Skyworks Solutions

SI3050-E-FT - 3.3V Voice DAA | Skyworks Solutions Inc.

Référence : SI3050-E-FT ✓ Actif
3.3 V Vdss 20-pin TSSOP, 4.40 mm width Package
MOQ : 1 |

SI3050-E-FT Présentation

Skyworks Solutions Inc. SI3050-E-FT is a 3.3 V system-side Direct Access Arrangement voice DAA integrated circuit packaged in a 20-pin TSSOP. It provides the foreign exchange office analog interface for programmable voice systems and is intended for use with the Si3011, Si3018, or Si3019 companion transceivers. Its isolation-capacitor approach eliminates external isolation transformers, relays, and optoisolators from the line-interface design.

A Direct Access Arrangement, or DAA, is the integrated analog interface used at the system side of a voice connection. Within the broader hierarchy, a DAA is a telecom interface IC, a line-interface circuit, and a semiconductor. A system-side DAA converts the line-side voice signal into a digital representation for the voice-processing system while also supporting hook-state, ring, and line-control functions required by globally deployed analog telephone equipment.

The Si3050 family emphasizes programmable operation and global compliance. According to the manufacturer data sheet for Si3050 and Si3011/18/19, the chipset is designed to provide a programmable, globally compliant foreign exchange office interface. Silicon Laboratories' isolation-capacitor technology integrates the isolation function into the interface solution, reducing the number of discrete telephone-network protection components required around the voice line.

The SI3050-E-FT identifies revision E of the Si3050 in a 20-pin TSSOP tape-and-reel package. The related Si3011, Si3018, and Si3019 devices provide line-side interface functions for different international line arrangements. The Si3050 is programmed through a serial control interface, allowing the host controller to configure operating parameters and monitor line events. Firmware and register configuration should therefore be treated as part of the complete voice-system design rather than as a hardware-only implementation.

Typical applications include analog foreign exchange office platforms, Voice over Packet gateways, digital subscriber line equipment, PBX interfaces, voice adapters, and embedded telephony controllers. In these systems, the Si3050 handles the system-side analog interface while a companion Si3011, Si3018, or Si3019 supports the corresponding line-side interface. This division of responsibility enables one host processor to manage ringing, hook state, line feeding, and voice data transfer across multiple international markets.

Circuit design must preserve the Si3050 and companion line-side device as a validated chipset. Use the manufacturer's recommended external components, isolation network, clock configuration, and PCB layout because line-interface performance depends on the complete analog path rather than the IC alone. The TSSOP footprint also requires adequate copper and solder-joint inspection to avoid opens in fine-pitch leads during assembly or rework.

This page combines the verified 3.3 V, 20-pin TSSOP identity with engineering guidance covering companion-device selection, isolation-capacitor implementation, line-interface layout, and revision-aware sourcing. It also organizes drop-in family candidates and verified document locations so engineers can assess compatibility before committing a new voice-interface PCB design.

Alternatives de remplacement direct pour SI3050-E-FT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

SI3050-E1-FT

✅ Remplacement direct
📦 20-pin TSSOP
Revision identifier changes from E to E1; package and system-side DAA function remain the same, with a 0% package difference and an E-versus-E1 revision distinction

📋 Alternative de référence (hors catalogue)

SI3050-E1-GT

✅ Remplacement direct
📦 20-pin TSSOP
Revision or ordering identifier changes from E-FT to E1-GT; package is unchanged, while the E1 and G revision-status differences require register review

📋 Alternative de référence (hors catalogue)

SI3050-E1-FTR

✅ Remplacement direct
📦 20-pin TSSOP
Revision changes from E to E1 and the ordering suffix changes from FT to FTR; the 20-pin TSSOP footprint remains unchanged and the electrical difference is revision-dependent

📋 Alternative de référence (hors catalogue)

SI3050-E1-GTR

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 20-pin TSSOP
Revision or ordering identifier changes from E-FT to E1-GTR; package is unchanged, while revision status and temperature or packing code require comparison

📋 Alternative de référence (hors catalogue)

SI3050-E1-FMR

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 20-pin TSSOP
Revision changes from E to E1 and the ordering suffix changes from FT to FMR; package remains identical while revision and ordering characteristics differ

📋 Alternative de référence (hors catalogue)

SI3050-E-FT Spécifications

Product Type System-side Direct Access Arrangement (DAA) voice interface IC
Tension d'alimentation 3.3 V
Boîtier 20-pin TSSOP, 4.40 mm width
Device Revision Revision E
Interface Class Foreign exchange office (FXO) analog interface
Isolation Technology Integrated isolation-capacitor technology
External Isolation Transformer Not required by the chipset architecture
External Isolation Relay Not required by the chipset architecture
External Optoisolator Not required by the chipset architecture
Compatible Companion Family Si3011, Si3018, and Si3019 line-side devices
Lead-Free Status Lead-free
Type de montage Surface mount
Shipping Format Tape and reel

Guide de configuration des broches du SI3050-E-FT 20-pin tssop, 4.40 mm width

Configuration des broches du SI3050-E-FT (boîtier 20-pin tssop, 4.40 mm width). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 20-pin tssop, 4.40 mm width pour le SI3050-E-FT

Aucune donnée de brochage détaillée disponible pour SI3050-E-FT.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

SI3050-E-FT convient pour 6 applications: Voice over Packet Gateway, Foreign Exchange Office Platform, PBX Line Interface Card, Digital Subscriber Line Equipment, Embedded Telephony Adapter, Industrial Voice Communication Terminal.

🌐

Voice over Packet Gateway

The SI3050-E-FT fits the system-side foreign exchange office interface of a Voice over Packet gateway because the Si3050 chipset provides a programmable 3.3 V DAA function in a 20-pin TSSOP. It works with an Si3011, Si3018, or Si3019 line-side device, allowing the gateway to support different international line arrangements. According to the manufacturer chipset description, integrated isolation-capacitor technology removes external isolation transformers, relays, and optoisolators. Designers should still implement the prescribed external line network and validate regional line parameters before deployment.

🏭

Foreign Exchange Office Platform

The SI3050-E-FT is designed for system-side analog line termination in a foreign exchange office platform where multiple international voice interfaces may be required. Its programmable Si3050 architecture allows a host controller to manage line behavior through registers, while the appropriate Si3011, Si3018, or Si3019 device handles the corresponding line side. The 3.3 V TSSOP implementation supports compact multi-channel designs while avoiding discrete isolation-transformer hardware. Firmware, calibration, and country-specific line settings should be validated together rather than treated as interchangeable across markets.

📞

PBX Line Interface Card

A private branch exchange line card can use the SI3050-E-FT to implement the 3.3 V system-side voice DAA in a compact 20-pin TSSOP footprint. The device works with the Si3011, Si3018, or Si3019 family to provide the system-side and line-side portions of an analog FXO interface. Its isolation-capacitor architecture reduces the mechanical and board area normally occupied by an isolation transformer, relay, or optoisolator. Dense PBX cards still require careful grounding, isolation-network layout, thermal review, and production testing of every supported line configuration.

🌐

Digital Subscriber Line Equipment

The SI3050-E-FT can support analog voice termination in DSL equipment that requires a foreign exchange office interface alongside broadband data circuitry. Its system-side DAA role and 3.3 V operation align with the Si3050 chipset architecture, while Si3011, Si3018, or Si3019 supplies the required line-side counterpart. Integrated isolation-capacitor technology simplifies the voice path by eliminating external isolation transformers, relays, and optoisolators. The line network must still follow the manufacturer reference design to preserve isolation, impedance, and regional regulatory performance.

🔧

Embedded Telephony Adapter

The SI3050-E-FT is appropriate for an embedded telephony adapter that connects a digital host processor to an analog telephone line. The 20-pin TSSOP package limits board area, and the Si3050 chipset provides programmable system-side DAA behavior without the space and component count of a discrete isolation-transformer implementation. A matching Si3011, Si3018, or Si3019 defines the line-side characteristics for the target country. The host firmware must configure the device correctly and account for line states, ring detection, and revision-specific register behavior.

🏭

Industrial Voice Communication Terminal

The SI3050-E-FT can be used in industrial voice terminals that require an analog FXO connection to legacy telephone infrastructure. The system-side DAA operates at 3.3 V and shares the same 20-pin TSSOP package family as the identified revision alternatives, facilitating controlled redesigns. The integrated isolation-capacitor architecture eliminates external isolation transformers, relays, and optoisolators, which can improve board-space efficiency. Because an industrial terminal may face varied line conditions andEMC environments, use the prescribed protection network and verify line-interface performance during production qualification.

Récapitulatif des produits recommandés

SI3011 Si3050-compatible line-side voice DAA companion Utilisé dans : Voice over Packet Gateway, Foreign Exchange Office Platform, PBX Line Interface Card, Digital Subscriber Line Equipment, Embedded Telephony Adapter, Industrial Voice Communication Terminal SI3018 Si3050-compatible line-side voice DAA companion Utilisé dans : Voice over Packet Gateway, Foreign Exchange Office Platform, PBX Line Interface Card, Digital Subscriber Line Equipment, Embedded Telephony Adapter, Industrial Voice Communication Terminal SI3019 Si3050-compatible line-side voice DAA companion Utilisé dans : Voice over Packet Gateway, Foreign Exchange Office Platform, PBX Line Interface Card, Digital Subscriber Line Equipment, Embedded Telephony Adapter, Industrial Voice Communication Terminal
What is the SI3050-E-FT?
The SI3050-E-FT is a 3.3 V system-side Direct Access Arrangement voice interface IC in a 20-pin TSSOP package. According to the Skyworks Si3050 and Si3011/18/19 manufacturer data sheet, it forms the system-side portion of a programmable voice DAA chipset for foreign exchange office interfaces. It is intended to work with an Si3011, Si3018, or Si3019 line-side companion device.
Where can I download the SI3050-E-FT datasheet PDF?
The SI3050-E-FT datasheet is available through the Skyworks PDF link for the Si3050, Si3011, Si3018, and Si3019 voice DAA solutions. The document covers the chipset architecture, register revision identification, programming, line interface, and application requirements. Use the pin-description and application tables in that manufacturer data sheet when assigning PCB signals and selecting external components.
Where can I find the SI3050-E-FT pinout?
The SI3050-E-FT pin assignment is published in the manufacturer data sheet for the Si3050 and Si3011/18/19 chipset. The device uses a 20-pin TSSOP package, but a complete numbered pin list is not reproduced here. Use the data sheet's pin-description table when assigning VDD, ground, clock, control, and line-interface connections on the PCB.
Which companion ICs are used with the SI3050-E-FT?
The SI3050-E-FT is designed for use with the Si3011, Si3018, or Si3019 line-side voice DAA devices. According to the manufacturer data sheet, these combinations provide a programmable global FXO interface solution. The appropriate companion device depends on the target country's line arrangement and regulatory requirements, so the line-side selection should be validated as part of the complete product design.
What are the key specifications of SI3050-E-FT that engineers should know?
The SI3050-E-FT is identified as a 3.3 V, 20-pin TSSOP system-side voice DAA based on revision E. The Skyworks manufacturer data sheet describes the Si3050 as part of a programmable Si3050 with Si3011/18/19 chipset and identifies revision E through the REVA[3:0] register bits. Detailed operating limits and timing values should be taken directly from the manufacturer data sheet.
Does the SI3050-E-FT replace an isolation transformer?
Yes, the Si3050 chipset architecture is designed to eliminate the need for a costly isolation transformer in the voice-line interface. According to the Skyworks manufacturer data sheet, Silicon Laboratories' isolation-capacitor technology provides that isolation function. The complete line network still requires the specified external protection, impedance, and line-network components specified by the manufacturer.
What is the difference between SI3050-E-FT and SI3050-E1-FT?
The SI3050-E-FT and SI3050-E1-FT are related Si3050 voice DAA variants offered in the same 20-pin TSSOP format, but the E and E1 identifiers distinguish device revisions or ordering configurations. The available comparison data confirms both use the voice DAA system-side function, while a full register and electrical comparison must be checked in the manufacturer data sheet before substituting one for the other.
Is the SI3050-E-FT suitable for Voice over Packet gateways?
Yes, the SI3050-E-FT is suitable for the analog line-interface section of Voice over Packet equipment that uses a foreign exchange office interface. Its 3.3 V operation and integration with Si3011, Si3018, or Si3019 line-side devices provide a programmable bridge between the telephone line and digital voice-processing electronics. Regional line standards and the selected companion device must match the deployment market.
When should I choose SI3050-E-FT over another Si3050 revision?
Choose SI3050-E-FT when the product design requires revision E of the Si3050 system-side DAA in the specified 20-pin TSSOP configuration. A different Si3050 revision should be selected only when its data sheet confirms equivalent pin assignment, register behavior, electrical limits, companion-device compatibility, and lifecycle requirements. Revision changes can affect firmware and line-interface qualification even when the package remains the same.
What is the best drop-in replacement for SI3050-E-FT?
The closest drop-in candidates are revision and ordering variants in the same Si3050 family that retain the 20-pin TSSOP footprint. SI3050-E1-FT is the closest identified alternative because it changes the revision identifier while retaining the system-side voice DAA function and package. Confirm register compatibility, temperature grade, companion Si3011/18/19 support, and production configuration before treating it as an unqualified drop-in replacement.
Can SI3050-E1-FT replace SI3050-E-FT without a PCB change?
SI3050-E1-FT can retain the same 20-pin TSSOP PCB footprint, but a footprint match alone does not establish a functional drop-in replacement. The available product records identify both devices as Si3050 system-side voice DAA parts. Before replacement, compare revision-specific registers, electrical limits, line-interface behavior, firmware support, and companion-device requirements against the manufacturer data sheet.
Where can I buy SI3050-E-FT online?
Use the Request a Quote form on this page to request the current SI3050-E-FT quotation, stock position, lead time, and minimum order quantity. The form provides a direct engineering purchasing channel without relying on static prices that may change. Include the required package, revision, quantity, and production schedule so the quote can be matched to the exact 20-pin TSSOP device.
What is the price of SI3050-E-FT?
The current SI3050-E-FT price is not displayed as a fixed value on this page because quotation-based inventory and market conditions can change. Use the Request a Quote form on this page for a current price, available quantity, and lead time. Specify the exact MPN, 20-pin TSSOP tape-and-reel format, and required order quantity to receive an actionable quote.
Is SI3050-E-FT in stock and what is its lead time?
Current SI3050-E-FT stock and lead time should be confirmed through the Request a Quote form on this page. The verified distributor records show that this family has been actively offered, but they do not establish a guaranteed allocation for every order quantity. Submit the required quantity, production date, and reel or tray preference for a current availability response.
Is SI3050-E-FT RoHS and REACH compliant?
The available product record identifies the SI3050-E-FT as lead-free, but a definitive RoHS or REACH declaration is not stated in the product information. Request the current manufacturer environmental compliance declaration for the exact orderable MPN. Treat RoHS and REACH as unknown until that declaration or the corresponding manufacturer material is reviewed.
What are the main design considerations for a SI3050-E-FT voice interface PCB?
Follow the manufacturer's recommended external network, isolation-capacitor implementation, component values, and layout for the selected Si3011, Si3018, or Si3019 companion. The 20-pin TSSOP footprint requires reliable escape routing and solder-joint inspection, particularly during rework. Keep the analog line path away from high-current switching nodes and preserve the data sheet's component placement and grounding requirements.

Données de référence d'ingénierie pour SI3050-E-FT — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the SI3050-E-FT when a new design specifically requires revision E of the Si3050 system-side voice DAA in a 20-pin TSSOP package and has been validated with an Si3011, Si3018, or Si3019 companion. The E designation matters: a footprint-compatible Si3050-E1 variant may use revised hardware or register behavior that requires different firmware and production testing. Select SI3050-E1-FT only when the manufacturer confirms that revision and the complete line-interface requirements are equivalent to the E revision. Consider E1-G, E1-FTR, E1-GTR, or E1-FMR alternatives when their revision status, temperature range, packing configuration, and companion-device support satisfy the product requirements. For a global product, determine the required country-specific line-side companion before finalizing either side of the chipset. Avoid choosing on package similarity alone; regional compliance, firmware, external line network, and production lifecycle qualification are decisive.

Comparaison avec les alternatives

Paramètre Ce produit SI3050-E1-FT SI3050-E1-GT SI3050-E1-FTR SI3050-E1-GTR SI3050-E1-FMR
Package 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP
Brand Skyworks Solutions Inc. Skyworks Solutions Inc. Skyworks Solutions Inc. Skyworks Solutions Inc. Skyworks Solutions Inc. Skyworks Solutions Inc.
Device Revision Revision E E1 revision E1 revision with G status code E1 revision E1 revision with G status code E1 revision

Principaux différenciateurs

  • Direct revision match with the documented E-series ordering identity (vs SI3050-E1-FT)
  • Compact 20-pin TSSOP implementation (vs SI3050-E1-GT)
  • System-side role with an established Si3011/18/19 companion ecosystem (vs SI3050-E1-FTR)

Notes de conception

Implement the PCB with the manufacturer's recommended Si3050 and companion Si3011/18/19 reference layout. Preserve the relative placement of the isolation-capacitor network, line components, bypass capacitors, clock components, and ground returns. Keep the analog telephone-line region separated from switching converters and high-speed digital signals, and route the complete approved network rather than substituting individual components without revalidation.

Treat the 20-pin TSSOP footprint as a fine-pitch assembly constraint. Apply manufacturer land-pattern guidance, maintain solder-mask and paste consistency, and plan inspection points for each lead. Rework should use controlled temperature profiles because bridged or lifted TSSOP leads can create intermittent line faults that are difficult to diagnose in production voice equipment.

Do not select a Si3050 variant from the package suffix alone. Compare the exact revision identifier, companion Si3011, Si3018, or Si3019 device, register map, electrical limits, temperature grade, and intended shipping format. The E, E1, and related G-status variants share the 20-pin TSSOP family, but revision-specific firmware and register behavior must be checked before substitution.

Follow the manufacturer clock and grounding requirements for the digital control path between the Si3050-E-FT and host controller. Keep clock traces short, provide the prescribed bypass capacitance, and return high-current digital and line-network currents without sharing narrow paths with sensitive analog nodes. Validate timing and line-signal integrity on the final multilayer PCB because enclosure, cables, and external network impedance affect system performance.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Yes
Sans halogène
Unknown
Minerais de conflit
Unknown

The verified Mouser record identifies the SI3050-E-FT as lead-free. Specific RoHS, REACH, halogen-free, and conflict-minerals declarations were not identified in the available product information. AEC-Q100 is not applicable to this telecom interface IC based on its stated product category.

Données vérifiées le : 2026-11-20 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

si3050 e1 ftr si3050 e1 gtr si3050 e1 fmr skyworks si3050 SI3050-E-FT datasheet SI3050-E-FT datasheet pdf SI3050-E-FT pinout SI3050-E-FT replacement SI3050-E-FT equivalent SI3050-E-FT vs SI3050-E1-FT SI3050-E-FT footprint SI3050-E-FT price SI3050-E-FT stock SI3050 3.3V voice DAA SI3050 TSSOP-20 pinout

Composants & termes associés

Skyworks Solutions Inc. SI3050-E-FT SI3050-E1-FT SI3050-E1-GT SI3050-E1-FTR SI3050-E1-GTR SI3050-E1-FMR SI3011 SI3018 SI3019 Direct Access Arrangement DAA Voice DAA system-side DAA line-side DAA foreign exchange office FXO telecom interface IC interface IC semiconductor isolation-capacitor technology programmable voice chipset TSSOP-20 TSSOP family surface-mount package SMD
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ