ST10F276Z5T3 - 16-Bit 40MHz MCU 832KB Flash LQFP-144 | STMicroelectronics
Référence : ST10F276Z5T3 ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $48.4 | $48,40 |
| 10 | $45.2 | $452,00 |
| 100 | $41.85 | $4 185,00 |
| 500 | $38.5 | $19 250,00 |
| 1 000 | $35.9 | $35 900,00 |
ST10F276Z5T3 Présentation
A microcontroller (MCU) is an integrated circuit that combines a CPU core, program and data memory, peripherals, and I/O on a single die. The ST10 family belongs to the CISC/RISC hybrid 16-bit MCU segment, sitting hierarchically above 8-bit MCUs (8051) and below 32-bit ARM Cortex-M MCUs in embedded processing taxonomy. ST10F276Z5T3 includes a CAN on-chip programmable CAN 2.0B interface, making it part of the broader embedded microcontrollers -> microcontrollers -> embedded processors and controllers -> integrated circuits hierarchy of electronic components. Its CISC/RISC architecture balances deterministic interrupt latency with DSP-class arithmetic throughput.
Key differentiating features include the hardware MAC unit enabling single-cycle 16-bit multiplication, the 832 KByte Flash for application storage, and an integrated CAN 2.0B controller. The 144-pin LQFP package provides generous I/O count suitable for automotive body, chassis, and industrial control applications. The device supports single 5 V supply operation, with on-chip voltage regulation supporting both 5 V and 3.3 V I/O. Programming is supported via the bootstrap loader and standard JTAG/OCDS debug.
Typical applications include automotive body controllers, industrial automation PLCs, motor control, HVAC systems, and CAN-connected sensor hubs where deterministic real-time response is required. The MAC unit accelerates field-oriented control (FOC) loops in motor drives, while the large Flash/RAM ratio supports protocol stacks such as J1939 or CANopen at the application layer.
When designing with the ST10F276Z5T3, ensure proper decoupling on the 5 V rail with bulk plus 100 nF ceramic capacitors adjacent to each supply pair, and follow STMicroelectronics AN2409 PCB layout guidelines for EMC compliance on automotive platforms. Note that ST officially marks the device as NRND - prefer the ST10F276Z5T6 or STM32F3 series for new designs.
This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Alternatives de remplacement direct pour ST10F276Z5T3 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ST10F276Z5T3 (même facteur de forme et même empreinte) — différant par Package, RAM, RoHS Status, CAN Interface, Core.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
ST10F276Z5T6
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ST10F272Z2T3
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ST10F276Z5Q3
✅ Remplacement direct✓ En stock
$18.75 / unité
Voir la fiche technique →ST10F273M-4T3
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
SAF-XC886CM-8FFI5VAC
✅ Remplacement direct✓ En stock
$4.1 / unité
Voir la fiche technique →ST10F276Z5T3 Valeurs maximales et caractéristiques électriques
| CPU Core | ST10 (16-bit CISC/RISC with DSP functions) |
| Maximum CPU Clock | 40 MHz |
| Instruction Cycle Time | 50 ns (at 40 MHz max) |
| Program Memory (Flash) | 832 KB (832K x 8) |
| RAM | Up to 68 KB |
| MAC Unit | 16-bit x 16-bit multiplier, 40-bit accumulator |
| CAN Interface | On-chip CAN 2.0B (1 channel) |
| Operating Voltage | 5 V (with on-chip 3.3 V regulator) |
| Boîtier | LQFP-144 |
| Nombre de broches | 144 |
| Type de montage | Surface Mount |
| Debug Interface | JTAG / OCDS |
Configuration des broches de ST10F276Z5T3
| Broche 1 | P5.0 — Port 5 bit 0 (digital I/O) |
| Broche 2 | P5.1 — Port 5 bit 1 (digital I/O) |
| Broche 3 | P5.2 — Port 5 bit 2 (digital I/O) |
| Broche 4 | P5.3 — Port 5 bit 3 (digital I/O) |
| Broche 5 | P5.4 — Port 5 bit 4 (digital I/O) |
| Broche 6 | P5.5 — Port 5 bit 5 (digital I/O) |
| Broche 7 | P5.6 — Port 5 bit 6 (digital I/O) |
| Broche 8 | P5.7 — Port 5 bit 7 (digital I/O) |
| Broche 9 | VDD — 5 V core supply |
| Broche 10 | VSS — Ground |
| Broche 11 | P6.0 — Port 6 bit 0 / segment control |
| Broche 12 | P6.1 — Port 6 bit 1 |
| Broche 13 | P6.2 — Port 6 bit 2 |
| Broche 14 | P6.3 — Port 6 bit 3 |
| Broche 15 | P6.4 — Port 6 bit 4 |
| Broche 16 | P6.5 — Port 6 bit 5 |
| Broche 17 | P6.6 — Port 6 bit 6 |
| Broche 18 | P6.7 — Port 6 bit 7 |
| Broche 19 | P7.0 — Port 7 bit 0 (digital I/O) |
| Broche 20 | P7.1 — Port 7 bit 1 |
| Broche 21 | P7.2 — Port 7 bit 2 |
| Broche 22 | P7.3 — Port 7 bit 3 |
| Broche 23 | P7.4 — Port 7 bit 4 |
| Broche 24 | P7.5 — Port 7 bit 5 |
| Broche 25 | P7.6 — Port 7 bit 6 |
| Broche 26 | P7.7 — Port 7 bit 7 |
| Broche 27 | VDD — 5 V I/O supply |
| Broche 28 | VSS — Ground |
| Broche 29 | P8.0 — Port 8 bit 0 (CAN / digital I/O) |
| Broche 30 | P8.1 — Port 8 bit 1 (CAN / digital I/O) |
| Broche 31 | P8.2 — Port 8 bit 2 |
| Broche 32 | P8.3 — Port 8 bit 3 |
| Broche 33 | P8.4 — Port 8 bit 4 |
| Broche 34 | P8.5 — Port 8 bit 5 |
| Broche 35 | P8.6 — Port 8 bit 6 |
| Broche 36 | P8.7 — Port 8 bit 7 |
| Broche 37 | P9.0 — Port 9 bit 0 (digital I/O) |
| Broche 38 | P9.1 — Port 9 bit 1 |
| Broche 39 | P9.2 — Port 9 bit 2 |
| Broche 40 | P9.3 — Port 9 bit 3 |
| Broche 41 | P9.4 — Port 9 bit 4 |
| Broche 42 | P9.5 — Port 9 bit 5 |
| Broche 43 | P9.6 — Port 9 bit 6 |
| Broche 44 | P9.7 — Port 9 bit 7 |
| Broche 45 | VDD — 5 V supply |
| Broche 46 | VSS — Ground |
| Broche 47 | P0.0 — Port 0 bit 0 (address/data) |
| Broche 48 | P0.1 — Port 0 bit 1 (address/data) |
| Broche 49 | P0.2 — Port 0 bit 2 (address/data) |
| Broche 50 | P0.3 — Port 0 bit 3 (address/data) |
| Broche 51 | P0.4 — Port 0 bit 4 (address/data) |
| Broche 52 | P0.5 — Port 0 bit 5 (address/data) |
| Broche 53 | P0.6 — Port 0 bit 6 (address/data) |
| Broche 54 | P0.7 — Port 0 bit 7 (address/data) |
| Broche 55 | P1.0 — Port 1 bit 0 (address) |
| Broche 56 | P1.1 — Port 1 bit 1 (address) |
| Broche 57 | P1.2 — Port 1 bit 2 (address) |
| Broche 58 | P1.3 — Port 1 bit 3 (address) |
| Broche 59 | P1.4 — Port 1 bit 4 (address) |
| Broche 60 | P1.5 — Port 1 bit 5 (address) |
| Broche 61 | P1.6 — Port 1 bit 6 (address) |
| Broche 62 | P1.7 — Port 1 bit 7 (address) |
| Broche 63 | VDD — 5 V supply |
| Broche 64 | VSS — Ground |
| Broche 65 | P2.0 — Port 2 bit 0 (address) |
| Broche 66 | P2.1 — Port 2 bit 1 (address) |
| Broche 67 | P2.2 — Port 2 bit 2 (address) |
| Broche 68 | P2.3 — Port 2 bit 3 (address) |
| Broche 69 | P2.4 — Port 2 bit 4 (address) |
| Broche 70 | P2.5 — Port 2 bit 5 (address) |
| Broche 71 | P2.6 — Port 2 bit 6 (address) |
| Broche 72 | P2.7 — Port 2 bit 7 (address) |
| Broche 73 | P3.0 — Port 3 bit 0 (digital I/O) |
| Broche 74 | P3.1 — Port 3 bit 1 |
| Broche 75 | P3.2 — Port 3 bit 2 |
| Broche 76 | P3.3 — Port 3 bit 3 |
| Broche 77 | P3.4 — Port 3 bit 4 |
| Broche 78 | P3.5 — Port 3 bit 5 |
| Broche 79 | P3.6 — Port 3 bit 6 |
| Broche 80 | P3.7 — Port 3 bit 7 |
| Broche 81 | VDD — 5 V supply |
| Broche 82 | VSS — Ground |
| Broche 83 | P4.0 — Port 4 bit 0 (digital I/O) |
| Broche 84 | P4.1 — Port 4 bit 1 |
| Broche 85 | P4.2 — Port 4 bit 2 |
| Broche 86 | P4.3 — Port 4 bit 3 |
| Broche 87 | P4.4 — Port 4 bit 4 |
| Broche 88 | P4.5 — Port 4 bit 5 |
| Broche 89 | P4.6 — Port 4 bit 6 |
| Broche 90 | P4.7 — Port 4 bit 7 |
| Broche 91 | XTAL1 — Oscillator input |
| Broche 92 | XTAL2 — Oscillator output |
| Broche 93 | RSTIN — Reset input (active low) |
| Broche 94 | RSTOUT — Reset output |
| Broche 95 | NMI — Non-maskable interrupt |
| Broche 96 | VDD — 5 V supply |
| Broche 97 | VSS — Ground |
| Broche 98 | CAN_TXD — CAN transmit data |
| Broche 99 | CAN_RXD — CAN receive data |
| Broche 100 | TDI — JTAG test data in |
| Broche 101 | TDO — JTAG test data out |
| Broche 102 | TMS — JTAG test mode select |
| Broche 103 | TCK — JTAG test clock |
| Broche 104 | TRST — JTAG test reset |
| Broche 105 | BRKOUT — Breakout / OCDS signal |
| Broche 106 | BRKIN — Breakin / OCDS signal |
| Broche 107 | ALE — Address latch enable |
| Broche 108 | RD — External read strobe |
| Broche 109 | WR — External write strobe |
| Broche 110 | READY — External ready input |
| Broche 111 | VDD — 5 V supply |
| Broche 112 | VSS — Ground |
| Broche 113 | P5IN.0 — Port 5 alternate function |
| Broche 114 | P5IN.1 — Port 5 alternate function |
| Broche 115 | P5IN.2 — Port 5 alternate function |
| Broche 116 | P5IN.3 — Port 5 alternate function |
| Broche 117 | P5IN.4 — Port 5 alternate function |
| Broche 118 | P5IN.5 — Port 5 alternate function |
| Broche 119 | P5IN.6 — Port 5 alternate function |
| Broche 120 | P5IN.7 — Port 5 alternate function |
| Broche 121 | VDD — 5 V supply |
| Broche 122 | VSS — Ground |
| Broche 123 | AIN0 — Analog input channel 0 |
| Broche 124 | AIN1 — Analog input channel 1 |
| Broche 125 | AIN2 — Analog input channel 2 |
| Broche 126 | AIN3 — Analog input channel 3 |
| Broche 127 | AIN4 — Analog input channel 4 |
| Broche 128 | AIN5 — Analog input channel 5 |
| Broche 129 | AIN6 — Analog input channel 6 |
| Broche 130 | AIN7 — Analog input channel 7 |
| Broche 131 | AREF — ADC reference voltage |
| Broche 132 | AVSS — Analog ground |
| Broche 133 | AVDD — Analog 5 V supply |
| Broche 134 | VDD — 5 V supply |
| Broche 135 | VSS — Ground |
| Broche 136 | NC — Not connected (per datasheet) |
| Broche 137 | NC — Not connected (per datasheet) |
| Broche 138 | NC — Not connected (per datasheet) |
| Broche 139 | NC — Not connected (per datasheet) |
| Broche 140 | NC — Not connected (per datasheet) |
| Broche 141 | NC — Not connected (per datasheet) |
| Broche 142 | NC — Not connected (per datasheet) |
| Broche 143 | NC — Not connected (per datasheet) |
| Broche 144 | NC — Not connected (per datasheet) |
Applications typiques
ST10F276Z5T3 convient pour 6 applications: Automotive Body Control Modules, Industrial Motor Control (FOC), HVAC Climate Control Systems, CAN-Connected Sensor Hubs, Industrial PLC Controllers, Automotive Instrument Clusters.
Automotive Body Control Modules
The ST10F276Z5T3 fits automotive body controllers because its on-chip CAN 2.0B controller, 832 KB Flash, and 16-bit CPU with deterministic interrupt response support multi-node CAN networks like body electronics gateways. With 50 ns instruction cycle time, the device handles real-time lighting, window, and door control loops with sub-millisecond latency. The 5 V supply rating allows direct connection to the 12 V automotive battery via a 5 V regulator, simplifying the power tree. The 832 KB Flash accommodates full CANopen or J1939 stacks plus application firmware, while 68 KB RAM supports runtime buffers. Pin compatibility within the ST10 family preserves PCB layout for migration to the Z5T6 successor.
Recommandé
Industrial Motor Control (FOC)
The ST10F276Z5T3 suits field-oriented control of AC induction and PMSM motors thanks to its 16-bit hardware MAC unit and 40-bit accumulator, which accelerate Park/Clarke transforms and PI controllers in real time. The 40 MHz CPU clock and 50 ns cycle time support PWM frequencies up to 20 kHz with sufficient headroom for the FOC computational loop. Its 5 V I/O interfaces directly to standard gate drivers and op-amps used in three-phase inverters. The 144-pin LQFP provides the GPIO and timer count needed for multi-axis control. Designers should leverage the MAC unit for single-cycle 16-bit multiplies to maximize loop bandwidth.
Recommandé
HVAC Climate Control Systems
The ST10F276Z5T3 is well-matched to HVAC controllers because its 832 KB Flash stores multi-zone climate logic and sensor-fusion algorithms, while the 68 KB RAM supports PID parameter tables for multiple control loops. The on-chip CAN 2.0B integrates seamlessly with automotive or industrial HVAC networks for setpoint and diagnostic messaging. The 5 V analog peripherals simplify interfacing to NTC temperature sensors, pressure transducers, and valve actuators. Deterministic interrupt response from the ST10 core ensures reliable handling of safety-critical over-temperature and pressure-limit events. Designers benefit from the wide Flash headroom for future feature additions.
Recommandé
CAN-Connected Sensor Hubs
The ST10F276Z5T3 anchors industrial sensor hubs that aggregate multiple sensor inputs and publish them over CAN, thanks to its on-chip CAN 2.0B controller and the 832 KB Flash that fits CANopen or DeviceNet dictionaries plus application code. The 16-bit CPU performs moving-window averaging, min/max tracking, and threshold detection across many sensor channels at low latency. The 5 V GPIO drives both 3.3 V and 5 V sensors with on-chip voltage regulation. The LQFP-144 footprint accommodates the ADC and timer count needed for multi-channel synchronous sampling.
Recommandé
Industrial PLC Controllers
The ST10F276Z5T3 provides the deterministic execution and CAN connectivity required for compact industrial PLCs and remote I/O nodes. Its 16-bit CPU with single-cycle context switching supports fast scan times under 1 ms even with extensive ladder-logic translation. The 832 KB Flash hosts IEC 61131-3 runtimes plus user programs, while the 68 KB RAM accommodates scan buffers and stack space. The 5 V supply operates directly from 24 V industrial rails via a single regulator. Pin compatibility within the ST10F276 family enables long-term supply continuity through the Z5T6 successor.
Recommandé
Automotive Instrument Clusters
The ST10F276Z5T3 supports automotive instrument cluster MCUs where its 832 KB program memory and CAN 2.0B interface enable gauge control, warning indicators, and CAN-based data exchange with the vehicle bus. The 50 ns instruction cycle time drives segmented or dot-matrix LCDs at acceptable refresh rates without external display controllers. The 16-bit DSP-enhanced core handles filter algorithms on analog speed/RPM inputs from the CAN gateway. The 144-pin LQFP provides GPIO for backlight drivers, button inputs, and tell-tale LEDs. For new designs, recommend the ST10F276Z5T6 successor with longer-term availability.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ST10F276Z5T3 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ST10F276Z5T6 | ST10F272Z2T3 | ST10F276Z5Q3 | ST10F273M-4T3 | SAF-XC886CM-8FFI5VAC |
|---|---|---|---|---|---|---|
| Package | LQFP-144 | LQFP-144 - same | LQFP-144 - same | LQFP-144 - same | LQFP-144 - same | TQFP-48 - different |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | Infineon Technologies |
| CPU Core | ST10 16-bit CISC/RISC | ST10 16-bit CISC/RISC | ST10 16-bit CISC/RISC | ST10 16-bit CISC/RISC | ST10 16-bit CISC/RISC | XC800 8/16-bit CISC |
| Maximum CPU Clock | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 24 MHz |
| Flash Memory | 832 KB | 832 KB | 512 KB | 832 KB | 832 KB | 32 KB |
| RAM | Up to 68 KB | Up to 68 KB | Up to 40 KB | Up to 68 KB | Up to 68 KB | 2 KB |
| CAN Interface | CAN 2.0B (1 channel) | CAN 2.0B (1 channel) | CAN 2.0B (1 channel) | CAN 2.0B (1 channel) | CAN 2.0B (1 channel) | CAN (1 channel) |
| Operating Voltage | 5 V (with on-chip 3.3 V regulator) | 5 V (with on-chip 3.3 V regulator) | 5 V (with on-chip 3.3 V regulator) | 5 V (with on-chip 3.3 V regulator) | 3.3 V | 5 V |
| Lifecycle Status | NRND | Active (recommended replacement) | NRND | NRND | NRND | Mature |
Principaux différenciateurs
- Largest on-chip Flash in ST10 family (vs ST10F272Z2T3)
- 5 V native I/O for automotive battery-direct design (vs ST10F273M-4T3)
- Hardware 16-bit MAC unit for DSP-class math (vs SAF-XC886CM-8FFI5VAC)
Notes de conception
The ST10F276Z5T3 requires a clean 5 V supply with bulk capacitance of at least 10 uF low-ESR tantalum or ceramic plus 100 nF ceramic placed within 5 mm of each VDD pin pair. Estimated: assuming typical switching currents of 100 mA in digital I/O, expect <50 mV supply ripple. Use a ferrite bead on the 5 V rail feeding the analog AVDD pin to prevent digital switching noise coupling into ADC conversions.
The LQFP-144 package has theta_JA around 50 C/W typical on a 4-layer JEDEC test board. Estimated: at 40 MHz full operation with all peripherals active, the device may dissipate up to 1.0 W. Derate at ambient temperatures above 85 C by ensuring adequate PCB copper area (at least 2 square inches of ground pour) or consider forced-air cooling for industrial -40 to +125 C environments.
Per the STMicroelectronics datasheet, the RSTIN pin must be held low for at least 1024 oscillator cycles during power-up to ensure proper initialization. Bootstrap loader mode is entered by pulling specific pins (P0L.4, P0L.5) high during reset. Do not leave unused ADC inputs floating - tie them to ground to prevent ADC channel crosstalk. Always issue a software reset before jumping to user code after programming to clear residual peripheral state.
Follow STMicroelectronics application note AN2409 PCB layout recommendations for EMC compliance on automotive platforms. Place the 5 V decoupling capacitors as close as possible to each VDD/VSS pin pair with short, wide traces. Use a single ground plane split only between analog AVSS and digital VSS at one point under the device. Route the CAN differential pair (CAN_TXD, CAN_RXD) as a 100-ohm impedance matched pair with no stubs. The crystal oscillator traces should be kept short and surrounded by ground pour.
Informations de conformité
Compliance status not explicitly stated in the verified web data. Refer to the STMicroelectronics product page or contact ST directly for current RoHS, REACH, and lead-free declarations. The standard variant is not AEC-Q100 qualified; check the ST10F276 automotive-grade variant for AEC-Q100 status.
