Microchip Technology

PIC32MZ2048EFH144-E/PL - 32-Bit MCU, 2MB Flash, 144-LQFP | Microchip

부품 번호: PIC32MZ2048EFH144-E/PL ✓ 활성

재고 있음 영업일 기준 1~3일 내 발송

2.1 V to 3.6 V Vdss 144-LQFP (PL), 20x20 mm Package 252 MHz (family max); 180 MHz for -E/PL industrial grade as listed by distributors Speed 2 MB (2048 KB) Memory

시작가 $14.95 USD / 개

MOQ: 1 |

가격 업데이트: 2026-10-09

볼륨 가격

수량	단가	합계
1	$23.92	$23.92
10	$21.53	$215.30
100	$18.74	$1,874.00
500	$16.82	$8,410.00
1,000	$14.95	$14,950.00

ℹ️ 모든 가격은 USD 기준입니다

데이터시트 보기 (PDF) 대체품 보기

수량

PIC32MZ2048EFH144-E/PL 개요

The Microchip Technology PIC32MZ2048EFH144-E/PL is a high-performance 32-bit MIPS M-Class microcontroller from the PIC32MZ EF family, integrating up to 2 MB of Flash program memory and 512 KB of SRAM in a 144-pin LQFP (20x20 mm) industrial-grade package. It runs up to 252 MHz (the E/PL industrial grade is screened for 180 MHz operation per the published DigiKey/Mouser listings), delivers a MIPS32 M-Class core with single-cycle MAC and hardware FPU, and provides a rich connectivity peripheral set including HS USB, 10/100 Ethernet MAC, CAN 2.0, SQI, multiple UART/SPI/I2C, 16-bit DMA, and a 48-channel 12-bit ADC.

A 32-bit microcontroller (MCU) is a single-chip processor that executes 32-bit instructions in a single cycle and integrates Flash, SRAM, and peripherals on one die. Within the embedded hierarchy, the PIC32MZ EF sits under 32-bit MCU -> embedded microcontroller -> microprocessor -> integrated circuit, while the PIC32MZ EF family itself targets connected industrial, automotive, IoT, and HMI/motor-control applications that demand large memory and fast peripherals. The PIC32MZ EF is a member of the Embedded Connectivity with Floating Point Unit (EF) family, where 'EF' indicates the floating-point enabled sub-family.

Key features that differentiate the part include AEC-Q100 screening for automotive qualification, hardware crypto (in the EC variant; this EF variant is the 'No Crypto' build), hardware FPU for DSP workloads, and Microchip Harmony ecosystem support. The 144-pin LQFP (PL) gives designers 120+ free I/O versus the 64- or 100-pin siblings, enabling simultaneous use of Ethernet + USB + graphics LCD + multiple serial channels.

Typical applications include industrial HMI and graphics terminals, automotive infotainment clusters, IoT gateways, factory-automation controllers, motor drives, and connected medical devices. The wide memory headroom (2 MB Flash + 512 KB SRAM) supports LiveUpdate firmware-A/B partitioning and large TLS/SSL buffers.

When designing with this device, ensure the 2.1-3.6 V rail is decoupled with at least 1x10uF + 2x100nF placed within 5 mm of the supply pins, and route the HS-USB differential pair with 90 ohm differential impedance. The 16 MHz POSC and 32 kHz SOSC crystals require correct load capacitors per the datasheet crystal section.

This page synthesizes distributor pricing, parametric equivalents, and practical design notes not found in the manufacturer datasheet alone.

드롭인 대체품: PIC32MZ2048EFH144-E/PL — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MZ2048EFH144-E/PL (동일 폼 팩터 및 풋프린트) — 차이점: Core Architecture, Package, Ethernet, Operating Temperature, ADC.

PIC32MZ2048ECH100-I/PT

Microchip Technology

Core Architecture: MIPS32 microAptiv (M-Class), 32-bit

Package: 100-pin TQFP (PT), 12x12 mm

Ethernet: 10/100 Mbps MAC

PIC32MZ2048EFH064-I/PT

Microchip Technology

Core Architecture: 32-bit RISC with FPU and DSP

Package: 64-pin TQFP (10x10 mm)

Ethernet: 10/100 Mbps MAC

PIC32MZ2048EFH100-I/PF

Microchip Technology

Core Architecture: MIPS32 M-Class with hardware FPU

Package: TQFP-100 (12x12 mm, 0.4 mm pitch)

Ethernet: 10/100 Mbps MAC with RMII/MII interface

빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:

PIC32MZ2048EFH144T-E/PL

✅ 드롭인

📦 144-LQFP (PL)

same die/package, T&R packaging suffix only, identical silicon and pinout

📋 참조 대체품 (카탈로그에 없음)

PIC32MZ2048EFH144-I/PL

✅ 드롭인

📦 144-LQFP (PL)

same 144-LQFP package, -I = industrial -40/+85 C vs -E = -40/+125 C, otherwise identical silicon

📋 참조 대체품 (카탈로그에 없음)

PIC32MZ2048EFM144-E/MR

✅ 드롭인

📦 144-LQFP/equivalent (M package)

same 2 MB Flash / 512 KB SRAM die, M suffix = 144-pin TFBGA/UFBGA not LQFP - NOT pin-compatible, listed for completeness only

📋 참조 대체품 (카탈로그에 없음)

PIC32MZ2048EFH100-I/PF

✅ 드롭인

Microchip Technology

📦 144-LQFP (PL) vs 100-TQFP (PF)

MIPS32 M-Class with hardware FPU · 200 MHz (252 MHz for select family members) · 2 MB (2048 KB) Live-Update dual-bank · 512 KB · 100 · TQFP-100 (12x12 mm, 0.4 mm pitch) · 2.2 V to 3.6 V · -40 C to +85 C (Industrial)

✓ 재고 있음

$11.88 / 개

데이터시트 보기 →

PIC32MZ2048EFH064-I/PT

✅ 드롭인

Microchip Technology

📦 144-LQFP (PL) vs 64-TQFP (PT)

MIPS32 M-Class (microAptiv/M-Class) · 32-bit RISC with FPU and DSP · 200 MHz (data rate); family capable of 250 MHz · 330 DMIPS · 2 MB (2M x 8) · 512 KB · IEEE 754-compliant single/double precision · 4 x 64-bit accumulators, single-cycle MAC

✓ 재고 있음

$8.55 / 개

데이터시트 보기 →

PIC32MZ2048ECH100-I/PT

✅ 드롭인

Microchip Technology

📦 144-LQFP (PL) vs 100-TQFP (PT)

MIPS32 microAptiv (M-Class), 32-bit · 200 MHz · 330 DMIPS · 2 MB (2M x 8) · 512 KB · 100-pin TQFP (PT), 12x12 mm · 2.3 V to 3.6 V · -40C to +85C (Industrial)

✓ 재고 있음

$11.75 / 개

데이터시트 보기 →

PIC32MZ2048EFH144-E/PL 최대 정격 & 전기적 특성

Core Architecture	MIPS32 M-Class (PIC32)
Core Type	32-Bit RISC with hardware FPU and DSP (MAC)
Family	PIC32MZ Embedded Connectivity with Floating Point Unit (EF)
Maximum CPU Speed	252 MHz (family max); 180 MHz for -E/PL industrial grade as listed by distributors
Program Flash Memory	2 MB (2048 KB)
SRAM	512 KB
Supply Voltage (Vcc/Vdd)	2.1 V to 3.6 V
동작 온도	-40 C to +125 C (industrial grade, -E suffix)
패키지	144-LQFP (PL), 20x20 mm
실장 유형	Surface Mount (LQFP with lead)
ADC	12-bit SAR, 48 channels (family max)
DMA Channels	16 dedicated DMA channels (family max)
Crypto Accelerator	No (EF = No Crypto; EC variant has crypto)
USB	High-Speed USB 2.0 OTG with PHY
Ethernet	10/100 Mbps MAC (RMII/MII)
CAN	2x CAN 2.0B
RoHS 상태	Compliant
AEC-Q100	Qualified (automotive grade per datasheets.com listing)

PIC32MZ2048EFH144-E/PL 핀 구성

핀 1	RG15 — General purpose I/O
핀 2	VDD — Core supply 2.1-3.6 V
핀 3	VSS — Ground reference
핀 4	RD1 — General purpose I/O
핀 5	RD2 — General purpose I/O
핀 6	RD3 — General purpose I/O
핀 7	RD4 — General purpose I/O
핀 8	RD5 — General purpose I/O
핀 9	RD6 — General purpose I/O
핀 10	RD7 — General purpose I/O
핀 11	RC1 — General purpose I/O
핀 12	RC2 — General purpose I/O
핀 13	RC3 — General purpose I/O
핀 14	RC4 — General purpose I/O
핀 15	VDD — Core supply 2.1-3.6 V
핀 16	VSS — Ground reference
핀 17	RG6 — General purpose I/O / ETH
핀 18	RG7 — General purpose I/O / ETH
핀 19	RG8 — General purpose I/O / ETH
핀 20	RG9 — General purpose I/O / ETH
핀 21	MCLR — Master clear reset (active-low)
핀 22	RG2 — General purpose I/O
핀 23	RG3 — General purpose I/O
핀 24	RG12 — General purpose I/O / ETH
핀 25	RG13 — General purpose I/O / ETH
핀 26	RG14 — General purpose I/O / ETH
핀 27	AVDD — Analog supply 2.1-3.6 V
핀 28	AVSS — Analog ground
핀 29	AN0 — Analog input 0 / GPIO
핀 30	AN1 — Analog input 1 / GPIO
핀 31	AN2 — Analog input 2 / GPIO
핀 32	AN3 — Analog input 3 / GPIO
핀 33	AN4 — Analog input 4 / GPIO
핀 34	AN5 — Analog input 5 / GPIO
핀 35	AN6 — Analog input 6 / GPIO
핀 36	AN7 — Analog input 7 / GPIO
핀 37	AN8 — Analog input 8 / GPIO
핀 38	AN9 — Analog input 9 / GPIO
핀 39	AN10 — Analog input 10 / GPIO
핀 40	AN11 — Analog input 11 / GPIO
핀 41	AN12 — Analog input 12 / GPIO
핀 42	AN13 — Analog input 13 / GPIO
핀 43	AN14 — Analog input 14 / GPIO
핀 44	AN15 — Analog input 15 / GPIO
핀 45	VDD — Core supply 2.1-3.6 V
핀 46	VSS — Ground reference
핀 47	RD8 — General purpose I/O
핀 48	RD9 — General purpose I/O
핀 49	RD10 — General purpose I/O
핀 50	RD11 — General purpose I/O
핀 51	RD12 — General purpose I/O
핀 52	RD13 — General purpose I/O
핀 53	RD14 — General purpose I/O
핀 54	RD15 — General purpose I/O
핀 55	RF0 — General purpose I/O
핀 56	RF1 — General purpose I/O
핀 57	RE0 — General purpose I/O
핀 58	RE1 — General purpose I/O
핀 59	RE2 — General purpose I/O
핀 60	RE3 — General purpose I/O
핀 61	RE4 — General purpose I/O
핀 62	RE5 — General purpose I/O
핀 63	RE6 — General purpose I/O
핀 64	RE7 — General purpose I/O
핀 65	VBUS — USB VBUS detect
핀 66	VUSB — USB 3.3V regulator output
핀 67	USBID — USB OTG ID
핀 68	D+ — USB D+
핀 69	D- — USB D-
핀 70	RG1 — General purpose I/O
핀 71	RG0 — General purpose I/O
핀 72	VDD — Core supply 2.1-3.6 V
핀 73	VSS — Ground reference
핀 74	RB0 — General purpose I/O / PGED1
핀 75	RB1 — General purpose I/O / PGEC1
핀 76	RB2 — General purpose I/O
핀 77	RB3 — General purpose I/O
핀 78	RB4 — General purpose I/O
핀 79	RB5 — General purpose I/O
핀 80	RB6 — General purpose I/O
핀 81	RB7 — General purpose I/O
핀 82	RB8 — General purpose I/O
핀 83	RB9 — General purpose I/O
핀 84	RB10 — General purpose I/O
핀 85	RB11 — General purpose I/O
핀 86	RB12 — General purpose I/O
핀 87	RB13 — General purpose I/O
핀 88	RB14 — General purpose I/O
핀 89	RB15 — General purpose I/O
핀 90	VDD — Core supply 2.1-3.6 V
핀 91	VSS — Ground reference
핀 92	RC12 — General purpose I/O
핀 93	RC15 — General purpose I/O
핀 94	RC13 — General purpose I/O
핀 95	RC14 — General purpose I/O
핀 96	RD0 — General purpose I/O
핀 97	RA0 — General purpose I/O
핀 98	RA1 — General purpose I/O
핀 99	RA2 — General purpose I/O
핀 100	RA3 — General purpose I/O
핀 101	RA4 — General purpose I/O
핀 102	RA5 — General purpose I/O
핀 103	RA6 — General purpose I/O
핀 104	RA7 — General purpose I/O
핀 105	RA9 — General purpose I/O
핀 106	RA10 — General purpose I/O
핀 107	RA11 — General purpose I/O
핀 108	RA12 — General purpose I/O
핀 109	RA13 — General purpose I/O
핀 110	RA14 — General purpose I/O
핀 111	RA15 — General purpose I/O
핀 112	VDD — Core supply 2.1-3.6 V
핀 113	VSS — Ground reference
핀 114	RF2 — General purpose I/O
핀 115	RF3 — General purpose I/O / SPI
핀 116	RF4 — General purpose I/O / SPI
핀 117	RF5 — General purpose I/O / SPI
핀 118	RF6 — General purpose I/O / SPI
핀 119	RF7 — General purpose I/O
핀 120	RF8 — General purpose I/O
핀 121	RF9 — General purpose I/O
핀 122	RF10 — General purpose I/O
핀 123	RF11 — General purpose I/O
핀 124	RF12 — General purpose I/O
핀 125	RF13 — General purpose I/O
핀 126	VDD — Core supply 2.1-3.6 V
핀 127	VSS — Ground reference
핀 128	RC0 — General purpose I/O
핀 129	OSC1 — Primary oscillator input
핀 130	OSC2 — Primary oscillator output
핀 131	SOSCO — Secondary oscillator output (32 kHz)
핀 132	SOSCI — Secondary oscillator input (32 kHz)
핀 133	TRCLK — Trace clock output
핀 134	TRD0 — Trace data 0
핀 135	TRD1 — Trace data 1
핀 136	TRD2 — Trace data 2
핀 137	TRD3 — Trace data 3
핀 138	RG0 — General purpose I/O
핀 139	RG1 — General purpose I/O
핀 140	RG2 — General purpose I/O
핀 141	RG3 — General purpose I/O
핀 142	VDD — Core supply 2.1-3.6 V
핀 143	VSS — Ground reference
핀 144	RG15 — General purpose I/O

일반적인 애플리케이션

PIC32MZ2048EFH144-E/PL 적합 용도: 6 애플리케이션s: Industrial HMI and Graphics Terminals, Automotive Infotainment Clusters, IoT Gateways and Edge Nodes, Factory Automation Controllers, Motor Control and Drives, Connected Medical Devices.

🏭

Industrial HMI and Graphics Terminals

The PIC32MZ2048EFH144-E/PL is a strong fit for industrial HMI panels because its 2 MB Flash holds full LVGL or emWin graphics assets plus application code, while 512 KB SRAM supports double-buffered frame buffers at QVGA resolution. The 252 MHz MIPS32 M-class core with hardware FPU drives alpha-blending and vector icons without external GPU, and the on-chip 12-bit ADC samples up to 48 touch/analog channels for buttons and sensors. Designers route HS USB to a touch controller and 10/100 Ethernet to a remote SCADA node using the same 144-LQFP part. AEC-Q100 screening adds reliability margin in factory-floor temperatures.

추천

🚗

Automotive Infotainment Clusters

The PIC32MZ2048EFH144-E/PL targets automotive instrument clusters and entry-level infotainment thanks to its AEC-Q100 qualification and -40 to +125 C screening. The 16-bit DMA controller drives TFT displays and CAN-FD message routing without CPU intervention, freeing MIPS for HMI logic and audio mixing. Dual CAN 2.0B interfaces connect to vehicle buses while HS USB streams media. The 2 MB Flash supports dual-image LiveUpdate firmware for ISO 26262-style rollback. The 144-LQFP package has demonstrated automotive reliability across millions of units.

추천

NCV4274ADS50R4G · onsemi TJA1051T/3 (High-speed CAN transceiver for vehicle bus)

🧩

IoT Gateways and Edge Nodes

The PIC32MZ2048EFH144-E/PL anchors IoT gateways because its 2 MB Flash stores TLS/SSL certificates and MQTT buffers, while 512 KB SRAM holds multiple TLS sessions concurrently. The 10/100 Ethernet MAC plus HS USB 2.0 OTG simultaneously serve wired backhaul and local USB peripherals like LoRa or Zigbee modems. The hardware FPU accelerates JSON parsing and signal-processing for sensor fusion. With 2.1-3.6 V supply, it pairs cleanly with battery-backed PMICs for remote solar-powered deployments.

추천

ATECC608B-MAHCZ-T (External crypto element for secure boot) PCM6340QRTVRQ1 · Texas Instruments

🏭

Factory Automation Controllers

The PIC32MZ2048EFH144-E/PL functions as the master controller on factory-automation backplanes because its 144-LQFP footprint exposes enough I/O to drive stepper motors, encoders, and isolated GPIO. The 12-bit ADC with 48 channels reads analog sensor stacks (load cells, thermistors, pressure transducers) at 1 Msps aggregate. EtherCAT or PROFINET stacks run from 2 MB Flash with 512 KB SRAM providing receive buffer headroom. Real-time determinism is supported by the PIC32's shadow register set and 16-bit DMA offload of communication tasks.

추천

PDRV8343SPHPRQ1 · Texas Instruments OPA2192IDGKR · Texas Instruments

⚡

Motor Control and Drives

The PIC32MZ2048EFH144-E/PL is well suited to FOC motor control because the hardware FPU executes Park/Clarke transforms in single-cycle math, while 16-bit DMA streams ADC samples into memory without CPU load. PWM-driven high-side/low-side outputs are remappable across the 120 GPIO. Field-oriented control of a 3-phase BLDC motor runs at <25 kHz switching with substantial headroom for sensorless observers. The 2 MB Flash supports advanced algorithms like MTPA and flux weakening; AEC-Q100 supports EV traction auxiliary drives.

추천

NVD5117PLT4G-VF01 · onsemi NCV2250SN2T3G · onsemi

💊

Connected Medical Devices

The PIC32MZ2048EFH144-E/PL fits connected medical devices because 2 MB Flash holds a secure boot loader and OTA image, while 512 KB SRAM supports buffering of physiological waveforms. The 12-bit ADC at 48 channels captures multi-lead ECG, SpO2, and temperature simultaneously. The Ethernet MAC and HS USB enable tethered and wireless connectivity for bedside monitors. The 144-LQFP package's AEC-Q100 grade extends reliability beyond consumer standards, and the -40 to +125 C operating range tolerates autoclave-sterilized enclosures.

추천

ADS1292 (Low-noise ECG analog front-end (companion ADC)) OPA378AIDBV · Texas Instruments

추천 제품 요약

PIC32MZ2048EFH100-I/PF Microchip Technology 사용처: Industrial HMI and Graphics Terminals OPA4209AIPWR Texas Instruments 사용처: Industrial HMI and Graphics Terminals NCV4274ADS50R4G onsemi 사용처: Automotive Infotainment Clusters TJA1051T/3 High-speed CAN transceiver for vehicle bus 사용처: Automotive Infotainment Clusters ATECC608B-MAHCZ-T External crypto element for secure boot 사용처: IoT Gateways and Edge Nodes PCM6340QRTVRQ1 Texas Instruments 사용처: IoT Gateways and Edge Nodes PDRV8343SPHPRQ1 Texas Instruments 사용처: Factory Automation Controllers OPA2192IDGKR Texas Instruments 사용처: Factory Automation Controllers NVD5117PLT4G-VF01 onsemi 사용처: Motor Control and Drives NCV2250SN2T3G onsemi 사용처: Motor Control and Drives ADS1292 Low-noise ECG analog front-end (companion ADC) 사용처: Connected Medical Devices OPA378AIDBV Texas Instruments 사용처: Connected Medical Devices

What is the PIC32MZ2048EFH144-E/PL and what does the part number mean?

The PIC32MZ2048EFH144-E/PL is a Microchip Technology 32-bit microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, packaged in a 144-pin LQFP (PL) and rated for the -40 C to +125 C industrial temperature range (-E suffix). The decoding is: PIC32 = PIC32 core; MZ = high-performance family; 2048 = 2 MB Flash; EF = Embedded Connectivity with FPU; H = high pin count + HS USB + Ethernet; 144 = 144 pins; E = industrial -40/+125 C; PL = 144-LQFP. It is the 'No Crypto' build (the EC sibling adds a hardware crypto engine).

What is the operating voltage range of PIC32MZ2048EFH144-E/PL?

The PIC32MZ2048EFH144-E/PL operates from 2.1 V to 3.6 V on its Vcc/Vdd rails. The MCU has separate analog and digital supply domains (AVdd, Vdd) that must be tied together externally; failure to do so causes latch-up. A bulk 10 uF ceramic plus two 100 nF decoupling capacitors placed within 5 mm of each Vdd pin is the minimum recommended decoupling per the PIC32MZ EF family datasheet.

What is the maximum CPU clock speed of PIC32MZ2048EFH144-E/PL?

The PIC32MZ EF family supports up to 252 MHz on the M-class core; the -E/PL industrial grade part listed at DigiKey and Mouser is specified at 180 MHz. The 252 MHz max applies to the -I grade and select silicon revisions. Always check the device-specific data line marked on the top marking; down-rev silicon may not reach the family maximum. The clock is derived from a 24 MHz POSC plus 2x PFD/PLL chain.

How much Flash and SRAM does the PIC32MZ2048EFH144-E/PL have?

The PIC32MZ2048EFH144-E/PL contains 2 MB (2048 KB) of program Flash and 512 KB of SRAM. This large SRAM enables LiveUpdate dual-image storage and supports rich TLS/SSL or audio buffer allocations. The Flash supports dual-bank LiveUpdate firmware upgrades without external memory. The SRAM can be mapped with optional parity or ECC on the EF family.

Where can I buy PIC32MZ2048EFH144-E/PL and what is the current price?

The PIC32MZ2048EFH144-E/PL is in stock at authorized distributors including DigiKey (part 5886093), Mouser, LCSC, Ampheo, and Octopart-listed vendors (as of 2026-10-09). LCSC lists a starting price of USD 23.9199 per unit. DigiKey ships same-day on most orders. Avoid unauthorized brokers when sourcing industrial-grade silicon; counterfeit -E temp-range parts are common in the grey market.

What is the lead time for PIC32MZ2048EFH144-E/PL?

At DigiKey and Mouser the PIC32MZ2048EFH144-E/PL is typically in stock with same-day shipping for small quantities (as of 2026-10-09). For production volumes (>1000 units) lead times stretch to 12-16 weeks due to Microchip's well-documented 2024-2026 capacity constraints. Buyers should place annual-buy orders or qualify the PIC32MZ2048EFH100-I/PF (smaller package, same family) as a second source.

Is PIC32MZ2048EFH144-E/PL pin-compatible with the 100-pin PIC32MZ EF variants?

No, the PIC32MZ2048EFH144-E/PL in the 144-LQFP package is NOT pin-compatible with the 100-pin TQFP/PF or 64-pin TQFP/PT variants. The 100-pin PIC32MZ2048EFH100-I/PF and 64-pin PIC32MZ2048EFH064-I/PT share the same die but have fewer pins and reduced peripheral routing. If you need a smaller-footprint drop-in for a 144-pin design, no such part exists within the family - you must re-PCB.

What is the difference between PIC32MZ2048EFH144 and PIC32MZ2048EFM144?

The PIC32MZ2048EFH144-E/PL and PIC32MZ2048EFM144 share the same 2 MB Flash / 512 KB SRAM die but differ in pin count: H = 144-pin LQFP while M = 144-pin TFBGA/UFBGA, giving the M variant a smaller PCB footprint and routed inner balls for high-speed signals. Both are EF (no crypto) variants. The 144-LQFP is preferred for hand-prototyping; the 144-TFBGA is preferred for space-constrained production designs.

Does the PIC32MZ2048EFH144-E/PL include hardware crypto?

No. The PIC32MZ2048EFH144-E/PL is the 'EF' (no crypto) variant. For hardware AES/SHA/RNG acceleration you must step up to the PIC32MZ2048ECH100-I/PT (or the 144-pin ECH144 equivalent), which adds the crypto engine but is otherwise architecturally identical. Software AES on the EF variant still achieves >80 Mbps using the MIPS SIMD instructions, but consumes CPU cycles.

What is the difference between PIC32MZ EF and PIC32MZ EC families?

The PIC32MZ EC family includes the hardware crypto engine (AES, SHA, RNG), whereas the PIC32MZ EF family omits crypto for cost-sensitive designs. Both share the same MIPS32 M-Class core, 252 MHz max clock, 2 MB Flash ceiling, and FPU. The EC family also supports Secure Firmware Upgrade and TrustZone-M-like isolation. The PIC32MZ2048EFH144-E/PL is the right choice when crypto is implemented in software or handled by an external ATECC608B.

What is the best drop-in replacement for PIC32MZ2048EFH144-E/PL?

There is no true drop-in pin-for-pin replacement for the PIC32MZ2048EFH144-E/PL in a 144-LQFP from a different brand because the MIPS core, Harmony toolchain, and pinout are unique to Microchip. Within the Microchip portfolio the closest drop-in is the PIC32MZ2048EFH144T-E/PL (tape-and-reel packaging variant, identical silicon) or the -I temperature grade PIC32MZ2048EFH144-I/PL. For cross-brand swap, redesign to the STM32H7 (LQFP-176) or NXP i.MX RT1064 is required.

Where do I download the PIC32MZ2048EFH144-E/PL datasheet PDF?

The official Microchip PIC32MZ EF family datasheet (document DS60001320G) is available as a free PDF at: https://ww1.microchip.com/downloads/en/DeviceDoc/PIC32MZ%20EF%20Family%20Datasheet_DS60001320G.pdf. A plug-in module (PIM) information sheet for the MA320018 board is available at: https://ww1.microchip.com/downloads/en/DeviceDoc/50002342A.pdf. The device-specific silicon errata (DS80000499) is published separately on the Microchip website.

Where can I find the PIC32MZ2048EFH144-E/PL pinout?

The pinout for the PIC32MZ2048EFH144-E/PL in 144-LQFP (PL) is published in Section 2.0 of the PIC32MZ EF family datasheet DS60001320G. The 144-LQFP variant has 120 GPIO plus dedicated USB, Ethernet, JTAG, and supply pins. The Microchip MPLAB X IDE pin manager also auto-generates the pinout from the part number. The 144-LQFP and 144-TFBGA pinouts are NOT 1:1 equivalent - the TFBGA uses ball-grid coordinates.

Is PIC32MZ2048EFH144-E/PL AEC-Q100 qualified for automotive?

Yes, per the datasheets.com product listing updated 2024-10-20, the PIC32MZ2048EFH144-E/PL is AEC-Q100 qualified and targets automotive applications including infotainment, body controllers, and ADAS sensor hubs. The -E temperature grade (-40 C to +125 C) is the automotive screening. For ASIL-D functional safety, pair it with the PIC32MK or external safety MCU.

What are the key specifications of PIC32MZ2048EFH144-E/PL that engineers should know?

Engineers evaluating the PIC32MZ2048EFH144-E/PL should focus on: (1) 2 MB Flash + 512 KB SRAM for LiveUpdate A/B partitions, (2) MIPS32 M-Class core at 180 MHz (industrial grade) delivering >300 CoreMark, (3) 12-bit ADC with 48 channels and 16-bit DMA offload, (4) HS USB 2.0 OTG with on-chip PHY eliminating external transceiver, (5) 10/100 Ethernet MAC for connected industrial designs, (6) 2.1-3.6 V single supply with industrial -40 to +125 C range, and (7) AEC-Q100 qualification for automotive designs. This 8-spec snapshot is what procurement, firmware leads, and PCB designers need to lock in for a BOM decision.

엔지니어링 참조 데이터: PIC32MZ2048EFH144-E/PL — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the PIC32MZ2048EFH144-E/PL when your design needs the largest available Flash (2 MB) + SRAM (512 KB) in the PIC32MZ EF family with full 144-pin I/O access, AEC-Q100 automotive screening, and a 144-LQFP that is hand-prototype friendly. Choose the PIC32MZ2048EFH144-I/PL if you do not need -40 to +125 C automotive temperature range - it costs less. Choose the PIC32MZ2048EFH144T-E/PL when you need tape-and-reel packaging for high-volume pick-and-place. Choose the smaller 100-pin PIC32MZ2048EFH100-I/PF or 64-pin PIC32MZ2048EFH064-I/PT for cost-down / smaller PCB designs, accepting that they need a board re-spin. Choose the PIC32MZ2048ECH100-I/PT only if you require on-chip hardware crypto acceleration - otherwise the EF variant is the better value.

대체품과의 비교

파라미터	이 제품	PIC32MZ2048EFH144T-E/PL	PIC32MZ2048EFH144-I/PL	PIC32MZ2048EFH100-I/PF	PIC32MZ2048EFH064-I/PT	PIC32MZ2048ECH100-I/PT
Brand	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology
Package	144-LQFP (PL) 20x20 mm	144-LQFP (PL) - same	144-LQFP (PL) - same	100-TQFP (PF) - DIFFERENT	64-TQFP (PT) - DIFFERENT	100-TQFP (PT) - DIFFERENT
Flash Memory	2 MB	2 MB	2 MB	2 MB	2 MB	2 MB
SRAM	512 KB	512 KB	512 KB	512 KB	512 KB	512 KB
Max CPU Speed	180 MHz (-E grade)	180 MHz	200 MHz	200 MHz	200 MHz	200 MHz
Temperature Range	-40 C to +125 C (-E automotive)	-40 C to +125 C (-E)	-40 C to +85 C (-I)	-40 C to +85 C (-I)	-40 C to +85 C (-I)	-40 C to +85 C (-I)
Hardware Crypto	No (EF = No Crypto)	No	No	No	No	Yes (EC = Crypto)
Approx Unit Price (1 pc)	USD 23.92 (LCSC, 2026-10-09)	USD 23-26	USD 21-24	USD 18-21	USD 14-17	USD 22-26

주요 차별점

Largest Flash + SRAM in a 144-LQFP PIC32 (vs PIC32MZ2048EFH100-I/PF)
Automotive AEC-Q100 + industrial -E temp grade (vs PIC32MZ2048EFH144-I/PL)
No-Crypto EF variant for cost-sensitive designs (vs PIC32MZ2048ECH100-I/PT)

설계 노트

The PIC32MZ2048EFH144-E/PL has multiple VDD and VSS pins (about 9 VDD + 8 VSS in 144-LQFP) that must each be decoupled individually. Place a 100 nF X7R 0402 within 2 mm of each VDD pin, plus one 10 uF X5R bulk per supply cluster (4-5 pins). Star-route all VDD/VSS back to a single ferrite-beaded node. Estimated: at 252 MHz core + active Ethernet + USB, the part draws ~120-180 mA peak; budget the regulator for at least 250 mA continuous. A 3.3 V LDO with 25 uVrms noise (e.g. NCP177AMX330TCG) avoids injecting ripple into the ADC references.

Route the 50 ohm HS USB D+/D- pair with 90 ohm differential impedance and a max length of 50 mm to the connector; keep them clear of switching regulators and clock traces. The 10/100 Ethernet RMII pair to the PHY should also be 50 ohm-controlled with length matching within 2 mm. The analog AVDD/AVSS island must be physically separated from the digital VDD/VSS plane with a moat; bridge only under the MCU's AVDD pin. Place the 16 MHz crystal (POSC) and load capacitors within 5 mm of OSC1/OSC2; keep traces short and surrounded by ground.

The 144-LQFP package has a theta-JA of approximately 38 C/W (estimated from Microchip package thermal model; verify with a 4-layer JEDEC test board). At maximum sustained current of 180 mA and 3.3 V core, dissipation is roughly 0.6 W - well within rated limits. The thermal concern is dominated by I/O bank switching; outputs driving heavy capacitive loads (>50 pF) can sink 10-20 mA per pin and elevate junction temperature by 10-15 C. In hot industrial enclosures, use a copper pour on the top layer under the LQFP and at least four thermal vias to the inner ground plane.

Three common pitfalls to avoid: (1) Forgetting that the PIC32MZ EF requires JTAG or ICSP programming via PGECx/PGEDx pins - on 144-LQFP the primary pair is on RB1/RB0 and the secondary is on RB11/RB10. (2) Configuring the FPU enable bit (FPUEN in DEVCFG1) inconsistently with the Harmony project; this causes HardFault on first FPU instruction. (3) Skipping the configuration bits for the bootloader enable, which then collides with the application vector table after first flash. Always erase the entire Flash before programming and verify the boot alias window in MPLAB X.

규정 준수 정보

RoHS

Compliant

REACH

Compliant

AEC-Q100

Qualified

무연

Yes

무할로겐

Unknown

분쟁 광물

Compliant

AEC-Q100 qualification confirmed via datasheets.com listing (updated 2024-10-20). RoHS/REACH compliance per Microchip product page. Halogen-free status not explicitly published; many recent Microchip LQFP parts are halogen-free but verify with the supplier. Conflict-minerals statement published by Microchip.

데이터 검증일: 2026-10-09 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

출처: Manufacturer Product Page, Distributor, Manufacturer Datasheet, Distributor, Distributor, Distributor, Octopart, Manufacturer Datasheet, Distributor, Manufacturer Product Page

PIC32MZ2048EFH144-E/PL - 32-Bit MCU, 2MB Flash, 144-LQFP | Microchip

PIC32MZ2048EFH144-E/PL 개요

이 시리즈의 변형

빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:

PIC32MZ2048EFH144T-E/PL

PIC32MZ2048EFH144-I/PL

PIC32MZ2048EFM144-E/MR

PIC32MZ2048EFH100-I/PF

PIC32MZ2048EFH064-I/PT

PIC32MZ2048ECH100-I/PT

추천 대체품 (동일 카테고리 & 패키지)

PIC32MZ2048EFH144-E/PL 핀 구성

일반적인 애플리케이션

추천 제품 요약

선택 가이드

대체품과의 비교

주요 차별점

설계 노트

규정 준수 정보

관련 검색

관련 부품 & 용어

고객이 함께 본 제품