STMicroelectronics

STM32L152VCH6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics

Référence : STM32L152VCH6 ✓ Actif
1.8 V to 3.3 V Vdss 100-UFBGA (7 x 7 mm) Package 32 MHz Speed 256 KB (256K x 8) Memory
MOQ : 1 |

STM32L152VCH6 Présentation

STMicroelectronics STM32L152VCH6 is a 32-bit ARM Cortex-M3 microcontroller with a 32 MHz maximum CPU frequency, 256 KB of Flash memory, and a 100-UFBGA 7 x 7 mm package. It combines an embedded MCU core, program memory, SRAM, and low-power peripherals in a compact surface-mount package suited to space-constrained embedded systems.

A microcontroller is a semiconductor device that integrates a CPU, memory, and peripherals into one programmable component. The STM32L152 belongs to STMicroelectronics' STM32L1 family, where low-power design requirements are combined with a 32-bit Cortex-M3 processing architecture. Its position between a general-purpose microcontroller and a dedicated application controller makes it suitable for products that need flexible firmware, low standby power, and multiple communication or sensing functions.

The verified device specification identifies a 32-bit Cortex-M3 core, 32 MHz operating frequency, and 256 KB of Flash organized as 256K x 8. The exact SRAM capacity, operating-voltage range, ADC resolution, interface inventory, and detailed timing ratings should be confirmed in the manufacturer datasheet before schematic capture or firmware configuration. The LCD-related description associated with this device further indicates suitability for embedded human-interface applications.

The STM32L152VCH6 uses a 100-UFBGA package measuring 7 x 7 mm. This dense land-grid array requires a multilayer PCB with vias, fine-pitch routing, and careful escape routing from the package balls. Unlike a leaded package, the UFBGA has no protruding leads, which supports compact designs but increases assembly and inspection complexity.

Typical applications include low-power sensor nodes, industrial monitoring equipment, portable data loggers, medical and health monitoring products, compact control modules, and connected embedded products. The 32 MHz Cortex-M3 core can execute control logic, protocol handling, and display-related tasks, while the low-power STM32L1 platform is appropriate for products that spend substantial time in low-energy operating states.

Design work should begin with the manufacturer pin-description table and reference design for the 100-UFBGA footprint. Confirm exposed-pad or thermal-array requirements, power pins, decoupling, programming access, reset behavior, and all peripheral multiplexing before layout release. PCB assembly also requires suitable stencil, paste, reflow, and X-ray inspection plans because the 100-ball geometry can hide solder-joint defects.

This product page combines the exact ordering code and verified catalog description with focused guidance on package complexity, low-power design checks, and sourcing workflow. It is intended to help engineers identify the correct MCU, assess board-level implications, and request a quote without replacing the manufacturer datasheet as the final design authority.

Alternatives de remplacement direct pour STM32L152VCH6 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec STM32L152VCH6 (même facteur de forme et même empreinte) — différant par Flash Memory, Product Type.

STMicroelectronics
Flash Memory: 256 KB
Product Type: 32-bit ultra-low-power microcontroller
Comparer avec STM32L152VCH6 →

STM32L152VCH6D

✅ Remplacement direct
📦 100-UFBGA (7 x 7 mm)
Same 100-UFBGA footprint, 32 MHz Cortex-M3 core, and 256 KB Flash; the D suffix identifies a distinct ordering or qualification variant requiring datasheet verification

📋 Alternative de référence (hors catalogue)

STM32L151VCH6

✅ Remplacement direct
STMicroelectronics
📦 100-UFBGA (7 x 7 mm)
32-bit ultra-low-power microcontroller · Arm Cortex-M3 · 32 MHz · 256 KB · 256K x 8 bits · 32 KB · 8 KB · 1 USB interface

Contactez-nous pour le prix

Voir la fiche technique →

STM32L152VCH6A

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 100-UFBGA (7 x 7 mm)
Same family, 100-UFBGA footprint, 32 MHz core, and 256 KB Flash; A suffix changes the ordering or qualification condition by 0 percent in the verified core ratings

📋 Alternative de référence (hors catalogue)

STM32L152VCH6B

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 100-UFBGA (7 x 7 mm)
Same family, 100-UFBGA footprint, 32 MHz core, and 256 KB Flash; B suffix distinguishes an ordering condition without changing the verified core ratings

📋 Alternative de référence (hors catalogue)

STM32L152VCH6E

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 100-UFBGA (7 x 7 mm)
Same family, 100-UFBGA footprint, 32 MHz core, and 256 KB Flash; E suffix distinguishes an ordering condition without changing the verified core ratings

📋 Alternative de référence (hors catalogue)

STM32L152VCH6 Valeurs maximales et caractéristiques électriques

Product Type 32-bit ARM Cortex-M3 microcontroller
Manufacturer STMicroelectronics
CPU Core ARM Cortex-M3
Maximum CPU Frequency 32 MHz
Architecture 32-bit
Flash Memory 256 KB (256K x 8)
Operating Voltage Range 1.8 V to 3.3 V
ADC Resolution 12-bit
Boîtier 100-UFBGA (7 x 7 mm)
Type de montage Surface mount
Package Pin Count 100 pins
Wake-Up Time 8 us

Guide de configuration des broches du STM32L152VCH6 100 pins

Configuration des broches du STM32L152VCH6 (boîtier 100 pins). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 100 pins pour le STM32L152VCH6

Aucune donnée de brochage détaillée disponible pour STM32L152VCH6.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

STM32L152VCH6 convient pour 6 applications: Low-Power Sensor Nodes, Industrial Monitoring Equipment, Portable Data Loggers, Medical and Health Monitoring, Compact Control Modules, Display-Based User Interfaces.

🧩

Low-Power Sensor Nodes

The STM32L152VCH6 fits compact sensor nodes that periodically acquire measurements, evaluate local logic, and return to a low-energy state. Its 32 MHz ARM Cortex-M3 core provides more than enough computational headroom for sensor conditioning, filtering, and packet preparation, while the documented 8 us wake-up time supports responsive event-driven operation. The 256 KB of Flash also provides practical room for application code, drivers, configuration data, and update logic. A designer should use the low-power modes described in the manufacturer datasheet, minimize always-on peripherals, and size the supply so battery or energy-harvesting systems meet their average-current target.

🏭

Industrial Monitoring Equipment

The STM32L152VCH6 is appropriate for industrial monitoring modules that combine sensor inputs, local status indication, data logging, and communications. Its 32 MHz Cortex-M3 processor can execute control loops and communication stacks, while 12-bit ADC capability supports the 1.8 V to 3.3 V operating range identified in the product documentation. The compact 100-UFBGA 7 x 7 mm package helps reduce board area in distributed monitoring devices. Production designs should verify the exact ADC channels, timer functions, communication peripherals, isolation requirements, and operating-temperature grade before committing the schematic.

📱

Portable Data Loggers

A portable data logger benefits from the STM32L152VCH6 combination of a 32-bit processor, 256 KB Flash, low-power wake-up behavior, and a compact package. The MCU can coordinate sensors, timestamps records, manage local storage, and prepare data for transfer while the device spends most of its operating life in a reduced-power state. The 7 x 7 mm UFBGA also helps meet enclosure constraints. Firmware designers should implement wear-aware logging, validate flash write timing, and use the exact SRAM capacity from the manufacturer datasheet when sizing buffering and communication buffers.

💊

Medical and Health Monitoring

The STM32L152VCH6 can serve as the control MCU in compact health-monitoring products that collect sensor measurements, run local algorithms, and communicate with a host device. Its 32 MHz Cortex-M3 core supports deterministic control and data-processing tasks, while the low-power STM32L1 architecture suits products expected to operate for long periods between interactions. Medical designs must additionally verify electrical isolation, noise performance, applicable safety requirements, and the precise analog and communication peripherals. The MCU should be paired with an approved power architecture and validated as part of the complete medical system.

🔧

Compact Control Modules

The STM32L152VCH6 works well in space-constrained control modules that need more processing capability than a basic 8-bit controller. The 32-bit Cortex-M3 core supports multitasking, protocol handling, and responsive control algorithms, while 256 KB of Flash accommodates a meaningful embedded application. Its 100-UFBGA package can reduce board footprint compared with leaded microcontroller packages, although the multilayer PCB and fine-pitch assembly requirement must be included in the product plan. Engineers should verify pin multiplexing and peripheral availability for every connected actuator, sensor, and interface before layout.

📺

Display-Based User Interfaces

The STM32L152VCH6 is suitable for compact user-interface controllers requiring more capability than a basic display driver. Its 32 MHz Cortex-M3 core can manage screen updates, input handling, application logic, and communication, and the family is associated with LCD-oriented applications. The 100-UFBGA 7 x 7 mm package helps limit the controller footprint in handheld and embedded products. The specific segment or LCD interface, external display-memory requirements, update rate, and available I/O pins must be confirmed from the exact family datasheet before the display interface is assigned.

Récapitulatif des produits recommandés

STM32L152VCH6D Same MCU family and 100-UFBGA package ordering variant Utilisé dans : Low-Power Sensor Nodes, Industrial Monitoring Equipment, Portable Data Loggers, Medical and Health Monitoring, Compact Control Modules, Display-Based User Interfaces STM32L151VCH6 STMicroelectronics Utilisé dans : Low-Power Sensor Nodes, Industrial Monitoring Equipment, Portable Data Loggers, Medical and Health Monitoring, Compact Control Modules, Display-Based User Interfaces
What are the key specifications of STM32L152VCH6 that engineers should know?
The STM32L152VCH6 is a 32-bit ARM Cortex-M3 microcontroller rated up to 32 MHz with 256 KB of Flash memory in a 100-UFBGA 7 x 7 mm package. The verified catalog description also identifies 12-bit ADC capability and an 8 us wake-up time. According to the manufacturer product documentation, engineers should additionally confirm SRAM capacity, complete peripheral assignments, and absolute electrical limits in the STM32L152 datasheet before finalizing the design.
Where can I download the STM32L152VCH6 datasheet PDF?
The STM32L152VCH6 datasheet is available through the manufacturer product portal and through electronic-component document links associated with the exact ordering code. The manufacturer datasheet is the controlling document for pin assignments, memory maps, electrical characteristics, peripheral limits, and package drawings. Use the official STM32L152 family documentation and confirm that the revision applies to the VCH6 variant before using it for production release.
Where can I find the STM32L152VCH6 pinout?
The STM32L152VCH6 pinout is documented in the manufacturer datasheet under the 100-UFBGA package information and pin-description tables. Because this is a 100-ball land-grid array, the drawing must be interpreted together with ball numbers, power-supply balls, ground balls, and any exposed thermal or ground-array requirement. Request the current manufacturer documentation and use its package drawing as the authoritative PCB footprint reference.
What is the STM32L152VCH6 package and footprint?
The STM32L152VCH6 uses a 100-UFBGA package measuring 7 x 7 mm. Its 100-ball surface-mount geometry supports compact embedded products but requires a multilayer PCB, fine-pitch escape routing, and controlled assembly. The verified product description confirms the package dimensions, while pin-ball locations, solder-mask design, paste pattern, and assembly process requirements must be taken directly from the manufacturer package drawing.
How much Flash memory and SRAM does STM32L152VCH6 have?
The STM32L152VCH6 has 256 KB of Flash memory organized as 256K x 8. The SRAM capacity is not stated in the verified product summary and must be checked in the manufacturer datasheet before sizing buffers, sample records, protocol stacks, or display framebuffers. Use the exact STM32L152VCH6 memory map and linker configuration rather than assuming that SRAM size is identical to other members of the STM32L1 family.
Is the STM32L152VCH6 suitable for low-power sensor applications?
The STM32L152VCH6 is suitable for low-power sensor applications because it belongs to the STM32L1 low-power MCU family and has a documented 8 us wake-up time. Its 32 MHz Cortex-M3 core can process measurements and communications while the system remains in a low-energy state between events. Final suitability depends on the selected sleep mode, sensor duty cycle, regulator efficiency, and measured board-level current.
Where to buy STM32L152VCH6 online?
Use the Request a Quote form on this page to request STM32L152VCH6 availability, authorized-channel sourcing, and order handling. The exact ordering code identifies the 32 MHz Cortex-M3 MCU with 256 KB Flash in the 100-UFBGA package. The request should state the required quantity, tray or reel packaging preference, target date, and shipment destination so the supply response matches the assembly plan.
What is the price of STM32L152VCH6?
The current commercial price for STM32L152VCH6 should be obtained through the Request a Quote form on this page. Quote scope can depend on quantity, package shipment form, lead time, and authorized-channel availability. The structured pricing area on this page is intended to present the current commercial response without embedding a static price that could become inaccurate before the next quotation.
What is the lead time for STM32L152VCH6?
The current lead time for STM32L152VCH6 must be confirmed through the Request a Quote form on this page. Include your required quantity, approved vendor list, target receiving date, and whether the MCU must arrive in the package shipment form specified by your assembler. Supply timing can vary with lot availability and production planning, so it should be accepted only in the quotation response.
Is STM32L152VCH6 in stock?
Current stock for STM32L152VCH6 should be confirmed through the Request a Quote form on this page. Provide the quantity and required shipment form so the response reflects a usable allocation rather than an unqualified status statement. For production planning, ask for lot traceability, date-code information, and confirmation of the exact 100-UFBGA package and ordering suffix.
What can replace STM32L152VCH6 as a drop-in MCU?
The closest drop-in candidate is STM32L151VCH6, which the manufacturer-family comparison identifies as an equivalent 32 MHz, 256 KB-class STM32L1 device in the same 100-UFBGA form factor. However, replacing a programmed design also requires checking peripheral availability, pin multiplexing, memory map, clock configuration, low-power behavior, and firmware support. No verified cross-manufacturer substitute was identified, so an engineering review is required before substitution.
Is STM32L152VCH6 the same as STM32L151VCH6?
The STM32L152VCH6 and STM32L151VCH6 are closely related STM32L1 devices with a 32 MHz Cortex-M3 core, 256 KB Flash class, and 100-UFBGA package representation. They are not automatically identical for every design because USB, peripheral, and low-power feature sets may differ within the family. According to the family comparison, confirm the exact peripheral list and pin multiplexing in the manufacturer datasheet before deciding whether one can replace the other.
STM32L152VCH6 vs STM32L151VCH6: which is better for an embedded control design?
Choose the STM32L152VCH6 when its documented peripherals and interfaces satisfy the design, and choose the STM32L151VCH6 when its feature set provides a closer fit or an established alternate platform. Both are associated with the same 32 MHz Cortex-M3 and 256 KB Flash configuration in a 100-UFBGA package, but peripheral availability and exact pin assignments remain decisive. Review the family comparison and both datasheets rather than selecting solely by package and clock speed.
When should I choose STM32L152VCH6 over STM32L151VCH6?
Choose the STM32L152VCH6 when it provides the specific communication, sensing, display, or low-power feature required by the product and the corresponding firmware driver is available. Consider the STM32L151VCH6 when that part's verified peripheral set better matches the board and qualification constraints. Both devices share the key 100-UFBGA, 32 MHz, and 256 KB Flash identifiers, so the decision should be based on complete datasheet comparison rather than package interchange alone.
What is the best STMicroelectronics equivalent for STM32L152VCH6?
STM32L151VCH6 is the best supported same-family STMicroelectronics alternative identified for STM32L152VCH6 because it matches the 100-UFBGA package, 32 MHz class, and 256 KB Flash configuration. Same-brand temperature or ordering variants may also exist, but each must be checked for its exact suffix and assembly form. The manufacturer datasheet and family comparison should determine whether pin, peripheral, and firmware compatibility are sufficient.
How should a PCB be designed around the STM32L152VCH6 100-UFBGA package?
Design the PCB around the exact manufacturer land pattern, including all 100 balls, power and ground distribution, and any exposed thermal or ground array. Use a multilayer board with short escape routes from the fine-pitch BGA, place decoupling capacitors close to the relevant supply pins, and provide clean access to programming and reset signals. Validate the footprint with the assembly house because pad, mask, paste, and stencil designs are process-dependent.

Données de référence d'ingénierie pour STM32L152VCH6 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose STM32L152VCH6 when the product needs the STM32L152 family feature set, including the required low-power behavior and any display, sensing, USB, or communication functions confirmed in the exact datasheet. Its 32 MHz Cortex-M3 core, 256 KB Flash, 12-bit ADC, and 100-UFBGA package make it suitable for compact embedded products. Evaluate STM32L151VCH6 when its peripheral set is a closer fit or when an established STM32L1 software path already supports it; the matching package and core ratings simplify review, but they do not eliminate pin-multiplexing and firmware checks. The STM32L152VCH6D, A, B, and E suffix variants may be suitable for specific ordering or qualification conditions, so compare the exact suffix rather than treating them as automatic equivalents. No cross-manufacturer pin-compatible substitute was established, meaning a second-source strategy should not rely on an assumed drop-in part.

Comparaison avec les alternatives

Paramètre Ce produit STM32L152VCH6D STM32L151VCH6 STM32L152VCH6A STM32L152VCH6B STM32L152VCH6E
Package 100-UFBGA (7 x 7 mm) 100-UFBGA (7 x 7 mm) 100-UFBGA (7 x 7 mm) 100-UFBGA (7 x 7 mm) 100-UFBGA (7 x 7 mm) 100-UFBGA (7 x 7 mm)
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
CPU Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 256 KB (256K x 8) 256 KB (256K x 8) 256 KB (256K x 8) 256 KB (256K x 8) 256 KB (256K x 8) 256 KB (256K x 8)
Architecture 32-bit 32-bit 32-bit 32-bit 32-bit 32-bit

Principaux différenciateurs

  • Full STM32L1 feature set in a compact 100-UFBGA (vs STM32L151VCH6)
  • Exact 7 x 7 mm BGA footprint preserves board area (vs STM32L152VCH6D)
  • Compact low-power processing platform (vs STM32L152VCH6A)

Notes de conception

Use the manufacturer land pattern for the 100-UFBGA 7 x 7 mm package and preserve access to all required programming, reset, clock, and power balls. A multilayer PCB with short escape routes, dedicated ground reference planes, and carefully placed decoupling is important for a 100-ball footprint. Validate pad geometry, solder-mask openings, paste apertures, and stencil reduction with the selected assembly process before production.

Confirm the exact supply pins, voltage ranges, and decoupling requirements in the STM32L152 datasheet before assigning the 1.8 V to 3.3 V operating range to the board architecture. Place the required bulk and high-frequency capacitors close to their associated supply and ground balls, provide a low-impedance ground path, and account for startup current in the regulator and power-source design.

Do not treat a matching package, clock rate, and Flash size as sufficient proof of interchangeability. Before substituting STM32L151VCH6 or another suffix variant, compare peripheral availability, alternate-function mapping, interrupt configuration, memory organization, clock trees, low-power modes, startup behavior, and the device's operating-temperature and qualification conditions.

The compact 100-UFBGA package has limited exposed heat-dissipation area relative to larger leaded packages. Use the manufacturer thermal data to determine whether additional copper, thermal vias, or board-area spreading is required. Estimate worst-case junction temperature from actual operating voltage, CPU utilization, ambient temperature, and the actual PCB thermal resistance rather than relying only on the ambient operating-temperature grade.

Plan programming and debug access before routing the fine-pitch BGA. Keep sensitive analog or sensor paths away from noisy switching nodes and high-current return paths, and provide the pin-description table and alternate-function map to the PCB designer. After routing, perform high-density design-rule checks and compare every escape route against the manufacturer's ball map to prevent mirrored or shifted assignments.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The verified product summary does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm each declaration for the exact ordering suffix using the current manufacturer documentation.

Données vérifiées le : 2026-11-14 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

STM32L152VCH6 datasheet STM32L152VCH6 datasheet pdf STM32L152VCH6 pinout STM32L152VCH6 footprint STM32L152VCH6 specifications STM32L152VCH6 32MHz Cortex-M3 STM32L152VCH6 256KB Flash STMicroelectronics STM32L152VCH6 STM32L152VCH6 equivalent STM32L152VCH6 replacement STM32L152VCH6 vs STM32L151VCH6 STM32L152VCH6 price STM32L152VCH6 stock STM32L152VCH6 low power sensor

Composants & termes associés

STMicroelectronics STM32L152VCH6 STM32L152VCH6D STM32L151VCH6 ARM ARM Cortex-M3 STM32L1 STM32L152 microcontroller MCU 32-bit microcontroller embedded system low-power MCU 100-UFBGA BGA package surface mount SMD 32 MHz 256 KB Flash 12-bit ADC 1.8 V to 3.3 V 8 us wake-up time LCD controller industrial monitoring
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ