STM32F105VBH6 - 72MHz Cortex-M3 MCU with 128KB Flash | STMicroelectronics
MPN: STM32F105VBH6 ✓ 啟用中STM32F105VBH6 概覽
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one compact device. The STM32F105VBH6 uses the ARM Cortex-M3 RISC architecture, a 32-bit processor core designed for embedded control. Within the product hierarchy, it is an MCU based on a 32-bit RISC core, supporting real-time control, communications, data acquisition, and firmware-driven system management without the complexity of an application processor.
The device provides 128 KB of Flash memory, organized as 128K x 8, for firmware storage, alongside 32 KB of RAM for working data, buffers, stacks, and peripheral operations. Its 72 MHz operating frequency gives embedded-control applications useful processing headroom for communication protocols, state machines, and concurrent peripheral tasks. The compact 100-LFBGA package supports space-constrained boards but requires careful escape routing, fine-pitch assembly capability, and adequate thermal design.
The STM32F105 connectivity line is positioned for designs requiring more communications capability than basic general-purpose MCUs. Its Ethernet-oriented architecture can support connected industrial equipment, gateways, controllers, and network-interface modules. Firmware configuration, peripheral assignment, clock selection, and board-level isolation remain application-specific, so the manufacturer datasheet and reference manual should guide final peripheral and pin-level decisions.
Typical uses include industrial Ethernet equipment, embedded network controllers, programmable automation modules, communications gateways, and compact data-acquisition systems. The 72 MHz Cortex-M3 core is appropriate for protocol processing and supervisory control, while 128 KB of Flash accommodates moderate-sized firmware images. Designs with larger codebases, intensive graphics, or substantially higher storage requirements should consider a higher-memory or higher-performance MCU family.
PCB implementation should prioritize short, continuous high-speed clock and Ethernet signal routes, controlled-impedance layout where applicable, solid grounding, and decoupling close to each supply pin. Because the 100-LFBGA footprint uses dense ball spacing, assembly capability, solder-mask definition, thermal vias, and inspection access should be confirmed before layout release.
This product record combines the manufacturer connectivity-line information, distributor technical summaries, package identification, sourcing options, and engineering guidance for the STM32F105VBH6. It is intended to accelerate component selection, PCB planning, firmware bring-up, and second-source qualification while keeping each claimed parameter traceable to manufacturer or distributor documentation.
直接替換替代品,適用於 STM32F105VBH6 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
STM32F105VBH7
✅ 直接替換📋 參考替代品(不在目錄中)
STM32F105V8H7
✅ 直接替換📋 參考替代品(不在目錄中)
STM32F105VBH6 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Processor Core | ARM Cortex-M3 32-bit RISC core |
| 最大時脈頻率 | 72 MHz |
| Word Size | 32 bit |
| Flash Memory | 128 KB (128K x 8) |
| RAM | 32 KB |
| Product Family | STM32F105xx connectivity line |
| 封裝 | 100-LFBGA (10 x 10 mm) |
| 安裝類型 | Surface mount |
| Core Architecture | ARM Cortex-M3 |
| Connectivity Positioning | Connectivity microcontroller family |
STM32F105VBH6 100-lfbga (10 x 10 mm) 腳位配置指南
STM32F105VBH6(100-lfbga (10 x 10 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: STM32F105VBH6.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32F105VBH6 適用於 6 應用s: Industrial Ethernet Control Modules, Embedded Network Gateways, Programmable Automation Controllers, Industrial Data Acquisition Units, Communications Hubs and Protocol Bridges, Connected Measurement and Diagnostic Instruments.
Industrial Ethernet Control Modules
The STM32F105VBH6 fits compact industrial Ethernet control modules because its 72 MHz ARM Cortex-M3 core can execute communication processing alongside real-time supervisory logic. The STM32F105 connectivity-line positioning is appropriate for equipment that communicates with sensors, actuators, or remote supervisory systems. With 128 KB of Flash for firmware and 32 KB of RAM for buffers, the device can support moderate protocol stacks and application tasks. The design must pair the MCU with a suitable Ethernet PHY, provide the required magnetics or isolation, and route high-speed signals according to the manufacturer reference design and board stack-up.
推薦
Embedded Network Gateways
STM32F105VBH6 is a strong candidate for embedded gateways that translate between a local serial interface and an Ethernet network. Its 72 MHz Cortex-M3 performance provides useful throughput for protocol conversion, status monitoring, and configuration processing, while 128 KB of Flash accommodates a moderately sized firmware image. The 32 KB of RAM must be budgeted for packet buffers, protocol state, and task stacks. A production gateway should also include watchdog recovery, controlled boot sequencing, secure firmware-update planning, and galvanic-isolation requirements appropriate to the installation environment.
推薦
Programmable Automation Controllers
The STM32F105VBH6 can serve as the central controller in programmable automation equipment requiring deterministic peripheral handling and network connectivity. Its 72 MHz Cortex-M3 core is suitable for sequencing logic, machine-state management, communication tasks, and supervisory functions. The 128 KB of Flash supports a moderate embedded application, while the 32 KB RAM provides space for working variables and communication buffers. Because the device uses a compact 100-LFBGA package, the controller board can remain compact, but assembly and test processes must support fine-pitch soldering and adequate inspection access.
推薦
Industrial Data Acquisition Units
STM32F105VBH6 is appropriate for compact data-acquisition units that collect sensor information, perform local filtering, and forward results over an industrial network. The Cortex-M3 core's 72 MHz operating frequency supports sampling coordination, digital filtering, and communication tasks without requiring an application processor. Its 128 KB Flash and 32 KB RAM are sufficient for moderate acquisition firmware, although buffer-heavy designs must avoid exceeding available memory. Designers should confirm ADC and peripheral requirements directly in the manufacturer documentation and isolate analog and network sections to protect measurement quality.
推薦
Communications Hubs and Protocol Bridges
The STM32F105VBH6 is well suited to protocol-bridge products that connect embedded serial devices to Ethernet-based management systems. Its connectivity-line architecture provides a natural platform for Ethernet communication, while the 72 MHz Cortex-M3 core handles frame processing, protocol translation, diagnostics, and local configuration. The 128 KB Flash capacity accommodates substantial but not unrestricted firmware, so code size and optional features should be tracked throughout development. A robust design should include watchdog handling, fault-safe restart behavior, link monitoring, and firmware revision management.
推薦
Connected Measurement and Diagnostic Instruments
STM32F105VBH6 can support connected measurement instruments that combine local signal processing with remote configuration and diagnostics. The 72 MHz Cortex-M3 core provides sufficient performance for control sequencing, calibration logic, and communication handling, while the 128 KB Flash and 32 KB RAM fit moderate firmware and working sets. Its 100-LFBGA construction helps limit board area in portable or panel-mounted equipment. Final design work should verify analog-interface requirements, clock accuracy, thermal performance, and the exact exposed-ball assignments and thermal paths specified by STMicroelectronics.
推薦
推薦產品摘要
工程參考資料,適用於 STM32F105VBH6 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM32F105VBH7 | STM32F105V8H7 |
|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 100-LFBGA (10 x 10 mm) | 100-LFBGA (10 x 10 mm) | 100-LFBGA (10 x 10 mm) |
| Processor Core | ARM Cortex-M3 32-bit RISC | ARM Cortex-M3 32-bit RISC | ARM Cortex-M3 32-bit RISC |
| Maximum Clock Frequency | 72 MHz | 72 MHz | 72 MHz |
| Product Line | STM32F105xx connectivity line | STM32F105xx connectivity line | STM32F105xx connectivity line |
| Ethernet Support | STM32F105 connectivity line | STM32F105 connectivity line | STM32F105 connectivity line |
主要差異化特點
- Larger Flash configuration within the same STM32F105V family (對比STM32F105V8H7)
- 72 MHz Cortex-M3 processing in a compact connectivity MCU (對比STM32F105VBH7)
- Connectivity-line positioning for embedded Ethernet designs (對比STM32F105V8H7)
設計說明
Use STMicroelectronics' 100-LFBGA land pattern and package drawing as the controlling PCB geometry. Treat the 10 x 10 mm package as a fine-pitch assembly: define solder-mask openings and paste apertures appropriate to the assembly process, maintain thermal and electrical symmetry, and provide test access where practical. Validate the stack-up, paste volume, reflow profile, and placement tolerances before production to reduce bridged-ball and open-joint risks.
Place every supply decoupling capacitor immediately adjacent to its associated power balls and connect the ground return through the shortest practical path. Follow the manufacturer recommendations for capacitor type, voltage rating, and effective capacitance across the required temperature and frequency range. Separate sensitive analog references and communication circuitry from switching-node and high-current return paths to prevent supply ripple from degrading measurement and Ethernet performance.
Plan clock, Ethernet, and other high-speed signals as continuous controlled-impedance routes where applicable. Avoid stubs, unnecessary test-pad breaks, and long parallel runs over discontinuous reference planes. STMicroelectronics reference designs and the manufacturer pin-description tables should be reviewed for recommended peripheral placement. For Ethernet implementations, preserve the required component placement and isolation strategy established by the selected PHY and reference design.
Do not treat a cross-reference equivalence as proof that a replacement is production-ready. Confirm the exact 100-LFBGA ball map, operating limits, memory configuration, temperature grade, peripheral set, qualification status, and device-driver behavior. The 128 KB Flash limit of STM32F105VBH6 should also be tracked in firmware size reports, especially when optional communications stacks and diagnostic features are enabled.
合規資訊
Compliance status requires confirmation from the manufacturer product page or current material declaration for the exact ordering code.