SI3050-E-FT - 3.3V Voice DAA | Skyworks Solutions Inc.
部品番号: SI3050-E-FT ✓ 生産中SI3050-E-FT 概要
A Direct Access Arrangement, or DAA, is the integrated analog interface used at the system side of a voice connection. Within the broader hierarchy, a DAA is a telecom interface IC, a line-interface circuit, and a semiconductor. A system-side DAA converts the line-side voice signal into a digital representation for the voice-processing system while also supporting hook-state, ring, and line-control functions required by globally deployed analog telephone equipment.
The Si3050 family emphasizes programmable operation and global compliance. According to the manufacturer data sheet for Si3050 and Si3011/18/19, the chipset is designed to provide a programmable, globally compliant foreign exchange office interface. Silicon Laboratories' isolation-capacitor technology integrates the isolation function into the interface solution, reducing the number of discrete telephone-network protection components required around the voice line.
The SI3050-E-FT identifies revision E of the Si3050 in a 20-pin TSSOP tape-and-reel package. The related Si3011, Si3018, and Si3019 devices provide line-side interface functions for different international line arrangements. The Si3050 is programmed through a serial control interface, allowing the host controller to configure operating parameters and monitor line events. Firmware and register configuration should therefore be treated as part of the complete voice-system design rather than as a hardware-only implementation.
Typical applications include analog foreign exchange office platforms, Voice over Packet gateways, digital subscriber line equipment, PBX interfaces, voice adapters, and embedded telephony controllers. In these systems, the Si3050 handles the system-side analog interface while a companion Si3011, Si3018, or Si3019 supports the corresponding line-side interface. This division of responsibility enables one host processor to manage ringing, hook state, line feeding, and voice data transfer across multiple international markets.
Circuit design must preserve the Si3050 and companion line-side device as a validated chipset. Use the manufacturer's recommended external components, isolation network, clock configuration, and PCB layout because line-interface performance depends on the complete analog path rather than the IC alone. The TSSOP footprint also requires adequate copper and solder-joint inspection to avoid opens in fine-pitch leads during assembly or rework.
This page combines the verified 3.3 V, 20-pin TSSOP identity with engineering guidance covering companion-device selection, isolation-capacitor implementation, line-interface layout, and revision-aware sourcing. It also organizes drop-in family candidates and verified document locations so engineers can assess compatibility before committing a new voice-interface PCB design.
ドロップイン代替品: SI3050-E-FT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
SI3050-E1-FT
✅ ドロップイン📋 参考代替品(カタログ未掲載)
SI3050-E1-GT
✅ ドロップイン📋 参考代替品(カタログ未掲載)
SI3050-E1-FTR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
SI3050-E1-GTR
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
SI3050-E1-FMR
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
SI3050-E-FT 仕様
| Product Type | System-side Direct Access Arrangement (DAA) voice interface IC |
| 電源電圧 | 3.3 V |
| パッケージ | 20-pin TSSOP, 4.40 mm width |
| Device Revision | Revision E |
| Interface Class | Foreign exchange office (FXO) analog interface |
| Isolation Technology | Integrated isolation-capacitor technology |
| External Isolation Transformer | Not required by the chipset architecture |
| External Isolation Relay | Not required by the chipset architecture |
| External Optoisolator | Not required by the chipset architecture |
| Compatible Companion Family | Si3011, Si3018, and Si3019 line-side devices |
| Lead-Free Status | Lead-free |
| 実装タイプ | Surface mount |
| Shipping Format | Tape and reel |
SI3050-E-FT 20-pin tssop, 4.40 mm width ピン配置ガイド
SI3050-E-FT (20-pin tssop, 4.40 mm width パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: SI3050-E-FT.
詳細は データシート をご参照ください。
主な用途
SI3050-E-FT の用途: 6 件s: Voice over Packet Gateway, Foreign Exchange Office Platform, PBX Line Interface Card, Digital Subscriber Line Equipment, Embedded Telephony Adapter, Industrial Voice Communication Terminal.
Voice over Packet Gateway
The SI3050-E-FT fits the system-side foreign exchange office interface of a Voice over Packet gateway because the Si3050 chipset provides a programmable 3.3 V DAA function in a 20-pin TSSOP. It works with an Si3011, Si3018, or Si3019 line-side device, allowing the gateway to support different international line arrangements. According to the manufacturer chipset description, integrated isolation-capacitor technology removes external isolation transformers, relays, and optoisolators. Designers should still implement the prescribed external line network and validate regional line parameters before deployment.
おすすめ
Foreign Exchange Office Platform
The SI3050-E-FT is designed for system-side analog line termination in a foreign exchange office platform where multiple international voice interfaces may be required. Its programmable Si3050 architecture allows a host controller to manage line behavior through registers, while the appropriate Si3011, Si3018, or Si3019 device handles the corresponding line side. The 3.3 V TSSOP implementation supports compact multi-channel designs while avoiding discrete isolation-transformer hardware. Firmware, calibration, and country-specific line settings should be validated together rather than treated as interchangeable across markets.
おすすめ
PBX Line Interface Card
A private branch exchange line card can use the SI3050-E-FT to implement the 3.3 V system-side voice DAA in a compact 20-pin TSSOP footprint. The device works with the Si3011, Si3018, or Si3019 family to provide the system-side and line-side portions of an analog FXO interface. Its isolation-capacitor architecture reduces the mechanical and board area normally occupied by an isolation transformer, relay, or optoisolator. Dense PBX cards still require careful grounding, isolation-network layout, thermal review, and production testing of every supported line configuration.
おすすめ
Digital Subscriber Line Equipment
The SI3050-E-FT can support analog voice termination in DSL equipment that requires a foreign exchange office interface alongside broadband data circuitry. Its system-side DAA role and 3.3 V operation align with the Si3050 chipset architecture, while Si3011, Si3018, or Si3019 supplies the required line-side counterpart. Integrated isolation-capacitor technology simplifies the voice path by eliminating external isolation transformers, relays, and optoisolators. The line network must still follow the manufacturer reference design to preserve isolation, impedance, and regional regulatory performance.
おすすめ
Embedded Telephony Adapter
The SI3050-E-FT is appropriate for an embedded telephony adapter that connects a digital host processor to an analog telephone line. The 20-pin TSSOP package limits board area, and the Si3050 chipset provides programmable system-side DAA behavior without the space and component count of a discrete isolation-transformer implementation. A matching Si3011, Si3018, or Si3019 defines the line-side characteristics for the target country. The host firmware must configure the device correctly and account for line states, ring detection, and revision-specific register behavior.
おすすめ
Industrial Voice Communication Terminal
The SI3050-E-FT can be used in industrial voice terminals that require an analog FXO connection to legacy telephone infrastructure. The system-side DAA operates at 3.3 V and shares the same 20-pin TSSOP package family as the identified revision alternatives, facilitating controlled redesigns. The integrated isolation-capacitor architecture eliminates external isolation transformers, relays, and optoisolators, which can improve board-space efficiency. Because an industrial terminal may face varied line conditions andEMC environments, use the prescribed protection network and verify line-interface performance during production qualification.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: SI3050-E-FT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | SI3050-E1-FT | SI3050-E1-GT | SI3050-E1-FTR | SI3050-E1-GTR | SI3050-E1-FMR |
|---|---|---|---|---|---|---|
| Package | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP |
| Brand | Skyworks Solutions Inc. | Skyworks Solutions Inc. | Skyworks Solutions Inc. | Skyworks Solutions Inc. | Skyworks Solutions Inc. | Skyworks Solutions Inc. |
| Device Revision | Revision E | E1 revision | E1 revision with G status code | E1 revision | E1 revision with G status code | E1 revision |
主な差別化要因
- Direct revision match with the documented E-series ordering identity (vs SI3050-E1-FT)
- Compact 20-pin TSSOP implementation (vs SI3050-E1-GT)
- System-side role with an established Si3011/18/19 companion ecosystem (vs SI3050-E1-FTR)
設計ノート
Implement the PCB with the manufacturer's recommended Si3050 and companion Si3011/18/19 reference layout. Preserve the relative placement of the isolation-capacitor network, line components, bypass capacitors, clock components, and ground returns. Keep the analog telephone-line region separated from switching converters and high-speed digital signals, and route the complete approved network rather than substituting individual components without revalidation.
Treat the 20-pin TSSOP footprint as a fine-pitch assembly constraint. Apply manufacturer land-pattern guidance, maintain solder-mask and paste consistency, and plan inspection points for each lead. Rework should use controlled temperature profiles because bridged or lifted TSSOP leads can create intermittent line faults that are difficult to diagnose in production voice equipment.
Do not select a Si3050 variant from the package suffix alone. Compare the exact revision identifier, companion Si3011, Si3018, or Si3019 device, register map, electrical limits, temperature grade, and intended shipping format. The E, E1, and related G-status variants share the 20-pin TSSOP family, but revision-specific firmware and register behavior must be checked before substitution.
Follow the manufacturer clock and grounding requirements for the digital control path between the Si3050-E-FT and host controller. Keep clock traces short, provide the prescribed bypass capacitance, and return high-current digital and line-network currents without sharing narrow paths with sensitive analog nodes. Validate timing and line-signal integrity on the final multilayer PCB because enclosure, cables, and external network impedance affect system performance.
コンプライアンス情報
The verified Mouser record identifies the SI3050-E-FT as lead-free. Specific RoHS, REACH, halogen-free, and conflict-minerals declarations were not identified in the available product information. AEC-Q100 is not applicable to this telecom interface IC based on its stated product category.