R5F104JGAFA#30 32MHz 128KB 52-LQFP MCU | Renesas
Référence : R5F104JGAFA#30 ✓ ActifR5F104JGAFA#30 Présentation
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals on one chip. Within the embedded-control hierarchy, the R5F104JGAFA#30 belongs to the RL78/G14 family of 16-bit Flash microcontrollers. Such devices sit between general-purpose logic and dedicated application controllers: firmware provides flexibility, while the integrated MCU simplifies the control system compared with separate processor, memory, and support devices.
The headline characteristics are a 32 MHz maximum operating frequency, 128 KB of embedded Flash program memory, and a compact 52-LQFP package. The listed organization is 128K x 8, indicating byte-addressable Flash organization. The manufacturer identifies the device as a low-power, high-function general-purpose MCU suitable for motor control as well as industrial and metering equipment.
The RL78/G14 architecture targets embedded applications that benefit from 16-bit instruction handling and integrated embedded control. The 128 KB Flash capacity provides room for application code, parameter tables, calibration data, and firmware updates, while 32 MHz operation supports responsive control loops and communication handling. The 10 mm x 10 mm LQFP also exposes leads on all four sides, making it easier to inspect and rework than a fine-pitch land-grid-array package.
Typical uses include compact motor-control controllers, industrial measurement equipment, utility or consumption meters, and embedded control modules. In a motor-control design, the MCU can combine control logic with communication and analog signal conditioning. In metering equipment, the Flash space can retain calibration coefficients and measurement-processing firmware. For either use case, firmware partitioning and peripheral validation remain essential before production release.
Design around the 52-LQFP footprint, its exposed programming and programming-tool requirements, and the electrical limits in the manufacturer datasheet. Place decoupling capacitors close to the supply pins, keep high-current switching paths away from sensitive measurement inputs, and confirm oscillator and peripheral settings during firmware bring-up. Because the package lead count is 52, use the manufacturer pin-assignment table when assigning PCB nets.
This product record combines the manufacturer family description with distributor package and memory information, then adds application guidance, comparison parameters, and practical design notes. It also distinguishes confirmed sourcing facts from parameters that must still be checked against the device documentation before schematic release or firmware validation.
Alternatives de remplacement direct pour R5F104JGAFA#30 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
R5F104JGGFA#30
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
R5F104JGAFA#V0
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
R5F104JGAFB#30
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
R5F104JGAFD#30
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
R5F104JGAFE#30
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
R5F104JGAFA#30 Valeurs maximales et caractéristiques électriques
| Product Type | 16-bit Flash microcontroller |
| Series | RL78/G14 |
| Maximum CPU Frequency | 32 MHz |
| CPU Word Length | 16 bit |
| Flash Memory | 128 KB |
| Flash Organization | 128K x 8 |
| Boîtier | 52-LQFP (10 mm x 10 mm) |
| Type de montage | Surface mount |
| Lead Count | 52 pins |
| Primary Application | Motor control |
| Industrial Application | Industrial control and metering |
| Power Class | Low-power microcontroller |
| Plage de température de fonctionnement | -40 °C to +85 °C |
| Program Memory Type | Flash |
Guide de configuration des broches du R5F104JGAFA#30 52-lqfp (10 mm x 10 mm)
Configuration des broches du R5F104JGAFA#30 (boîtier 52-lqfp (10 mm x 10 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour R5F104JGAFA#30.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
R5F104JGAFA#30 convient pour 6 applications: Compact Motor-Control Controller, Industrial Measurement and Control, Smart Metering Equipment, Industrial Communication Gateway, Low-Power Embedded Control Module, Energy-Control Auxiliary Processor.
Compact Motor-Control Controller
The R5F104JGAFA#30 fits compact motor-control systems because its RL78/G14 core operates up to 32 MHz while the 128 KB Flash provides space for control algorithms, state machines, and diagnostic routines. The 52-LQFP package can reduce board area without relying on a very fine-pitch BGA. In an inverter or actuator controller, firmware can coordinate PWM generation, input capture, fault handling, and communications. Before schematic release, verify the required timer channels, comparator or ADC resources, pin multiplexing, motor-drive voltage limits, and thermal conditions in the manufacturer documentation.
Industrial Measurement and Control
The R5F104JGAFA#30 is appropriate for industrial measurement equipment that combines sensor conditioning, control logic, and local communications. Its 32 MHz 16-bit core supports responsive sampling and arithmetic, while 128 KB of Flash can retain application code, calibration tables, and configuration data. The compact 10 mm x 10 mm LQFP is useful where panel space is constrained but pin-based inspection and rework are valuable. Confirm ADC accuracy, timer resources, serial interfaces, supply range, and industrial temperature requirements before using it as the main controller.
Smart Metering Equipment
The R5F104JGAFA#30 is explicitly positioned for metering applications and offers 128 KB of Flash for measurement firmware, tariff logic, event logs, and calibration coefficients. Its 16-bit RL78/G14 architecture is suited to products that need deterministic embedded control without a higher-cost application processor. The 52-LQFP package supports compact meter-controller layouts with accessible leads. Validate ADC characteristics, low-power behavior, data-retention requirements, communications, metering accuracy, and the applicable regulatory test plan before production release.
Industrial Communication Gateway
A compact communications gateway can use the R5F104JGAFA#30 when the design needs deterministic 16-bit processing without a complex operating system. The 32 MHz core can handle protocol framing, local data transformation, and supervisory logic, while 128 KB of Flash provides useful code density for a focused embedded design. Its LQFP package also allows board-level inspection and rework. Select and configure the appropriate serial peripherals, oscillator, and supply circuitry according to the device documentation, and test throughput under worst-case message traffic.
Low-Power Embedded Control Module
The R5F104JGAFA#30 suits low-power embedded-control modules where a 16-bit MCU, Flash program memory, and compact package must coexist. The RL78/G14 family is designed around low-power operation, while the 128 KB memory capacity allows more local intelligence than a minimal peripheral controller. Designers can use the MCU for state management, sensor interpretation, and local overrides. Verify sleep modes, wake-up sources, oscillator behavior, and peripheral standby requirements in the manufacturer datasheet, then confirm the module's quiescent-current target during system-level testing.
Energy-Control Auxiliary Processor
The R5F104JGAFA#30 can serve as an auxiliary controller in energy-management equipment, coordinating discrete measurements, protection logic, and communication while a primary processor handles higher-level functions. Its 32 MHz RL78/G14 core provides enough responsiveness for supervisory loops, and the 128 KB Flash supports isolated firmware for protection, diagnostics, and data formatting. The 52-LQFP footprint is compact and inspectable. Confirm analog input performance, timer accuracy, communication interfaces, isolation boundaries, safety requirements, and firmware update strategy before using the MCU inside a protection path.
Données de référence d'ingénierie pour R5F104JGAFA#30 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | R5F104JGGFA#30 | R5F104JGAFA#V0 | R5F104JGAFB#30 | R5F104JGAFD#30 | R5F104JGAFE#30 |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 52-LQFP (10 mm x 10 mm) | 52-LQFP (10 mm x 10 mm) | 52-LQFP (10 mm x 10 mm) | 52-LQFP (10 mm x 10 mm) | 52-LQFP (10 mm x 10 mm) | 52-LQFP (10 mm x 10 mm) |
| Series | RL78/G14 | RL78/G14 | RL78/G14 | RL78/G14 | RL78/G14 | RL78/G14 |
| CPU Word Length | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
Principaux différenciateurs
- 32 MHz operation with 128 KB of embedded Flash (vs R5F104JGGFA#30)
- Explicit suitability for three embedded-control markets (vs R5F104JGAFA#V0)
- Inspectable 52-LQFP implementation (vs R5F104JGAFB#30)
Notes de conception
Assign the PCB netlist directly from the 52-LQFP pin-description table in the manufacturer datasheet. Place every supply decoupling capacitor at the associated device pin with a short, low-inductance path, and reserve separate routing space for programming signals, reset, clock sources, and analog inputs. Because no 52-pin library key is available for the generated package diagram, treat the package drawing as the controlling footprint reference and verify it mechanically before fabrication.
Separate switching-control signals from precision measurement and communication paths. Keep the MCU return currents close to their corresponding supply paths, avoid routing high-current motor or relay outputs beneath the device, and place external timing and interface components where their reference planes remain quiet. For designs using sensitive analog inputs, follow the datasheet guidance for grounding and bypass networks rather than generalizing from unrelated 52-LQFP devices.
Do not treat a shared package name as proof that every ordering suffix is automatically interchangeable. Before substituting an R5F104JGA-family MPN, compare pin functions, Flash organization, electrical limits, operating-temperature grade, peripheral availability, and qualification status in the Renesas ordering tables. Also verify that the programmed firmware remains compatible with the alternate device's memory map and peripheral configuration.
Informations de conformité
No specific compliance declarations for the exact R5F104JGAFA#30 ordering code were identified. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status in the manufacturer product documentation before release.