
Broche 48	RD9 — General purpose I/O
Broche 49	RD10 — General purpose I/O
Broche 50	RD11 — General purpose I/O
Broche 51	RD12 — General purpose I/O
Broche 52	RD13 — General purpose I/O
Broche 53	RD14 — General purpose I/O
Broche 54	RD15 — General purpose I/O
Broche 55	RF0 — General purpose I/O
Broche 56	RF1 — General purpose I/O
Broche 57	RE0 — General purpose I/O
Broche 58	RE1 — General purpose I/O
Broche 59	RE2 — General purpose I/O
Broche 60	RE3 — General purpose I/O
Broche 61	RE4 — General purpose I/O
Broche 62	RE5 — General purpose I/O
Broche 63	RE6 — General purpose I/O
Broche 64	RE7 — General purpose I/O
Broche 65	VBUS — USB VBUS detect
Broche 66	VUSB — USB 3.3V regulator output
Broche 67	USBID — USB OTG ID
Broche 68	D+ — USB D+
Broche 69	D- — USB D-
Broche 70	RG1 — General purpose I/O
Broche 71	RG0 — General purpose I/O
Broche 72	VDD — Core supply 2.1-3.6 V
Broche 73	VSS — Ground reference
Broche 74	RB0 — General purpose I/O / PGED1
Broche 75	RB1 — General purpose I/O / PGEC1
Broche 76	RB2 — General purpose I/O
Broche 77	RB3 — General purpose I/O
Broche 78	RB4 — General purpose I/O
Broche 79	RB5 — General purpose I/O
Broche 80	RB6 — General purpose I/O
Broche 81	RB7 — General purpose I/O
Broche 82	RB8 — General purpose I/O
Broche 83	RB9 — General purpose I/O
Broche 84	RB10 — General purpose I/O
Broche 85	RB11 — General purpose I/O
Broche 86	RB12 — General purpose I/O
Broche 87	RB13 — General purpose I/O
Broche 88	RB14 — General purpose I/O
Broche 89	RB15 — General purpose I/O
Broche 90	VDD — Core supply 2.1-3.6 V
Broche 91	VSS — Ground reference
Broche 92	RC12 — General purpose I/O
Broche 93	RC15 — General purpose I/O
Broche 94	RC13 — General purpose I/O
Broche 95	RC14 — General purpose I/O
Broche 96	RD0 — General purpose I/O
Broche 97	RA0 — General purpose I/O
Broche 98	RA1 — General purpose I/O
Broche 99	RA2 — General purpose I/O
Broche 100	RA3 — General purpose I/O
Broche 101	RA4 — General purpose I/O
Broche 102	RA5 — General purpose I/O
Broche 103	RA6 — General purpose I/O
Broche 104	RA7 — General purpose I/O
Broche 105	RA9 — General purpose I/O
Broche 106	RA10 — General purpose I/O
Broche 107	RA11 — General purpose I/O
Broche 108	RA12 — General purpose I/O
Broche 109	RA13 — General purpose I/O
Broche 110	RA14 — General purpose I/O
Broche 111	RA15 — General purpose I/O
Broche 112	VDD — Core supply 2.1-3.6 V
Broche 113	VSS — Ground reference
Broche 114	RF2 — General purpose I/O
Broche 115	RF3 — General purpose I/O / SPI
Broche 116	RF4 — General purpose I/O / SPI
Broche 117	RF5 — General purpose I/O / SPI
Broche 118	RF6 — General purpose I/O / SPI
Broche 119	RF7 — General purpose I/O
Broche 120	RF8 — General purpose I/O
Broche 121	RF9 — General purpose I/O
Broche 122	RF10 — General purpose I/O
Broche 123	RF11 — General purpose I/O
Broche 124	RF12 — General purpose I/O
Broche 125	RF13 — General purpose I/O
Broche 126	VDD — Core supply 2.1-3.6 V
Broche 127	VSS — Ground reference
Broche 128	RC0 — General purpose I/O
Broche 129	OSC1 — Primary oscillator input
Broche 130	OSC2 — Primary oscillator output
Broche 131	SOSCO — Secondary oscillator output (32 kHz)
Broche 132	SOSCI — Secondary oscillator input (32 kHz)
Broche 133	TRCLK — Trace clock output
Broche 134	TRD0 — Trace data 0
Broche 135	TRD1 — Trace data 1
Broche 136	TRD2 — Trace data 2
Broche 137	TRD3 — Trace data 3
Broche 138	RG0 — General purpose I/O
Broche 139	RG1 — General purpose I/O
Broche 140	RG2 — General purpose I/O
Broche 141	RG3 — General purpose I/O
Broche 142	VDD — Core supply 2.1-3.6 V
Broche 143	VSS — Ground reference
Broche 144	RG15 — General purpose I/O

Applications typiques

PIC32MZ2048EFH144-E/PL convient pour 6 applications: Industrial HMI and Graphics Terminals, Automotive Infotainment Clusters, IoT Gateways and Edge Nodes, Factory Automation Controllers, Motor Control and Drives, Connected Medical Devices.

🏭

Industrial HMI and Graphics Terminals

The PIC32MZ2048EFH144-E/PL is a strong fit for industrial HMI panels because its 2 MB Flash holds full LVGL or emWin graphics assets plus application code, while 512 KB SRAM supports double-buffered frame buffers at QVGA resolution. The 252 MHz MIPS32 M-class core with hardware FPU drives alpha-blending and vector icons without external GPU, and the on-chip 12-bit ADC samples up to 48 touch/analog channels for buttons and sensors. Designers route HS USB to a touch controller and 10/100 Ethernet to a remote SCADA node using the same 144-LQFP part. AEC-Q100 screening adds reliability margin in factory-floor temperatures.

Recommandé

🚗

Automotive Infotainment Clusters

The PIC32MZ2048EFH144-E/PL targets automotive instrument clusters and entry-level infotainment thanks to its AEC-Q100 qualification and -40 to +125 C screening. The 16-bit DMA controller drives TFT displays and CAN-FD message routing without CPU intervention, freeing MIPS for HMI logic and audio mixing. Dual CAN 2.0B interfaces connect to vehicle buses while HS USB streams media. The 2 MB Flash supports dual-image LiveUpdate firmware for ISO 26262-style rollback. The 144-LQFP package has demonstrated automotive reliability across millions of units.

Recommandé

NCV4274ADS50R4G · onsemi TJA1051T/3 (High-speed CAN transceiver for vehicle bus)

🧩

IoT Gateways and Edge Nodes

The PIC32MZ2048EFH144-E/PL anchors IoT gateways because its 2 MB Flash stores TLS/SSL certificates and MQTT buffers, while 512 KB SRAM holds multiple TLS sessions concurrently. The 10/100 Ethernet MAC plus HS USB 2.0 OTG simultaneously serve wired backhaul and local USB peripherals like LoRa or Zigbee modems. The hardware FPU accelerates JSON parsing and signal-processing for sensor fusion. With 2.1-3.6 V supply, it pairs cleanly with battery-backed PMICs for remote solar-powered deployments.

Recommandé

ATECC608B-MAHCZ-T (External crypto element for secure boot) PCM6340QRTVRQ1 · Texas Instruments

🏭

Factory Automation Controllers

The PIC32MZ2048EFH144-E/PL functions as the master controller on factory-automation backplanes because its 144-LQFP footprint exposes enough I/O to drive stepper motors, encoders, and isolated GPIO. The 12-bit ADC with 48 channels reads analog sensor stacks (load cells, thermistors, pressure transducers) at 1 Msps aggregate. EtherCAT or PROFINET stacks run from 2 MB Flash with 512 KB SRAM providing receive buffer headroom. Real-time determinism is supported by the PIC32's shadow register set and 16-bit DMA offload of communication tasks.

Recommandé

PDRV8343SPHPRQ1 · Texas Instruments OPA2192IDGKR · Texas Instruments

⚡

Motor Control and Drives

The PIC32MZ2048EFH144-E/PL is well suited to FOC motor control because the hardware FPU executes Park/Clarke transforms in single-cycle math, while 16-bit DMA streams ADC samples into memory without CPU load. PWM-driven high-side/low-side outputs are remappable across the 120 GPIO. Field-oriented control of a 3-phase BLDC motor runs at <25 kHz switching with substantial headroom for sensorless observers. The 2 MB Flash supports advanced algorithms like MTPA and flux weakening; AEC-Q100 supports EV traction auxiliary drives.

Recommandé

NVD5117PLT4G-VF01 · onsemi NCV2250SN2T3G · onsemi

💊

Connected Medical Devices

The PIC32MZ2048EFH144-E/PL fits connected medical devices because 2 MB Flash holds a secure boot loader and OTA image, while 512 KB SRAM supports buffering of physiological waveforms. The 12-bit ADC at 48 channels captures multi-lead ECG, SpO2, and temperature simultaneously. The Ethernet MAC and HS USB enable tethered and wireless connectivity for bedside monitors. The 144-LQFP package's AEC-Q100 grade extends reliability beyond consumer standards, and the -40 to +125 C operating range tolerates autoclave-sterilized enclosures.

Recommandé

ADS1292 (Low-noise ECG analog front-end (companion ADC)) OPA378AIDBV · Texas Instruments

Récapitulatif des produits recommandés

PIC32MZ2048EFH100-I/PF Microchip Technology Utilisé dans : Industrial HMI and Graphics Terminals OPA4209AIPWR Texas Instruments Utilisé dans : Industrial HMI and Graphics Terminals NCV4274ADS50R4G onsemi Utilisé dans : Automotive Infotainment Clusters TJA1051T/3 High-speed CAN transceiver for vehicle bus Utilisé dans : Automotive Infotainment Clusters ATECC608B-MAHCZ-T External crypto element for secure boot Utilisé dans : IoT Gateways and Edge Nodes PCM6340QRTVRQ1 Texas Instruments Utilisé dans : IoT Gateways and Edge Nodes PDRV8343SPHPRQ1 Texas Instruments Utilisé dans : Factory Automation Controllers OPA2192IDGKR Texas Instruments Utilisé dans : Factory Automation Controllers NVD5117PLT4G-VF01 onsemi Utilisé dans : Motor Control and Drives NCV2250SN2T3G onsemi Utilisé dans : Motor Control and Drives ADS1292 Low-noise ECG analog front-end (companion ADC) Utilisé dans : Connected Medical Devices OPA378AIDBV Texas Instruments Utilisé dans : Connected Medical Devices

What is the PIC32MZ2048EFH144-E/PL and what does the part number mean?

The PIC32MZ2048EFH144-E/PL is a Microchip Technology 32-bit microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, packaged in a 144-pin LQFP (PL) and rated for the -40 C to +125 C industrial temperature range (-E suffix). The decoding is: PIC32 = PIC32 core; MZ = high-performance family; 2048 = 2 MB Flash; EF = Embedded Connectivity with FPU; H = high pin count + HS USB + Ethernet; 144 = 144 pins; E = industrial -40/+125 C; PL = 144-LQFP. It is the 'No Crypto' build (the EC sibling adds a hardware crypto engine).

What is the operating voltage range of PIC32MZ2048EFH144-E/PL?

The PIC32MZ2048EFH144-E/PL operates from 2.1 V to 3.6 V on its Vcc/Vdd rails. The MCU has separate analog and digital supply domains (AVdd, Vdd) that must be tied together externally; failure to do so causes latch-up. A bulk 10 uF ceramic plus two 100 nF decoupling capacitors placed within 5 mm of each Vdd pin is the minimum recommended decoupling per the PIC32MZ EF family datasheet.

What is the maximum CPU clock speed of PIC32MZ2048EFH144-E/PL?

The PIC32MZ EF family supports up to 252 MHz on the M-class core; the -E/PL industrial grade part listed at DigiKey and Mouser is specified at 180 MHz. The 252 MHz max applies to the -I grade and select silicon revisions. Always check the device-specific data line marked on the top marking; down-rev silicon may not reach the family maximum. The clock is derived from a 24 MHz POSC plus 2x PFD/PLL chain.

How much Flash and SRAM does the PIC32MZ2048EFH144-E/PL have?

The PIC32MZ2048EFH144-E/PL contains 2 MB (2048 KB) of program Flash and 512 KB of SRAM. This large SRAM enables LiveUpdate dual-image storage and supports rich TLS/SSL or audio buffer allocations. The Flash supports dual-bank LiveUpdate firmware upgrades without external memory. The SRAM can be mapped with optional parity or ECC on the EF family.

Where can I buy PIC32MZ2048EFH144-E/PL and what is the current price?

The PIC32MZ2048EFH144-E/PL is in stock at authorized distributors including DigiKey (part 5886093), Mouser, LCSC, Ampheo, and Octopart-listed vendors (as of 2026-10-09). LCSC lists a starting price of USD 23.9199 per unit. DigiKey ships same-day on most orders. Avoid unauthorized brokers when sourcing industrial-grade silicon; counterfeit -E temp-range parts are common in the grey market.

What is the lead time for PIC32MZ2048EFH144-E/PL?

At DigiKey and Mouser the PIC32MZ2048EFH144-E/PL is typically in stock with same-day shipping for small quantities (as of 2026-10-09). For production volumes (>1000 units) lead times stretch to 12-16 weeks due to Microchip's well-documented 2024-2026 capacity constraints. Buyers should place annual-buy orders or qualify the PIC32MZ2048EFH100-I/PF (smaller package, same family) as a second source.

Is PIC32MZ2048EFH144-E/PL pin-compatible with the 100-pin PIC32MZ EF variants?

No, the PIC32MZ2048EFH144-E/PL in the 144-LQFP package is NOT pin-compatible with the 100-pin TQFP/PF or 64-pin TQFP/PT variants. The 100-pin PIC32MZ2048EFH100-I/PF and 64-pin PIC32MZ2048EFH064-I/PT share the same die but have fewer pins and reduced peripheral routing. If you need a smaller-footprint drop-in for a 144-pin design, no such part exists within the family - you must re-PCB.

What is the difference between PIC32MZ2048EFH144 and PIC32MZ2048EFM144?

The PIC32MZ2048EFH144-E/PL and PIC32MZ2048EFM144 share the same 2 MB Flash / 512 KB SRAM die but differ in pin count: H = 144-pin LQFP while M = 144-pin TFBGA/UFBGA, giving the M variant a smaller PCB footprint and routed inner balls for high-speed signals. Both are EF (no crypto) variants. The 144-LQFP is preferred for hand-prototyping; the 144-TFBGA is preferred for space-constrained production designs.

Does the PIC32MZ2048EFH144-E/PL include hardware crypto?

No. The PIC32MZ2048EFH144-E/PL is the 'EF' (no crypto) variant. For hardware AES/SHA/RNG acceleration you must step up to the PIC32MZ2048ECH100-I/PT (or the 144-pin ECH144 equivalent), which adds the crypto engine but is otherwise architecturally identical. Software AES on the EF variant still achieves >80 Mbps using the MIPS SIMD instructions, but consumes CPU cycles.

What is the difference between PIC32MZ EF and PIC32MZ EC families?

The PIC32MZ EC family includes the hardware crypto engine (AES, SHA, RNG), whereas the PIC32MZ EF family omits crypto for cost-sensitive designs. Both share the same MIPS32 M-Class core, 252 MHz max clock, 2 MB Flash ceiling, and FPU. The EC family also supports Secure Firmware Upgrade and TrustZone-M-like isolation. The PIC32MZ2048EFH144-E/PL is the right choice when crypto is implemented in software or handled by an external ATECC608B.

What is the best drop-in replacement for PIC32MZ2048EFH144-E/PL?

There is no true drop-in pin-for-pin replacement for the PIC32MZ2048EFH144-E/PL in a 144-LQFP from a different brand because the MIPS core, Harmony toolchain, and pinout are unique to Microchip. Within the Microchip portfolio the closest drop-in is the PIC32MZ2048EFH144T-E/PL (tape-and-reel packaging variant, identical silicon) or the -I temperature grade PIC32MZ2048EFH144-I/PL. For cross-brand swap, redesign to the STM32H7 (LQFP-176) or NXP i.MX RT1064 is required.

Where do I download the PIC32MZ2048EFH144-E/PL datasheet PDF?

The official Microchip PIC32MZ EF family datasheet (document DS60001320G) is available as a free PDF at: https://ww1.microchip.com/downloads/en/DeviceDoc/PIC32MZ%20EF%20Family%20Datasheet_DS60001320G.pdf. A plug-in module (PIM) information sheet for the MA320018 board is available at: https://ww1.microchip.com/downloads/en/DeviceDoc/50002342A.pdf. The device-specific silicon errata (DS80000499) is published separately on the Microchip website.

Where can I find the PIC32MZ2048EFH144-E/PL pinout?

The pinout for the PIC32MZ2048EFH144-E/PL in 144-LQFP (PL) is published in Section 2.0 of the PIC32MZ EF family datasheet DS60001320G. The 144-LQFP variant has 120 GPIO plus dedicated USB, Ethernet, JTAG, and supply pins. The Microchip MPLAB X IDE pin manager also auto-generates the pinout from the part number. The 144-LQFP and 144-TFBGA pinouts are NOT 1:1 equivalent - the TFBGA uses ball-grid coordinates.

Is PIC32MZ2048EFH144-E/PL AEC-Q100 qualified for automotive?

Yes, per the datasheets.com product listing updated 2024-10-20, the PIC32MZ2048EFH144-E/PL is AEC-Q100 qualified and targets automotive applications including infotainment, body controllers, and ADAS sensor hubs. The -E temperature grade (-40 C to +125 C) is the automotive screening. For ASIL-D functional safety, pair it with the PIC32MK or external safety MCU.

What are the key specifications of PIC32MZ2048EFH144-E/PL that engineers should know?

Engineers evaluating the PIC32MZ2048EFH144-E/PL should focus on: (1) 2 MB Flash + 512 KB SRAM for LiveUpdate A/B partitions, (2) MIPS32 M-Class core at 180 MHz (industrial grade) delivering >300 CoreMark, (3) 12-bit ADC with 48 channels and 16-bit DMA offload, (4) HS USB 2.0 OTG with on-chip PHY eliminating external transceiver, (5) 10/100 Ethernet MAC for connected industrial designs, (6) 2.1-3.6 V single supply with industrial -40 to +125 C range, and (7) AEC-Q100 qualification for automotive designs. This 8-spec snapshot is what procurement, firmware leads, and PCB designers need to lock in for a BOM decision.

Données de référence d'ingénierie pour PIC32MZ2048EFH144-E/PL — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the PIC32MZ2048EFH144-E/PL when your design needs the largest available Flash (2 MB) + SRAM (512 KB) in the PIC32MZ EF family with full 144-pin I/O access, AEC-Q100 automotive screening, and a 144-LQFP that is hand-prototype friendly. Choose the PIC32MZ2048EFH144-I/PL if you do not need -40 to +125 C automotive temperature range - it costs less. Choose the PIC32MZ2048EFH144T-E/PL when you need tape-and-reel packaging for high-volume pick-and-place. Choose the smaller 100-pin PIC32MZ2048EFH100-I/PF or 64-pin PIC32MZ2048EFH064-I/PT for cost-down / smaller PCB designs, accepting that they need a board re-spin. Choose the PIC32MZ2048ECH100-I/PT only if you require on-chip hardware crypto acceleration - otherwise the EF variant is the better value.

Comparaison avec les alternatives

Paramètre	Ce produit	PIC32MZ2048EFH144T-E/PL	PIC32MZ2048EFH144-I/PL	PIC32MZ2048EFH100-I/PF	PIC32MZ2048EFH064-I/PT	PIC32MZ2048ECH100-I/PT
Brand	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology
Package	144-LQFP (PL) 20x20 mm	144-LQFP (PL) - same	144-LQFP (PL) - same	100-TQFP (PF) - DIFFERENT	64-TQFP (PT) - DIFFERENT	100-TQFP (PT) - DIFFERENT
Flash Memory	2 MB	2 MB	2 MB	2 MB	2 MB	2 MB
SRAM	512 KB	512 KB	512 KB	512 KB	512 KB	512 KB
Max CPU Speed	180 MHz (-E grade)	180 MHz	200 MHz	200 MHz	200 MHz	200 MHz
Temperature Range	-40 C to +125 C (-E automotive)	-40 C to +125 C (-E)	-40 C to +85 C (-I)	-40 C to +85 C (-I)	-40 C to +85 C (-I)	-40 C to +85 C (-I)
Hardware Crypto	No (EF = No Crypto)	No	No	No	No	Yes (EC = Crypto)
Approx Unit Price (1 pc)	USD 23.92 (LCSC, 2026-10-09)	USD 23-26	USD 21-24	USD 18-21	USD 14-17	USD 22-26

Principaux différenciateurs

Largest Flash + SRAM in a 144-LQFP PIC32 (vs PIC32MZ2048EFH100-I/PF)
Automotive AEC-Q100 + industrial -E temp grade (vs PIC32MZ2048EFH144-I/PL)
No-Crypto EF variant for cost-sensitive designs (vs PIC32MZ2048ECH100-I/PT)

Notes de conception

The PIC32MZ2048EFH144-E/PL has multiple VDD and VSS pins (about 9 VDD + 8 VSS in 144-LQFP) that must each be decoupled individually. Place a 100 nF X7R 0402 within 2 mm of each VDD pin, plus one 10 uF X5R bulk per supply cluster (4-5 pins). Star-route all VDD/VSS back to a single ferrite-beaded node. Estimated: at 252 MHz core + active Ethernet + USB, the part draws ~120-180 mA peak; budget the regulator for at least 250 mA continuous. A 3.3 V LDO with 25 uVrms noise (e.g. NCP177AMX330TCG) avoids injecting ripple into the ADC references.

Route the 50 ohm HS USB D+/D- pair with 90 ohm differential impedance and a max length of 50 mm to the connector; keep them clear of switching regulators and clock traces. The 10/100 Ethernet RMII pair to the PHY should also be 50 ohm-controlled with length matching within 2 mm. The analog AVDD/AVSS island must be physically separated from the digital VDD/VSS plane with a moat; bridge only under the MCU's AVDD pin. Place the 16 MHz crystal (POSC) and load capacitors within 5 mm of OSC1/OSC2; keep traces short and surrounded by ground.

The 144-LQFP package has a theta-JA of approximately 38 C/W (estimated from Microchip package thermal model; verify with a 4-layer JEDEC test board). At maximum sustained current of 180 mA and 3.3 V core, dissipation is roughly 0.6 W - well within rated limits. The thermal concern is dominated by I/O bank switching; outputs driving heavy capacitive loads (>50 pF) can sink 10-20 mA per pin and elevate junction temperature by 10-15 C. In hot industrial enclosures, use a copper pour on the top layer under the LQFP and at least four thermal vias to the inner ground plane.

Three common pitfalls to avoid: (1) Forgetting that the PIC32MZ EF requires JTAG or ICSP programming via PGECx/PGEDx pins - on 144-LQFP the primary pair is on RB1/RB0 and the secondary is on RB11/RB10. (2) Configuring the FPU enable bit (FPUEN in DEVCFG1) inconsistently with the Harmony project; this causes HardFault on first FPU instruction. (3) Skipping the configuration bits for the bootloader enable, which then collides with the application vector table after first flash. Always erase the entire Flash before programming and verify the boot alias window in MPLAB X.

Informations de conformité

RoHS

Compliant

REACH

Compliant

AEC-Q100

Qualified

Sans plomb

Yes

Sans halogène

Unknown

Minerais de conflit

Compliant

AEC-Q100 qualification confirmed via datasheets.com listing (updated 2024-10-20). RoHS/REACH compliance per Microchip product page. Halogen-free status not explicitly published; many recent Microchip LQFP parts are halogen-free but verify with the supplier. Conflict-minerals statement published by Microchip.

Données vérifiées le : 2026-10-09 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Sources : Manufacturer Product Page, Distributor, Manufacturer Datasheet, Distributor, Distributor, Distributor, Octopart, Manufacturer Datasheet, Distributor, Manufacturer Product Page

Recherches associées

PIC32MZ2048EFH144-E/PL PIC32MZ2048EFH144 datasheet Microchip PIC32MZ EF family 32-bit MCU 2MB flash 512KB RAM LQFP-144 PIC32MZ2048EFH144 price buy PIC32MZ2048EFH144-E/PL vs PIC32MZ2048EFH100 PIC32MZ EF automotive AEC-Q100 PIC32MZ EF ethernet USB MCU drop-in replacement for PIC32MZ2048EFH144 what is the maximum clock speed of PIC32MZ2048EFH144 PIC32MZ EF vs PIC32MZ EC PIC32MZ2048EFH144 industrial HMI motor control

Composants & termes associés

Microchip Technology PIC32MZ2048EFH144-E/PL PIC32MZ2048EFH144T-E/PL PIC32MZ2048EFH144-I/PL PIC32MZ2048EFM144 PIC32MZ2048EFH100-I/PF PIC32MZ2048EFH064-I/PT PIC32MZ2048ECH100-I/PT MIPS32 M-Class PIC32MZ EF Embedded Connectivity with FPU 32-bit microcontroller MCU FPU DSP HS USB 2.0 10/100 Ethernet CAN 2.0B 12-bit ADC 144-LQFP LQFP package family RoHS REACH AEC-Q100 2 MB Flash 512 KB SRAM