STM32F105VBH6 - 72MHz Cortex-M3 MCU with 128KB Flash | STMicroelectronics
Référence : STM32F105VBH6 ✓ ActifSTM32F105VBH6 Présentation
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one compact device. The STM32F105VBH6 uses the ARM Cortex-M3 RISC architecture, a 32-bit processor core designed for embedded control. Within the product hierarchy, it is an MCU based on a 32-bit RISC core, supporting real-time control, communications, data acquisition, and firmware-driven system management without the complexity of an application processor.
The device provides 128 KB of Flash memory, organized as 128K x 8, for firmware storage, alongside 32 KB of RAM for working data, buffers, stacks, and peripheral operations. Its 72 MHz operating frequency gives embedded-control applications useful processing headroom for communication protocols, state machines, and concurrent peripheral tasks. The compact 100-LFBGA package supports space-constrained boards but requires careful escape routing, fine-pitch assembly capability, and adequate thermal design.
The STM32F105 connectivity line is positioned for designs requiring more communications capability than basic general-purpose MCUs. Its Ethernet-oriented architecture can support connected industrial equipment, gateways, controllers, and network-interface modules. Firmware configuration, peripheral assignment, clock selection, and board-level isolation remain application-specific, so the manufacturer datasheet and reference manual should guide final peripheral and pin-level decisions.
Typical uses include industrial Ethernet equipment, embedded network controllers, programmable automation modules, communications gateways, and compact data-acquisition systems. The 72 MHz Cortex-M3 core is appropriate for protocol processing and supervisory control, while 128 KB of Flash accommodates moderate-sized firmware images. Designs with larger codebases, intensive graphics, or substantially higher storage requirements should consider a higher-memory or higher-performance MCU family.
PCB implementation should prioritize short, continuous high-speed clock and Ethernet signal routes, controlled-impedance layout where applicable, solid grounding, and decoupling close to each supply pin. Because the 100-LFBGA footprint uses dense ball spacing, assembly capability, solder-mask definition, thermal vias, and inspection access should be confirmed before layout release.
This product record combines the manufacturer connectivity-line information, distributor technical summaries, package identification, sourcing options, and engineering guidance for the STM32F105VBH6. It is intended to accelerate component selection, PCB planning, firmware bring-up, and second-source qualification while keeping each claimed parameter traceable to manufacturer or distributor documentation.
Alternatives de remplacement direct pour STM32F105VBH6 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
STM32F105VBH7
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
STM32F105V8H7
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
STM32F105VBH6 Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Processor Core | ARM Cortex-M3 32-bit RISC core |
| Fréquence d'horloge maximale | 72 MHz |
| Word Size | 32 bit |
| Flash Memory | 128 KB (128K x 8) |
| RAM | 32 KB |
| Product Family | STM32F105xx connectivity line |
| Boîtier | 100-LFBGA (10 x 10 mm) |
| Type de montage | Surface mount |
| Core Architecture | ARM Cortex-M3 |
| Connectivity Positioning | Connectivity microcontroller family |
Guide de configuration des broches du STM32F105VBH6 100-lfbga (10 x 10 mm)
Configuration des broches du STM32F105VBH6 (boîtier 100-lfbga (10 x 10 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour STM32F105VBH6.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
STM32F105VBH6 convient pour 6 applications: Industrial Ethernet Control Modules, Embedded Network Gateways, Programmable Automation Controllers, Industrial Data Acquisition Units, Communications Hubs and Protocol Bridges, Connected Measurement and Diagnostic Instruments.
Industrial Ethernet Control Modules
The STM32F105VBH6 fits compact industrial Ethernet control modules because its 72 MHz ARM Cortex-M3 core can execute communication processing alongside real-time supervisory logic. The STM32F105 connectivity-line positioning is appropriate for equipment that communicates with sensors, actuators, or remote supervisory systems. With 128 KB of Flash for firmware and 32 KB of RAM for buffers, the device can support moderate protocol stacks and application tasks. The design must pair the MCU with a suitable Ethernet PHY, provide the required magnetics or isolation, and route high-speed signals according to the manufacturer reference design and board stack-up.
Recommandé
Embedded Network Gateways
STM32F105VBH6 is a strong candidate for embedded gateways that translate between a local serial interface and an Ethernet network. Its 72 MHz Cortex-M3 performance provides useful throughput for protocol conversion, status monitoring, and configuration processing, while 128 KB of Flash accommodates a moderately sized firmware image. The 32 KB of RAM must be budgeted for packet buffers, protocol state, and task stacks. A production gateway should also include watchdog recovery, controlled boot sequencing, secure firmware-update planning, and galvanic-isolation requirements appropriate to the installation environment.
Recommandé
Programmable Automation Controllers
The STM32F105VBH6 can serve as the central controller in programmable automation equipment requiring deterministic peripheral handling and network connectivity. Its 72 MHz Cortex-M3 core is suitable for sequencing logic, machine-state management, communication tasks, and supervisory functions. The 128 KB of Flash supports a moderate embedded application, while the 32 KB RAM provides space for working variables and communication buffers. Because the device uses a compact 100-LFBGA package, the controller board can remain compact, but assembly and test processes must support fine-pitch soldering and adequate inspection access.
Recommandé
Industrial Data Acquisition Units
STM32F105VBH6 is appropriate for compact data-acquisition units that collect sensor information, perform local filtering, and forward results over an industrial network. The Cortex-M3 core's 72 MHz operating frequency supports sampling coordination, digital filtering, and communication tasks without requiring an application processor. Its 128 KB Flash and 32 KB RAM are sufficient for moderate acquisition firmware, although buffer-heavy designs must avoid exceeding available memory. Designers should confirm ADC and peripheral requirements directly in the manufacturer documentation and isolate analog and network sections to protect measurement quality.
Recommandé
Communications Hubs and Protocol Bridges
The STM32F105VBH6 is well suited to protocol-bridge products that connect embedded serial devices to Ethernet-based management systems. Its connectivity-line architecture provides a natural platform for Ethernet communication, while the 72 MHz Cortex-M3 core handles frame processing, protocol translation, diagnostics, and local configuration. The 128 KB Flash capacity accommodates substantial but not unrestricted firmware, so code size and optional features should be tracked throughout development. A robust design should include watchdog handling, fault-safe restart behavior, link monitoring, and firmware revision management.
Recommandé
Connected Measurement and Diagnostic Instruments
STM32F105VBH6 can support connected measurement instruments that combine local signal processing with remote configuration and diagnostics. The 72 MHz Cortex-M3 core provides sufficient performance for control sequencing, calibration logic, and communication handling, while the 128 KB Flash and 32 KB RAM fit moderate firmware and working sets. Its 100-LFBGA construction helps limit board area in portable or panel-mounted equipment. Final design work should verify analog-interface requirements, clock accuracy, thermal performance, and the exact exposed-ball assignments and thermal paths specified by STMicroelectronics.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour STM32F105VBH6 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | STM32F105VBH7 | STM32F105V8H7 |
|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 100-LFBGA (10 x 10 mm) | 100-LFBGA (10 x 10 mm) | 100-LFBGA (10 x 10 mm) |
| Processor Core | ARM Cortex-M3 32-bit RISC | ARM Cortex-M3 32-bit RISC | ARM Cortex-M3 32-bit RISC |
| Maximum Clock Frequency | 72 MHz | 72 MHz | 72 MHz |
| Product Line | STM32F105xx connectivity line | STM32F105xx connectivity line | STM32F105xx connectivity line |
| Ethernet Support | STM32F105 connectivity line | STM32F105 connectivity line | STM32F105 connectivity line |
Principaux différenciateurs
- Larger Flash configuration within the same STM32F105V family (vs STM32F105V8H7)
- 72 MHz Cortex-M3 processing in a compact connectivity MCU (vs STM32F105VBH7)
- Connectivity-line positioning for embedded Ethernet designs (vs STM32F105V8H7)
Notes de conception
Use STMicroelectronics' 100-LFBGA land pattern and package drawing as the controlling PCB geometry. Treat the 10 x 10 mm package as a fine-pitch assembly: define solder-mask openings and paste apertures appropriate to the assembly process, maintain thermal and electrical symmetry, and provide test access where practical. Validate the stack-up, paste volume, reflow profile, and placement tolerances before production to reduce bridged-ball and open-joint risks.
Place every supply decoupling capacitor immediately adjacent to its associated power balls and connect the ground return through the shortest practical path. Follow the manufacturer recommendations for capacitor type, voltage rating, and effective capacitance across the required temperature and frequency range. Separate sensitive analog references and communication circuitry from switching-node and high-current return paths to prevent supply ripple from degrading measurement and Ethernet performance.
Plan clock, Ethernet, and other high-speed signals as continuous controlled-impedance routes where applicable. Avoid stubs, unnecessary test-pad breaks, and long parallel runs over discontinuous reference planes. STMicroelectronics reference designs and the manufacturer pin-description tables should be reviewed for recommended peripheral placement. For Ethernet implementations, preserve the required component placement and isolation strategy established by the selected PHY and reference design.
Do not treat a cross-reference equivalence as proof that a replacement is production-ready. Confirm the exact 100-LFBGA ball map, operating limits, memory configuration, temperature grade, peripheral set, qualification status, and device-driver behavior. The 128 KB Flash limit of STM32F105VBH6 should also be tracked in firmware size reports, especially when optional communications stacks and diagnostic features are enabled.
Informations de conformité
Compliance status requires confirmation from the manufacturer product page or current material declaration for the exact ordering code.