Texas Instruments

SN74HC365D - 6-Bit 3-State Buffer | Texas Instruments

Référence : SN74HC365D ✓ Actif
2 V to 6 V Vdss 16-SOIC Package
MOQ : 1 |

SN74HC365D Présentation

The Texas Instruments SN74HC365D is a six-channel non-inverting buffer and line driver with independently controlled 3-state outputs, a 2 V to 6 V operating supply range, and a 16-pin SOIC package. It provides six dedicated data inputs, two shared output-enable inputs, and six non-inverting outputs. All six channels enter the high-impedance state when either output-enable input is high.

A hex buffer and line driver is a digital logic IC that strengthens signals for transmission between circuit sections or loads. The 74HC365 belongs to the high-speed CMOS logic family, which combines low static power consumption with CMOS-compatible input thresholds. Its buffer function preserves logic polarity while increasing drive capability for bus-oriented receivers, memory address drivers, and clock-distribution networks. The 3-state outputs allow multiple devices to share a bus without creating contention when a driver is disabled.

The SN74HC365D is identified as a non-inverting one-element, six-bit-per-element buffer with 3-state outputs in a 16-SOIC package. Its two output-enable inputs provide a common way to place all six outputs into high impedance, which simplifies shared-bus control. Because the enable inputs use overbar notation in the device description, their active state is low: pulling either enable input low permits normal output operation, while driving either input high disables the outputs.

Texas Instruments positions the SN74HC365 for memory-address driving, clock driving, bus-oriented receivers, and transmitters. The six channels operate from the same supply, allowing a complete six-bit section of a bus to be enabled or disabled together. The HC-series 2 V to 6 V supply range supports 5 V systems as well as compatible lower-voltage CMOS logic environments. Exact propagation-delay, output-current, and absolute-maximum ratings should be taken from the manufacturer datasheet for the specific revision and operating conditions.

Typical uses include microprocessor and microcontroller bus buffering, memory address-line isolation, clock fan-out, test-equipment interface isolation, and control systems where several data lines must connect conditionally to a shared resource. Two enable inputs provide bus-level arbitration without requiring individual gate control for every channel. The non-inverting configuration avoids inversion, making it suitable where source and destination logic use the same active-high or active-low interpretation.

PCB layout should place the device close to the source of the buffered signals and provide a short, low-inductance return path for every supply connection. Decoupling should follow the manufacturer recommendations, and unused inputs must not be left floating. Because the outputs can enter a high-impedance state, verify that downstream receivers tolerate the resulting bus level and that enable control remains stable during mode transitions.

This page combines manufacturer functional information, package details, sourcing context, pin-compatible alternatives, application guidance, and design checks in one engineering-focused reference. It is intended to accelerate schematic review and PCB replacement decisions while keeping the final design anchored to the official SN74HC365 documentation.

Alternatives de remplacement direct pour SN74HC365D — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

CD74HC365M

✅ Remplacement direct
📦 16-SOIC
Same TI 74HC365 six-channel 3-state architecture and 16-SOIC package; timing, temperature, and output-current limits require comparison.

📋 Alternative de référence (hors catalogue)

74HC365D,653

✅ Remplacement direct
📦 16-SOIC
Same six-channel non-inverting 3-state buffer family and 16-SO package; manufacturer-specific timing and ratings require comparison.

📋 Alternative de référence (hors catalogue)

MC74HC365ADG

✅ Remplacement direct
📦 16-SOIC
Same 74HC365 six-buffer 3-state function in a 16-SO package; operating limits and propagation timing require comparison.

📋 Alternative de référence (hors catalogue)

74HCT365D

✅ Remplacement direct
📦 16-SOIC
Same 74x365 six-channel 3-state topology and 16-SO package, but TTL-compatible input thresholds alter interface compatibility.

📋 Alternative de référence (hors catalogue)

74LVC365AD

✅ Remplacement direct
📦 16-SOIC
Same six-channel 3-state buffer function in a 16-SO package, but the lower-voltage LVC family changes supply and input-threshold behavior.

📋 Alternative de référence (hors catalogue)

SN74HC365D Valeurs maximales et caractéristiques électriques

Product Type Hex non-inverting buffer/line driver
Number of Elements 1 element
Bits per Element 6 bits
Number of Channels 6 channels
Type de sortie 3-state non-inverting output
Supply Voltage Range 2 V to 6 V
Output Enable Inputs 2 shared inputs
Disabled Output State High impedance when either output-enable input is high
Boîtier 16-SOIC
Type de montage Surface mount
Logic Family 74HC CMOS
Input Logic Level CMOS-compatible

Guide de configuration des broches du SN74HC365D 16-soic

Configuration des broches du SN74HC365D (boîtier 16-soic). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 16-soic pour le SN74HC365D

Aucune donnée de brochage détaillée disponible pour SN74HC365D.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

SN74HC365D convient pour 6 applications: Memory Address-Line Buffering, Clock Distribution and Fan-Out, Microprocessor Bus Isolation, Test and Measurement Interface Isolation, Embedded Control Data Fan-Out, Shared Peripheral Bus Isolation.

🖥️

Memory Address-Line Buffering

The SN74HC365D is suitable for buffering six memory-address lines because it provides six non-inverting channels while allowing the complete address group to be disconnected when the bus is not owned. Texas Instruments identifies memory-address drivers as a primary use for the 74HC365 family. Its two shared output-enable inputs can place all six outputs in high impedance, reducing contention during memory-bus handshakes. The 2 V to 6 V supply range supports 5 V systems and compatible lower-voltage CMOS designs. During schematic review, confirm propagation delay and output-current limits against the system clock and load capacitance because these figures depend on supply voltage and operating conditions.

🌐

Clock Distribution and Fan-Out

The six-channel SN74HC365D can distribute one clock to several destinations while preserving polarity and adding buffering between the source and loads. Its independent data inputs permit multiple clock or control signals to be routed through one package, and the shared tri-state control can isolate the entire group from a shared line. The manufacturer identifies clock drivers as a target application. Keep trace lengths and return paths controlled so clock edges remain clean at the receiver, and verify the worst-case propagation delay from the datasheet when the clock period is short. The 16-SOIC format also allows compact placement near the driven logic.

🏭

Microprocessor Bus Isolation

The SN74HC365D fits bus-isolation points where six processor or peripheral lines must drive shared circuitry only during a defined ownership interval. The non-inverting buffers retain the original logic state, while the two output-enable inputs provide a common way to release all six outputs. This arrangement helps prevent bus contention in systems that combine a processor, memory, and peripheral devices. Texas Instruments specifically describes the family for bus-oriented receivers and transmitters. The design should define enable timing with the bus controller and confirm that downstream receivers maintain valid levels during high-impedance intervals. Supply decoupling and short ground returns are essential for clean switching behavior.

🔧

Test and Measurement Interface Isolation

The SN74HC365D can buffer six instrumentation signals between a test fixture and a shared measurement or switching network. Buffering reduces loading on the originating circuit, and the 3-state outputs allow the fixture to release the lines when another instrument or termination must take control. The six non-inverting channels make it suitable for parallel status, control, or address lines rather than differential high-speed signals. Because the device operates from 2 V to 6 V, select interface levels that remain within the family limits and validate propagation delay for the measurement timing budget. High-impedance behavior must be considered by the receiving circuitry, which should not depend on the disabled driver maintaining a defined voltage.

📱

Embedded Control Data Fan-Out

The SN74HC365D can distribute six control or status lines from an embedded controller to distant modules while preserving logic polarity and strengthening the source outputs. The 16-SOIC package is convenient for routing across a compact control board, and the 2 V to 6 V operating range supports compatible embedded logic rails. When several modules share a communication line, the common output-enable function can disconnect the SN74HC365D group while another buffer owns the bus. Design the firmware or hardware arbiter to avoid overlapping enable windows, and check timing at the slowest specified supply voltage if the controller relies on a fixed setup or hold margin.

🧩

Shared Peripheral Bus Isolation

The SN74HC365D is appropriate for placing a six-line peripheral group behind a tri-state interface on a shared bus. High impedance releases the peripheral segment when it is not selected, while the non-inverting channels preserve the command and status logic presented to the active controller. The dual output-enable arrangement provides a common disable mechanism for all six lines, reducing the number of control signals required on a crowded board. Texas Instruments identifies bus-oriented receivers and transmitters as intended uses. The implementation must ensure only one driver enables at a time, provide a defined state for the shared bus when every driver is disabled, and validate propagation delay against the peripheral interface timing.

What is the SN74HC365D and what does it do?
The SN74HC365D is a six-channel, non-inverting 3-state buffer and line driver operating from 2 V to 6 V. According to the Texas Instruments SN74HC365 product page and datasheet, it contains six independent buffers, and all channels enter the high-impedance state when either output-enable input is high. The device is intended to improve drive for memory-address lines, clock lines, bus receivers, and transmitters.
How many channels and output-enable inputs does the SN74HC365D have?
The SN74HC365D provides six independent non-inverting channels and two output-enable inputs. Texas Instruments describes the device as a one-element, six-bit-per-element buffer with 3-state outputs. The enable controls are shared rather than individual per channel: when either overbar-marked enable input is high, all six outputs are placed in the high-impedance state, allowing the connected bus to be released.
What is the operating voltage range of the SN74HC365D?
The SN74HC365D operates from 2 V to 6 V. This range is explicitly listed on the Texas Instruments product page for the SN74HC365 family and supports both 5 V HC-series systems and compatible lower-voltage CMOS environments. The actual timing and output-current limits can change with supply voltage, so use the manufacturer datasheet limits corresponding to the selected operating condition.
What package does the SN74HC365D use?
The SN74HC365D is packaged in a 16-pin small-outline integrated-circuit package identified as 16-SOIC. Texas Instruments and distributor product records identify this exact suffix as the surface-mount SOIC option. The package_svg_key for this record is soic-16, representing all 16 physical positions. Confirm pin functions and handling details against the pin-configuration table in the official SN74HC365 datasheet.
Where can I download the SN74HC365D datasheet PDF?
The official SN74HC365D datasheet is available from the Texas Instruments product page at https://www.ti.com/product/SN74HC365 and through the manufacturer literature link at https://www.ti.com/lit/gpn/SN74HC365. These pages provide the electrical characteristics, truth table, ordering information, pin configuration, and recommended operating conditions. Third-party PDF mirrors may show different revisions or page counts, so use the TI document for design release.
Where can I find the SN74HC365D pinout?
The SN74HC365D pin configuration is shown in the manufacturer datasheet under the package and pin-description information. The 16-SOIC arrangement includes six data inputs, six non-inverting outputs, two output-enable inputs, and power connections. Use the numbered diagram in the official SN74HC365 document to assign PCB nets because enable pins are shared by all six channels and their active polarity must be respected.
Can 74HC365D from Nexperia replace the SN74HC365D?
The Nexperia 74HC365D,653 is a 74HC365-family hex non-inverting 3-state buffer offered in a 16-SO package and is a strong functional cross-reference for the Texas Instruments SN74HC365D. Its family description identifies the same six-channel buffer and 3-state architecture. Final qualification should confirm pinout, enable polarity, propagation timing, output drive, operating temperature, and lifecycle requirements in the Nexperia datasheet.
What is the difference between SN74HC365D and CD74HC365M?
The SN74HC365D and CD74HC365M are both Texas Instruments 74HC365 hex 3-state buffers in 16-pin SOIC packages, so they are closely related same-brand drop-in candidates. The D suffix and M suffix distinguish the package ordering formats within the family. Before substitution, compare propagation delay, output current, enable-input behavior, operating temperature, and the exact pin configuration in the manufacturer datasheets.
What can replace the SN74HC365D in a 5 V design?
The SN74HC365D can be replaced by a pin-compatible 74HC365-family device such as the Nexperia 74HC365D,653 when its datasheet confirms equivalent pinout and 5 V timing and drive characteristics. The Texas Instruments CD74HC365M is another closely related option. A 74HCT365-family part may offer TTL-compatible input thresholds, while a 74LVC365-family part changes the input-voltage behavior, so each substitution requires threshold and timing checks.
When should I choose SN74HC365D instead of 74HCT365D?
Choose the SN74HC365D when the driving signals use CMOS thresholds at the device supply voltage and the design benefits from the HC family's CMOS input behavior. Choose a 74HCT365-family alternative when legacy TTL outputs require guaranteed recognition by a TTL-compatible input threshold. The SN74HC365D also provides six buffered, individually routed outputs and a shared three-state disable function for controlled bus participation.
Is SN74HC365D suitable for memory address and clock buffering?
The SN74HC365D is specifically suited to memory-address and clock-driver applications because it offers six independent non-inverting channels with 3-state outputs. Texas Instruments identifies these uses in the device description, along with bus-oriented receivers and transmitters. The shared output-enable control lets a designer isolate a six-line address group or clock bus during bus handshaking while preserving logic polarity.
How should tri-state outputs be used on a shared bus?
A shared bus requires only one active driver at a time, while every disabled driver presents a high-impedance state. The SN74HC365D disables all six outputs when either output-enable input is high. Firmware or external bus-control logic should therefore assert the enable signal only for the device that owns the bus, and it should account for transition timing to prevent two enabled drivers from sourcing opposing logic levels.
Where can I buy SN74HC365D and request current availability?
The SN74HC365D can be requested through the Request a Quote form on this page, where current unit availability, quantity breaks, and lead time should be confirmed for the exact 16-SOIC suffix. The Texas Instruments product page provides ordering information, while the part is also listed by major distributors. Do not substitute a different package or tape-and-reel ordering code without confirming the manufacturer part number.
What is the current price of SN74HC365D?
Use the Request a Quote form on this page for the current SN74HC365D price and volume availability. The platform maintains pricing separately from technical content because market conditions and stock levels can change. Quote requests should identify the exact SN74HC365D suffix, desired quantity, and shipment destination so the commercial response corresponds to the correct 16-SOIC device.
What is the lead time for SN74HC365D?
Request the current lead time through the Request a Quote form on this page. Lead time can vary with order quantity, inventory position, manufacturing status, and destination, so a quotation tied to the requested quantity is more useful than a generic statement. Include the exact SN74HC365D manufacturer part number and packaging requirement when submitting the request.
Is SN74HC365D currently in stock?
Current SN74HC365D stock should be confirmed through the Request a Quote form on this page because availability can change after data synchronization. Submit the required quantity and shipment country or region, and request the current in-stock quantity and lead time. The product remains identified by Texas Instruments as an active family member, but a quotation is the appropriate mechanism for transaction-specific availability.
What are the key specifications engineers should know about SN74HC365D?
The principal SN74HC365D specifications are six non-inverting channels, 3-state outputs, two shared output-enable inputs, a 2 V to 6 V operating range, and a 16-SOIC package. According to Texas Instruments, either enable input being high forces all outputs into high impedance. The device is intended for memory-address, clock, bus receiver, and bus transmitter applications where conditional bus participation is required.

Données de référence d'ingénierie pour SN74HC365D — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the SN74HC365D when a 5 V system needs six non-inverting, 3-state channels and the source signals use CMOS-compatible thresholds. Its shared output-enable control is useful for address, clock, and bus segments that must be released cleanly. The Texas Instruments CD74HC365M is the closest same-brand option to examine when an alternate orderable part is needed, provided its exact timing, temperature, and lifecycle data meet the design. The Nexperia 74HC365D,653 is a strong cross-brand 74HC365-family alternative in the same 16-SO footprint. Consider the 74HCT365D only when TTL-compatible input thresholds are required, and consider the 74LVC365AD only after confirming that its lower-voltage range and interface thresholds are acceptable. Before any substitution, verify pinout, enable polarity, propagation delay, output drive, operating temperature, and lifecycle status.

Comparaison avec les alternatives

Paramètre Ce produit CD74HC365M 74HC365D,653 MC74HC365ADG 74HCT365D 74LVC365AD
Package 16-SOIC 16-SOIC 16-SO 16-SO 16-SO 16-SO
Brand Texas Instruments Texas Instruments Nexperia onsemi Nexperia Nexperia
Function Hex non-inverting 3-state buffer/line driver Hex 3-state buffer/line driver Hex non-inverting 3-state buffer/line driver Hex 3-state buffer/line driver Hex 3-state buffer/line driver with TTL-compatible inputs Hex 3-state buffer/line driver
Number of Channels 6 6 6 6 6 6
Output Enable Control 2 shared output-enable inputs 2 shared output-enable inputs 2 shared output-enable inputs 2 shared output-enable inputs 2 shared output-enable inputs 2 shared output-enable inputs
Input Threshold Type CMOS-compatible HC input CMOS-compatible HC input CMOS-compatible HC input CMOS-compatible HC input TTL-compatible HCT input CMOS-compatible LVC input
Disabled Output State High impedance High impedance High impedance High impedance High impedance High impedance
Polarity Non-inverting Non-inverting Non-inverting Non-inverting Non-inverting Non-inverting

Principaux différenciateurs

  • Six non-inverting channels can be disabled as one group (vs MC74HC365ADG)
  • Direct 74HC365-family interface compatibility (vs 74HC365D,653)
  • TTL-compatible replacement requires a different input-threshold choice (vs 74HCT365D)

Notes de conception

Use the SN74HC365D as a buffer between a source and a shared bus rather than as an active bus terminator. Keep the device close to the driven receiver when propagation delay or edge-rate control is important. Provide a continuous ground reference and route output-enable traces away from fast clock and data paths. Because all six outputs share the two enable controls, a switching enable can affect every channel simultaneously and should be sequenced to prevent contention.

Place the decoupling capacitor close to the device supply and ground pins, and avoid routing output-enable signals beneath or immediately beside high-speed clock nets. The 16-SOIC footprint requires adequate lead spacing for assembly and inspection. Preserve a direct ground return for every output branch; long or shared return paths can produce unequal edge timing between channels even when the logic function itself is correct.

Do not treat a high-impedance output as a driven logic zero or one. The downstream bus must have an appropriate pull-up, pull-down, or other defined state whenever every driver is disabled. Also verify the active-low enable polarity before layout because driving an enable input to the wrong state can release the outputs unexpectedly. Do not leave unused digital inputs floating, and confirm all timing and current limits from the manufacturer datasheet.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Use the current Texas Instruments product page and material-declaration documentation to confirm environmental, automotive, lead-free, halogen-free, and conflict-minerals status for the exact orderable MPN.

Recherches associées

SN74HC365D datasheet SN74HC365 datasheet SN74HC365D pinout SN74HC365D datasheet pdf SN74HC365D equivalent SN74HC365D replacement SN74HC365D drop-in replacement SN74HC365D cross reference SN74HC365D vs 74HC365D,653 Texas Instruments SN74HC365D SN74HC365D 16-SOIC SN74HC365D price SN74HC365D stock

Composants & termes associés

Texas Instruments SN74HC365D SN74HC365 CD74HC365M 74HC365D,653 MC74HC365ADG 74HCT365D 74LVC365AD 74HC CMOS logic hex buffer line driver non-inverting buffer 3-state output high-impedance output output enable logic IC CMOS-compatible input TTL-compatible input 16-SOIC SOIC family surface-mount package memory-address driver clock driver bus-oriented receiver bus-oriented transmitter
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ