SPC5125YVN400R518 - 400MHz 32-bit MPU | NXP
Référence : SPC5125YVN400R518 ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $2.7026 | $2,70 |
| 10 | $2.5 | $25,00 |
| 100 | $2.25 | $225,00 |
| 500 | $2 | $1 000,00 |
| 1 000 | $1.75 | $1 750,00 |
SPC5125YVN400R518 Présentation
A microprocessor, or MPU, is a programmable semiconductor system that executes firmware and coordinates processors, memory, communications, and control peripherals. Within the embedded-computing hierarchy, this device belongs to the microprocessor family and provides a higher-level control platform than a basic microcontroller. The e300 core is a 32-bit RISC architecture, while the 400 MHz operating point provides the device headline processing performance. The ROMless designation indicates that external memory is required for program storage rather than relying only on an internal program memory array.
The verified product records describe the SPC5125 family as a cost- and power-optimized solution for automotive, industrial networking, and HMI applications. Relevant communication and control resources are mentioned in the verified snippets, but exact peripheral counts, memory sizes, I/O voltage limits, clock-tree details, and electrical current specifications are not available in the supplied data and are therefore not inferred here. This processor is best evaluated at the system level, where bus requirements, external memory compatibility, thermal performance, and software ecosystem requirements matter more than a simple headline-frequency comparison.
Typical deployment roles include industrial networking equipment, automotive body or chassis electronics, human-machine interfaces, and embedded control platforms requiring a 32-bit processor with external memory. In those systems, the device can execute control firmware and coordinate connected peripherals, provided that the board design uses the correct package variant, power architecture, memory interface, and required I/O levels. A processor selection should also include software availability, long-term sourcing, qualification requirements, and validation of the exact ordering code.
Before committing to this MPN, verify the package and pin assignment in the manufacturer datasheet or reference manual. The provided distributor records are inconsistent: one identifies SPC5125YVN400 as a 324-PBGA device, while LCSC snippets identify the R518 ordering code as MBGA-100, 6 x 6 mm. Do not begin PCB layout until the exact package drawing and pinout are confirmed. Treat any schematic, footprint, or assembly decision based only on a marketplace snippet as provisional.
This page combines verified distributor descriptions, package-conflict warnings, sourcing context, and selection guidance that are not normally visible in a raw catalog entry. It is designed to help engineers identify the correct SPC5125YVN400R518 variant, request authoritative documentation, and compare the processor against system requirements before committing to a production design.
Alternatives de remplacement direct pour SPC5125YVN400R518 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesSPC5125YVN400R518 Valeurs maximales et caractéristiques électriques
| Processor Type | 32-bit microprocessor (MPU) |
| Processor Core | e300 Power Architecture |
| Fréquence d'horloge maximale | 400 MHz |
| Program Memory | ROMless |
| Operating Voltage | 1.33 V to 1.47 V |
| Verified Package Reference | PBGA-324 (23 x 23 mm) in SPC5125YVN400 listing |
| Conflicting Package Reference | MBGA-100 (6 x 6 mm) in LCSC listing |
| Type de montage | Surface mount |
| Architecture | 32-bit RISC embedded processor |
| Statut RoHS | Compliant according to the LCSC product listing |
Guide de configuration des broches du SPC5125YVN400R518 mbga-100 (6 x 6 mm) in lcsc listing
Configuration des broches du SPC5125YVN400R518 (boîtier mbga-100 (6 x 6 mm) in lcsc listing). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour SPC5125YVN400R518.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
SPC5125YVN400R518 convient pour 6 applications: Automotive Embedded Control, Industrial Networking Equipment, Human-Machine Interface Controller, External-Memory-Based Industrial Control, Communication Gateway Controller, Industrial HMI and Data Acquisition.
Automotive Embedded Control
The SPC5125YVN400R518 fits an automotive embedded-control role when the system requires a 400 MHz, 32-bit processor rather than a small microcontroller. Its e300 Power Architecture core and ROMless configuration allow firmware to reside in external memory, which supports larger control software, diagnostics, and communication middleware. According to the verified distributor descriptions, the MPC5125 family targets automotive applications. Final qualification still requires the correct package drawing, automotive temperature grade, power rails, and software qualification; those details are not supplied here.
Recommandé
Industrial Networking Equipment
The SPC5125YVN400R518 is positioned for industrial-networking equipment where a 400 MHz, 32-bit embedded processor can coordinate protocol processing, system management, and external communications. Its ROMless architecture is useful when the design requires flexible firmware storage and board-level memory scaling. The verified snippets specifically identify industrial networking as an MPC5125 application domain. Before selecting it, verify Ethernet or serial-interface requirements, package ballout, external transceiver support, thermal conditions, and long-term supply; those engineering details are not present in the supplied source set.
Recommandé
Human-Machine Interface Controller
The SPC5125YVN400R518 can serve as the central processor in a human-machine interface when the product needs more computation than a basic MCU and must manage display, input, communications, and application logic. Its 400 MHz e300 core provides a clear performance target, while the ROMless configuration leaves memory implementation flexible for product variants. The verified distributor snippets identify HMI as a target use case. Verify display interfaces, external memory, I/O expansion, graphics requirements, and package compatibility before committing the design.
Recommandé
External-Memory-Based Industrial Control
The SPC5125YVN400R518 is suited to systems that deliberately separate firmware storage from the processor through its ROMless architecture. That architecture can support field-updatable firmware, larger application code, and product configurations that share one controller platform. The verified data identifies the device as a 32-bit, 400 MHz MPU but does not disclose the memory bus or supported memory types. Therefore, memory-device selection, voltage compatibility, address mapping, and boot behavior must be validated directly from the authoritative NXP documentation.
Recommandé
Communication Gateway Controller
The SPC5125YVN400R518 may be used in a communication gateway where several protocol engines, management tasks, and diagnostic functions must run in one embedded platform. Its 400 MHz 32-bit architecture provides more headroom for control-plane software than a low-end microcontroller, while the MPC5125 family is explicitly associated with networking in the verified descriptions. The exact Ethernet, CAN, serial, USB, or other interface availability is not provided, so the design must first inventory required transceivers and confirm the correct NXP package and peripheral mapping.
Recommandé
Industrial HMI and Data Acquisition
The SPC5125YVN400R518 can form the processing core of an industrial HMI or data-acquisition system when the product combines a display interface, local control logic, communications, and field-service software. The 400 MHz 32-bit e300 processor provides a scalable computational platform, and the ROMless architecture supports external firmware storage. The verified records do not define ADC channels, display interfaces, isolation requirements, or memory timing. Those omissions must be resolved through the exact SPC5125 datasheet, reference manual, and system-level interface plan.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour SPC5125YVN400R518 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Brand | NXP Semiconductors |
| Processor Type | 32-bit MPU |
| Core | e300 Power Architecture |
| Clock Frequency | 400 MHz |
| Program Memory | ROMless |
| Operating Voltage | 1.33 V to 1.47 V |
| Target Applications | Automotive, industrial networking, and HMI |
| Drop-In Alternatives | No verified alternatives in supplied cross-reference data |
Principaux différenciateurs
- High-frequency 32-bit embedded processing (vs MPC5121VY400)
- ROMless architecture for external firmware storage (vs MCF52234CAL60)
- Positioned for automotive, industrial networking, and HMI systems (vs MC9S12DJ128VFUE)
Notes de conception
Do not create a PCB footprint from marketplace snippets alone. The verified records disagree between a 23 x 23 mm, 324-ball PBGA and a 6 x 6 mm, 100-ball MBGA interpretation of the R518 ordering code. First obtain the exact NXP package drawing and confirm the orderable MPN suffix. Then verify ball assignments, escape routing, via-in-pad or fanout requirements, and reflow-profile compatibility with the assembly process.
Build the power tree only after obtaining the authoritative core, I/O, and peripheral voltage requirements. The verified LCSC snippet gives a product operating range of 1.33 V to 1.47 V, but it does not identify rail sequencing, tolerance, current limits, startup behavior, or decoupling values. Use the manufacturer recommended power architecture and validate steady-state and transient current at 400 MHz before releasing the board.
A 400 MHz embedded processor requires disciplined signal-integrity and power-integrity planning. Keep the processor supplies, decoupling network, memory interface, and clock routing within the constraints of the exact reference design and package stack-up. Use the manufacturer’s recommended layer transitions and escape topology where available. Do not infer interface timing from the 400 MHz headline frequency; the memory and I/O timing must come from the authoritative datasheet.
The most important risk is confusing SPC5125YVN400 with SPC5125YVN400R518. The former is described in one verified listing as PBGA-324, while R518 records show MBGA-100. Treat these as potentially different orderable configurations until NXP documentation proves otherwise. Also do not infer drop-in compatibility from the shared MPC5125 or e300 naming. Package, pinout, voltage, memory, software, and lifecycle checks must all pass before substitution.
Informations de conformité
RoHS compliance is stated by the verified LCSC listing. No authoritative NXP compliance declaration for REACH, AEC-Q100, lead-free status, halogen-free status, or conflict-minerals status was supplied. Automotive application positioning does not by itself establish AEC-Q100 qualification.
